Slow waveform refresh time on timeline (PrPro CS CC & CC2014 & CC2014 8.1)

I LOVE so many things about this new release. The one persistent, "always dealing with" issue I have is I have to wait for the audio waveform to refresh most times when I zoom in and out or even just scroll back and forth on the timeline. This is a huge slowdown/impediment issue for me.
( i copy text from here : Audio waveform refreshes display slowly on timeline (PrPro CS6) ) <--no solution
example in video : adobe cc2014 - YouTube
In my workplace all my colleagues have a similar problem, and no solution!
Spec:
CPU: AMD 8350, Intel Core i7-4820K, Intel Core i5-4690K
Videocard: GeForce GTX 580, GeForce GTX760
RAM: 16Gb, 32Gb
HDD: SSD
OS : WIN7 and Win8 and Win8.1
and so on, I want to say that it's not because we forgot to install latest drivers, turn off bitcoin mining  or similar, we work with premiere more than 8 years and this is Totally unacceptable!
so... what is real solution for this? New patch?
Sorry for bad english! Thanks!

Harm Millaard wrote:
Since all their posts at the CreativeCow are completely lacking any useful information, it seems that OE (Operator Error) is the common denominator. OE in terms of using outdated drivers, lacking hardware, incorrect setup, background processes, improper configuration, and name all the other OE's one can think of.
There are many issues which are in CS6 and they are not Operator Error. My computer exceeds the minimum requirements of Premiere Pro and still have the same issue. On the other hand I have reinstalled several times but can't get Encore DVD menus, and also the title templates is buggy because I can't access the wedding templates. Supporting the application will not yield any further development to correct these issues. The bottom line was that CS6 was a rushed release since Adobe are giving themselves less time to develop the next version as compared to what they used to do. In less than 9 months they will be releasing 6.5 with fixes to all these issues and we will be forced to pay for the upgrade again becuase there will be no support for 6?? I think Harm get the upgrade for free so that you can continue to support Adobe, even if the software is messed up you will simply turn a blind eye. You should test this on an average system most users use not on your monster!!

Similar Messages

  • Slow waveform reading time when digitizer is combined with serial port command

    Hi All,
    I'm using Digitizer PCI-5112 to capture and differenciate waveforms. The waveform measurement from NIScope will be used to determine the command to be sent to Newport ESP 300 motion controller.
    When I run read.vi the digitizer will read the waveforms in a high speed as I wanted. For the same waveform, when I combined read.vi with command to ESP 300 (becomes control.vi) the waveform reading becomes very slow (approximately only 1 waveform per second). Is this happened because of hardware limitation of ESP 300 ? Is there anything wrong with my program to send the command to ESP 300? or Is there any other way so I can keep reading the waveform in a high speed? I realize may be this is because I put the waveform reading part and sending command part in the same loop. But I don't know any other way to do this. I would appreciate any clue or answer. Thank you very much.
    Attachments:
    control.vi ‏156 KB
    read.vi ‏108 KB

    Hi Dennis, Thank you for the response.
    Sorry, I forgot to attach Positioning.vi at my previous message. This Positioning.vi is used to read the position of the axis. I think I get what you mean, I've tried to remove the while loop for the Positioning.vi but it didn't give any effect. Could you kindly check this positioning.vi for me? 
    Actually this is my first time communicating Labview with motion controller. I got those functions from my colleague. Is there any example or library I can refer for the 'normally used' serial functions? (my connection is RS232) It would be very helpful for me.. Thanx 
    Attachments:
    Positioning.vi ‏18 KB

  • Premiere Elements 10 slow GUI refresh

    Hi all,
    I am experiencing a very slow GUI refresh rate using Premiere Elements 10. It has been happening since I first started using the program, but I am using it a bit more now and it's starting to frustrate me.
    Basically, as soon as I open the program and create a new project, any action which changes the screen e.g. maximising, resizing the timeline, changing the timeline scale etc. occurs very slowly. For example, maximising the window takes approximately 4 seconds to complete, and resizing the timeline is very laggy.
    It is shown reasonably well in the following clip, although it is much more pronounced for me: http://www.youtube.com/watch?v=8C7GbqXir8o&feature=youtu.be
    This issue has been discussed in a few other questions, but none resolved the issue (that I have found) or have kind of gone off topic, so thought I would ask myself in an effort to resolve it.
    A couple of points to note:
    Occurs WITHOUT any video loaded i.e. with a completely empty project. (Loading video doesn't have any effect)
    It is not affected by the selected preset. They all have the same issue.
    Somewhat curiously, playback of video is fine.
    Disabling desktop composition as suggested in another post on this issue results in a slight improvement, but certainly does not make it go away.
    Computer specs:
    Windows 7 Pro x64 SP1 (I am using the 64 bit version of premiere elements)
    Core i5 2500
    8 Gb RAM
    EVGA GTX 460 1Gb
    Asus Z77 sabretooth motherboard
    Primary drive 2x 64Gb SSD's RAID 1 (OS and performance sensitive applications incl. Premier Elements)
    Secondary drive 2x 1Tb HDD's RAID 1 (Other applications & data storage)
    Note that the drive configuration and motherboard have been changed recently, and had no effect on this issue.
    Thanks in advance for any help.

    Thanks everyone for the responses, I really appreciate your assistance and thoughts.
    Here goes with how I have got on with your suggestions/answers to your questions:
    Steve:
    First of all let me just make it clear that this is occurring with nothing loaded - a completely blank project. Also, it would appear that it is a window refresh issue rather than program performance as such, as rendering/playback work just fine. This is just my initial impression though.
    Footage is  from a GoPro HD Hero 2, recorded in 720p at 60 fps (actually 59.94). I convert it to .avi using the GoPro Cineform software prior to editing. I use the DSLR 720p 60 preset. I have also tried the 720p60 AVCHD LITE preset which does not have any noticeable effect on the issue. I have tried using unconverted footage straight from the camera; again this has no noticeable effect on the issue. When I add video to the timeline, there is no red line above it  - although when I apply an effect e.g. brightness and contrast one does appear.
    I have never used still images so I don't know if they have any effect.
    I checked just now for OS updates and and a few (11 if I recall correctly) which I installed. They had no effect on the issue.
    I have also just updated to the latest graphics driver (320.49) and quicktime (7.7.4), again no effect on the issue.
    The RAID 1 setup is a data mirroring configuration - each drive is an exact mirror of the other. I have this  as I have had a few HDD's fail and having to get a new one, reinstall, etc. is just a nightmare - not worth it when the risk can be effectively eliminated for a bit extra $. I do not think this is the cause as I have had a few different configurations while using premiere elements (the SSD's are quite recent) and the issue stays the same.
    John:
    Thanks for the links, although I wasn't able to find anything that helped with the issue.
    I will have a look for what you mentioned re an older driver being potentially better, and will try it when if I find one that looks promising and I get some time. I am not overly hopeful though as I have used several different drivers, and I have not noticed any difference.
    Bill:
    I completely agree - I always go to the source for drivers rather than relying on driver update programs etc.
    ATR:
    Firstly I would just like to point out that the link was not my video - it is someone else's, who appears to be a somewhat similar issue. Apologies, I should have made that clear in the original post.
    What is really bugging me is adjusting the 'zoom' on the timeline (little bar on the right of the screen you drag left & right). When I move it, it will take a few seconds for everything on the screen to refresh. Not a massive issue, but really annoying!
    In response to your points though;
    I was not aware that the timeline scrollbar ghost trails are common to other versions. Is this a common issue or just some isolated instances of it? I have personally not noticed any bits of clips remaining on the timeline.
    I must confess I am a bit of a novice with this program, so would you be able to expand on what playback quality & playback settings I should be looking at? (Note that the playback itself is not an issue for me). Also, how might I go about checking for pile ups of preview/conformed audio/conformed video? If it helps I have all the scratch files in a dedicated folder on the SSD.
    I have just defragmented, but it had no noticeable effect.
    I would rather not use a registry cleaner (had some bad experiences in the past and not convinced they make a difference), and my computer is relatively clean. I do a complete fresh reinstall every 6 months or so and I am not in the habit of downloading all sorts of crap.

  • AppV 5 slow to refresh with roaming profile (no redirects) but fast with local profile

    Hi,
    I have an issue I can't get thought out. I have an AppV5 SP3 full infra, with SMB share and local caching of packages enabled. Everything works from a functional level. However I have an issue where users with a roaming profile get a very slow AppV refresh
    during login.
    I created a few testaccounts, a few with local profile and a few with roaming profiles. For these testusers there are NO folder redirects. The only difference between them is local profile or roaming profile.
    When I login with a local-profile user initially, the AppV client rather slowly refreshes the applications and shortcuts. It generates quite some CPU load on the RDS host, but as soon as the shortcuts are placed everything is fine. When I log that user off,
    and log in again, the shortcuts are there immediately and I can immediately start the applications (Office 2010 for example). Blazing fast. Also when logging in, the refresh-UI is there for about half a second, it really flashes and it's done.
    Then with a testuser with roaming profile, the initial refresh is about the same. But when I logoff that user and login again, it's all very slow. The shortcuts are there but blank initially, it takes about 5-10 seconds to get the correct icon. It takes
    much longer before the refresh actually starts (sometimes up to 30 seconds after login), and it takes 5-10 seconds to do the refresh, with 100% cpu load on the thread AppVclient.exe is running on. Also right after loging in when the shortcuts are blank they
    don't work until they get the proper icon. WHen everything is refreshed it works all fine though. It's just painfully slow at start.
    I don't understand this. I can reproduce this every single time. Without folder redirects I don't see the difference between roaming and local profile from AppV perspective, as the roaming profile is of course copied to the server and in that sense the server
    just works with a local copy anyway.
    Anyone encountered this, and how to troubleshoot, or better fix this?

    So is the fact that there is a 5-10 second delay during refresh actually an issue? What I mean by that is - are any users comparing the local profiles with roaming profiles experience, or complaining that the delay is there?
    Roaming profiles and Folder redirection are of course very simple to configure; however for the best user experience I recommend managing profiles with a real profile management solution.
    If you have MDOP, then you'll also have access to UE-V. You've mentioned your environment is RDS, which sadly doesn't get UE-V, even though you have App-V.
    Here are some resources on UE-V + App-V and what's required when managing App-V with roaming users:
    How To Use Microsoft User Experience Virtualization With App-V Applications
    Application Publishing and Client Interaction: Roaming registry and data
    Here's also some resources on App-V performance worth looking at:
    Performance Guidance for Application Virtualization 5.0
    App-V Performance Best Practices: New Project VRC White Paper
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • Device Default Refresh Time

    I was wondering what the default refresh time is for ZCM 11.2.4 MU 1?
    Is there a recommended time that we should be setting this too?
    Currently we are set at 2 hours, for a partial refresh, and 12 hours for a full refresh.
    Has anyone seen/recommend that those settings should/could be adjusted to allow for faster refreshes?
    Thanks,
    -DS

    That will "Slow Down" the refresh rate, but may speed logon times.
    Unchecked, means it would check immediately and not delay to speed logons.
    The Default delay is 5-6 minutes.
    If you want new assignments to appear more quickly throughout the day,
    you need to lower the partial and/or full refresh.
    Partial Excludes Bundles but is everything else.
    Full is everything.
    Since Bundles may be want most interests some customers, I have seen
    some have just turned off Partial and only do full at an increased
    frequency.
    Monitoring performance is important as you decrease the interval.
    On 3/5/2014 1:56 PM, dschaldenovell wrote:
    >
    > Good day,
    >
    > We have now checked the box for Timed Refresh : Random Time to Wait :
    > setting the following : Minimum: 60 seconds Maximum 75 seconds Full
    > refresh Schedule 0 days 12 hours 0 minutes and Partial Refresh Schedule
    > 0 days 2 hours 0 minutes
    >
    > Previously this was unchecked and the values were grayed out but read 60
    > seconds and 75 seconds respectively
    >
    > We are going to be asking the staff to test
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • How to change Refresh Time in  a Discoverer Portlet?

    Hi,
    I have added a discoverer portlet to my main portal page. The minimum refresh time for the discoverer page i could set is 1 hour. Is there any way i could change it to 1 min as this is getting real time data in the database which i would like to display immediately.
    Any help/suggestion is most welcome. Thanks in advance.
    Regards
    Goutam

    Hi, i have the same problem.
    i have searched both metalink and here but found nothing .. doesnt anybody know how to change the discoverer portlets refresh time interval anything other than 1 hour,1day,1week etc. (they are the only options available)
    Any help would be appreciated.

  • How to display on the graph three or more waveforms where time scale is not an index of array but a real time

    How to display on the graph three or more waveforms where time scale is not an index of array but a real time:
    I measure three voltages Va, Vb, and Vc on my Test stands every 3sec. So I’m building four arrays (Va, Vb, Vc, Time) and combine all in one.
    Time
    Va
    Vb
    Vc
    0
    5
    3.5
    2.8
    3
    4.9
    3.6
    2.9
    6
    4.8
    3.8
    2.1
    Now I need to show on the graph in which scale X is “Voltage” and scale Y is “Time”.
    How can I do it?
    Thanks a lot,
    Boris

    Hi, thanks all your reply.
    You may find "points_to_bar_graph.vi" from this website, I find it by this way.
    I will ask a stupid question: I don't have any photo processing software, how can I save the vi into a picture format?
    So here I just paste it into word document.
    Attachments:
    question.doc ‏520 KB
    points_to_bar_graph.vi ‏62 KB

  • Application selects  is relatively slow in some times

    Dear Friends,
    Some selects of our application is relatively slow in some times (When database is slow) . But same selects shown good performance in most of the time. Database is always not slow in peak hours. I feel there would be insufficient space in Execution plan area or Sort area.
    Can you give me how i change these settings in my database. and where these execution plan and sort area located.
    regards
    upul Indika.

    Hi,
    Try to check for the SGA size in your database. Accordingly increase the shared pool size and the buffer cache size which wil generally improve the performance of the queries. Make sure you donot increase the sixe of shared pool in excess of the size of the SGA.
    Regards
    Bharath

  • HT1338 My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds. Can you help me?

    My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds before the screen changes. This has been happening the past 24 hours. Any ideas?

    First, back up all data immediately, as your boot drive may be failing.
    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • Slow query execution time

    Hi,
    I have a query which fetches around 100 records from a table which has approximately 30 million records. Unfortunately, I have to use the same table and can't go ahead with a new table.
    The query executes within a second from RapidSQL. The problem I'm facing is it takes more than 10 minutes when I run it through the Java application. It doesn't throw any exceptions, it executes properly.
    The query:
    SELECT aaa, bbb, SUM(ccc), SUM(ddd), etc
    FROM MyTable
    WHERE SomeDate= date_entered_by_user  AND SomeString IN ("aaa","bbb")
    GROUP BY aaa,bbbI have an existing clustered index on SomeDate and SomeString fields.
    To check I replaced the where clause with
    WHERE SomeDate= date_entered_by_user  AND SomeString = "aaa"No improvements.
    What could be the problem?
    Thank you,
    Lobo

    It's hard for me to see how a stored proc will address this problem. I don't think it changes anything. Can you explain? The problem is slow query execution time. One way to speed up the execution time inside the RDBMS is to streamline the internal operations inside the interpreter.
    When the engine receives a command to execute a SQL statement, it does a few things before actually executing the statement. These things take time. First, it checks to make sure there are no syntax errors in the SQL statement. Second, it checks to make sure all of the tables, columns and relationships "are in order." Third, it formulates an execution plan. This last step takes the most time out of the three. But, they all take time. The speed of these processes may vary from product to product.
    When you create a stored procedure in a RDBMS, the processes above occur when you create the procedure. Most importantly, once an execution plan is created it is stored and reused whenever the stored procedure is ran. So, whenever an application calls the stored procedure, the execution plan has already been created. The engine does not have to anaylze the SELECT|INSERT|UPDATE|DELETE statements and create the plan (over and over again).
    The stored execution plan will enable the engine to execute the query faster.
    />

  • Snapshot refresh time

    Hi
    I have the following snapshot on oracle 8.1 :
    CREATE SNAPSHOT LSBAN30Y_SNP
    PCTFREE 0
    PCTUSED 99
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 256000 K
    NEXT 25600 K
    MINEXTENTS 1
    MAXEXTENTS 505
    PCTINCREASE 0
    FREELISTS 1
    FREELIST GROUPS 1
    BUFFER_POOL DEFAULT)
    TABLESPACE BP_DATA
    LOGGING
    NOCACHE
    NOPARALLEL
    USING INDEX PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    BUFFER_POOL DEFAULT)
    REFRESH COMPLETE
    NEXT greatest(trunc(sysdate+1), NEXT_DAY(trunc(sysdate)-5 ,'MONDAY')) + 4/24 + 30/1440
    WITH ROWID
    USING DEFAULT LOCAL ROLLBACK SEGMENT
    DISABLE QUERY REWRITE AS
    SELECT
    ACCT_ID BILLING_ACCOUNT_ID,
    CUST_ID BLG_SYS_CUST_ID,
    ACCT_ESTAB_DAT SYS_ACCT_ESTAB_DAT,
    ACCT_STAT_CD SYS_ACCT_STS_CD ,
    decode(SCE_SYS_ID, '1', 'C', '2', 'C', '3', 'C', '4', 'W', '5', 'W', '6', 'E', '7', 'E', null) LEG_SYS_RGN_INDR,
    BTN BLG_ACCT_TLPHN_NO ,
    BTN_CUST_CD,
    BTN_SFX EASTERN_SUFFIX,
    TYP_OF_ACCT_CD BTN_TYP_OF_ACCT_CD,
    PRI_CLSS_ID CLSS_OF_SRVC_CD,
    ' ' BTN_CONTRACT_NO,
    RTRIM(BLG_NM_LN1)||' ' ||LTRIM(BLG_NM_LN2) BTN_BILLING_NAME,
    PCL_IND PCL_INDR,
    BILL_PER SYS_BILL_PRD_INDR,
    GR_ACCT_ID SYS_SPCL_BLG_GR_NO
    FROM
    CSBAN10V@UCDWP001
    where ACCT_MKT_UN_ID in ('C', 'D', 'F', 'G', 'I', 'L', 'O', 'P',
    'R', 'S', 'V', 'W')
    and rownum < 5000000
    I have created indexes on BILLING_ACCOUNT_ID and BLG_SYS_CUST_ID.
    There are 4.3 million records in the snapshot.
    It takes 6hrs to refresh the snapshot.
    The questions I have are:
    1. How can I reduce the refresh time? Is it because of the indexes? Should i make any change to the create snapshot script?
    2. The create snaphot query works fine without the rownum < 500000 statement in oracle 9i but in oracle 8i it gives
    CSBAN10V user not found in UCDWP001 error. It works OK with the rownum < 5000000 statement. Why is that so?
    thanks
    prash

    You are specifying that the refresh must be COMPLETE, so Oracle has to transfer all 5,000,000 rows over the wire from the remote database every time. If you specified that the refresh could be FAST, and created a materialized view log on the remote table, Oracle would be able to transfer only the changed rows each time you refreshed.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Changing default refresh time for the UWL.

    Hello,
    I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
    Aniketh R.

    We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
    What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

  • My Mac Book Pro is slow and at times I have to reboot to connect to the net

    My Mac Book Pro is slow and at times I have to reboot to connect the net.  Also wondering how do I check if my software is up to date?  Thank you.

    To check to see if your software is up to date, go to >Software Update and you can check for updates.
    No idea why your Mac is slow--there could be a variety of things that could cause slowness. A good start would be to see if all your RAM is recognized. >About this Mac will show you how much RAM you have. You can also open Activity Monitor and check your RAM usage.
    Also, how full is your hard drive? You should have a minimum of 10% free space for the OS to operate properly, and 15% to 20% is better.
    No idea why you have to reboot to connect to the internet, but it could be related to the slowness. Rebooting will free up RAM among other things.
    Which MBP do you have and which version of the OS are you running?

  • Slow Shut Down Time For Macbook Pro Retina Snow Leapord

    Hello, I was hoping somoene could help me with the following problems.
    I have brand new Macbook Pro Retina, 15inch, 16G RAM, 500G of SSD, running Mountain Lion, and lots of professional recording software. My macbook frequently shuts down after 30 seconds, that wonderful grey wheel spinning in the center of the screen as if it were an old PC.
    I've contacted apple frequently. They check to see that I've repaired disk permission, they reset...the RAM i believe, they ask if i shut down all the programs. Even through doing all of this, usually my macbook takes 30 seconds to shut down. Sometimes it takes only 5, which is how it usually should be. ANd this occurence seems to be inconsistent with the apps I use. Sometimes it takes long to shutdown when i've barely used a thing. Other times it shuts down immediately when i've used a lot of different programs at once. So there's no constant.
    The apple boys suggest reformatting the computer to make sure it isn't a hardware issue. I refuse to accept that after only 3 months of use I already have to reformat everything. It's not the most enjoyable experience because I'd have to reinstal all my audio software despite Time Machine's magic tricks. Any suggestions?
    Here is a link I've found on the matter: http://thecustomizewindows.com/2013/02/fix-mountain-lion-slow-shut-down-time/

    These terminal commands decrease the excecution time of a process that has caused slow shutdown times for many users. This resolved my slow shutdowns. IF you are comfortable using terminal you can give them a shot, but be VERY careful using terminal.
    These terminal commands should also fix the problem then and kill the services after 2 seconds:
    Code: 
    sudo launchctl unload /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist  sudo defaults write /System/Library/LaunchDaemons/com.apple.coreservices.appleevents ExitTimeOut -int 2  sudo launchctl load /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist

  • Input Form/Reports Refresh time

    Hi all,
    We have input form/reports which takes about 45 seconds to refresh which is ok for the first time but the frustration from the user community is that every subsequent refresh also takes 45 seconds for even a small change. Is that possible to reduce time on the subsequent refresh time?
    Please share.
    Thanks,
    D

    Hi Devang,
    Refresh means that all data on the form have to be read from database. You can play with user settings: Refresh only Expanded and Inserted Members; Refresh only Data on "Save & Refresh Data", but not sure it will help.
    In general, the initial refresh for 45 seconds is a bit long. Do you have not default measures and dimension member formulas in the report?
    Vadim

Maybe you are looking for