Slow to navigate - only initially

I'm having a unique problem with my new iMac. When I open a new browser instance, it loads my home page fine. However, when I try to navigate somewhere else, there is an extended delay. This delay is only there for the first 1 or 2 sites I try to hit, then it's fast as lightening.
I thought it was a sleep issue, but this happens when the iMac hasn't even had a nap. Am I missing a setting? Right now my Energy is set to [Computer - 1 hour / Display - 15 min]. Thoughts?

I'm having the same problem and it's driving me nuts.
I've just addressed the issue at apple support.
A quick searh on google will tell you a lot of Imac 27" have the same problem and nobody can solve. As far as I can see.

Similar Messages

Safari 4.0 is slower to show only the first web site

Safari 4.0 is slower to show only the first web site. Once Safari is open, the first site may take 4 to 5 seconds to show, and Console indicates:
11/06/09 17:15:09 [0x0-0x99099].com.apple.Safari[1029] Debugger() was called!
Subsequent sites load in just one second or so (and Console does not show any messsage).
If I quit Safari and open it again, the same issue arises: it takes longer to show the very first site (whatever it is) but not the subsequent ones (for which it is quicker), and Console shows a similar string on such very first site (but not the subsequent ones). Other examples of such string:
11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
11/06/09 17:17:06 [0x0-0x9c09c].com.apple.Safari[1036] Debugger() was called!
How to prevent such Console message and make Safari also quick to show the very first page or site after opening Safari?
Thanks.

Not to get your hopes up, did you ever hear or figure out any resolution to this. I have a (slightly) similar issue passed along from one of my bosses, that when he upgraded to 4.0.2 it started causing issues with FTP logins through Safari. He would have to enter passwords multiple times on the same site. So initial entry worked and then every subsequent event needed a password entry. Just curious if this could be part of your problem. I tried to emulate the problem on my machines and only on the one I have the 4.0.2 update does it happen.

Very slow BT broadband, only 200Kbps for download

Very slow BT broadband, only 200Kbps for download. It started since Tuesday. Usual speed is 3 to 4Mbps.
Any problem in the Liverpool area?
I have tried the btspeedtester. The results are
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
200 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 200 Kbps
For your connection, the acceptable range of speeds is 100-250 Kbps.
Additional Information:
Your DSL Connection Rate :287 Kbps(DOWN-STREAM), 1152 Kbps(UP-STREAM)
IP Profile for your line is - 253 Kbps
2. Upstream Test: -provides background information.
Upload Speed
895 Kbps
0 Kbps
1152 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 895 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1152 Kbps

check exchange here http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1)
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

3 year old iMac 24 running OS10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem?

3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Simple Soap Test, VERY SLOW with XP, only 5 calls per second !

Hello,
I'm just starting developing a web service. My first test shows a very slow performance of only about 5 calls per second:
Windows XP client localhost -> Windows XP server: 2000 calls per second
Windows XP client in VM on server maschine -> Windows XP server: 4,5 calls per second
Windows XP client over 100 MBit LAN -> Windows XP server: 2000 calls per second: 4,5 calls per second
Windows XP client over 1000 MBit LAN -> Windows XP server: 2000 calls per second: 4,5 calls per second
So you might think, that is it, but - using identical jars:
Mac OS X, 10.6 client -> Windows XP server: 880 calls per second
Windows XP client -> Mac OS X 10.6 server: 4,5 calls per second
So the problem seems to be the client setup on an Windows XP system.
This is the service code:
package net.metasafe.soapbenchmark.server;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService
public class TestLib {
     private int count = 0;
     public TestLib() {
          // nothing to do
     @WebMethod
     public int div(int a, int b) {
          this.count++;
          if (b == 0)
               throw new IllegalArgumentException("b must not be 0!");
          return a / b;
     @WebMethod
     public int getNumberOfCalls() {
          return this.count;
     @WebMethod
     public void resetCount() {
          this.count = 0;
}This is the sevice publisher:
package net.metasafe.soapbenchmark.server;
import javax.xml.ws.Endpoint;
class ServicesPublisher {
     public static void main(String[] args) {
          if (args.length != 2) {
               System.out.println("2 Arguments required: <servername/IP> <port>");
               return;
          String url = "http://" + args[0] + ":" + args[1] + "/services";
          System.out.println("Publishing TestLib service at url '" + url + "'.");
          Endpoint.publish(url, new TestLib());
}This is the client code:
     public static void main(String[] args) throws MalformedURLException {
          if (args.length != 3) {
               System.out
                         .println("3 Arguments required: <servername/IP> <port> <number of calls>");
               return;
          int num = Integer.parseInt(args[2]);
          URL url = new URL("http://" + args[0] + ":" + args[1]
                    + "/services?wsdl");
          System.out.println("Conneting to service '" + url + "' .... ");
          QName qname = new QName("http://some_uri/",
                    "TestLibService");
          TestLibService service = new TestLibService(url, qname);
          TestLib tl = service.getTestLibPort();
          System.out.println("Connected !");
          // reset count
          tl.resetCount();
          System.out.println("\nPerforming " + num + " calls ...");
          long starttime = System.currentTimeMillis();
          int i;
          for (i = 1; i <= num; i++) {
               tl.div(i, 2);
               if (i % 100 == 0)
                    System.out.println(i);
          long t = System.currentTimeMillis() - starttime;
          System.out.println("Performed " + tl.getNumberOfCalls() + " calls in "
                    + (t / 1000.0f) + " seconds.");
          System.out.println("Calls per second: " + (num * 1000.0f / t));
          System.out.println("Done");
     }Any idea, why this is so slow, if the client runs on an Windwos XP (Pro) system ?
Is there anything I have to be aware of when choosing the QName ?
Best regards
Marc

Hello,
no one any idea on for this ?
How many calls do you get normally on Windows XP machines ?
Regards
Markus

Hi my name is Timothy and I have had my iPod Touch 4th Generation 32 GB for about 8 months and when I got it, it was fast but now i updated it to 6.1.6 and it goes really slow i have only used 6.8 GB of space on it and there is 21.7 GB left on it.

Hi my name is Timothy and I have had my iPod Touch 4th Generation 32 GB for about 8 months and when I got it, it was fast but now i updated it to 6.1.6 and it goes really slow i have only used 6.8 GB of space on it and there is 21.7 GB left on it.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
The try
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

MacPro Quad Core 32g Ram running slow Logic using only 9g in Activity Monitor

Well its taken a while, but this is my first foray into the world of forums! I'm so hacked off with this regular problem and havent been able to find anything anywhere to solve it i thought i'd see if anyone has any similiar issues and maybe even a solve to it.
So.... im an orchestrator and producer and after my mid 2008 Macbook Pro with 8g ram started freezing up i invested in this 3 years ago -
Mac Pro 2x 2.4ghz Quad Core intel Xeon and stuck in 32gb of lovely Crucial RAM and 3 seperate internal 1TB drives with one for operating system (10.6.8), one for Audio recording/saving and one for all my sample libraries.
32gb ram - should be enough i thought!
So i regularly run at least 30 VI's - Ni The giant, Spitfire Orchestral librabies (say 12 string instruments up to 0.69g per load) LASS strings, plus perc STYLUS, ABBEY road drums, Trillian basses (acoustic/electric), ominisphere etc etc. So pretty hefty sample instruments. But theyre sooo nice!!
In addition, the 32 bit server will come alive (NOT! So unstable i find) with my Waves plugs etc.
Looking at ACTIVITY MONITOR however i might be not touching 9 gig (and sometimes even less) of usage for Logic, and only say 800MB for 32 bit server and have NOTHING else open - and what do i find .....
- Mouse lag and cant really do anything with the mouse whilst playing the track - cant adjust volume - too slow, zooming problems
- Takes a good 2-3 seconds for track to stop playing
Dont get System OVERLOADS so much, its just that the system goes REALLLLLY slow.
What ive tried- - -
- Running Mountain Lion off another drive (havent had time to install it and wanted to be sure everything worked etc)
- Tried all audio prefs - large/small buffers/threads etc and yes i am on 1024.
in a nutshell how come with 32g RAM everything is so slow when barely using 10g of that???????
I dread getting to the end of a project cos i know im gonna be freezing so much, but with so much editing all the time for the orchestral parts i need everything unfrozen and working.
Sorry if this is long winded but wanted to describe what im experiencing.
Any feedback most welcome! Thankyou in advance.
Mac Pro 2x 2.4ghz Quad Core intel Xeon 32g RAM, 3TB storage
10.6.8
Logic Pro 9.1.8

Hi
A few thoughts:
julian6400 wrote:
In addition, the 32 bit server will come alive (NOT! So unstable i find) with my Waves plugs etc.
The 32bit server is a pita: Waves v9 are 64bit compatible (they run fine). 32 bit VI's can be run outside Logic using Vienna Ensemble Pro (see later)
julian6400 wrote:
So i regularly run at least 30 VI's - Ni The giant, Spitfire Orchestral librabies (say 12 string instruments up to 0.69g per load) LASS strings, plus perc STYLUS, ABBEY road drums, Trillian basses (acoustic/electric), ominisphere etc etc. So pretty hefty sample instruments. But theyre sooo nice!!
Some of these VI's are extremely CPU hungry: Abbey Rd drums for example, really do hammer the CPU. What does Logic's Performance meter show in the way of CPU load. What does Activity Monitor show regarding CPU load?
With 32G of RAM, this should not be the issue, but you might have general CPU problems (see above), and you may also have Sample disk streaming limitations if all the Loibraries you mention are on the same drive. How does Activity Monitor look regarding disk access? You might find it helpful to add a second drive and split the sample libraries across 2 for faster disk access.
I presume that you have plenty of free space on the System drive?
Logic can get sluggish if the Undo info gets way too big, and also if there are loads of regions in the Arrange: check Options:Project Information.
Many are finding some benefits (me included) by running the VI's in Vienna Ensemble Pro:
Better CPU load distribution than directly in Logic
"Persistant Samples": they can remain loaded whilst you switch Logic Projects
Logic is effectively running much less itself, so generally flies.
32bit Plugs hosted separately in VEP so no 32bit Bridge issues in Logic
Something to consider,though perhaps not yet, would be setting up a Slave computer using VEP.
CCT

Firefox slows greatly on only one of my three computers. I have had the slow one worked on by a tech. IE works at normal speed for Firefox.

Writing is the greatest problem. If I enter >2 characters/sec, some characters will be skipped. Opening emails is very slow.
I have no problems on my wife's desktop or my laptop - only on this desktop.
I am using WIN7.

I got fed up with costco's iPods (I always got bad ones). So I went and got mine at the Apple Store. I suggest you do the same. About the box covers John Lennon is the newest cover its better if you look at the week number instead. To find the week number just look at the 4th and 5th numbers. So if I had 6J148 I would have week 48. The higher the number the newest it is but I think for 08 models it would be like 1A801 instead of 1A701. I think the third number represents the year

Slow VF04 Process Only on One Company Code

We have 5 company codes on our system. Last month we create new company code. No problem in Devevelopment or QA Server.
However, when we transporteded this new company code configuration to Production server, we got VF04 problem.
VF04 very slow for only one company code (existing company code), it took more than 30 minutes for 1 plant and 1 business date (normally it took about 1-3 minutes for 1 plant).
The longest time in this process in SM50 is "Sequential Read on CE4xxxx table". What could we do to check why VF04 on existing company code is very slow while in other company codes (including the new one) running normally.
Thank you so much.

If the two notes are not applicable, then have a look at this
Note 1996268 - Performance problem while generating billing documents using VF04
If this is also not the root cause for the issue you are facing, then share the following note to your Security team as I already indicated and ask them to follow the steps listed out in this note as this is purely technical related issue and not a functional related issue.
Note 841758 - Procedure when you experience performance problems
G. Lakshmipathi

My mac book pro is running very slow. Not only when running the internet but simply in general. What can I do to resolve this? I am thinking about resetting it to factory settings. Will this work. I believe my mac is about 4 years old.

My mac is about 4 years old. I believe it started with lepoard but im not sure.

Learn about what causes slow down issues here
Why is my computer slow?
Backup your users files to a external drive (not only TimeMachine as it will restore the problem)
Most commonly used backup methods
Fix your machine
..Step by Step to fix your Mac
Then do a defrag
How to safely defrag a Mac's hard drive
Then also check out other issues
Diagnosing network issues
IMO a 4 year old laptop is too dated to run the new OS X bloated versions, it should have stuck with 10.6.8 max, but it's likely too late to go back now as you have too many files and programs in the later OS X versions.
However if you don't care and have basic type files that are neutral state file formats, like they will work on any Mac/PC or Linux machine (like pictures, music files etc) then you might be interested in going back to Snow Leopard for performance.
How to revert your Mac to Snow Leopard
For Snow Leopard Speed Freaks

Randomly slow, yet consistently slow, performance on only one project

After reading through many of the FAQs before posting this, I'm still at a loss for a solution though I admit I haven't exhausted all of my options just yet (I'm waiting on the more drastic ones - like throwing the computer).
I can scrub and play without problem, but any time I alter anything (trim, delete, even razor a clip in the timeline) Premiere hangs for about 2 minutes after that mouse click... and any mouse click aside from play/stop. I've been editing 1080p .mov files shot from a Canon 7d for a couple months now (my free time is rather limited). I'm using an iMac with OS X (3.06 GHz Core 2 Duo, 4 GB 800 MHz, etc.) and I've double checked that all updates for it and CS5 are up to date. The source files are kept on an external raid drive attached via USB 2.0 and I haven't had any issues. I know these factors break multiple rules listed in this forum, but, like I said, I haven't had any problem 'till about 48 hours ago and without obvious cause.
Since then, I've run multiple cache cleaners, virus software, etc., I've re-saved under different names, I've copied and pasted everything into new projects, I've copied the source files onto my internal drive (effectively giving me far less than the suggested 20% free space necessary, though) and reassigned them to a duplicate project, and I've tried beginning from scratch with importing only a few of the .mov files from my shoot into a new project. Unfortunately, the only one that has not repeated the problem is the last option. I'd rather not have to start editing from scratch. I refused to believe there is simply too much information in the timeline (barely 20 minutes with maybe a hundred cuts from about 50 or so separate source files). My only thoughts at this point are that the footage became corrupt (then why can I still edit it from a brand new project?), the computer has an undetectable virus (why does anything else beside this project, or projects with matching timelines, work?), my software/hardware is inadequate (nothing changed within the last week, or since the beginning of my project).
Do I need to uninstall and reinstall? Do I need to go back down to CS3, which never gave me such problems? Do I need to make the switch to Final Cut because I've just about had it with Premiere's difficulties?
I really hope there's an obvious solution that I've overlooked. Or any solution...

Which version of Premiere Pro are you running? CS5, 5.0.2, or 5.0.3? What kind of video card is installed? If you are on a Mac with an ATI card and running Premiere Pro 5.0.2, or 5.0.3, reinstall Premiere Pro CS5 and leave it at v. 5.0. Do not update it.
Another possibility is a corrupt sequence. Can you copy/paste your clips from your master sequence to a new one with the same settings. Try that.
You should also know that your system really needs upgrading, or you'll continue to have problems like this. USB 2.0 is much, much too slow for the files you wish to play back. Upgrade to an external FW800 drive and your situation will improve. Also bump up the RAM to max out your iMac (8 or 16 GB) for a better editing experience.
In comparing Premiere Pro CS5 and CS3 versions, CS5 will need more resources because of its nature as a 64 bit application. You'll definitely need a lot more RAM for the system to operate as you would expect it.

Mac freezes and every slow, says free only 69MB (with pic)

Hello,
I have a MBP 2.26 GHZ Intel Core 2 Duo - 2 GB RAM running Lion. For the past couple of months when running Snow leopard it randomly freezes and its slowly down completely and its happening even after updrading to Lion.
I have taken a screen shot of the system memory and it says out of 2GB i have only 69MB left, is this what's causing the slow down. Should I buy an extra 2GB RAM and also will the 2.26GHZ will be able to handle 4GB of RAM
Any help is appreciated.
Thank you

First, open Disk Utility, click on your internal disk on the sidebar, then click "Repair Disk"
Problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:
Resetting the System Management Controller (SMC)
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Slow page loads only since 10.4 upgrades

Hi folks,
Has anyone seen a problem with pages hanging up after updating from earlier OS X's to 10.4? First my wife noticed it when she got her new Mac Book -- an upgrade from 10.2.8 on the old machine. A couple of items would load on a page, but then it hangs up and stalls for a while until finally fully loading. Ordinarily, I'd peg it as just being slow serving of ads to particular sites, but it's not always ad-rich sites. And more so, it's strange that this only started happening in conjunction with starting to use 10.4 to surf the same sites that weren't hanging up before.
Further confirming my belief that it has to do with 10.4, is that upon my upgrading from 10.3 to 10.4 on my G5 a month or so later, I started to immediately notice slow, slow page loads on that machine, too. Particularly, again, on sites that loaded fine with 10.3 just before the upgrade.
I'm also having more problems with mailboxes loading slowly and kicking off-line since the upgrade.
Is there some trick to get 10.4 to behave with regard to requests across the web??
Thanks!!!!
G5 Dual 1.8 Mac OS X (10.4.7) Focusrite Saffire Audio Interface

me too. My mini is wired, but I have the same trouble. I have a PC on the same router, and it has no problem with internet. I've been looking around a while, and it seems like this is a common occurrence and I have not found a fix yet. This is very frustrating. Also, the network status in the network diagnostics window shows the internet failing alot, but even when it's "green" I still can't always load pages.

Navigate to initial task flow in dynamic region with JDeveloper 12c

I have a home page with a dynamic region and three links and I am working with page fragments. The initial bounded task flow is "btfInicio".
The requirement is that in each bounded task flow I have to implement a close button to return to the initial bounded task flow. This is my code:
My Bean for my home page.
public class AdministradorActividades extends DataControlBean {
    private HashMap parametrosGenerales = new HashMap();
    private String taskFlowId = "/WEB-INF/btfInicio.xml#btfInicio";
    private RichRegion regionPrincipal;
    public String gestionarDatosClinicos() {
        taskFlowId = "/WEB-INF/datosClinicos/btfDatosClinicos.xml#btfDatosClinicos";
        refrescarRegion();
        return null;
    public void refrescarRegion(){
        AdfFacesContext adfContext = AdfFacesContext.getCurrentInstance();
        UIComponent region = findComponentInRoot("rPrin");
        adfContext.addPartialTarget(region);
My Home page.
<af:decorativeBox id="db4" theme="medium"
                                                                      inlineStyle="margin-bottom:5px; margin-left:5px; margin-right:5px; margin-top:5px;">
                                                        <f:facet name="center">
                                                            <af:region value="#{bindings.regionDinamica.regionModel}"
                                                                       id="rPrin" partialTriggers="::lCli ::lCon ::lRep"/>
                                                        </f:facet>
                                                    </af:decorativeBox>
My Home page Def:
<taskFlow id="regionDinamica" xmlns="http://xmlns.oracle.com/adf/controller/binding"
                  taskFlowId="${pageFlowScope.managerRegion.taskFlowId}" activation="deferred"
                  parametersMap="#{pageFlowScope.managerRegion.parametrosGenerales}" Refresh="ifNeeded"/>
I have tried this inside a fragment from my bounded task flow "btfdatosClinicos" where I have a button , but doesn't work. The home page is not refreshed:
        AdfFacesContext adfContext = AdfFacesContext.getCurrentInstance();
        AdministradorActividades admActividades = (AdministradorActividades) adfContext.getPageFlowScope().get("managerRegion");
        admActividades.setTaskFlowId("/WEB-INF/btfInicio.xml#btfInicio");
        UIComponent region = findComponentInRoot("rPrin");
        adfContext.addPartialTarget(region);
If I Implement a control flow case inside my bounded task flow "btfdatosClinicos" to "btfInicio" then I can see the page fragment that correspond to the bounded task flow "btfInicio", but if I clic one of the three links, then the action event is not executed.

Hi Miguel,
I think you are complicating the requirement without needing. Why would you put the back button inside your other taskflows? This would be useful just if you are calling those from another bounded taskflows.
Look what you can do;
You can create your links for dynamic regions. Cool. But in your decorative box, in the top facet, you can drag a drop the btfinicion and display it as a link (yes, this will be your back button). and that's it. You don't need to mess with partial triggers or refrescar regiones methods.
Let me know if this doesn't impact your requirement.
By the way, en que pais trabajas?
Saludos

Slow to navigate - only initially

Similar Messages

Maybe you are looking for