Slow USB Device Detection on Pavilion dv2-1010AU

Hi,
I brought HP Pavilion dv2-1010AU last year and until now there is one issue that bothers me.
My laptop slowly detects my device everytime I plugged in my USB Drive (Kingston Data Traveller 120 16Gb) and my USB HSDPA Modem (Bandluxe C170). It detects them about 2 minutes after I plugged them in. Right now, I've upgrade my OS to Windows 7 Ultimate 32-bit, and the problem still occurs.
Is there any sollutions for this? Thanks in advance for the reply.

Did the laptop function OK before the infection or did it ever function correctly ?
 Go to control panel and choose Icon view and look for "Recovery" open that and look for "system restore" Pick a restore point when the laptop was functioning normally. This procedure will not harm your personal files.
 The other thing that will work is to perform a system restore. This will put it back to factory specs. but you will have to save all of your personal items as the system restore will wipe this all out.
On boot up start tapping the f11 key and that should get you into the recovery process. There are other ways, but this is the easiest.
 Even though the virus has been removed it does damage to the registry that needs to be repaired. In some cases this is true. Yours looks like this may be the case.
 Some one else may jump in here with some other suggestions that may be helpful as well.

Similar Messages

  • "New USB device detected" - large black window comes up & at the bottom it says "hold alt to remember the choice". How do I reset?

    "New USB device detected" - large black window comes up when I plug an external HD or NetTalk device. At the bottom it says "hold alt to remember the choice". Im running Parallels 6.0, so give me the option to choose. I held alt and chose Mac. Now I want to choose Windows 7 - BootCamp, but Can't. How do I reset my choice, so it always asks me?
    Thanks for your help!

    You may get faster answers by also asking the Boot Camp forums area here:
    Boot Camp

  • SetPanelAt​tribute crashes USB device detection

    I am developing an application for LabWindows 2010 that reads and writes to/from a hardware board via a USB connection.  The program initializes the interface on startup by calling InstallWinMsgCallback to detect any WM_DEVICECHANGE messages sent to the main panel.  The callback receives the WM_DEVICECHANGE message and detects whether power has been turned on or off to the board by looking for wParam == DBT_DEVICEARRIVAL (power on) or DBT_DEVICEREMOVECOMPLETE (power off).  The device information in lParam is used to configure the board.  The callback also receives WM_DEVICECHANGE messages with wParam == DBT_DEVNODES_CHANGED but ignores these.
    Our application can be controlled either by the user or from an "automation" server program.  When automation is turned on, the application disables input to the main panel.
    The problem I'm seeing is that when certain attributes of the main panel are set to false (including ATTR_MOVABLE and ATTR_CLOSE_ITEM_VISIBLE), the USB interface crashes.  The crash is indicated by a different message being posted to the callback with a message ID of 1004 (hex 3EC), even though InstallWinMsgCallback was never called with this message ID.  Once the crash happens, the program no longer detects when power to the board is turned on or off.  The callback will still receive DBT_DEVNODES_CHANGED messages when the board is powered on or off, but not DBT_DEVICEARRIVAL or DBT_DEVICEREMOVECOMPLETE.
    I have looked for information on the meaning of the 1004 error code on various websites that list WM_xxx message opcodes, but this code isn't listed.  I've also noticed that after the crash, the program will still continue to process all messages for other USB devices -- for example, if I plug a portable USB drive into a port on the PC.  Only the detection of the hardware board is affected.
    Does anyone have an idea what could be causing this?
    Rich Ferrara
    Solved!
    Go to Solution.

    Jared,
    Our program interfaces with two different boards.  Both are made in-house.  The vendor ID code is 0x04B4 and the product ID codes are 0x1004 and 0x57E1.  (I'm guessing the "1004" value is a coincidence, since the vendor ID is hex and the 1004 I saw in the Windows message number is decimal.)  The USB connections are the standard type A on the PC and type B on the boards.
    I tried switching the boards to connect to different ports on the PC with the same results.
    When I added a SetPanelAttribute call to the program initialization to set the main panel to be non-movable and non-closeable before calling InstallWinMsgCallback (or when I changed the default panel settings in the UIR file), the USB interface didn't crash when I turned automation on -- but it did crash when I then turned it back off.  So it appears that it's not the fact that the attributes are set to false that's causing the crash; it's the act of changing them.
    I found that changing the ATTR_SIZABLE attribute has the same effect, and there may be more.  But there are other panel attributes that don't cause any problems (including ATTR_DIMMED, ATTR_VISIBLE, and ATTR_TITLE).
    The first time I got the 1004 message in the callback, wParam was set to 0x00040322.  After that, I got another 1004 message every time I changed the automation setting.  Each time, the upper 16 bits of wParam incremented by 1 while the lower 16 bits remained 0x0322.  Since I can't find any information about the message, I don't know what those bits mean.
    Rich 

  • New wdtv, 1.02.17, cannot detect usb-device

    Have had wdtv for years. Small to no problems. Use only external harddrive, no streaming at all. Bought a new wdtv for daughter the other day. First thing noticed is new GUI (the old one was better). But ok. The other thing is that the wd my book or the wd my passport is not detected. Waited for several minutes, in case the new wdtv was slow. Nothing happened. Tried the old one (same chassis but onother gui), 1.12.14. Both usb-devices detected at once.  Is it something I am missing? I have used wdtv for years, since 1. generation, only for usb-connection. Have had almost no problems (use apple-tv for streaming  Thanks

    tinuadmin wrote:
    The other thing is that the wd my book or the wd my passport is not detectedso, are you saying the hard drives led lights don't even come on when you plug the drive in ? a bit strange ... my wdtv (1.02.17) sees all my wd hdd's (My Book, Elements and Passport) all are NTFS things you can try ... do a factory reset (yes, even if it's brand new out-of-the-box)Setup > System > Device Reset > Reset All Settings Back to Factory Default content source button ?  press the red button on the remote and select "Local Storage"  if none of that works ... keep your purchase receipt handy in case you bought a dud

  • USB devices and Webcam not working or installing on Pavilion Laptop

    Hi there,
    I have a HP Pavilion Dm3 1030 sa,
    For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
    This was annoying but I put up with it.
    Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
    I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
    Pn vj409ea#ABU
    Is my notebook in the warranty period? No (three months out)
    Is the originally installed OS still installed (Yes)
    Have I changed the partitions (NO)
    Thanks for any help
    Kieran Latham

    run an extended _*Apple Hardware Test*_.
    JGG

  • How to detect USB device drives

    Hi
    I want to write a program which will detect the drive letter when a usb device is plugged in. i.e., if a usb device is plugged in and the drive letter is "F:", then my program will instantly detect the presense of the device as well as get the drive letter. How's that possible in Java?
    Thanx in advance
    Regards
    Mathew

    cotton.m wrote:
    Well if you're looking for the newUSBDriveListener API you're out of luck.
    There is no way to do what you are looking for in a number of ways.
    1) If something is listed as a drive the best you can now (from FileSystemView) is that it's a drive.
    2) There isn't "new drive/or device added" event API.
    So what you would have to do is when your program starts get the list of roots. Then poll at some intervals to get the list of roots and see if there are changes. If new drives show up then they show up.I agree!!!

  • USB Devices not being detected

    I have a couple of problems i've been struggling with for a while, searching the forums to no avail.
    1)
    Firefox's UI font sucks.
    Here it is compared to Thunar:
    EDIT: Fixed. I had anti aliasing Disabled in .font.conf
    2)
    USB devices aren't autodetected after I start X.
    i.e. if i plug my mouse before logging in (shell) and starting x, it works, but if i wait till later, it doesn't.
    I don't think usb drives are being detected either, but I can't figure out how to try to mount them either. I would like to have automounting of usb drives and autodetection of usb peripherals.
    Thanks
    Last edited by underpenguin (2008-02-06 02:14:04)

    I know you said you searched the wiki and forums, but have you seen this?
    http://wiki.archlinux.org/index.php/Firefox#Fonts

  • USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

    I am running Arch as a host and XP on VMWare workstation 7.  My primary purpose of installing XP on VMWare was to use my edit my Line6  POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
    I have the usb controller installed.
    Any suggestions?
    Last edited by devadittya (2009-11-24 20:04:45)

    I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

  • USB Device Failed Detection

    Hello,
    I am trying to connect a USB to SATA/IDE Adapter to a USB port on Solaris 8. In the /var/adm/messages file, two messages show the following:
    usba: /pci@1f,0/pci@1,1/usb@c,3 (ohci0): getting device status failed (-1)
    usba: /pci@1f,0/pci@1,1/usb@c,3 (ohci0): connecting device on port 1 failed
    It appears that the USB device is being detected but the OS doesn't know how to define it. Maybe a device driver might be needed?
    Thx

    Hello,
    I am trying to connect a USB to SATA/IDE Adapter to a
    USB port on Solaris 8. IIRC Solaris 8 only supports USB Keyboard and mouse. You'll probably need to get a newer version of Solaris.
    alan

  • Detecting USB Device insertion/​removal

    Hi All,
    With reference the an earlier post by softengr (here), I'm trying to detect the USB devices while being connected.
    I'm trying to compile the same code posted by softengr, but getting some compilation error even after adding windows.h.
    I think I'm missing some header file here.
    The following are the errors during compilation;
      Undeclared identifier 'DEV_BROADCAST_DEVICEINTERFACE'.
      Undeclared identifier 'NotificationFilter'.
      Undeclared identifier 'GUID_DEVINTERFACE_USB_DEVICE'.
      Undeclared identifier 'GUID_CLASS_USB_DEVICE'.
    I'm using LabWindows/CVI 2012 with Windows7 64bit.
    Can anybody suggest waht am i doing wrong here.
    Thankyou,
    Dosth

    A search of the NI forums for "USB Event notification" returned an entry that may help you:
    Windows device event notification
    Message Edited by Phillip Brooks on 12-01-2008 06:49 AM
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • Audigy NX / Win XP not detected as USB Device! Can't Inst

    My NX which is under a month old all of a sudden is not being detected by Windows XP anymore. I plugged it in today (it was working fine a few days ago) and it was giving washed out music when playing a CD - like everything was muffled and the bass was dominating. I unplugged it, replugged it in but Windows detected the USB device as "Audigy NX" and tried to reinstall the hardware, but failed, and that was the end of it - It did not appear under my device manager profiles, nor could I get it to work anymore with my laptop. I removed all the Audigy NX software, unplugged everything, went into safe mode and uninstalled the drivers, reinstalled the drivers... what it comes down to is that Windows won't even detect the hardware when I pull the cable out and plug it in again. What do I do when all the drivers & problem solutions are dependant on Windows seeing my USB device. (I even uninstalled the USB roots on my computer and redetected them.. it only found my USB mouse, but no the Audigy NX.) I haven't made any hardware or software changes since I last used it - I have been operating Windows XP Home edition, SP2 with no problems with the NX up until now. Perhaps its a Windows thing, but maybe you can offer some help.
    Thanks,
    Echostorm

    Echostorm
    Try doing a Cleansweep for the sound card. This information can be found at the Knowledgebase.
    http://us.creative.com/support/kb/ar...asp?l=2&sid=72
    Jason

  • USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

    Since a few days now I get the message
    'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
    It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
    Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
    I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
    Anyone has any idea?
    Thanks
    HP Pavilion dv7 Notebook PC
    LE902EA#UUG
    Windows 7 64 bit
    This question was solved.
    View Solution.

    The solution can be found here

  • How do I know if I have a bad USB device, or if it's not being detected?

    I am using my iMac for a point of sale system, and I have attached an ID Tech minimag magnetic card swipe reader.  The LED light is on, however the computer doesn't show it under the USB Device Tree, and I have tried using different USB ports.
      Is it likely a bad device, or is it that my iMac doesn't detect it?
       I saw another discussion question that mentioned it may be detected but classified as a keyboard, however there is only one device listed under the Keyboard Hub in the USB device tree.
       Any suggestions?
        Thanks,

    I guess one thing I'm not clear on is whether this thing is even intended to work on a Mac.
    You may also find assistance on:
    http://www.idtechproducts.com/support/daq/minimag-a-easymag-readers-faq-.html
    which, for example, has a FAQ on how to tell if your reader is working.

  • Program to automatically detect usb device

    Dear labview users,
                                       I wanna build a program such that when a USB device (pen drive/ memory stick) is connected to a PC, it has to detect the device and prompt the user to provide a password and then only the user gets the accessbility to open the memory stick.  This is mainly for security purpose of the PC, such that in no condition without the programmer's knowledge no one should transport the data from the PC.
                                       To add more to the program, this labview program should be run in the background in all the time in the sense that even the labview program is triggered by the user or not, it has to run all the time in background without anybody's intervention. when a memory stick is connected it has to prompt the password.
                                        Is this possible in labview, Iam using labview 8.0. If anybody gets solution to this young chap's idea please response to this query.
    Labview lovers.....

    Hi Shivkumar,
    Would it be acceptable for the entire PC to be in a way "locked down" untill a password is entered once a pen drive is detected? Or would you simply want the password dialog to pop-up when they try to double click on the actual drive under "My Computer" to access the data? Also, if the password is not entered but the pen drive is remove, should the password dialog box disappear?
    Best regards,
    Steven

  • My X230 won't detect any USB devices..

    hello all,
    I'm from Indonesia, a few days ago I bought lenovo X230 5FA.. but every I pluged in every USB devices, it won't detect on my x230..
    the devices is:
    1. Sandisk Cruser Swicth 16GB.
    2. USB Modem Huawei E169.
    note that I use the latest driver provided by the web support device..
    can anyone help to fix it?
    thanks and sorry if my english not good :-P

    What operating system are you running on your E330 and X230?
    The answer may be found by figuring out why it works on the E330...
    Have you tried to use any other devices in the USB ports besides those 2?
    And were the recognized?
    Did these devices ever work with your X230?
    You could try to roll back to a previous driver update and see if that helps?
    Here are some resources that might help you:
    ThinkVantage Technologies Download
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432
    Diagnostic Software
    http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS
    Tool Box:
    http://www.lenovoservicetraining.com/ion/Lenovo_System_Toolbox/pdf/Lenovo%20System%20Toolbox.pdf
    Be AWESOME Everyday!
    Donate KUDOS and Click "Accepted Solution"
    Did someone help you today?
    Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Maybe you are looking for