Slow to scroll

All of a sudden my Logic Pro X is super slow, even scrolling up and down through the tracks/up and down on the page to see tracks below off the screen, the program is slow, staggers, stops and starts. I have maybe 25 tracks but very little plugins running, never had this problem before, is there a reason I am missing?
I do not have any plugins going that are not native to Logic X Pro
I restarted my computer and the external hard drive I am running the files from, as well as my audio interface?

Thank you so much, I downloaded and ran the program:
When logic x is open, with me simple scrolling up and down the screen with my trackpad on a project with automation I got this (I am using Mavericks still never updated).
I am going to try a brand new project and add automation and see if it happens right away.
Problem description:
Whenever I have automation in my project, the project slows down whenever I try to do something, even as simple as scrolling up and down the screen.
EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 10:52:05 AM EST
Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless:  en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
    Intel Iris Pro -
    NVIDIA GeForce GT 750M - VRAM: 2048 MB
        Color LCD 2880 x 1800
        SyncMaster 1680 x 1050 @ 60 Hz
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 2 days 19:35:44
Disk Information: ℹ️
    APPLE SSD SM0512F disk0 : (500.28 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) /  [Startup]: 499.42 GB (151.74 GB free)
        Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
USB Information: ℹ️
    Inateck   512.11 GB
        S.M.A.R.T. Status: Verified
        EFI (disk1s1) <not mounted> : 210 MB
        KRF Crucial 512 (disk1s2) /Volumes/KRF Crucial 512 : 511.77 GB (204.20 GB free)
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/AVG AntiVirus.app
    [not loaded]    com.avg.Antivirus.OnAccess.kext (14.0 - SDK 10.8) Support
        /Library/Extensions
    [loaded]    jp.co.roland.RDUSB0120Dev (1.5.2 - SDK 10.9) Support
Startup Items: ℹ️
    RDUSB0120Startup: Path: /Library/StartupItems/RDUSB0120Startup
    Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [loaded]    com.google.keystone.agent.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    [running]    com.spotify.webhelper.plist Support
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Flux    Application (/Applications/Flux.app)
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
    googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
    Save to Pocket
3rd Party Preference Panes: ℹ️
    Flash Player  Support
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        KRF Crucial 512: Disk size: 511.77 GB Disk used: 307.56 GB
    Destinations:
        External HD [Local]
        Total size: 2.00 TB
        Total number of backups: 22
        Oldest backup: 2014-05-10 03:45:27 +0000
        Last backup: 2014-12-02 09:51:52 +0000
        Size of backup disk: Excellent
            Backup size 2.00 TB > (Disk size 511.77 GB X 3)
Top Processes by CPU: ℹ️
        65%    Logic Pro X
         6%    coreaudiod
         5%    WindowServer
         4%    Finder
         1%    fontd
Top Processes by Memory: ℹ️
    1.07 GB    Logic Pro X
    945 MB    firefox
    533 MB    Finder
    275 MB    WindowServer
    120 MB    Dock
Virtual Memory Information: ℹ️
    10.18 GB    Free RAM
    3.88 GB    Active RAM
    661 MB    Inactive RAM
    1.69 GB    Wired RAM
    5.01 GB    Page-ins
    27 MB    Page-outs

Similar Messages

  • Cover flow slow to scroll in Vista with Nvidia GeForce 8400M

    I recently purchased a new laptop with vista service pack 1. One issue is the cover flow motion is really slow to scroll compared to my last computer using xp. Does anyone else have this problem or know of a fix?

    I have had the same problem with my new Dell XPS notebook since I bought it in mid Feb. I have googled the problem and a lot of users are also having this problem. Cover flow mode is painfully slow and unuseable. If you find a fix, please post.

  • How to slow Motion Scroll Effects and anchors?

    I am using a down pointing arrow to cue the user to scroll down to the next section. I thought I could automate by linking the arrow to an anchor that is positioned down the page. Cool, it works. However, the jump is so fast that all the fancy Motion Scroll Effects I'm using on the next section are nearly invisible. I see that this site does what I want when you press the "Scroll Down" graphic: Digital Marketing Agency in Johannesburg, South Africa
    Is it possible to slow down the browser scroll when jumping to an anchor, using only Muse?
    Thanks,
    JohnS

    There's no way of controlling the speed of the scroll, other than the distance between your trigger and the anchor points. Since it uses an ease in control, the closer the anchor is to the trigger, the slower the scroll will be and likewise, the further away the anchor, the quicker it scrolls.

  • Premiere Elements 11 + Windows 8 pro = slow timeline scrolling!

    Hi!
    I experience slow redraw of the timeline clips when I scroll,
    which makes it very difficult, slow and unpleasant to edit!
    This in nothing new to you all, as I have read in many posts about this problem!
    And everyone is asking (below these posts) questions like:
    "do you have the latest QuickTime codecs?" or "do you have the latest graphics drivers?"
    or that our pc are slow or that we work with strange video formats or to change to no thumbnail in the clips or that its
    the antivirus fault or whatever.
    It is not all these!
    As I have read:
    -It can happen in many versions of Premiere Elements(maybe in all of them, I don't know)
    -It can happen in both ATI/AMD and NVIDIA graphics cards
    -It can happen in all hardware configurations CPU/motherboards
    -It can happen in all windows versions and both 32/64 bit
    So I am guessing it is not our fault.
    Can Adobe finally fix this problem with an update? It's been so many versions until now!
    please... Is it so difficult?
    Can't the programmers see what are we talking about? Can't they fix the programme?
    Before I bought Premiere Elements 11 I had the 9 version in windows 7(64bit)
    The same problem, slow/laggy timeline redraw when moving back and forth.
    The solution I found was to disable the Aero feature in windows 7!
    And oh my god... the timeline then was so fast and smooth, I was so happy to edit!
    So I compromised with that(disabling aero).
    Recently I have upgrad the same PC to windows 8 pro(64 bit) AND bought Premiere Elements 11. (hoping for speed in every possible way!)
    The slow timeline scrolling still happens in both PRE9 and in PRE11.
    And guess what? in windows 8 pro you can't disable the "aero feature"!!!
    You can only change some visual settings, and even if I disable all of them, nothing changes!
    So are we really stuck with the laggy timeline scrolling in windows 8???
    Premiere Elements 11 is so much faster in all other things (exept the timeline scrolling)
    In the preview window for example. It can play really smooth, in real time WITHOUT render preview
    some pretty difficult compositions I make! multiple layers, with greenbox and many other filter effects!
    Which in Premiere Elements 9 (in the same PC) the preview play was very laggy!
    (don't forget that with aero disabled in PE9(win7), same PC, same complicated compositions, timeline scrolling superfast!)
    I think they made some pretty good graphic card use in the preview play in PRE11!
    I present and edit a youtube show with Premiere Elements with demanding compositing and everyone thinks I use Premiere Pro CS 
    version or After Effects CS. But I don't, I want to be legal and I can't aford the prices of these applications
    so I buy and use the Elements series which are very powerful as well, if you know what to do and HOW to do it!
    See for youselves my show I posted today(in Greek, I am from Greece), which I edited in PRE11.(pefrect greenbox, perfect!)
    http://youtu.be/HdKAKI6P8tU?hd=1&t=1m28s (open in a new window)
    or move time to 1:28 from the below youtube video window.
    But unfortunattely the timeline scrolling made my editing unpleasant and slow!
    My question is: Will I, (now that I have upgraded to windows 8 pro 64bit) have to edit ALL my next shows/videos
    with the slow/laggy timeline scrolling??? please tell me something to hope for...

    I have an ATI/AMD FirePro  v4800 1GB GDDR5 with the latest drivers for this card (8.982.8.3)
    Is my video card not compatible?
    this slow redraw of the timeline happened way before
    and everytime a new driver version came up I had installed it but that didn't change anything.
    Only with aero disabled I would enjoy a fast timeline scrolling in windows 7. (now, not possible in windows 8 pro)
    Bill how can you explain this? Same video card and everytime with the SAME NEW drivers, aero on=slow timeline, aero off=fast timeline!
    Is there some kind of a fix that we can always wait from our graphics card companies to include to new drivers??? (for how long???)
    or maybe is it all up to Adobe and its own programme?
    Are we all supposed to have old video display drivers?
    Can someone make some kind of a poll for people who have this problem to vote to see where this problem apears, in which configurations, in which graphics cards? (assuming they have latest drivers)
    so we all finally know what/where is the problem.
    I love the premiere elements series and thats why I want this to be solved.

  • FF 19 + Newest Adobe Reader = Failure. The newest update to FF with the newest Adobe reader is absolutely horrible. It is slow to load, slow to scroll pages,

    Using FF19 and apparently Adobe reader 11.0.2.0. This new version is HORRIBLE, very slow to scroll pages, and flat out does not work with some work web pages I need. How do I revert to a previous version of Adobe to get back to the old format and layout that works well? I tried disabling the plug-in in FF and it did not change.

    hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox options > applications & scroll down and define the default action for the '''portable document format (pdf)'''.
    [[How to disable the built-in PDF viewer and use another viewer]]

  • Slow PDF Scrolling

    On my 15" rMBP, my PDFs are very slow to scroll.  It will be the only PDF open and I have open each file in it's own window checked.
    Any help will be appreciated!
    Thanks!

    Back up all data. Quit Preview if it's running.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
    Caches/com.apple.Preview
    Containers/com.apple.Preview
    Preferences/com.apple.Preview.LSSharedFileList.plist
    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
    Saved Application State/com.apple.Preview.savedState
    Launch the application and test.

  • Qt4 updated to 4.8.7: Slow text scrolling and higher load time.

    System is fully upgraded, and i just noticed that every qt4 application has become incredibly slow when using QT_GRAPHICSSYSTEM=native (slow dolphin scrolling, slow konsole scrolling)
    It is probably related to text antialiasing, because if i disable subpixel hinting in konsole, it start to scroll fast.
    Reverting back to 4.8.6 fixes it.
    I want to use native instead of raster because:
    1) when used remotely via x2go and ssh, qt apps are very fast using QT_GRAPHICSSYSTEM=native
    2) with QT_GRAPHICSSYSTEM=native one is able to retain RGB subpixel hinting even over trasparent windows.
    I'm using nvidia-340xx 340.76 with a geforce 9800GT and  freetype2-infinality 2.4.12-2 if it matters.
    Anybody can help please?
    -EDIT
    This does not seem to be related to an update of the xorg-server, nor to the graphic driver; i notice the same behaviour when using a remote (fast) vnc connection.
    I bet it is a QT4 bug; someone could test please?
    Last edited by kokoko3k (2015-06-19 15:56:35)

    It is not just the text scrolling under native graphicssystem to be slow.
    All qt4 apps with text edit widgets are now slower to open, even with raster graphicssystem.
    Gambas3 ide takes 6 seconds to start; on 4.8.6 it starts in 2 seconds here.
    Just reported both:
    https://bugreports.qt.io/browse/QTBUG-46700
    https://bugreports.qt.io/browse/QTBUG-46778
    Last edited by kokoko3k (2015-06-19 15:57:14)

  • Since I installed IOS 8.0.2 (was ok on IOS7),on my iPad 4 "photos" don't scroll properly, it freezes and staggers, it's really slow to scroll to the bottom of the page (in Album, Events From My IMac) it's very annoying!

    Since I installed IOS 8.0.2 (was ok on IOS7),on my iPad 4 "photos" don't scroll properly, it freezes and staggers, it's really slow to scroll to the bottom of the page (in Album, Events From My IMac) it's very annoying!

    I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
    Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
    If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.

  • Phone and contacts app freezes, becomes slow and scrolling is jittery

    My setup:
    iPhone 4 with iOS 4.2.1 (8C148)
    I don't have 3G on my CIM (provider BASE.BE), I can only use WiFi to connect to internet. 
    I sync my gmail contact (mail and calendar are turned off) through the iPhone built in Exchange account connector.
    Fetch new data is off, push is off, fetch set to manually, advanced schedule set to manual.   
    I only turn WiFi on once a day, when I'm home, sync contacts and then I turn WiFi off again.
    Spotlight search is turned off.
    Device runs fine, battery life is great (much better than my iPhone 3Gs), I have about 2700 contacts, no duplicates, updates in both directions, everything working perfectly.
    Then without any warning, or even without any use of the phone, this happens: 
    1) The phone and contacts app becomes unresponsive for a few seconds, remains very slow, scrolling becomes jittery or freezes.  When the symptom occurs both apps have this issue.  I assume because both use contacts.  Both apps don't crash, they just get very slow as if they were trying to do something heavy. This does not happen with any particular event, like getting a call or text message. This can happen even at night without any missed calls or text messages send or received.  The symptom does not affect any other app.  For example when I open the iPod app, scrolling though the long list of music is fast, without any freezing or jittery behavior, while the Phone and Contacts app is still very slow.  The problem does not go away by itself.  Hard rebooting the phone does not help.  I assume the problem is not related to any purchased apps because this can happen when none of them are running.
    2) The phone gets really hot.
    3) The battery drains very fast.  I can go from 100% to 0% in under 30 minutes.
    4) CPU usage (use System App to measure) goes from < 20% to >75% or more.
    I notice the symptom mostly when in the 1) phone app, or 2) I feel the phone heat up or 3) in the morning when the phone battery is almost empty when it was full the night before.
    I can fix the problem by 1) turning on WiFi, opening the contacts app.  Then I see the circular indicator in the top left hand corner turning round.  This takes just a few seconds, to sync 1 or 2 contacts en when the indicator disappears, the problem is gone.  Scrolling is fast again.  Problem fixed.  It can take a day or two and the problem comes back.  Do sync trick again and problem gone again, and so on...
    I can also fix the issue by 2) deleting my gmail exchange account, putting it back and syncing everything back.  But like with solution 1) the problem will just returns after a few days.
    I have even tried a full factory reset and manually putting all my apps back.  But again, when I import my gmail contacts, wait a few days and problem returns. 
    I've been having this issue for a few months now and have done quit some research on the subject.  I'm pretty sure I also had the issue on iOS 4.1 and possibly also 4.0.  I did not have the issue in iOS3.  I had the same problem on my iPhone 3Gs which Apple replaced.  I thought the battery was dying.  Now I bought an iPhone 4, same problem. 
    I purchased many system monitor apps to find out what process was causing the problem.  The problem is that none of the apps I found report CPU or memory consumption per individual process.  So I only know CPU goes from below 20 to 75% and more, but I can't pinpoint which app or process is doing the extra consumption.  But it has to be one the standard built in iOS processes.  I can see when what process started.  And when the issue happens, I can hard reset and don't launch anything, and the problem is still there.
    When iPhone apps crash and you connect your phone via iTunes the crash reports are put on your computer.  I found these logs but because the contact and phone app don't crash I have found nothing interesting there. 
    I have not found a way to trigger the problem on purpose.  I tried adding, changing deleting contact on my iPhone, none of these actions trigger the issue.  The problem just appears at random.  
    I have also not found a way NOT to have the issue.  I've tried not changing any contacts for a few days, but the problem still creeps up. 
    I have read dozens of threads on the internet and only this one comes close:
    http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=62b2355d61d8e11 c&hl=en
    I also found this interesting:
    http://discussions.apple.com/thread.jspa?threadID=2567976
    <Edited by Host>

    I solved this problem by restoring my phone to factory setting. I dint find any solution to this problem. Now instead of using "Google Sync" i use iTunes contact sync which does the same thing.
    The key is not to use "Google Sync" when you restore your iPhone. Follow these steps:
    1. Take back up of everything. Sync your contacts so your gmail has latest contacts.
    2. Restore your iPhone. And set it as new iPhone instead of reloading everything from previous backup.
    3. Sync everything using iTunes.
    4. For contacts go to Info -> Sync Contact with -> you can set up gmail here and it will load all gmail contacts to your iPhone.
    My iPhone is working perfectly after this. I hope it works on your too.

  • IPad AIR 2 - SAFARI Loading slow when scrolling pages

    I'm having problems with my iPad AIR 2 with the slow loading web pages with scrolling up and down .
    The problem looks like the video posted on YouTube , the video shot by me.
    Sorry for my English.
    LINK YouTube: https://youtu.be/jYudjQwk7so

    so I went to the Genius Bar today
    the genius ran the usually diagnostic
    she said I had a memory issue
    she tried to blame it on some old backup restore
    but I've never used one
    i always start fresh on a new device manually (other than iCloud contacts and bookmarks)
    well she wouldn't listen and insisted she restore the device yet again
    ((vie already done it 2x in the last week)
    anyways things were fine for an hour
    tthe problem is now back
    i made another appointment for Monday
    know for a fact this issue does not affect every iPad air 2
    there are several in my family
    i am beginning to think its an issue with low performing ram
    ppossibly apple used two suppliers
    i don't want to fail victim to conspiracy theories
    but I am extremely ****** off and I will demand a new iPad on monday

  • ImageIO image renders slow in scroll pane

    Hello all, I need some help understanding the behavior of BufferedImage(s)
    retrieved from ImageIO.read(). The problem I am having is weird .. I load
    a PNG image via ImageIO.read(), I use it to construct an ImageIcon which
    is later used in a JLabel/JScrollPane for rendering. When I attempt
    to scroll the image in the scroll pane, it is very chunky and slow.
    If I load the same image with ImageIcon(byte[]), there is no problem. The
    image on disk is 186k, when loaded from ImageIcon(), it consumes about
    10M, when loaded with ImageIO about 5M is consumed ... when I scroll,
    the memory usage increase about 9 MB, which can be collected immediatly
    to return to 5M.
    Is ImageIO doing some fancy optimization to preserve memory, if so ... how
    can I alter the settings or turn it off completly. I tried setting
    ImageIO.setUseCache(false); that did nothing as far as I can tell.
    The code to load the image is as follows, I am just using the default right now.
          // perform base64 decoding from buffer
          ByteArrayInputStream bos = new ByteArrayInputStream(decoded);
          try
             image = ImageIO.read(bos);
          catch (IOException ioe)
          }Any help would be greatly appreciated!!!
    Cheers,
    Jody

    I'm not sure if this is exactly what you are looking for but, here's code that works well for me:
    private class MyJLabel extends JLabel {
        public void paintComponent(Graphics g) {
          super.paintComponent(g);
          Graphics2D g2d = (Graphics2D)g;
          URL imageLocation = MyJPanel.class.getResource("myImage.jpg");
          Image myImage = Toolkit.getDefaultToolkit().getImage (imageLocation);
          MediaTracker tracker = new MediaTracker (this);
          tracker.addImage(myImage, 0);
          try { tracker.waitForID(0); } catch (InterruptedException exception) { System.out.println("Image myImage.jpg wasn't loaded!"); }
          g2d.drawImage(myImage, 0, 0, getWidth(), getHeight, this);
    }Once I reload images using the above method, image repainting is very quick. Extend the JLabel (MyJLabel) to overwrite the paint method as above. Should work fast when you do so. You can move the image retrieving code out of the paint method and into the 'MyJLabel' constructor.
    How are you painting the icon and where are you retrieving the image? Can you post more code?
    Regards,
    Devyn

  • Grid view slow to scroll

    My preference is to view my albums by grid view.
    However, I'm getting frustrated that when I scroll there is a short wait while it loads up the next lot of album cover art. The bit I don't understand is why it doesn't do this in the background ahead of time in the knowledge that when I'm in grid view I'm very likely to be scrolling and therefore it should load all the album artwork into memory.
    Currently, i tend to force the complete scroll before I search, just so it is all loaded up and then I can smoothly scroll while I'm perusing my music.
    Is there a way I can force this caching? I have boat loads of memory (3GB) most of which is free at anyone time. I also tend to leave iTunes on all the time so it would be better if iTunes could hold all this in memory.
    Any suggestions gratefully received!

    I'm having exactly the same problem. I can't find a hidden preference to cache the thumbnails of album covers, and consequently, in grid view, the overall effect is slow and amateurish.

  • Safari 6 Slow PDF Scroll and Behavior !!!!

    ! Hi !
    I've just upgraded from Lion to ML and noticed something wierd.  If I open a pdf link in Safari 6, and the embedded PDF viewer starts, safari becomes Slow scrolling the PDF and sometimes Stops for 2 pr 3 seconds.
    Is Anyone having the same problem?
    Can someone help me?
    Best Regards,
    Stejimenez

    Just adding my $.02 here as well, Safari Version 6.0 (8536.25) seems buggy, for example, right now none of my keyboard shortcuts work, changing tabs, back, or the mouse gestures like back or scrolling do not work.
    for clairfication I'm on a Macbook Pro 17 OS X 10.8 2.8 GHz Intel Core 2 Duo 8GB 1067 MHz DDR3.
    I use the following key commands in chrome and used to use them in Safari before Mountain Lion upgrade:
    ⌘ ←  to go back (doesn't work in Safari 6.0)
    ⌘⌥← (or ⌘⌥→) to switch tabs (doesn't work in Safari 6.0)
    I use the following gestures in chrome and used to use them in Safari before Mountain Lion upgrade:
    two-finger vertical swipe to scroll (doesn't work in Safari 6.0)
    three-finger horzontal swipe to the left to go back (doesn't work in Safari 6.0)
    Through further testing I think it's site specific, gestures do not work while on stackoverflow or facebook, but do work on w3cschools and wordpress.org -- huh.
    Others out there experience the same issue

  • Dynamic DataGrid + slow horizontal scrolling

    Can anyone explain why my datagrid horizontal scrolling is so
    slow:
    Demo
    www.smithkjaer.dk/flex/TestComp.htm
    Source
    www.smithkjaer.dk/flex/srcview/index.html
    Depending on your connection it can take a few seconds to
    start due to a large number of columns being generated dynamically
    out from the xml source.
    Note: If I disable the datagrids scrolling and scroll it in a
    canvas there is no performance problem when scrolling, except i
    miss my column header labels when vertical scrolling is used.
    If I disable my dataProvider and build the dataGrid without
    adding data it also scrolls fast

    I have now filed this as a bug which has been confirmed,
    which you can read about here :
    http://bugs.adobe.com/jira/browse/SDK-14361
    Please vote for this bug to be fixed

  • Slowing Down Scrolling Thumbnails

    Hello everyone,
    I've put together one of those great masked scrolling
    thumbnail panels by working through a tutorial. I'd like to slow it
    down a bit, could someone suggest how this is done. Here's the
    code:
    panel.onRollOver = panelOver;
    function panelOver() {
    this.onEnterFrame = scrollPanel;
    delete this.onRollOver;
    var b = stroke.getBounds(_root);
    function scrollPanel() {
    if(_xmouse<b.xMin || _xmouse>b.xMax ||
    _ymouse<b.yMin || _ymouse>b.yMax) {
    this.onRollOver = panelOver;
    delete this.onEnterFrame;
    if(panel._y >= 60) {
    panel._y = 60;
    if(panel._y <= -1000) {
    panel._y = -1000;
    var xdist = _ymouse - 250;
    panel._y += Math.round(-xdist / 7);
    Thanks.
    Darren.

    >>panel._y += Math.round(-xdist / 7);
    I'd start here, by dividing by a number greater than 7.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

Maybe you are looking for