Slower then paid for connection speed, need help solving problem

hi i was wondering if someone could help me figure out what the problem is with my connection speed, i am supposed to be getting 1120kbps download an 448k upload but im not getting them. i am downloading at 100 or lower kbps an im not sure what my upload is as i havent uploaded much lately but im not to concerned about the upload for the moment. i am using the router (?) or modem(?) which ever you wanna call it model number 6100G. i only have 1 phone an it has the filter thing connected to it so i dont think that is the issue . well ill leave this post here an check back soon , if someone can give me some info to see what my problem might be id appricate it

Hello paintballer01,
I sent you a private message to further assist you.
Thanks,
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

Need help solving problem if possible

Will a1096 display connect to 2008 macbook. Without a firewire slot to plug into will this not work? I have the vga to mini dvi converter but still no image.

cmykdms75 wrote:
Will a1096 display connect to 2008 macbook. Without a firewire slot to plug into will this not work? I have the vga to mini dvi converter but still no image.
The 2008 MacBook uses Mini DVI, and has no FireWire.
<http://support.apple.com/kb/SP5>
It should work with a Mini-DVI to DVI adspter.
The 2008 MacBook Pro has DVI and FireWire.
<http://support.apple.com/kb/SP4>
It shouldn't need any adapter.
Neither use Mini DisplayPort.

RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod. Will restoring it stop/delete my downloading movie? what else does it delete?

RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod. Will restoring it stop/delete my downloading movie? what else does it delete?

Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
When you restore via iTunes iTunes will download the firmware(ipsw) file. It could be that the microwave damaged the iPod and iTunes does not know what it is.

I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

I have the same problem and I haven't solved it yet. On Friday I plugged in my iPad to my work computer after not having done so for quite a while. Today I went onto the work computer and discovered I had not updated iTunes before plugging in the iPad (and which I cannot do without an administrator password). I guess I will update iTunes and try again when I can get the guy to show up with the password. I hope that works. The reset idea does not work on mine.
Was your iiTunes updated before you tried? Have you found any solution yet? Mail and some internet apps still work but games, notes applications, spreadsheets etc. just begin to open and close immediately.
If anybody has answers I'd love to get some clues.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Bought a Template for a customer Need Help

I know HTML but the coding to change things baffles me. I am out of help with the seller who is in Australia.
This is what the .txt looks like that I change function with.
&Home_txt8=<font color="#d0d0d0"><b>text goes here
It looks straightforward but I cant use /* */ or <!-- to deactivate stuff so I can try it out.
Any help would be welcomed.
the url of the site is www.danceations.com
I have done some mods but want to do more.
Joepd

The replies are terse and don't come right away. I bought it from some
outfit in Australia. When I asked how do I get rid of the pulldown phono on
the index page the answer was "remove the first page of the Flash.fla.
Except it took out the song I added and I would need tro recreate a Flash Page.
Ugh!
Not a good experience.
joepd
In a message dated 2/9/2012 4:19:49 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bought a Template for a customer Need Help
created by John Waller (http://forums.adobe.com/people/John+Waller) in
Dreamweaver - View the full discussion
(http://forums.adobe.com/message/4196974#4196974)

I bought an app which was free. To get the full version I then paid for it. I used it for months and now it's saying I have not got the full version and I no longer have access to the full app like I used to.

I bought an app which was free. To get the full version I then paid for it. I used it for months and now it's saying I have not got the full version and I no longer have access to the full app like I used to.

Try contacting the app support of the particular app your using.
Most apps have an app support button on their app page within itunes.
If they wont reply within a reasonable amount of time and you feel like the particular app developer has cheated you, bring the issue forward to apple care.
Note that app developer have their own customer support.

How could I convert a locked PDF file to Microsoft Word file?Uergency for exam!Need help!

How could I convert a locked PDF file to Microsoft Word file? Because of locking, I could not print it. Uergency for examination! Need help from veteran!

Adobe do not offer any products, or help, in hacking protected files.

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I need help solving Latest Flash Player upgrade crashing issues.

I recently upgraded my flash player at Adobe reccomendation. Now it crashes all the time. I need help solving this issue. I currently have Flash Version 11.5.502.135. My old version never crashed, not even once. I would be fine uninstalling the new version and going back to the older one but i cant find it.

Could you please create a crash report? The following page has more information: http://helpx.adobe.com/flash-player/kb/report-flash-player-crash.html
You can install Flash Player 11.4.402.287 version.
Thanks,
Sunil

TS1702 how can I get anyone to give us answer on the iphone apps casino game we purchased few days ago which once the token was finished we were not able to reset and play just for fun and not for gambling. we need help and not to be charged additional

few days ago I have purchased Iphone casino games from itunes apps store. One of the game was made by the company called "ARISTOCRAT" dragan game. Usually we will get basic tokens to play the game, and if we ran out of the tokens all we need to do is going into "manu" and "setting" selete "dream" and reset that we should be able to continue play the game with same amount of the basic tokens. The one game would not let us to go back to the game. There were msg came out said" game center requires an active connection to the internet"? I didn't feel comfortable because we purchased the game for $1.99 to play for fun and not to gamble. We do have credit card on your file. We don't want to be charged alot of money for something not in our well. I need help to answer the question on the following:
1. Are we able to ever play this game again without going to internet? We don't even know which site to go to, because when we press the ok button nothing else came out to direct us to any area.
2. We only purchased the few days ago order ID: MGT74GN6V7 on 10/03/12. all the other games we purchased we were able to continue to play by doing the same setting.
Thank you for your help and looking forward to hear from you!

You need to contact itunes support
We are all itunes users just like you.
http://www.apple.com/support/contact/

Powerbook G4 looses settings for booting for firewire?Need Help

I have a powerbook g4 17 inch al..
1.67 pro
2 gigs ram
and I formatted a seagate firewire 800 drive to be my hdd replacment <<it died
well its installed fine ( partations is for powerbook boot)
however when i shut down it doesn't find the drive..
I tried ... setting the startup disk in preferences
disk repair... permissions repair...
if i press the option it doesn't find the drive... however it might have once found it before i migrated all my settings from time machine to it...
the only way it works for me right now is to use the cd and then disk utilities..then choose startup disk... then it stARTS...
any help would be great...
thanks stateapple

war is still on because computer are the key to uniting this world and ending war...
and at macs prices they will not be the choosen machine...
the prices are still high... and the prices 15 years ago were out of control...
you get what you pay for... well this forum is proof that macs as far as hardware is concerned is no different then a pc of the same caliber ...both break down
only difference is the pc doesn't cost an arm and leg to get it working again...
why do you think i am trying to boot from firewire...
because my harddrive quit after 3 years..right after warrenty ends....hmmmm
when will a computer company ofer the same lifetime warrenty i can get from sears for my tools....
yea i need to renew it every few years but at least they stand behind there product as long as I choose...
I would still have my mac under warranty... but it wasn't an option... what does that say about the product or the company selling it to you....( keep in mind Sears offers a warranty for all tools and I could keep the warranty going forever)
but that not what i was asking....
how do I get help online with a professional to help solve my computer issue?
i live an hour and half from the closet apple store.... 2 hour round trip...
thank you...

Need help solving this tricky connect paths problem!

I need to convert a bunch of separate paths in particular way so they create one single continuos path as shown in the attached PNG file.
It has me stumped. Does anyone know of a way to do this via scripting?

How often do you need to do this? I think that a script which would work properly may be more work than is worth the time.
I'm sure something like this could be done, but the real problem would be what would the next group of lines that you run the script on look like? Would a script that works for this circumstance work properly for another shape?
Here's some parameters to think about:
How do you determine which line segments (or endpoints) in the document need to be connected? All points in the document, or will you be working with a selection?
Once you determine the points (eliminating all that are already connected), how do you want them connected, and which point do you start with? Connect to the closest available point would seem what you want, but depending on how you determine which point to start with could give you different results.
You might want to loop through all eligible points, and save the distance to every other point into an array. Then, loop through connecting the 2 closest available points until you've connected every point.

I bolought from itunes when computor crashed in a storm. had almost 700. only 559 came back.i changed the comp. name right after this.. is that why i cant get the othrt songs i already paid for. i need to no how to get them back. ,

when your comp.crsashes durning a storm and had to be repaired. got it back all of the 700 songs i paid for did not come back. only 559 did. how do you get all of them back. only got back 559 of them and my wife and i changed computers after it was fixed and switched computers and changed comp. names. do you think thats what keeping it all from coming back, but its all in the same house on shared. so is ther a chance i could get them back from itunes. i cant even get a list to print up so we hwve the correct amount ? old email, new email, would that have any affect at all for the last 150 songs coming back?
<Email Edited by Host>

Hello~
     I also tried to remove "air." package name in air application. And i encounter the same problem.
     I do not find any solution to decode the xml inside res folder by AXMLPrinter2.jar. And those xml inside is compressed which is unreadable.
     However, what you can do is copying the structure of res folder. And go to your air sdk file path - adobeair-sdk-folder/lib/android/lib/resources/
     Replace those file exists in your res folder. And copy "values" folder to your res folder.
     Hope this solve your problem~

I can not get FaceTime cause it says that it is waiting for activation I need help

I need help with activation of FaceTime

Back up, Erase all content and settings, Restore iPhone (downloads fresh iOS), restore from backup. Should fix. You will not lose texts, etc.

Slower then paid for connection speed, need help solving problem

Similar Messages

Maybe you are looking for