Slow video without Aero style

Hi,
I have z565 Lenovo notebook with Win7 Home Basic preinstalled. No drivers I didn't install by itself.
When I switch display to classic or simplified Win7 display style the rate of drawing of window's frames is more slow then under Aero style. When I move window through the screen (by mouse) I see the train of maltiple frames behind  the window. Under Aero style I didn't see any visual features of slow drawing.
Does the solution exist to eliminate this defect? Does it common problem or my specific case?
Thanks.

JuseBox wrote:My video is is fine here and im using nvidia drivers w/ openbox.  only issue is fullscreen flash.. but we all have that issue.
thnkz.
can add that the video starts good, but only 3segs, after that only sounds and the video freeze.
mpeg-4 is the problem ¬¬

Similar Messages

  • Mac pro System Slows down without external Battery

    All my app ,videos run very slow(Videos are most vulnerable) without external battery .However my battery charge shows 100 % ,mac pro 13inch Early 2011
    can you please advise what could be the problem

    Dose this issue happen when the computer is plugged in? or only when it's unplugged from power?
    Have you checked for software updates? if so, have you installed all the updates? (apple menu, software update, install updates, reboot, repeate untill there are no more updates)
    If the issue is happening while power is plugged in, have you tried a SMC Reset and NVRAM Reset?
    Is there any thing externaly connected to the computer besides power? if so, haveyou tried removing those items; to see if the issue only happens while those devices are connected?
    Do you know if yoru MacBook Pro has a NVIDIA GeForce 8600M GT? (apple menu, about this mac)
    Do you have any kind of keyboard cover? if so, have you tried removing the keyboard cover, dose the issue still happen?
    You could also try running an Apple Hardware Test. If it give you any error codes; I would suggest writing down the exact error message it displays.
    Also it might be a good idea to set the graphic card to run on the high end card; and see if the issue still happens. (apple menu, system prefrences, energy saver, At the top there should be a check box along the lines of use best graphic performance at all time, check this box)

  • Slow video playback in Photoshop Elements 11

    Playback of videos directly in Photoshop Elements Organizer is very slow. Video is stuttering.
    Playing the same video outside of PSE11 with Windows Media Player is much better. Video plays without any stuttering.
    Looks like the internal video player of PSE11 is very poor and provides slow performance.
    What can I do do have the same video performance with the PSE11 player as I have with WMP.
    I use Windows 7 64 Bit (8 GB RAM) with a Intel Core i3 (2330). This CPU has enough power to playback HD or Full-HD videos without any stuttering!!!
    Why can't the internal play of PSE11 Organizer play my videos without stuttering - like WMP 12.0.7601.18150 does?
    Regards,
    Dodson65

    The videos I use are created with different devices.
    I have HD videos taken with a Pentax DSLR and I have Full-HD videos taken with a Windows Phone 8 device.
    Both playback on my Laptop without any stottering with different software. I checked WMP and VLC. Even when using my Laptop with energy-saving profile these videos can be played without stottering.
    When I playback the videos in PSE11 Organizer I don't want to edit them - just playback. So why should the internal player behave different? I agree with you - this might be different when I playback the videos in Premiere Elements 11 (as this is a video editing software). But when using Photoshop Elements 11 I want to be able to playback videos in the same performance as I can do with WMP or VLC. If Photoshop Elements 11 can't do that - why? The organizer of PSE11 is not an editor. It should be able to playback videos the same way (with the same performance) as other players on my laptop.
    Can you please explain this sentence: "Have you started a Premiere Elements project yet that uses this video's specs? This will often trigger Premiere Elements to download the necessary components for interpretting the video." Is there anything I can do to improve video playback performance?

  • How do I watch videos without them stopping all the time?

    How do I watch videos without them stopping all the time?
    I have Snow Leopard on two computers and IOS5 on IPad 2. Videos will not run without stopping. I am talking about videos like on Yahoo and YouTube etc.

    Slow Internet download speeds are typically responsbile, if you have 5 Mb/s or slower it's really bad. 10 Mb/s or higher is preferred and 20 Mb/s or better is ideal.
    If you use a alternate DNS service like GoolgeDND or OpenDNS which has to fetch Akami hosted content from overseas instead of using your much closer ISP servers.
    If your router is the old G model, upgrade to N.
    If your wifi is open, you could have leechers. The more on the network, even a fast one, the slower it gets.
    Secure your network info here etc.,
    https://discussions.apple.com/message/16276201#16276201

  • How can I record video without sound?

    I would like to record videos without audio on my iphone? Is their a way to record videos without sound in the default camera app? If not than does any one know of any apps that can?

    Do you happen to have your phone set for mute?  Apparently (with the Note 3) this would also mute recording of sound in videos.  Using normal recording mode?    Slow mo and other modes may not record sound either.

  • Slow video :'(

    3 days ago my system can play videos without problems, but now HD video are really slow:
    - kde4.3.2, but now 4.3.4
    - xorg-server-7.2.2, but now using xorg-server-7.2.1
    - xf86-video-intel, but before xf86-video-intel-git
    so basically, 3 days ago my system works fine, can play any kind of video without problems, but now HQ(720p) videos are really slow, even in youtube.
    im the only one?

    JuseBox wrote:My video is is fine here and im using nvidia drivers w/ openbox.  only issue is fullscreen flash.. but we all have that issue.
    thnkz.
    can add that the video starts good, but only 3segs, after that only sounds and the video freeze.
    mpeg-4 is the problem ¬¬

  • Error message: "Attempt to capture video without a video device selected."

    When trying to log and capture, I'm receiving the following error message: "Attempt to capture video without a video device selected. Please select a video device in your capture presents and try again."
    In Capture Presents under DV NTSC 48 kHz it says "WARNING: Video Device DV Video is missing."
    An attempt to edit the Capture Preset gives me QuickTime Video Setting Digitzer options of only "[missing] DV Video."
    This happened only after I upgraded to Tiger. I know Log and Capture is recognizing the camera because it's showing the timecodes, but not the image. Any help would be most appreciated.

    This reminds me of a problem with the QuickTime install. Try this - remove all the QuickTime associated .pkg files from /Library/Receipts, then go to http://www.quicktime.com and download the full installer and do a complete install.
    Post back,
    Patrick

  • How can i transfer videos without losing the sound to my iPhone 3G?

    Hi
    I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
    Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
    How can i transfer videos without losing the sound to my iPhone 3G?

    One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
    http://www.apple.com/iphone/specs.html
    What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
    There's software out there that might make this easier for you but I can't recommend anything specifically.

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • How can i play youtube videos without quitting my app in iOS 5?

    i'm loading an embed code of a youtube video on a UIWebView and it has being working just fine , but now i'm testing the app on iOS 5 and when i'm in fullscreen mode and i press the pause button the app just frezze .  can anyone help me with this?
    This is the code i'm using for loading the video:
    http://iphonedevelopertips.com/video/display-youtube-videos-without-exiting-your -application.html#comment-55254
    NOTE: I'm using iOS 5.

    NOTE:  Please use the confidential forums created for this purpose - iOS 5 beta

  • How to add an image to an imovie 9.0.4 video without stopping the video or audio

    I am creating a video in iMovie 9.0.4 and I would like to add images to my video without interrupting the audio.  I read online about a Cutaway option but when I followed the directions I was not given an cutaway option.  Is there a way to do this?
    Thanks!

    Hi
    Did You turn on Advanced Tools ?
    First Choise possibly - Visa avancerade verktyg / Show advanced tools
    TimeLine set to show ONE ROW of Clips.
    Then take a photo (.jpg) and drop it ON TOP OF the Clip in TimeLine where You want it to be.
    Now You should get a drop down Menu - Select Cutaway.
    Done
    in iMovie'13 (version 10.0.x) this is very different !
    Yours Bengt W

  • How to watch flash based videos without adobe flash installed using Safari

    How do I watch flash based videos without adobe flash installed using Safari?

    Once you have Chrome installed, activate the Develop menu in Safari (go to Safari Preferences > Advanced > Show Develop Menu). You then will see under the Develop menu the Open Page With option and Chrome will be listed there.
    So each time you open a page with Safari requiring Flash, you use that menu option to open the same page in Chrome.

  • Is there a way to import my STD quality video without converting it with another program?

    I understand how to import the HD quality video through imovie, but cannot seem to import the STD quality video without first converting it through another program? Anyone know how to do it without the cumbersome converting process? Thanks.

    What kind of camcorder did you use to shoot the video?
    If you aren't sure, will the STD quality video play in QuickTime Player? If so, click Command-I to open the Inspector and tell us everything listed by the word FORMAT: as well as the dimensions of the clip.  (Instead of Command-I you could alternatively click WINDOW/INSPECTOR.)

  • Importing Video without Fire Wire

    How do I import video from my Sony HI8 camera which is not equipped with fire wire. Is it possible to do this using the USB port and if so How. Thanks. I am a Newbee

    If your Olympus software is incompatible with Mac, have you tried using a memory card reader to upload those photos? That's the great thing about Macs - you can usually do without the camera drivers and software,
    Long story short, I do hobby underwater photography/video and my equipment,while it works fine, is 1990 vintage, bulky, and a pain in the butt to travel with. I wanted to up grade to a camera that was small, would do stills and video and had an underwater housing available. I settled on the Olympus 710 with the 1 gig XD card. Problem was that the salesman told me that it would download into my HP and I could use Windows Movie Maker to edit movies. WRONG! WMM uses .avi format the camera saves in .mov. WMM can't use .mov so i bought a conversion program which converted it to .mov.avi.I now have 3 conversion programs, none of which work and to tell you the truth I wanted to strangle someone. A buddy of mine has a MAC and said it was the answer. I connected my camera to his Macbook and it immediately downloaded the photos and video without Olympus software and I could use the video in Imovie. I am happy. Now I just have to solve the "old stuff" problem. This forum has been very helpful.

  • No Hardware Accelerated Video without monochromatic flickering

    I have an ATI Radeon 5700, using fglrx/catalyst driver (weird crashes with FOSS driver, libva problems).
    In both Boxee and XBMC, iI set the hardware accelration option to auto-detect and it settles on VDPAU/VAAPI.
    Videos play, however all videos (not just HD) appear in a flickering monochrome.  If I set it to Basic Rendering, videos play fine, except for HD video which now stutter.
    VLC can play the same videos without any problems.
    So what should I do? Is there an amdcc setting I can manipulate to help with this, or do I just have to wait for for either media center to update their shiznit? I mean boxee barely works in arch (not without an insane amount of tweaking) but I'm fairly surprised XBMC gives me the same nonsense. 
    Thanks for your input!
    XBMC: 10.1-1 (extra)
    Boxee: 0.9.23.15885-3 (AUR)
    Catalyst: 11.2-1
    nomodeset is in grub, overscanning is in affect, and fglrx is loaded on boot.
    Last edited by yochaigal (2011-04-05 05:21:03)

    Adnium wrote:
    Hi,
    I have had a problem with my 17" i7 Macbook Pro for a while now, and have been unable to find any information on it. When attempting to play H.264 videos, I get the following error messages in the Console:
    <snip>
     I should point out that this error appears any time I use an application which uses hardware accelerated video, including Quicktime X, Safari/Webkit, etc. I have searched around for solutions to this problem, but haven't been able to find anything. 
    Using internal/external display makes no difference either.
    So far, I have tried re-installing 10.6.7 using the Combined Updater; repairing disk permissions; using various different browsers; uninstalling Perian; and waving a stick over the Mac. None seem to have solved this issue, and I'm beginning to suspect this is a hardware problem.
    Does anyone know how I can fix this without sending it in to Apple?
    Thanks for your help.
    Ah yes, when you waved the stick over the Mac, you didn't tap three times on the monitor!
    Ok, kidding aside, you did backup your data right? Should do so because the next step is likely a bit risky.
    So you did reinstall OS X fresh, from the installer disks and then updated? Same problem? Right? ok.
    Have you turned off integrated graphics in the Energy savings panel yet? this forces the use of hardware graphics.
    Does it only occur in Safari, iTunes and Chrome?, cause all these are based upon the *cough* (insecure) webkit foundation. Perhaps Apple had to turn off somethings, perhaps that's reporting the errors.
    Alas, if your using Firefox are you having any issues?

Maybe you are looking for