Slowdown time between 2 keyframe

hello guys, how can i slowdown a movement between 2 keyframe?
if i want to move a square i create 2 keyframe and press f9 than i create anotherone just in the middle and press f9, it work but in the middle it stop for a frame... is there a way to just slow down instead of a stop for 1 frame?

a.) Select your keyframes and then press the graph editor button. From this view you can select each of your keyframes individually and move them around in time or up and down to control the velocity manually. The bezier handles around the keyframes also allow you to control the curve of the motion.
b.) Instead of simply pressing F9, which converts keyframes to "Easy Ease" (hourlgass-shaped keyframes), you might want to try right clicking on individual keyframes and playing with the other easing functions. Usually you want to "Ease Out" (left-pointing-arrow keyframes) of a motion as it starts and "Ease In" (righting pointing arrow keyframes) to a stop.
c.) You can also play with other auto easing functions such as "Linear" (diamond keyframes), "Hold" (square keyframes) and "Auto Bezier" (circle keyframes) using the buttons at the bottom of the graph editor window.
There are many more detailed tutorials on the internet. Here's one that I found with a quick youtube search:

Similar Messages

Dent/dip in motion graph between keyframes

I've noticed that ever since upgrading to AE7, I occasionally get this strange dip/dent in the line/curve between keyframes that I can't seem to get rid of.
Commonly, it occurs like this:
I set a keyframe at the first frame, then move the layer/item and set another keyframe at (say) frame 30. Everything's fine... Then I move to (say) frame 40, move the item, and set a keyframe. When I look at the graph, rather than the usual line going from one keyframe to the other, I have a kink/dent in the line going from keyframe 2 and 3, as if a keyframe of a different value was place in between the two keyframes.
I've tried toggling linear/bezier interpolation, and even removed and redid each of the keyframes, yet nothing gets rid of the kink.
Has anyone else experienced this, and does anyone know why this is happening? This has prevented me from finishing even simple animations, because there doesn't seem to be any way to fix it.
I never had this problem with previous versions, so I'm really puzzled by what is causing this. Just 3 keyframes, and it does it... nothing else complex or unusual.

I think what you're talking about is bounce or rebound. If you change the spatial interpolation from bezier or auto bezier to linear the bounce will go away. You can't change spatial interpolation directly in the timeline graph editor. You change it by going to Keyframe Interpolation by right clicking (or Control + click on a one button mouse mac) on your selected keyframes in the timeline window and picking Keyframe Interpolation or by using the keyboard shortcut Ctrl/Cmnd + Alt/Option + K, or by going to Animation>Keyframe Interpolation from the menu bar.
While the graph editor will give you an indication of the position of the layer, you can only manipulate the time values in the Timeline Window. In the Composition window, you can only adjust the spatial (position, rotation) property. If you look closely at the keyframes in the Composition window before you change spatial interpolation, you'll see bezier handles on the path. They are really difficult to see on a straight path, but they are there. Changing Spatial Interpolation to linear will get rid of these handles, but you can also do it manually by holding down the G key while hovering close to the motion path and when the cursor changes to an open arrow you grab the path bezier handle and drag it to the keyframe.
Hope this helps. It's a rather common problem that's easily solved once you realize that you're adjusting the when in the timeline and the where in the comp window.

Why does my image 'float around' between keyframes?

Why does my image 'float around' between keyframes when I'm transforming it? I want it to stay still for a period of time before I make it move again but it kinda floats around even though I didn't ask it to. Help! And thanks!

You have to set the keyframe interpolation to "linear".
Control-click on the little icons along the path in the viewer to make that change.

LabVIEW/SignalExpress: How can I automate measuring the time between two pulses?

Hi everyone, bit of a newbie here so please bear with me.
I'm a student at a university conducting a muon decay experiment with an oscilloscope connected to some photomultipliers. To summarize, if a muon enters the detector it will create a very small width pulse (a few ns). Within a period of 10µs it may decay, creating a second pulse. The oscilloscope triggers on the main pulse 5-15 times per second, and a decay event happens roughly 1-2 times per minute. I am trying to collect 10 hours of data (roughly 1500-2000 decay events) and measure the time it takes for each decay.
I've been able to set recording conditions in SignalExpress that starts recording on the first pulse and stops recording on the last. The Tektronix TDS 1012 oscilloscope however feeds 2500 points of data from this snapshot into a text file (for use in excel or other software). Even if I perfectly collected the data, I would have 100,000+ data points and it would be too much to handle. I don't know how (or if it's possible) to reduce the sample size.
To conclude, using Labview or SignalExpress, I would like to be able to have the software
1. Differentiate between the single pulse detections and double pulse decay events
2. Record only when two pulses appear on the oscilloscope
3. Measure the time between these two pulses and ONLY that to minimize the amount of data recorded.
Any help would be GREATLY appreciated, thanks!

Hi wdavis8,
I am not that familiar with Tektronix, but there should be a place in the dialog that you go through when you create the action step to acquire date to specify a sampling rate. That would allow you to reduce the number of data points you are seeing, but may reduce the quality of the data.
If it’s just a matter of that much data being hard to dig through when you have that many points, you could do some analysis on the data after the fact, and then create a new file with only the data you want to look at. For example, you could identify the peaks in the data, and based on the distance between them or the difference in magnitude, selectively write data to a new file.
Here is some information about peak detection in LabVIEW:
http://www.ni.com/white-paper/3770/en/
You could also do some downsampling on the data to get fewer data points:
https://decibel.ni.com/content/docs/DOC-23952
https://decibel.ni.com/content/docs/DOC-28976
Those are just a few quick ideas.
Kelsey J
Applications Engineer

CS5.5 - Go to previous or next visible item in time ruler (keyframe, marker, work area beginning or

The
Go to previous or next visible item in time ruler (keyframe, marker, work area beginning or end)
J & K
Does not work at all here.
Perhaps I am misunderstanding the nature of this feature but from reading the text in the manual I would come to expect
that hitting i.e. J&K - would go the next visible item in the ruler be that a Keyframe or Marker etc... However, when I hit K timeline takes me to the end of the composition and J to the beginning. And I have a lot of markers set.
Any Ideas
Thanks

It works on layer markers and keyframes, but not comp markers. Furthermore, it will also not work, if index items have been scrolled out of view or are shy even if the property streams and their keyframes are otherwise visible. This has never been any different, but it's quite annoying.
Mylenium

"logon time" between USR41 and security audit log

Dear colleagues,
I got a following question from customer for security audit reason.
> 'Logon date' and 'Logon time' values stored in table USR41 are exactly same as
> logon history of Security Audit Log(Tr-cd:SM20)?
Table:USR41 saves 'logon date' and 'logon time' when user logs on to SAP System from SAP GUI.
And the Security Audit Log(Tr-cd:SM20) can save user's logon history;
at the time when user logged on, the security audit log is recorded .
I tried to check SAP GUI logon program:SAPMSYST several ways, however,
I could not check it because the program is protected even for read access.
I want to know about specification of "logon time" between USR41 and security audit log,
or about how to look into the program:SAPMSYST and debug it.
Thank you.
Best Regards.

Hi,
If you configure Security Audit you can achieve your goals...
1-Audit the employees how access the screens, tables, data...etc
Answer : Option 1 & 3
2-Audit all changes by all users to the data
Answer : Option 1 & 3
3-Keep the data up to one month
Answer: No such settings, but you can define maximum log size.
4-Log retention period can be defined.
Answer: No !.. but you can define maximum log size.
SM19/SM20 Options:
1-Dialog logon
You can check how many users logged in and at what time
2-RFC login/call
Same as above you can check RFC logins
3-Transaction/report start
You can see which report or transaction are executed and at what time
(It will help you to analyise unauthorized data change. Transactions/report can give you an idea, what data has been changed. So you can see who changed the data)
4-User master change
(You can see user master changes log with this option)
5-System/Other events
(System error can be logged using this option)
Hope, it clear the things...
Regards.
Rajesh Narkhede

How to keep waiting time between processed messages !!

Hi Folks,
I have got one scenario required waiting time between processed messages. The problem as follows !!
File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
Please I am expecting positive answer !!
Many Thanks in Advance
San

Hi Rudolf Yaskorski ,
Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
Kind Regards
San

When using historical datalogging, is it possible to hide the elapsed time between tag updates when viewing on a graph?

When my process stops, I am reading an array of tags(datapoints) and writing the max and average to memory tags for data logging. However, when viewing the data, the elapsed time between cycles spreads the data out unevenly. It could be 90 seconds between cycles or maybe two hours or longer. Is there a way to convert the time axis data to be just consecutive datapoints?? It would be like logging data based on a particular condition happening rather than time-based trending. Should I try to use the data set logger examples instead?? I would prefer to use the built-in datalogging features rather than writing to databases.

You could export your data to a spreadsheet file and then actually write then again in a second database using this example program in the devzone
http://zone.ni.com/devzone/conceptd.nsf/webmain/5A921A403438390F86256B9700809A53?opendocument
Using this program (if you don't want to modify it, which would take a reasonable amount of time specially if you are not familiar with VI-Based Server) You would have to generate a collum in your spreadsheet file to be the timestamp, it would be a artificial timestamp.
What you could do in your application is to first save the data to file and then read from file, substitute the collum timestamp for the "artificial one" and then write it to the database, again, with that you would not need to modify this program.
However if you have the time and is willing to work with VI-based server you could try to modify the example program to be adapted for your purposes.
I hope it helps
Good Luck
Andre Oliveira
Applications Engineer
National Instruments

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

Well if you got the Phone Pggray43 at a Local Corporate store in your Area) you should be able to return it as long as you have all the contents.! Phone, Charger and any other accessories that came with it the Box of Course.. As long as you have not went past the 14 Day return.. the store can go over what you used as in Air Time and Data..
Now if you've went past the 14 Day return you be Liable to pay a E.T.F = Early Termination Fee the fee for this is around $300 so hopefully you have not went past the 14 Day return window the Manager if Available is the one I would talk to tell them your on Social Security and you just can't afford a phone as this I'm sure they'll work with you to get something solved..
Hope ya have Good Luck.! b33

I want to measure te time between the peaks

I need to measure the time between each peaks (QRS peak) in an ECG waveform continuously and plot on the chart.
Can u please help me with this.

Hello kok,
Here is an example. I am using a sine wave instead but it will still work. Just put in the threshold to be above the itnermediate peaks that you want to ignore but below the peaks you want to get. The VI will then tell you what location inside of the array the peak occured. You can subtract each location from each other to find how many elements pass between peaks. You can then multiply the number of elements between peaks by the amount of time between each sample. I hope this helps.
Steven T.
Attachments:
rrmeter.vi ‏16 KB

HT204380 can you face time between 2 devices which are registered to the same email address

can i use face time between my iphone 4s and my sons ipod touch 4th gen eventhough they are both registered to the same apple account and same email address?

Yes you can. You just need a unique e-mail address on the iPod to call. I can FaceTime from my phone to my iPad since we have my wife's e-mail as the FaceTime contact.

Time between digital inputs?

Hi, I would like to measure the time between a digital input being true.
Basically I have a prox picking put a point on a rotating shaft (to determine RPMs).
What I want to do is measure the time between consecutive input signals from the prox, divide 1 rev by the time, multiply this by 60 to get RPMs. Then compare that value to a set value ( say 300 RPM ). If it is equal or great, contine onto the rest of the program, if it is less than the set value, keep looping until it is greater than or equal to the set value.
Thanks in advance for the help!
Ryan
LV 7.1

If you need to measure accurately the rotation speed on a single turn, software timing may not be accurate enough, since the Window internal clock readings have lags (read "errors") of more than 10 ms (= 100 rps, about 2 rpm error), even when no other application is running. So either you count (and wait) for a given number of rotations, and calculate an average, or you use hardware timing with a counter on the DAQ card (if any)...
Otherwise, if you only need an estimate of the rotation speed, you can read the digital line and wait for 2 consecutive changes. The period can be calculated from the time stamps. See the attached vi. Wait a few seconds to observe the variations generated by Windows.
Merry Christmas, and Happy Wiring !
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Rotation speed.zip ‏14 KB

ITunes playback has inconsistent gap time between songs

When I burn a store bought CD into iTunes and then play the CD in iTunes, the gap time between the songs is sometimes inconsistent. There's a pause between some songs but others run into each other. What causes this? Can it be prevented? Thanks.

Hi Laura:
Welcome to discussions!
One workaround is to make a slideshow soundtrack by making a single long track of music from purchased or regular music:
1) Burn your desired playlist to CD in iTunes.
2) Make sure you have itunes Preferences set to "just open the CD and not automatically play or import the songs."
3) Insert the burned CD and iTunes will open.
4) Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
5) Go to Advanced>convert selection to AAC.
6) When done, make a new playlist named after the slideshow.
7) Put the new combined track into the playlist.
8) In iPhoto, select this playlist for your slideshow.
You can also Share/Export the slideshow to Full Quality DV; import the resulting Quicktime movie into iMovie and add the music there (or do the whole slideshow in iMovie). If you have Quicktime Pro, you can Share/Export the slideshow (like above), but then open the resulting Quicktime movie in QTPro, and copy/paste your music from within Quicktime.
Sue
Thanks to John Keller for typing all of that out!

Data load taking very long time between cube to cube

Hi
In our system the data loading is taking very long time between cube to cube using DTP in BI7.0,
the maximum time consumption is happening at start of extraction step only, can anybody help in decreasing the start of extraction timing please
Thanks
Kiran

Kindly little bit Elaborate your issue, Like how is mapping between two cubes, Is it One to one mapping or any Routine is there in Transformation. Any Filter/ Routine in DTP. Also before loading data to Cube did you deleted Inedxes?
Regards,
Sushant

How to use "Days to keep historical data" & "Maximum time between logs(hh:mm:ss)

Iam using LabVIEW DSC. Values are being logged continously into citadel.
Is it possible to retain data of just one month and delete the earlier data as fresh data is being logged into citadel?
Is it possible to achieve this feature with "Days to keep historical data" & "Maximum time between logs(hh:mm:ss)" options in the history menu of Tag configuration editor ?

Yes, Days to keep historical data does what you are looking for. After the specified number of days, the old data gets overwritten with new data. So, you always have only the specified number of days' of data in Citadel.
Note: You may sometimes see that old data doesn't get overwritten till after a day or so of your setting (depending on how much data is being logged). This is because Citadel logs in "pages" and waits till the current page it's logging to is full before it starts overwriting the old ones.
You do not have to use the 'Max time between logs' option for this. This option forces Citadel to log data every so-many hh:mm:ss regardless of whether or not the data has changed. Note that this is NOT a way to "log data on
demand". Because, this periodic logging of data would change for a particular tag when its data changes. So, even with this setting all data may not get logged at one shot. Anyways, as I said, you do not have to use this setting for what you're trying to do.
Regards,
Khalid

Slowdown time between 2 keyframe

Similar Messages

Maybe you are looking for