Slow wireless connection 802.11n AEBS and Intel Core 2 Duo MacBook Pro

I have three Macs all currently connected wirelessly to the new 802.11n AEBS.
Mac #1 - PowerMac G5
Mac #2 - 17" MacBook Pro Intel Core Duo
Mac #3 - 15" MacBook Pro Intel Core 2 Duo
The wireless connection speed (when using the web browser) is fine for both Mac #1 and Mac #2 but noticable slower for Mac #3. All three Macs are sitting right next to each other. All three Mac are getting an excellent signal. All three Macs are running the same version of the OS. All three Macs have identical network setting (as far as I can tell).
When connecting Mac #3 to the AEBS via an ethernet cable, performance is good. I've also tried configuring the channel manually in the AEBS to channel #1 but this did not help (seemed to help others in a different thread). Additionally, I ran the 802.11n enabler and performance was bad both before and after its installation.
Any idea why the Intel Core 2 Duo MacBook Pro would be performing differently?

Ok eveyone. I did some digging and was able to get the network speed back with my Core2Duo machine. I put the Airport Extreme into Bridged mode and connected the Ethernet cable to one of the LAN ports, not the WAN port. After that everything works great. for more information check out this lengthy thread...
http://discussions.apple.com/thread.jspa?messageID=3989864&#3989864
and this site mentioned...
http://www.macintouch.com/reviews/airportn/#performance
Apparently the new base stations have a few issues that need to be worked out so I'd consider this a workaround. There should be no reason to have to do this. Good luck.

Similar Messages

  • Is there an E-SATA connect on my 2.16  Intel Core Duo MacBook Pro?

    MacBook Pro 2.16 Intel Core Duo 15"
    I've suddenly got to work with an E-SATA setup. I'm using the USB port right now ... but have been told the E-SATA would run smoother, faster. ??? This is to edit a film on the fly. I've been given the data on a naked drive plugged into a black box that gives me either USB or E-SATA.
    All ears,
    Ben

    Any SATA 3.5" drive will connect to you PowerMac G5 or Mac Pro.
    SATA 2.5" drives either need a PCI-SATA card or a Firewire SATA case to connect to a PowerMac G5 or Mac Pro.
    Mind you a drive formatted on a MacBook Pro will not boot a PowerMac G5, but might boot some Mac Pros if the Mac Pro is able to run the said operating system. See this article on which operating systems each Mac can run:
    http://docs.info.apple.com/article.html?artnum=25517
    Usually though, moving drives from one machine to the next simply makes user data transfer quicker, and is not a way to migrate applications or operating systems. This can get real sticky going between PowerPC and Intel Macs as this migration tip explains:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

  • Airport extreme 802.11n card for 2 Gh intel core duo MacBook pro

    can I upgrade my 2 Gh core duo MacBook's airport card to work with the new airport extreme?
    802.11n base station. I could not find any info on the apple site.
    thnks

    This has been discussed ad nauseam in the MacBook Pro forum, Internet, and Networking the MacBook Pro. Please check there.
    http://discussions.apple.com/forum.jspa?forumID=1153

  • Is installation on 2.16 GHz Intel Core Duo (MacBook Pro)really not possible and why?

    I would like to buy OS X Lion and install it on my MacBook Pro with 2.16 GHz Intel Core Duo, but this processor is not in the list of the specifications (Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7 or Xeon processor).
    Is it really true that I can't install Lion on my Mac? If so, what is the reason?

    It has to be a Core 2 Duo. Those are the requirements for Lion.
    Requires a newer Mac.
    Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.

  • ARD Admin and Intel Core Duo MacBook

    I just received my new Macbook and used the Migration to transfer everything from my old 14" iBook. When finished, everything so far appears to be working fine except my ARD Admin. When first launching the app, I had to reenter the serial number. Now I get a message each time I launch the app stating that "The Remote Desktop Administrator software is out-of-date." I am instructed to go to software update and check for new software. That process results in word that my software IS up to date. I have tried doing a reinstall of the ARD software, with no help. What all do I need to remove in order to remove all the old software to do a new install? My boss is using the same software version on his MacBook Pro without problems. We are running ARD Version 2.2.
    Also, I have some saved tasks on my laptop ARD that I would like to set up on my desktop G4. Is there an easy way to complete this process?
    Thanks

    I know that ARD likes the client to be as new as the Administrator software. I wonder if it doesn't like that your administrator is 2.2 and your client is more than likely 3.0 or higher being a new machine?
    Is the client enabled on your laptop? If it is, try turning it off, then restart and start the admin software.

  • Can I upgrade to Lion on my 2 GZ Intel Core Duo MacBook Pro?

    I am running Snow Leopard on my MacBook Pro and cant seem to figure out how to upgrade to Lion.  Mountain Lion is not compatible with this machine, but maybe Lion is?  How to do this?

    You need 2 GB RAM at least, but 4 GB is a better working amount.  You can buy more RAM at macsales.com and crucial.com for proces you will like, and can find instructions for replacing it.
    Read this for application that do not work under Lion:  http://roaringapps.com/apps:table
    Make a *very* good backup before upgrading.  I suggest a clone with CarbonCopyClone ($40 download).  This will make a "bootable" backup that can be used to reload SL in case of failure during upgrade.
    There is also SuperDuper, but at last report it does not clone the "Recovery Partition" of Lion that CCC will backup.  Buying a clone package that work with Lion for future backups is a good idea.
    You can call 1-800-676-2775 to buy a download code to use in MacAppStore.
    But read the compatibility list first to see if you will lose apps.  If you do, you can always keep an external disk with SL on it OR load Lion on a separate partition in your internal drive and choose which one to boot.

  • 2ghz intel core duo macbook pro 15 power adapter

    What is the model number for the correct power adapter for this laptop?
    Which models will work? There are 60w and 85w.

    The 85 W model is for 15" MBPs. Either of the two listed on Apple's Online Store will work.

  • I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the laptop to lock up

    I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the computer to lock up. The drive seems to sleep and then never wakes and the laptop locks up. I've had this drive connected to an older 2.0 core duo macbook pro and a 3.0GHz quad core macpro with no issues. It's a ministack v3 drive, 2GBs, fw400+800, sata and usb. Any ideas? And can I stop the drive from going to sleep?
    Thanks.

    Check with the drive's manufacturer to see if they might have a firmware update for the enclosure; it sounds like the enclosure's firmware isn't properly detecting the FireWire wakeup sequence.
    Obviously this could also be a bug with the new MBP's firmware, so it wouldn't hurt to ask the Genius Bar at your local Apple Store; in particular, ask them to show you that the sleep/wakeup sequence on your MBP works with some other FireWire drive.

  • I have a 2.2 GHz Intel Core i7 macbook pro that has lion installed when I recieved it, according to the support pages AHT is supposed to work over the internet if it wasn't installed, Mine wasn't and it doesn't work. Where can I download it from?

    I Have a 2.2 GHz Intel Core i7 macbook pro, I recieved it with OSx 7.2 lion installed, I need to us AHT (apple hardware test) according to the support page that I copy here
    Additional Information
    Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
    For Intel-based Apple computers that shipped with Mac OS X v10.5.4  or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1  and should be included with your computer.
    For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install  Disc 2 and should be included with your computer.
    For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead.
    This doesn't work as the additional information statement says it should above.  Could someone at apple give me an idea of where to get it or what the "REAL" solution is, since it doesn't work on an internet version which was confirmed today at the Genius Bar in the Apple store.
    Please help me

    chrisfrommarion wrote:
    Thanks, while it worked on yours it doesn't work on mine, any other ideas?
    Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
    And how long did you hold it down?
    I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
    If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

  • 2 ghz intel core i7 macbook pro 10.7.2 and itunes 10.5.1

    Hello,
    I have a 2 ghz intel core i7 macbook pro using 10.7.2 and and I recently updated to the current version of itunes.  Opening itunes, causes the entire machine to lock up.  There is another thread that I was able to find describing similiar issues with the Macbook Air but I didn't see anything about the i7 macbooks.  Is anyone else experiencing this or know of a work around?
    Thanks.
    I just wanted to update this.
    There were apparently multiple firmware updates that were available (or a new one was posted since yesterday afternoon).  Installing this one (4.2?) returned everything to normal.

    It has to be a Core 2 Duo. Those are the requirements for Lion.
    Requires a newer Mac.
    Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Is Protools 8.0 compatible with OSX 10.6.8 on my 2.2 GHz Intel Core i7 Macbook Pro?

    Is Protools 8.0 compatible with OSX 10.6.8 on my 2.2 GHz Intel Core i7 Macbook Pro?  I installled it, it starts to launch, and then always unexpectedly quits. 

    It would be best if you contacted ProTools technical support or their web based forums/support.
    Good luck,
    x

  • Intel Core Duo MacBook 802.11n

    I have a MacBook with Core duo. It can not recieve 802.11n, but I have seen a few different options for upgrading. One of those includes buying a Mac Pro Wireless Kit from apple and installing the card into the MacBook. I found this on the HardMac site. I have talked to almost everyone, but no one can give me a consistent answer. I know if I install the card myself the warranty will be voided no matter what, but if I have an authorized Mac Tech installs it for me will it void the warranty? The other thing is that if an authorized Mac Tech installs most things it will not void the warranty, but my only questionm is, if the Mac Pro card will fit into the MacBook and work while not voiding the warranty?

    Hi haysman
    From what I see you will not void your warranty if your macbook being repair by authorized service center and broken part has been replaced with similar one (within apple specs), not with modified one.
    So altered the macbook specs might void your warranty.
    To make it clear, consult your apple store, and your authorized technician, and asked your technician that can he or she guarantee that the warranty still good after they di that procedure.
    And Core duo macbook age is almost a year old now, and if you don't have apple care, then you just wait couple more weeks and you can operate yours without worry about warranty.
    I also seen one site that provide the kit and installation is also included, I'll post it later if I can come accross.
    Good Luck.

  • Upgrading to a 802.11n Airport Express Card in my Macbook Pro

    I found this question on the forums answered over 4 years ago and thought to ask it to get a more current response given that both hardware and sellers have changed significantly in the time passed.
    I've also found it difficult to replace the wireless card in my Macbook Pro.  I was able to track down the current part number in my device as being 661-3890; but I figure it may be better just to upgrade to an 802.11n compatible card.  I've found a few listings on ebay but they are not straight forward.  I want to make sure that anything I might buy is at least compatible with my computer.
    A creditable site, OWC, has a part number 661-5048 they sell that is compatible but is on the upper end of the price spectrum.  I have the A1150 Macbook Pro (1,1) which I believe is also referred to as the late 2006/early 2007 model.  In my research I was able to deduce that some people have had success replacing their cards with the Atheros AR5BXB6 card although there appears to be some debate regarding the different Manufacture Part numbers (482261-001 and 482261-002).  There are a few of these listed on auctions (used and new) but the range in price is $100.
    I'm new to the Mac screen and would appreciate any help in the right direction as I have yet to find an authority that confidently and clearly states what cards are compatible with my box.  Thanks!

    Here is the ifixit link:
    www.ifixit.com/MacBook-Parts/MacBook-802-11n-Airport-Extreme-Card/IF185-038
    I just want to know what cards are compatiable so I can pick up a reasonblily priced one on ebay.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro1,1
      Processor Name:          Intel Core Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MBP11.0055.B08
      SMC Version (system):          1.2f10
      Sudden Motion Sensor:
      State:          Enabled
      Software Versions:
      Menu Extra:          6.2.1 (621.1)
      configd plug-in:          6.2.4 (624.2)
      System Profiler:          6.0 (600.9)
      Network Preference:          6.2.1 (621.1)
      AirPort Utility:          5.5.2 (552.11)
      IO80211 Family:          3.1.4 (314.1.1)
      Interfaces:
    en1:
      Card Type:          AirPort Extreme  (0x168C, 0x86)
      Firmware Version:          Atheros 5424: 2.1.14.5
      Locale:          FCC
      Country Code:
      Supported PHY Modes:          802.11 a/b/g
      Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165

  • Firefox runs as a PowerPC kind on an Intel Core Duo MacBook

    Hi All,
    For some reason, my Firefox 3.6.9 runs as a PowerPC kind (confirmed by looking at the Activity Monitor) on an Intel Core Duo Mac Book. I guess that's what causes high CPU utilization and unexpected exits. How can I ask it to run as Intel image?
    TIA,
    Slava Imeshev

    I have Lion installed on a Mini with a C2D processor. The same Mini has Snow Leopard on another partition and there is no noticeable difference in operational speed between the two OS's. But compared to my new MBPro 17" with a 2.83GHz i7, the Mini running Lion is noticeably slower. So if you can afford anew MBPro, then I would get it because you will probably be unhappy with the performance of Lion on the older MBPro. The other benefit of getting a new MBPro with Lion is that if you have any Power PC applications currently on the old MBPro, which will not operate in Lion, then you still have the ability to use them. Many users got stung by upgrading to Lion, only to find they could no longer use the older PPC applications.

Maybe you are looking for

  • Epson NX515 cancelling operations after 10.5.8 Update

    I applied the latest 10.5.8 security update recently and now my Epson NX515 will not communicate with my laptop. I've reset the printing system and reinstalled the latest drivers several times. The laptop can see the printer when connected via WiFi a

  • Undefined error updating Adobe AIR on Windows Server 2008

    I am trying to upgrade from Adobe AIR version 2.7.1.1961 to version version 3.1.0.4880. The operating system is Windows Server 2008 Standard  - SP1 I am logged on as the administrator and shortly in the upgrade process, I receive a Window stating: So

  • Table for Transport request

    Hi all, We have requirement like based on the object name need to fiind the latest transport request number(which creted newly after the changes). please if any one have idea, in which table it is getting stored please help me. thanks in advance. tha

  • How to keep the fan noise down?

    I use my 2010 macbook pro to make music every day. I spend a lot of time in a small room with it and the fans go crazy as soon as i do anything slightly cpu intensive. The fans come on and are pretty loud, even with some ventilation under the laptop

  • PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

    Problem: I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2. When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I