Slow wifi connection with windows 8

Hi! I have a problem with wifi drivers for windows 8 on my MacBook Air. The OS works great but wifi is too slow. I've read that could be a bug with latest driver versions, can you tell me where I can find older versions? Or there's another solution that I don't know?
I tried to search for answers on this community but I can't find anything.
Thanks,
Luca

I just found solution for my problem It seems that there is compatibility problem between Cisco 120N wireless router and new iPad 3'rd generation. The problem is occurs in WiFi "N" mode only. Once I switched the Cisco 120N wireless router to the "BG-mixed" mode than the WiFi transfer on my iPad is as good as on other devices. And when I switched my Cisco 120N to "Wireless-N Only" than the problems with WiFi transfer were unbearable, which clearly points out the incompatibilities to the N-mode only.
I begin to wonder though whether are there any wireless routers that would properly work with new iPad in "N" mode? Could you please let me know with which Cisco/Linksys/Netgear/D-Link/TP-link wireless routers iPad 3 works well in N mode?

Similar Messages

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

No wifi connections with Windows 8.1 on Lenovo Flex 2-14

I got me a new Lenovo Flex 2-14 with Windows 8.1 on it yesterday, but I can't connect to my wifi network. In the tray there's always the red cross (not the yellow symbol) and no network is found at all.
I read that a lot of users experience this, so I tried multiple drivers but none of them works. I tried the one pre-installed on the D drive, the newest one from the Lenovo website and also some that I found via Google when I searched for my wifi-adapter (it's a Realtek RTL8723BE). But as I said, no driver works.
Does anybody have an idea what I could do? It's a completely new notebook, so I didn't change any settings.
Thank you!
Solved!
Go to Solution.

Actually I have no idea what wireless adapter I have, on the Lenovo page both drivers are listed. When I install the Realtek driver I at least see an entry in the Device Manager, whereas when I install the Intel driver nothing happens at all. I deinstalled the Intel Tools and reinstalled the Realtek driver afterwards, but nothing changed.
In my router's settings I can only choose between channels 1 to 13, as far as I know these are at 2.4 GHz, right?

Slow WiFi Connection With New Router TP-Link W8960N

Hi Apple Support,
A few weeks ago I've purchased a TP-Link TD-W8960N wireless modem router so that I can share my WiFi internet with the following devices:
~ iMac running Snow Leopard OSX Version 10.6.7
~ iPhone
~ iPad
~ Mini-PC / Home Theatre PC (Running Windows 7)
At first my iMac wouldn't connect to the WiFi, but after changing it to Channel 11. My iMac successfully joined the WiFi Network.
But the past week my iPhone & iPad whenever I browse the internet it would respond very quickly.
But my iMac and Windows PC, some websites they would respond quick and several other websites it would not respond at all and takes such a long time to bring up the website.
I'm on a ADSL2 broadband connection.
Mac OSX version 10.6.7...
I tried also updating the router firmware...
My Current WiFi settings are:
Channel: 11
Mode: 11bgn (and I've also tried 11b, 11bg, and 11n only)
Bandwidth: 20Mhz (the other option is 40Mhz)
Fragmentation Threshold: 2346
RTS Threshold: 2347
DTIM Interval: 1
Beacon Interval: 100
Transmit Power: 100%
Wi-Fi Multimedia: Disabled
Any ideas would be greatly apprecatied...

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

HP 7510 Photosmart - Lost WiFi Connectivity with Windows 7 laptop

Have had the 7510 for over a year and have configured/used it with the same Toshiba Windows 7 Home Premium 64-bit laptop which is our home PC. Two days ago, tried to print over the WLAN and an error message said the 7510 was offline. Power cycled/reset, et...nothing. I have a work PC (also Windows 7) that can wireless access the 7510 without issue.
So, I uninstalled and reinstalled the 7510 drivers. During the set-up, states that the printer IP is on a different network than the computer. This is not true...both are connected the same SSID. I can even access the EWS using the printer IP (192.168.1.3) that I got from the Network Configuration Printout. This printout validates the network status, network SSID, IP, etc are all good.
I did an IP release/renew on the Toshiba, no change.
I did tether the printer to the computer via USB to at least complete the driver install. When I tried the HP Utility to 'convert the printer from USB to wireless, I get the message stating the Printer and Computer are not on the same router. However, have verifed that they are on the same router.
What else can I try? This appears to be an IP conflict with my home Toshiba laptop. If my work PC has no issues with accessing the 7510 and I can get to the EWS from both PCs, so I wouldn't think the Netgear WGR614 router is the issue.
Help!

Hi teeroy33,
I can't help but wonder if there is a firewall on the Toshiba that is blocking the communication. Let's use the HP Print and Scan Doctor. The following are some common problems that the Print and Scan Doctor can resolve easily:
' Printer is Offline ' or print jobs stuck in the print queue
Missing or corrupt drivers
Connectivity issues
Firewall issues
Please click here to open the link, download and run the HP Print and Scan Doctor.
Let me know the out come so that I can continue to work with you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Sudden slow wifi connection with Airport Express 802.11n

Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
Thanks

willcyrier wrote:
Do I have to change anything on my computers?
you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
good luck !

My 2007 mac pro has a slow internet connection with lion

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

How can i fix my wifi connection with my router

how can i fix my wifi connection with my router?

I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA.
I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad. I'm unable to use the trackpad(bluetooth) and wifi at the same time. If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine. This configuration was working fine prior to upgrading to Yosemite.
I experienced the same problem at home and at the office.
Additional test:
I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA. The wifi disconnected as soon as I paired the headphones with the MBA.
I have had no problems with the MBA's keyboard or integrated trackpad.
Rick

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Slow wifi connection with windows 8

Similar Messages

Maybe you are looking for