Slow upload of Verizon home page along with limited connectivity

For the past few months I have noticed my DSL connection has a limited connectivity issue and after it does connect my home page flashes and takes over 3 to 4 minutes to load this happens every time I use my internet explorer icon to connect. When I use my msn I have no problems. I would like to know if anyone else has had this experience also

Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
news.giganews.com
    traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
    1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
    2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
    3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
    4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
    5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
    6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
#5 Also please tell me what DNS Servers you are using. For example you could use the tool from https://www.grc.com/dns/benchmark.htm
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Display more than one Graph in the same page along with report datails

Hi,
I have to display 3 lines out put along with the 3 GRAPHs below corresponding to the 3 lines in the same page of a the report output. .How do i achieve this? The function modules like GRAPG_2D, GRAPG_3D brings the graph in separate pop up, but I want all the 3 graphs in the same page along with the some text above those graphs (ie my report details in 3 lines).
Could you please let me know how to achieve this?
Waiting fro your kind suggestions,
Regards,
Steve

Hi,
Refer to the following code to display graphs in report.
DATA: BEGIN OF ITAB_DATA OCCURS 0,
DATANAME(15),
QUANTITY1 TYPE I,
QUANTITY2 TYPE I,
QUANTITY3 TYPE I,
END OF ITAB_DATA,
BEGIN OF ITAB_OPTIONS OCCURS 0,
OPTION(20),
END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Electricity'.
ITAB_DATA-QUANTITY1 = 55.
ITAB_DATA-QUANTITY2 = 62.
ITAB_DATA-QUANTITY3 = 59.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Gas'.
ITAB_DATA-QUANTITY1 = 35.
ITAB_DATA-QUANTITY2 = 52.
ITAB_DATA-QUANTITY3 = 44.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Water'.
ITAB_DATA-QUANTITY1 = 18.
ITAB_DATA-QUANTITY2 = 22.
ITAB_DATA-QUANTITY3 = 19.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
COL1 = 'Jan'
COL2 = 'Feb'
COL3 = 'Mar'
TITL = 'Utility Expenses in US$.'
TABLES
DATA = ITAB_DATA
OPTS = ITAB_OPTIONS
EXCEPTIONS
OTHERS = 1.
Hope this helps.
Reward if helpful.
Regards,
Sipra

I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutique,

I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu

It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook?

MSN/Verizon Home Page Reset

My browser has been hijacked to go to the MSN/Verizon home page. How can I get my home page back to the regular home page? I have tried the home page setting under Internet Options -> General, but this does not resolve the hijack. I am comfortable editing the registry if this is what I need to do.

set verizon as my Home Page

No Verizon Home Page

Can't get Verizon Home Page. I can get Verizon webmail. Anybody else in Baltimore County, Md. or some other place having this problem It just happened this afternoon
Holly
I just got this message when I tried getting home page againerver Too Busy
I just spoke to a Verizon rep who said they were gradually phasing out verizon.net, and he said to use verizon.com but when I did it wasn't the Verizon homepage sign in page we have been getting so I typed in the correct log in and made that my homepage Actually it was the sign in home page that said server too busy. I got server too busy when I clicked in IE on my desktop.
Holly
Solved!
Go to Solution.

The rep said they were phasing out verizon.net and to use the verizon.com. If you don't know the full sign in for the IE options from tools, then google to find the Verizon sign in page and put that in the Internet Options as your home page after clicking on Tools. Then you will get the sign in page when you click on IE from your desktop.
We should have been notified of this.
Never mind the rep must have been mistaken as they have fixed it and you can still use verizon.net.

Verizon home Page: Video Player

Wonder why the videos under the video player on the Verizon Home Page are all old stories? They have been there for weeks and never seem to change!!!!!
Holly
Solved!
Go to Solution.

I now know why the video player on the Verizon Home Page had outdated video stories as this morning I see there is a new Verizon Home Page which I like alot. It is mostly white and has less red, which makes it more visually appealing. Also the new Verizon Home Page has many more features and shows the many things available from Verizon.
Do I get a fee for this good advertisement?
Holly

Is there a way to have the Reply To field appear on the Addresses page along with To., CC, and Bcc?

Using Mail with Mavericks, is there a way to have the Reply To field appear on the Addresses page along with the To, CC and BCC fields?

Click the little popup menu button next to from and select it:

Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

Hello,
I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
SO PLEAZZZZZ HELP!!!!!

An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

I have yahoo music player on home page worked with firefox 3, chrome, ix, doesn't with firefox 4 why not

yahoo is home page. yahoo music worked with firefox till I upgraded to firefox 4. Works with ie and just tried chrome. Screen comes up, video doesn't play, just grey in video screen. Norton security isn't blocking. Would rather use firefox, If firefox 4 won't work, how do I install previous version. Thanks Vernon.

Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
If it fails regardless, you can try changing the user agent like this:
#In the location bar at the top, type: '''about:config''' and hit Enter.
#In the filter at the top, copy/paste the following: '''general.useragent.override'''. This will display a blank page.
#Right click anywhere in the blank area and choose "New" and then "String". In the dialog box which appears, copy/paste '''general.useragent.override''' again and click OK. The dialog box will remain on screen, but you'll see that name appear above where it previously said "Enter Preference Name".
#Next, copy/paste the following: '''Mozilla/5.0 (Windows NT 5.1; rv:2.0) Gecko/20100101 Firefox/4.0'''
#Click OK and then go to File | Exit. Restart Firefox again and see if it works.
#I've uploaded a screenshot for you to illustrate the steps above.
Hopefully, your uni's webmaster will update their site to work with Firefox 4.0 soon.

My iCloud drive is slow to save and share Pages documents with my IOS devices

My iCloud drive is slow to update and share my Pages documents with IOS devices. When I save a document to the iCloud drive I get a Cloud symbol in the Name line (behind the document name) and a bar in the Size column (like it's trying to save the document but is unable to do so). When I see the document in the document list on the Pages app on my IOS device it has a gray line along the bottom and I can't open the document in the Pages app.

Same for me, too - for the last few days. Reminiscent of a few weeks back when iTunes and Apple TV ground to a crawl. Of course Apple system status is green. After several days it just started working again. At least with Mac iCloud I have tried to use multiple networks/carriers so now there's no blaming AT&T on this one.
Called support and got the extended wait time message. Gave up.
Love my devices and software, but Apple really has poor cloud support. They won't even own up to the issues. If my employer didn't block dropbox, absolutely done deal I'd be off iCloud back with Dropbox.

Firefox opens a dialog box when I use the browser, "Checking add-ons for compatibility..." then open the Firefox start page along with my homepage. I do not want the Firefox page when I open the browser. how do I stop this?

Since Firefox updated it checks add-ons every time I open Firefox. The Firefox homepage then opens along with my home page, two tabs. I want the checking to stop. This has not happened before--only with this update.

This question was reposted and replied to here: <br>
https://support.mozilla.com/en-US/questions/878953
... so I'll lock this thread.

Home page opening with Login page

Hi,
Today we are facing a peculiar case, when we login to Unifier application. On successful login, the home is displayed with login page again. Please let me know hw to resolve this.
Regards,
Deepak

Try ditching Dreamweaver and switching to Notepad ++, less bugs, less control from big brother, more nimble, less crashes ... simply better than this pile of junk.
Ok - put your style sheet in a separate file and link it.
If you're going to use styles then don't use attributes if you can get away with it. (Have a look at CSS Zen garden - such a great site. May be a little complicated for a beginner, but it gives you something to aim for.)
Ditch the table format - it makes everything far, far more complicated; try using DIVs instead.
NEVER nest tables if you can at all avoid it. Usually you can - it's just a case of looking at column and row spans.
NEVER use something like DreamWeaver in design mode - it's a huge waste of time.
Try starting with something more basic and build it up a step at a time. Test every change stage by stage - if you're painting a picture you never paint the whole thing then take a step back and look, you always paint a piece, step back and look, paint another piece etc...
Most importantly - research which setting (relating to tags, CSS and attributes) actually performs what operation, and which affects which browser. The classic example of this is the Internet Explorer 6.0 box model problem.
But most importantly, ditch DreamWeaver. Hell! VI is better!

Firefox home page opens with jzip and will not open as google, yahoo, unless manually entered - plus window appears asking to set yahoo as default but doesn't work. t

I have tried all the home page set-up options without success. I have deleted Firefox and reloaded with no change. The Firefox program will open with no other home page but jzip.com

Hi,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How does photo metadata get uploaded to shared Photo Stream along with the photos?

Performed upgrade to Mountain Lion so I could share Photo Streams with other people,. Trouble is all the naming, descriptions, locations of the photos do not show up in Photo Stream. Is there a way to enable this or is it just not possible?
I am migrating from sharing Picasa Web Albums to Photo Stream and would like to have all the metadata along with the photos...
I was not sure where to post this question as it is related to iCloud, iPhoto, OS X Mountain Lion, etc. The shared Photo Stream feature appeared in my version of iPhoto '11 (version 9.4.2) only after the upgrade to Mountain Lion.

Photo Stream only uses the file names and what you're changing is the Title, not file name. To get the title to be the file hame you have to export the photo out of iPhoto via the File ➙ Export ➙ File Export menu with the option to use the title as the new file name.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
OT

SSL home page issue with personal /Sites folders

I need to have the Server home page connect via SSL, so I put a 301 on /. Now the /~sites don't work. What's the correct way to fix this? I want the SSL on the default server page. Seems to me an SSL redirect would be a double redirect? Thanks for your time - it's much appreciated.

try just - http://host1.example.com:4848

Slow upload of Verizon home page along with limited connectivity

Similar Messages

Maybe you are looking for