Slow Wi fi for last 2-3 months
Bt Infinity - Home Hub 3.
Superb wi fi speed since new router delivered around 2 years ago until...............2-3 months ago. Since then download speed anything from 5mbps to 0.19. Delivery speed to house from the exchange is 18- 19 Mbps even though it was sold by BT as 22-23 Mbps
So called BT several times - they remotely re-set the home hub and router or told me to do it manually - speed was better for a while but then just gradually drops off and dies altogether on the Dell PC whereas the laptop has faster speed even when the laptop is sat right next to the Dell PC which has virtually nothing.
BT engineer has been round and can find nothing wrong although did admit that BT always boost signal strength around the time of the appointment . Nothing has changed in the house, position of router upstairs and Dell downstairs is same as it has been for last few years.
? Faulty dongle (which we are investigating)? Currently use TP Link wireless N adaptor, but no better than when we had the Dell dongle thing that came with the PC stuck in the back - use or is there some thing odd about the router all of a sudden - do these things wear out? BT have been of little help other than "re-set your router" - but we rarely (if ever) had to in the past.
Faulty BT router for wi-fi or faulty PC? or its wi-fi dongle? Any suggestions? Been going on for weeks and weeks now.
Many Thanks in advance
Solved!
Go to Solution.
Hi OldgrumpyB,
Thanks for posting back.
I've checked our email queue and we have received your details. You're very close to the top so it won't be long until you've received word back to help sort things out.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
Dynamic Variable for last day of month
Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
calmonth key figure due amount
Jan 07 this should show due value on last day of jan 07 (i.e 31st jan 07)
Feb 07 this should show due value on last day of feb 07 (i.e 28th feb 07)
Mar 07 this should show due value on last day of mar 07(i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
WrushaliHi,
We can assign multiple single values to the customer exit.
So in the Query take CALMONTH in rows.
And take your KF in column with Customer exit variable restriction on CALDAY.
So in the code of this Cusotmer exit varible, from the Current date find out the year of the current date and then assign those 12 required days to this variable.
With rgds,
Anil Kumar Sharma .P -
How do I know what transactions executed by specific user for last month
All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...) -
My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where can I take my Macbook Pro for service near Jackson, Michigan?.
Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
I've had this Mac for less than 6 months and worked fantastic until now. I'm not 100% familiar with Mac so any help would be helpful. Thanks!
Please describe the problem in as much relevant detail as possible. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
My DSL has slowed down over the last few months
Guys;
My DSL has slowed down over the last few months. I had the service that is up to 1.5 M and I used to get 1.2 ish on the verizon speed test, lately I've been getting between .9 and 1.0 at the most. I got the info from the speed test and here is a portion of that info:
------ Web100 Detailed Analysis ------
Client Receive Window detected at 1045440 bytes.
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
SHould I be concerned by the portion that I bolded and underlined?
Also, I just last night upgraded my service to the 1.1 to 3.0 service but I've not gotten a speed increase. Any suggestions?
ThanksHere is a complete post of the information from the verizon speed test:
Analysis information:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [130680]
running 10s outbound test (client to server) . . . . . 471.01Kb/s
running 10s inbound test (server to client) . . . . . . 556.87kb/s
------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_29
------ Web100 Detailed Analysis ------
Client Receive Window detected at 1045440 bytes.
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 1247.01 msec; the Packet size = 1322 Bytes; and
There were 14 packets retransmitted, 4 duplicate acks received, and 5 SACK blocks received
The connection stalled 1 times due to packet loss
The connection was idle 2.65 seconds (17.66%) of the time
This connection is sender limited 75.84% of the time.
This connection is network limited 24.16% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [xxx.xxx.xxx.xxx] but Client says [xxx.xxx.xxx.xxx] -
Selecting, reading and sum of billing quantity for last 12 months in transformation end routine
Hi experts,
i have requirement to write end routine to read a DSO for last 12 months sales quantity for each month and sum value pass to keyfigure
not interested using bex variable, while data loading from source to target dso in end routine i am trying to read another DSO which is same as my
target dso where information is stored by fiscal period, year material etc. finally there is a keyfigure in target whih needs to be filled with sum of 12
months sales quantity, for each record form sourc to target maximum of 12 records will be in read dso (for 12 months) my routine is like below.
i am not expert in abap please kindly gothrough and guide me in this
TYPES: BEGIN OF s_/BIC/AZOSLS00,
FISCPER type /BI0/OIFISCPER,
FISCVARNT type /BI0/OIFISCVARNT,
PLANT type /BI0/OIPLANT,
STOR_LOC type /BI0/OISTOR_LOC,
/BIC/MATERIAL type /BIC/OIMATERIAL,
VTYPE type /BI0/OIVTYPE,
BILL_QTY type /BI0/OIBILL_QTY,
END OF s_/BIC/AZOSLS00.
DATA: it_/BIC/AZOSLS00 TYPE TABLE OF s_/BIC/AZOSLS00,
wa_/BIC/AZOSLS00 TYPE s_/BIC/AZOSLS00.
SELECT
FISCPER
FISCVARNT
PLANT
STOR_LOC
/BIC/MATERIAL
VTYPE
BILL_QTY
FROM /BIC/AZOSLS00 INTO TABLE it_/BIC/AZOSLS00
FOR ALL
ENTRIES IN RESULT_PACKAGE
WHERE
below field is from value of fiscal period (which is fiscal period -999 ex: for 001.2014 this
value will be 002.2013 so 12 months including current period)
FISCPER >= RESULT_PACKAGE-/BIC/ZFISCPERF
below is result filed fiscal period (here i dont know which keyword or statement to be used to select
interval values this between statement giving syntax error that can not be used in where for for all entries
between RESULT_PACKAGE-FISCPER
AND
FISCVARNT = RESULT_PACKAGE-FISCVARNT AND
PLANT = RESULT_PACKAGE-PLANT AND
STOR_LOC = RESULT_PACKAGE-STOR_LOC and
/BIC/MATERIAL = RESULT_PACKAGE-/BIC/MATERIAL .
SORT it_/BIC/AZOSLS00 BY FISCPER FISCVARNT PLANT STOR_LOC
/BIC/MATERIAL .
LOOP AT RESULT_PACKAGE ASSIGNING <result_fields>.
READ TABLE it_/BIC/AZOSLS00 INTO wa_/BIC/AZOSLS00 WITH KEY
below dont know what statement i need to use in read statement for interval of fiscal periods
giving error that >= can not be used
FISCPER >= <result_fields>-/BIC/ZFISCPERF
FISCPER = <result_fields>-FISCPER
FISCVARNT = <result_fields>-FISCVARNT
PLANT = <result_fields>-PLANT
STOR_LOC = <result_fields>-STOR_LOC
/BIC/MATERIAL = <result_fields>-/BIC/MATERIAL
BINARY SEARCH.
BREAK-POINT.
IF sy-subrc = 0.
below for each record there will be 12 records in read so sume of 12 records quantity i need to pass to result again dont know what to say here
sum statement giving error
<result_fields>-/BIC/ZLSTSLS12 =
sum(wa_/BIC/AZOSLS00-BILL_QTY).
ENDIF.
ENDLOOP.
friends please help me in this.
Thanks
Chandra.Hiii,
If you only want to store last 12 months data in Target ODS .
Then Create filter in DTP and write routine in filter for calmonth or fiscal period.
Refer the below link to create filter routine :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b2db87-639b-2e10-a8b9-c1ac0a44a7a6?QuickLink=index&…
Regards,
Akshay -
UDF for last day of week/month
Input is a Date(For example: 2010/03/12) in String format.
I need to extract the last day of that week and return it as a string output.
For example if input is 2010/03/12 and thatu2019s a Thursday my output should be 2010/03/14 i.e Saturdayu2019s date.
Similarly I need to extract last day of month too.
Thanks in advance
Soumen...Hi,
I did not develop this one... but just use "search" button on roseindia and you will have the answer (I think):
[http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml|http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml]
and do not forget that Google is your friend...
do a research with : Java last day of week, and you have plenty of examples.
Thanks.
P.S: Say us when you will solved your problem. -
Customer Exit for Number of Days from 1 st Apr to last date of Month Enter
Hello BI Experts,
I have a requirement to count the number of days from 1 st April of current year to the last date of month entered.
For example : The use will enter say July 2010 or 003.2010 (as Fiscal Year Variant is V3 ).
Today is 14 July ...So we have to first find out the end date of the July month ie 31 st July
Then go to 1 st April 2010.
Now calculate the Number of days between 1 st April to 31 st July 2010.
I consider I have to create two Customer Exit variable
as below
1 st customer exit Bex variable say ZLY_MTH ( Last day of Month Entered)
and i_step = 1
2 nd Customer Exit BEx Formula variable say ZF_NUMDAYS ( Number of days between two dates)
i_step =1 .
Please provide me the logic for the above two.
Thanks in Advance.
Regards,
Amol KulkarniPSUDEO CODE:
1. Initially LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZMONTH'.
2. Get the Month input using VAR_MONTH2 = LOC_VAR_RANGE-LOW+4(2)
3. Now calculate Month+1: VAR_MONTH2 = VAR_MONTH2 + 1 (Refer **)
4. Now calculate the Current Year: VAR_YEAR = LOC_VAR_RANGE-LOW+0(4).
5. Get the 1st Day of the Month (VAR_MONTH2): CONCATENATE '01' '/' VAR_MONTH2 '/' VAR_YEAR INTO L_S_RANGE-LOW.
6. SUBRACT 1 (0DATE) from this DATE (This will give the logic for last day of the current month)
Insert this code also for using the date conversions
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = VAR_MONTH2
IMPORTING
OUTPUT = VAR_MONTH2.
Pls. check out this logic. Guess it would solve your need.
Thanks,
Arun Bala -
my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5
What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't. -
Month doesn't appear in the axis for last 12 months
Hi !
I have created a graph which gives records for the last twelve months, my formula is:
if {Commande.DATE} >= dateadd('m',-12,currentdate) and {Commande.DATE} <=currentdate then {Commande.DATE}
At this point everything's fine ,
I have to create another formula to have Month name
from today which mean ,the order should be like this on my graph axis, 1st last month is febuary and last 12 months from today is March
March - April - May - June - July - August - September - October - November -December - January Febuary
here is that formula which I have called Month Sort order:
If month({@last12months})=01then
"Janv" else
if month({@last12months})=02 then
"Fév" else
If month({@last12months})=03then
"Mars" else
if month({@last12months})=04 then
"Avril" else
If month({@last12months})=05then
"Mai" else
if month({@last12months})=06 then
"Juin" else
If month({@last12months})=07then
"Juil" else
if month({@last12months})=08 then
"Août" else
If month({@last12months})=09then
"Sept" else
if month({@last12months})=10 then
"Oct" else
If month({@last12months})=11then
"Nov" else
if month({@last12months})=12 then
"Déc" else ""
in the Graph/Chart expert ,in the resulting dialog box I have set the following options:
On Change of: i have set the formula Month Sort order which will bring me the month name and for the order I have set in the Original order .
It works fine I retrieve records for last 12 months but on my axis ,the name for
the last 12 months doesn't appear in this case ( March) it is blank ,I have the records for March but not the month name March in my axis it show april to febuary but not March
Thank you for helping meThank you for your reply , but this doesn't solved my problem ,
I'm using a data from SQL2005 which is a stored procedure ,they have created a datefield named "DATE" and group the data the 1st of each month in this SQL stored procedure ,the only day for each month that I have in this data is the first of each month for each record found ,so I've changed the formula for this, to get records the 1st of each month for the last 12 months :
the new Formula for is:
if >= DateAdd("m",-12,CurrentDate) - day(CurrentDate)+1 and
<=DateAdd("m",-1,CurrentDate) - day(CurrentDate)+1 then
this condition formula bring me _Null datefield_ ,and this is why I see a null label axis at the bottom,do you have an idea how I can eliminate the null datefield , I need to have only the last 12 months data on this graph but I need all data for the past 3 years for 2 other grah on this same report
Thank you very much , -
Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? My iPhone was stolen and the photos in it are very precious to me. Many thanks.
On a new device you can only download what is currently stored in "My Photo Stream" in iCloud. iCloud keeps up to the last 1000 photos, but only the photos, that have been added during the last month. Older photos may be removed, when the time is up. On other devices you may be seeing older photos as well in "My Photo Stream", that will depend on the available storage on those devices, and when the Photo Stream has been enabled on those devices, see: My Photo Stream FAQ - Apple Support
If you are seeing other photos in the Photo Stream on other devices, that you want to save, mail them to you from the other devices.
Have you tried to restore your iPhone from the last iCloud backup of the old phone? The backup will contain the photos in the Camera Roll, but not the photos in Photo Stream. iOS: Back up and restore your iOS device with iCloud or iTunes -
Hi,
Iam getting stad report for last one week,iam not getting the stad report for last month.i want to get stad report for particular day in last month.how to rectify the same.
ThankuHi,
rsau/local/file /usr/sap/LID/DVEBMGS00/log/
you will have to set DIR_AUDIT parameter instead of it.
Set the following parameter with reference value:
Parameter Description Reference Value
DIR_AUDIT Directory for security audit files S:\ECP-AUDIT\ECP\DVEBMGS00\ECP_security_audit_log
FN_AUDIT Name of security audit file ECP_AUDIT_++++++++.AUD
rsau/enable Enable the Security Audit Log 1
rsau/max_diskspace/local Maximum space for security audit file 2147483647
rsau/max_diskspace/per_day Maximum size of all security audit files per day (If you wish, otherwise let it be default '0')
rsau/max_diskspace/per_file Maximum size of one single security audit file (If you wish, otherwise let it be default '0')
rsau/selection_slots Number of filters to allow for the Security Audit Log (If you wish, otherwise let it be default '2')
rsau/user_selection Defines the user selection method used inside kernel functions (If you wish, otherwise let it be default '0')
activated profile in sm19,still iam not getting audit log for last week in sm20.
After Proper setting of Security Audit log parameters, the Application Server needs to be restarted to make the changes effective. You will only get the Audit Data since the activation of valid Security Audit parameter.
Regards,
Bhavik G. Shroff -
Can any one tell me how to deactivate vendors in sap whom we have not done business for last 18 Month>
Hi Jahanzaib,
You can go to transaction FK05 and block the vendor if you want to deactivate the vendors.
Thanks,
Ameet -
hi,
i have a column amount. i need to find the avg of it for last 12 months excluding current month.
I have got a query to find it .but it is adding current month also with it.
AVG(SUM(amount)) OVER (ORDER BY ACCOUNT_MONTH_NO
ROWS BETWEEN 12 PRECEDING AND 0 FOLLOWING) rolling_avg,
please help me to write a query as i am a naive user of oracle.Like..
SQL> select * from test;
ACCOUNT_NU ACCOUNT_MONTH_NO AMOUNT
ACC1 1 100
ACC1 2 200
ACC1 3 300
ACC1 4 400
ACC1 5 500
ACC1 6 600
ACC1 7 700
ACC1 8 800
ACC1 9 900
ACC1 10 1000
ACC1 11 1100
ACC1 12 1200
12 rows selected.
SQL> select account_month_no,amount,
2 avg(amount) over(order by account_month_no rows
3 between 12 preceding and 1 preceding) avg
4 from test
5 where ACCOUNT_NUMBER = 'ACC1';
ACCOUNT_MONTH_NO AMOUNT AVG
1 100
2 200 100
3 300 150
4 400 200
5 500 250
6 600 300
7 700 350
8 800 400
9 900 450
10 1000 500
11 1100 550
12 1200 600
12 rows selected.Post sample data and expected output, so that we can help you better
Maybe you are looking for
-
Compressing attachments in entourage email
I am unable to compress attachments in my entourage email. I have Stuffit Expander installed, and I still can't compress pictures and video. Is there something else that needs to be done?? Please help Powerbook G4 Mac OS X (10.4.6)
-
Hi, I've been using E6 since summer and came around some smaller problems (beside those already recognized by the community). 1. I bought SanDisk 16GB class4 SDHC but it does not work in my phone. It works well in my PC and tablet. Tried several form
-
I am not receiving all of my emails in thundebird for multiple email accounts.
I have been using Thunderbird fo rover a year with no issues. All of the sudden, I am unable to receive all of my emails. I can see the missing emails on my phone or ipad, but not on my computer on the Thunderbird account. it appears to be displaying
-
i keep getting an error message saying "i do not have enough access privledges " when trying to sync i phone can anyone help me?
-
Hello, We have trouble whith advtrend.nlm We give the following commands which result in abend: advtrend advtrend reread advtrend reset abend : cpu hog detected by timer running process advtrend We are running zfs 6.5 sp1 there is no nlm available an