Slow video update with iSight on Boot Camp Windows XP SP3

I have the latest White Macbook with the NVidia Chipset. I have installed Windows XP SP3 via Boot Camp and all has gone fairly well. Only issue is iSight... It shows up in Devices as iSight and will open and initialise. However, the video preview is VERY slow. The picture updates every 10 seconds or so! It can take a still picture but any attempt to use as a video device (under Windows Movie Maker) causes a crash. Have used iSight under Boot Camp before, on earlier MacBooks with no such problem. It works fine under OSX. Any ideas? Many thanks.

Still no thoughts? If it helps, I've found out that if I use Windows Movie Maker and lower the resolution to the lowest available, iSight works fine. A clear preview is available and it will record video from the iSight. However, the original problems are still present when selecting the iSight icon from, "My Computer" or trying to use Windows Messenger. Anyone any ideas?

Similar Messages

MacBook Pro Boot Camp Windows XP-SP3 Win only restarts boot to black screen

i have a new install of 10.6.1 w/boot camp running an sp3 updated xp version. I have completed the same install on a more new MacBook Pro 15" with no issue, however my mbp 2.33Ghz aluminium has restart problems but ONLY when doing a "restart" from the running xp os. again only when i am running from xp alone, and only when doing a restart (which is all the **** time for xp) does my mbp 1st do a normal apple chime and then hang to a black screen.
once i power down, hit the power button and restart, do i get a normal blue/grey screen, apple chime and the option to boot to macos or my windows partition. the same restart when running macos brings the grey/blue screen up right away.
seems to me there must be something off about doing a restart from windows.
has anyone seen this? any recommendations for diagnostics or a solution would be most appreciated!

never mind, i blitzed the xp drive and reinstalled. 3rd times a charm

Boot camp Windows xp SP2 wireless is extremly slow

boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
It's MacBook 13, just bought it last week. All drivers are updated.
Any suggestion?
Thanks

I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
tmt345

How do I update my version of Boot Camp (4 to 5)

I have got an MacBook Pro (15') with OS X Lion and the version of Boot Camp that has been delivered with the Computer (Boot Camp 4.0) How can I update it to 5? Because I want to install Windows 7 / 64 bits and it requires Boot Camp 5.
greets, sarah

http://support.apple.com/kb/DL1638

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

Does Apple USB modem (or any USB modem) work with Telix under Boot Camp?

I know, it's one heck of an obscure and specific question. But it just so happens to be critical to whether I try and use an Intel Mac (new, with Leopard, under Boot Camp) as a PC (where a PC would be a lot easier as far as having a built-in 56k modem goes). By Telix I mean the most "recent" version of Telix for Windows. Thanks in advance for the assistance.

It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
[ Edited by Apple Discussions Moderator ]

Can I upgrade to Mountain Lion with Boot Camp windows 7?

Can I upgrade my mac book pro to Mountain Lion when I have Boot Camp Windows 7?

Welcome to the Apple Support Communities
You can upgrade to Mountain Lion without any problem, but I recommend you to make a backup before upgrading. Also, after upgrading OS X, I recommend you to download the most recent Boot Camp drivers on Boot Camp Assistant and install the drivers on Windows

No Audio Boot Camp Windows 8

Hello Everyone,
I've Installed Windows 8 using Bootcamp, and installed all the drivers on the boot camp folder, but I have no sound.
I wiped the partition, reinstalled and still no sound.
I have also gone on the realtek website, downloaded drivers, still no sound.
Under Device Manager, there is a yellow warning for the Realtek Driver and the High Definition Audio Driver.
It says"The device cannot start.(code 10)
The request is not supported"
I have been trying to fix this for three days now. In that time I have uninstalled, reinstalled, updated dozens of times, and been googling all that time for solutions. I am about to pull the plug
Please Help.

Found one solution that works after working through a bunch that didn't.
The audio drivers that come with the latest boot camp don't work to produce sound even though Windows is reporting that the device High Definition Audio is working.
The task is to update the device driver using the driver from Cirrus Logic which can be found at
http://www.stuffedcow.net/macbook_audio. Select "WinVista" version on this page or use this link to download the zip that contains the drivers at http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip.
First unzip the drivers to a file folder of your choice that you will need to remember as you will need to point to it later, e.g. c:\users\yourname\Cirrus_Logic
Next find the audio device in device manager. Can use Search Settings "device", select "update device drivers" or "device manager" and find "Sound, Video, and Game Controllers". Under this item, you should see a High Definition Audio device that is working properly., Right Click on it and select "Update Driver Software", then "Browse My Computer for driver software", then navigate to or paste the folder path into the location window. Click Next, and it will start looking for drivers in that folder/path.
It should find the drivers and complete the installation and when it is done your sound device should now be named "Cirrus Logic". Be patient at this step, it can take a few minutes.
Must reboot computer at this point and then sound through speakers or audio jack should be working!
Good Luck,
Darryl

Boot Camp Windows 7 No Longer Connects to Internet

Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation. It has run flawlessly for more than a year. Recently however, I have been untable to connect to internet when running Windows. The connection works fine as a Mac. While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable. Then the "no internet." I have all the latest Boot Camp support software installed. All MAC and Windows software updates are installed. My network devices are configured correctly. I have rolled back to previous Windows updates with no resolution. Does anyone have any suggestions?

your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
What else is on the LAN?
I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
Besides Apple and Windows, some drivers are or often still needed - manually.

How do you switch iMac 27" display when in Boot Camp (Windows 7)?

Hello,
My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2.
When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
Thanks!

I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

Hi,
I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
dmk.sys
HdAudio.sys
ksthunk.sys
portcls.sys
SysFxUI.dll
WMALFXGFXDSP.dll
Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

Very strange hard disk problem - Boot Camp/Windows related?

On my first gen 1.83 GHz MacBook Pro (now at 10.5.2 with all System Updates applied), I've had Win XP Home installed under Boot Camp (from the very first beta, updated to the release Boot Camp assistant now) for well over a year. At one time about 14 months ago I tried using Parallels, but that used too much battery power, so I deleted Parallels. I don't know whether that left any traces of itself behind.
More recently I've been amazed at how well VMWare Fusion works on my Mac Pro, so I decided to try it on my laptop. I installed the Fusion application and tried to "adopt" my Boot Camp partition installation of Win XP. I think I goofed and didn't install VMWare tools at the proper moment, because Windows went on a self-directed hunt for drivers after installation, and when I tried to start the virtual machine inside Fusion, Windows told me it needed to be activated by Microsoft and wouldn't even allow me to log in to do the activation.
Wondering whether there might be some residual of the Parallels "hooks" to Windows contaminating things, I decided just to reinstall Windows.
I used Boot Camp Assistant to remove the Windows partition. The first clue that something was now amiss was that I decided to reboot the laptop after reclaiming the Windows partition, and when I did so I encountered a black screen with a decidedly "microsoft pre-start up" text message on my screen, something like "press any key to start up from the removable media drive", then "press any key to start up", neither of which would work (even with a bootable disk in the optical drive).
So, I rebooted holding down the option key and was able to start up Mac OS X 10.5.2. Only one volume was shown now in "About this Mac" and on my desktop, so I ran Boot Camp Assistant again to re-create a Boot Camp partition. UNFORTUNATELY, in the midst of this, I encountered my first ever kernal panic ("windowshade" effect descending down the screen and multiple-language dialog telling me I needed to reboot).
I rebooted and ran Disk Utility, which told me my partition map was wrong and that I was missing about the amount of disk space I'd allocated to Windows in my previous Boot Camp partition. I thought at THAT point I'd solved my problem - I could just run disk utility from my Leopard startup disk. HOWEVER, the Leopard installation disk will no longer reboot the laptop!
I confirmed that the problem is not the Leopard installation DVD, because it will boot my Mac Pro and it mounts on the desktop and Disk Utility says it's fine.
So, I tried to repair my laptop's drive using DiskWarrior 4. That worked (at least it made a new directory, and after it did so, when I boot into the Mac OS, Disk Utility run from the hard drive also says the disk is fine). HOWEVER, the Leopard DVD still won't boot the MacBook Pro. I made one more attempt to create a Windows partition using Boot Camp assistant, and once again generated a kernal panic in the midst of partitioning.
It seems that I've done something to the stuff on the hard drive that's needed at boot time or partitioning time. I can't erase and reformat the drive, because the Leopard install DVD won't start up the machine. Even though DiskWarrior creates a directory that Disk Utility says is fine, I cannot recreate a Windows partition.
Any advice what I can or should do next? I can try using the System Install DVD that came with the laptop, or perhaps the system restore DVD, but my bet is they won't start the machine either.
Please feel free to ask any questions, send me to any other resources, or contact me via email if you have ideas. I have a 10 day business trip beginning Sunday March 30, and I desperately need a working laptop by then.
Thanks so much.

"Responding" to my own post: the Install DVD that came with my MacBook Pro will boot it!
So, I'll try running the earlier version of Disk Utility that came on IT (10.5.4, current Leopard version is 11.0) to repair the MacBook Pro's internal hard drive, THEN see if I can boot from the Leopard install disk (the notion being that I can (groan) recreate a virgin Leopard environment on the laptop with no traces of prior disk formatting nightmares.
(a few minutes later): the Leopard Installer DVD will now boot the MacBook Pro. As one last attempt to avoid the whole reinstall nightmare, I'll try running Disk Utility from the Leopard Install DVD, and if it passes, make one more attempt to create a boot camp partition on my hard drive. If that doesn't work, next step is to wipe the internal drive and do a clean install of Leopard and all my other necessary stuff.
Any other ideas?

Boot Camp / Windows Partion... Can it be installed on a separate hard drive

I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
Thanks for you feedback.
Mike

Hi Mike,
since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
Reasonable size depends on what you want to do with it.
Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
Add to that the HD space you need for the programs and data you use/produce.
And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
Windows XP at least 30GB, Vista at least 50GB.
Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
Regards
Stefan

Is Paragon's "HFS+ for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too. I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac. Is it safe?
Thanks.

Thanks, Templeton. Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great. But once I leave the OS X / Parallels environment the folder sharing access disappears. So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives. (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
Thanks GeekBoy. Paragon HFS sounds risky with Parallels. I'll be eager for more feedback about risks of using that combo from whomever can offer it.

Boot camp, windows xp and macbook pro-install problem

MacBook Pro 1,1
Mac OS X 10.6.8
Boot Camp Windows XP
I installed a SSD and want to put Windows XP back on the computer.
I had Windows XP running under Boot Camp on my old HDD.
During the Windows XP install when it tells you to
press ENTER to install Windows XP
press R to repair a Windows install
press F3 to exit
I can't get the install to accept any input from the keyboard.
I tried searching the discussions but I'm not finding the answer.
I'm sure it is just something simple I'm not doing. I had Windows XP
running on this MacBook Pro before.
Thanks

I wonder if your XP works with SSD or some SSDs have had trouble with Windows on Macs...
I'd search out PC forums + brand SSD for starters users with XP.
Everyone I run across though have moved on to Windows 7 64-bit.

Slow video update with iSight on Boot Camp Windows XP SP3

Similar Messages

Maybe you are looking for