Slower speeds wirelessly?

So I was at 15/5, and all my wireless devices were getting 15/5 no problem... but now I signed up for 50/25, I still can not get past 15/5... but when Wired I get the full 50/25. What do I need to do to take advantage of the 50/25 speeds wirelessly...?

A duplex mismatch on the ethernet or switch interface would account for it and it's a common problem.

Similar Messages

  • Slow speeds, almost dead, can't figure out what's ...

    Hi all, I've had very slow speeds from my homehub for almost a week. I've tried a factory reset on the hub to no avail. I also spoke to technical support in India I think, but they were no help.
    When I perform a speed check the speed from the exchange to my house is fine, it's after that it dies a death.
    I've checked all cables and it is not cabling after the hub as this problem effects internet tv's that are connected via ethernet cable and others that are wireless and also tablets that work on wifi.
    In the last week I have had download speeds as low as 0.03 and for only a few hours last Monday has it been OK all of a sudden. I presumed a fix elsewhere but the problem came back an hour or two later.
    At the moment we can't use iplayer, youtube and every webpage takes ages to load. It's quite horrible. 
    Has anyone got any idea's what could be wrong and are there any diagnostic tests I can run on the hub to see if it's borked.

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Extremely slow speeds on Windows Computers with 5th Generation AirPort Extreme

    I just got a new refurbished AirPort Extreme 5th generation. Everything works great for all of my OS X devices and iOS Devices. I am getting my ISPs speeds when doing tests. The issue is when I am using Windows devices. My roommate has a desktop and a netbook and both are getting extremely slow speeds. Speeds like .07Mbps down. Does anyone have any idea what the issue might be?

    You have no large file?? Really.. in the whole computer there is not a windows update file.. a backup file... a movie download file.. nothing.. ??
    Anyway that is irrelevant.. the issue is wireless.
    Download the latest drivers from the wireless manufacturer.
    You will need to find out what wireless card is used and locate the correct download for that model.
    On the Airport it is well worth doing the following tests.
    1. Change the name to SMB standard.. short no spaces pure alphanumeric.
    So if your wireless name is Fred Blog's Airport Extreme wireless
    Plesae change it to AEwifi
    2. Take off all security for a test.
    3. Set channels.. I am guessing the computers are only using 2.4ghz, so set 11,6, 1 in that order.
    No improvement.. just put the security back to WPA2 Personal with pure alphanumeric password..
    Try and test new drivers and use no firewalls on the computer.. ensure that the computer is correctly set for home network.
    Beyond that it is just incompatible.

  • My MacBook Pro is running slowly. I run Mountain Lion on it.  I received the following report from Etrecheck.  Can someone help me decipher it and provide me with steps to fix the slow speed?

    My MacBook Pro is running slowly. I run Mountain Lion on it.  I received the following report from Etrecheck.  Can someone help me decipher it and provide me with steps to fix the slow speed?
    Problem description:
    slow computer
    EtreCheck version: 2.0.11 (98)
    Report generated November 15, 2014 2:57:16 PM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,1
      1 2.3 GHz Intel Core i7 CPU: 4-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 - VRAM: 384 MB
      NVIDIA GeForce GT 650M - VRAM: 512 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (25.67 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Rowmote Helper.app
      [loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
      /System/Library/Extensions
      [not loaded] com.smarttech.iokit.SMARTBoard (11) Support
      [not loaded] com.tectona.driver.PL2303 (1.3.0) Support
      [loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.accountsd.plist
      [failed] com.apple.AirPlayUIAgent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.lookupd.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.coresymbolicationd.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.smarttech.boardservice.plist Support
      [running] com.smarttech.floatingtools.plist Support
      [running] com.smarttech.ink.plist Support
      [running] com.smarttech.SBWDKService.plist Support
      [running] com.smarttech.smartnotification.plist Support
      [running] com.smarttech.systemtrayicon.plist Support
      [running] com.webroot.WRMacApp.plist Support
      [running] com.webroot.WRMacBackNSync.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [running] com.regularrateandrhythm.rowmotehelperaide.plist Support
      [running] com.webroot.security.mac.plist Support
      [running] com.webroot.webfilter.mac.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Garmin Express Service UNKNOWN (missing value)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      Spotify Application (/Applications/Spotify.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Rowmote Helper Application (/Applications/Rowmote Helper.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      npwebroot: Version: 2.0.15 Support
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.1
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
      Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 51 Check version
    Safari Extensions: ℹ️
      Password Manager
      webfilter
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      SMART Board  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          3% WindowServer
          2% iPhoto
          2% mds
          2% mdworker
          1% Google Chrome
    Top Processes by Memory: ℹ️
      382 MB Mail
      275 MB WebProcess
      107 MB Google Chrome
      103 MB WindowServer
      99 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      270 MB Free RAM
      1.50 GB Active RAM
      1.30 GB Inactive RAM
      1.22 GB Wired RAM
      20.97 GB Page-ins
      8.64 GB Page-outs

    Hi Linc
    I hope this is what you were after.  Looking forward to hearing your feedback.
    Thanks, Susanna.
    11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
      "query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
      "query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
      "query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
      "query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
    11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
    11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
    11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
    11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
    11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
    11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
    11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
    11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
    11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
    11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
    11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
    11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
    11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
    11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
    11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
    11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
    11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
    11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
    11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
    11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
    11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
    11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
    11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
    11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
    11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
    11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
    11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
    11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
    11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
    11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
    11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
    11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m

  • MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)

    Hi All,
    I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine.
    this is my ertecheck report
    EtreCheck version: 2.1.8 (121)
    Report generated 1 April 2015 12:03:11 am IST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.7 GHz Intel Core i7 CPU: 2-core
        10 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Replace Soon - Cycle count 1329
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 4:1:57
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            MacHDD_2 (disk0s4) /Volumes/MacHDD_2 : 349.63 GB (118.65 GB free)
            MacHDD_1 (disk1) / : 149.11 GB (104.40 GB free)
                Core Storage: disk0s2 149.48 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Daemons: ℹ️
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacHDD_1: Disk size: 149.11 GB Disk used: 44.71 GB
        Destinations:
            MacHDD_2 [Local]
            Total size: 349.63 GB
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Adequate
                Backup size 349.63 GB > (Disk used 44.71 GB X 3)
    Top Processes by CPU: ℹ️
            26%    Microsoft Outlook
            12%    coreaudiod
             6%    Google Chrome
             3%    WindowServer
             1%    launchservicesd
    Top Processes by Memory: ℹ️
        215 MB    mds_stores
        193 MB    Google Chrome
        183 MB    Google Chrome Helper
        129 MB    iTunes
        107 MB    Microsoft Outlook
    Virtual Memory Information: ℹ️
        5.04 GB    Free RAM
        3.41 GB    Active RAM
        698 MB    Inactive RAM
        1.59 GB    Wired RAM
        4.71 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 07:59:25 PM    Self test - passed

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • How I fixed my slow speeds

    This may not work for everyone, but I have been experiencing some slow speeds both wired and wireless in my office. I fixed it by doing the following:
    1. Open up a windows pc to the command prompt (start -> run -> cmd )and type: ipconfig -all
    2. Make a note of your DNS servers.
    3. Go to the "Network" section of your system preferences. Under TCP / IP, add in those DNS servers on the Mac.
    This fixed some of my problems!
    Good Luck!
    Colin

    this one is a known fix. this works for me and for the customers i support. but if you are running wireless, you may want to access the channel, popwer and mtu settings of your wireless router

  • Ibook g4 really slow on wireless - is it my 10.3.9???

    internet is fine when i am cabled and really slow when wireless. someone suggested upgrading to 10.4 - but i tried loading 10.4.11 and i got an error msg that it cant run on my machine.
    anyone got a solution i am lost ! thx

    Are you sure you have an extreme card. Extreme is 802.11n, which is faster than 802.11g. I'm not sure your OS supports 802.11n. Not sure how you check. Did you add the internal wireless card or did it come with your Mac?
    Tiger will run on you Mac, but I don't think it will change your speed.
    Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but is still available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A and M9639Z/A . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray).
    Also check this web store http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521
    Possible Alternative - OS X Tiger 10.4 Upgrade DVD $74.95
    http://www.yourmacstore.com/shop/shopexd.asp?id=376&bc=no
     Cheers, Tom

  • Slow Speed Tests

    Hay everyone I have an AirPort extreeme located in my front room about 15 feet from my bedroom. In the bedroom I have an iMac 27" mid-2011 model. I have been running speed tests from speedtest.net and have been getting very slow download rates, any where betwee 1.4 and 5.0 mbps. I pay for a 25 mbps speed. I have full signal strength everywhere in the house the speed is just terrible. Does anyone know how I can increses the speed of that computer. I have changed the channel to one that is not used as much in my area, as I looked at iStumbler. Also if I sit in the room next to the router I get 10 - 15 mbps. Any help would be amazing. Thanks.
    PS I also have an AirPort express set to extend the network in the bedroom where I am having the slow speed.

    I'm not able to provide a solution though I too find that the AE is not as fast as it is supposed to be. At one time I had a Belkin Wireless and an ADSL connection that topped out at 1.5MB/sec. Now I have a 50MB/sec internet connection and honestly, I have seen an increase in my speed over wireless but the Belkin really seemed quite zippy! I play World of Warcraft and I remember someone saying to me that AE or our Macs have Firewalls set-up that we don't know about or "something" that limits the speeds of the connections - which PCs and non-Apple products do not. Constantly see when downloading new patches from WOW, messages that I am behind a firewall - when I do not have firewall set on the AE nor on my Mac...

  • Slow connection & wireless question...

    I am having a problem with slow speed of surfing on DSL. I'm not sure if I have the cables connected correctly because I recently moved and it was all box up.
    Also, do I need a separate router (Netgear) to get wireless for other computers in the home?
    Thanks, Cari

    Issue part a
    calyma wrote:
    I am having a problem with slow speed of surfing on DSL. I'm not sure if I have the cables connected correctly because I recently moved and it was all box up.
    Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up.  It might shown up as the final hop (bottom-most line of the trace)  might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
    For example this what I see
        news.giganews.com
        traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
        1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
        2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
        3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
        4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
        5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
        6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
    Step two: Can you provide the Transceiver Statistics from your modem?
    #3 If you don't know how to get that info:
    a) What is the brand and model of your modem?
    b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
    #4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
    Issue part b
    calyma wrote:
     Also, do I need a separate router (Netgear) to get wireless for other computers in the home?
    Can not answer yet, because: You did not post what equipment you have as your modem and if you have a separate router, which one.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Very slow speeds and ridiculous email and bill for...

    Hi 
    i have several issues. I have been a very satisfied customer for over 15 years until early summer of this year:
    1. My broadband speeds remain painfully slow despite 3 complaints and investigations. In fact my line is still connected to the test line as I was advised to do and I have never had a call back as promised.
    2. I have now received an email message to say I have used 90gb at a cost of £50. This is almost all uploads. i upload nothing and this figure is impossible. Until June my usage was quite small and I came nowhere near my limit on option 2. Nothing has changed with my usage since then. I do not download or stream films and do not upload large quantities. I probably would stream films, but the slow speed does not allow it.
    3. I spent over an hour on the phone trying to sort this out today, but was not helped by a succession of people who barely understood the situation and had even less understanding of customer service. I have now emailed, but have had a message saying it might be 72 hours before a reply.
    Any advice would be really helpful as I am at my wits end
    Solved!
    Go to Solution.

    Ok....since the original post the problem has continued. I have spent literally hours on the phone to people who say all the same things and never come up with a solution.
    The test results are below. I do not experience speeds as reported. And if I use another tester it correctly comes out as about 1 4 - 1.9. or even lower. The upload usage is still showing as high....but it is just not possible. I have now reset the hub wireless key, but I have not shared this with anyone in range. Apple TV is now disconnected after it was going to take 20 hours to download a film!
    I am at my wits end with this and really do not want the hassle of changing provider but even after 20 years BT broadband I am so very close to that.
    Any ideas would be appreciated.
    Thanks
    Julie
    Home Hub 3
    iMac
    Set up not changed in 5 years. other than new hub about 6 months ago.
    Wired connection to main mac, but also wireless to other devices.
    The BT tester shows 6.09 mbps
     Download speedachieved during the test was - 6.09 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 7.15 Mbps
    ADSL Line Status
    Connection information
    Top of Form
    Line state:
    Connected
    Connection time:
    0 day, 17:53:05
    Downstream:
    8,128 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    14.4 dB / 23.0 dB
    Line attenuation (Down/Up):
    6.5 dB / 5.0 dB
    Output power (Down/Up):
    15.8 dBm / 11.9 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    0 / 0

  • E1200 - Had a weak signal and slow speed

    Pros: Price, nice sleek shiny box, kind of worked when new. Good as a paperweight in a light breeze.
    Cons: Not really a good doorstop - too light. Died at 35 days of ownership. Won't let me in to the web interface to make some changes. When working it had a weak signal and slow speed. Doesn't support access point mode like my old wireless router did.
    Other Thoughts: Not the first time I'm had problems with Linksys/Cisco branded products but this is the last product I'll ever buy with the Linksys/Cisco name on it. Fact is ever since Cisco bought out Linksys, every product I've bought from them had failed/died within a few months. You'd think they would get this right by now but they haven't.

    There are many reasons why you experience poor signal or connection. Well, there are few things you should keep in mind with regards to N routers:
    1) For the best possible speeds, you need to be using WPA2-AES as your security mode. Any other security mode will see your speed/range capped.
    2) Make sure the drivers for the Wireless Card for the computers should be updated as well..
    3) The router by default uses a channel setting of auto, which means that it would keep switching channels depending on the interference. I’d recommend you set it to a fixed channel. Usually, 1, 3, 6 and 9 give you the best performance depending on your environment of course. I’d suggest you try different channels, observing each for a while, to see which gives you the best performance. You can follow the link here on how to change channels.
    Second, all Linksys/Cisco can work as an Access Point. There are two (2) ways to cascade a Linksys router to another router:
    1. LAN to LAN – Connecting one of the Ethernet ports (LAN ports) of the Linksys router (router A) to one of the Ethernet ports (LAN ports) of another router (router B).
    This type of cascading requires the main and the secondary router to be on the same LAN IP segment to allow the computers and other devices to connect to both routers.  This configuration is recommended if you want to share files and resources within the network.
    2. LAN to WAN – Connecting one of the Ethernet ports (LAN ports) of router A to the Internet port (WAN port) of router B.
    This type of cascading requires the main router and the secondary router to have different IP addresses.  This connection makes it easier to identify which router the computers and other devices in the network are connected to since they will have different LAN IP segments.  However, computers that are connected to router A will not be able to communicate with router B, and vice versa since they are two different networks.
    Here is the link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...

  • SLOW speeds after sw update - Novatel 4G LTE router with voice

    My device auto-updated to sw 2.0 and ever since am getting 1-3 Mbps up/down. Prior to the sw update, I was getting "normal" LTE speeds ranging from 15-25 Mbps up/down.
    Verizon processed a replacement (was brand new, swapped in-store) with same experience. Speeds were normal but after a few minutes of being powered on, the router auto-updates to 2.0 and slow speeds thereafter.
    Phone front line has been nice but since this device is so new hoping posting here with get the attention of someone to correct this issue. Swapping for replacement devices isn't solving the problem.
    Anyone else? Ideas for a fix?

    Ok, I just followed JoeL and am awaiting approval. For reference, see the image of 3 speed tests this morning conducted on an LTE iPad. No other devices are connected to the router.
    connected to the wireless network broadcast by the Verizon 4G LTE router - 0.6 down/up, unacceptable
    connected straight to the Verizon LTE network - 34 down / 9 up, fine
    home wireless network
    The 1st test should look very similar to the 2nd since both are using the Verizon LTE network

  • Getting slower speeds if using Apple Time Capsule?...

    Hi. Have had Infinity2 for a couple of weeks and am happy with the sevice - much faster than my old Virgin cable. When the engineer came he installed the white modem box and connected it to a Home Hub 4. With Virgin I used the Superhub in "modem" mode and connected it to my Time Capsule which handled all the wireless stuff. I was planning on doing the same kind of thing with the BT connection as I was very happy with the Time Capsules wireless performance. The Time Capsule is around 3 years old so it's not the newest one out but I was getting good speeds from the virgin service. After a search around the internet I found a forum instructing me to connect the white modem box directly to the Capsule and set the capsule up in PPPoE mode. This all worked really well but I was suprised at how slow the wireless connection was compared to the HomeHub. The HH4 got me around 71Mb bits per sec and the Capsule got me around 43Mb per sec. Can anyone give any guidence? I am happy with the wireless speed the HH4 is giving me but wite wifi signal can be erratic at times - some mornings a power cycle is needed to reset the wireless signal. Also, when my wife uses her hair dryer, this also sometimes knocks out the wireless signal and I have to reset. Any help would be great. Thank you

    My time capsule bust recently but before that I had it connected via. powerline adapters directly to the HH3 rather than to the modem.
    I know I only have infinity 1 but I used to get download speeds via. wifi of 37.6 - 37.8 from my 38.72 connection from the time capsules wifi.
    I now use an even older original Airport Express to create a WifFi network in the same manner and get exactly the same download results.
    I would recommend steering clear of the OpenReach Modem and connect the Time capsule to the HH4 and see if you get better results that way.
    I would also set your WiFi to 802.11n only (5GHz) to keep away from interferring signals.

  • NJ FIOS Very slow speeds

     I just recently got FIOS and everything has been good until tonight.
    It seems after about 7pm my speeds have been dropped dramtically from 25/5 too 1/5
    My computer is not the issue
    I have already tried rebooting the modem multiple times
    The slow speed seems to come on at random times and then fix itself
    Could this be since FIOS just moved into my area and they are working on something around here?

    It could be a problem with your connection if speeds fall past 7PM. Are you testing from a Wireless connection by chance? Know of any neighbors suddenly seeing issues?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Slow Speeds using WRT54gs Router on Comcast

    I have Very Slow speed the longer I use my Internet on Comcast, My system is Wired using Comcast Modem and Linksys WRT54GS Ver. 7.0. I also have A Xbox concected to to this network with one other PC on wireless. Please Help no one can tell me way

    I have a similiar problem. The wired desktop has intermitten slow spots. I am not sure if this is due to a software firewall issue or what. Never had the problem before installing the router so I know it has something to do with the router.

Maybe you are looking for