Slowing Down/Speeding Up Loops

Sorry, nevermind, I found the answer.
Message was edited by: beirut

This is one of several possibilities you might try:
https://help.apple.com/logicpro/mac/10/#lgcp1cc678a7
Have a nice day!

Similar Messages

I know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

i know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

never mind i found the answer

I cant slow down a blue loop?

hey, ive tried to slow down a blue loop (dance beat 053) but when i change the tempo it distorts or leaves out beats or something from the loop! i just want to slow it down a bit! any help?

I have Club Dance Beat 053. Is that the one? It doesn't seem to lend itself well to tempo changes. I think that can happen with real audio loops.

Slowing down/speeding up (Automation-maybe?!)

Hi
I want to achieve a sound that slows down - for example I want to take a melody and slow it down and then speed it back up - I'm not sure how to achieve this effect. I'm not sure whether to try & find a method of doing this in Automation or via another method - If anybody knows how to achieve this then could you please help me?
Many Thanks
Alex

If it is to affect the whole project, then I'ld say make a tempo curve in the global track *Tempo Track* .
Fotofinish, Doc

WRT54G slows down speed and makes many downloads fail

I can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
Help!

So the concern that you explained is that you cannot run videos,PDF's or any software updates while connected through router.. So in that case you need to upgrade the firmware of the Router which can be downloaded from the Cisco website ( homesupport.cisco.com )...
Then reset the Router and power cycle the whole network....
Once done with that you have to reconfigure the Router again according to ISP ( Internet Service Provider ) setup...
Disable the anti-virus and security centers if any...

X-Fi and sound slow-down/speed

For a while now my X-Fi Fatality with up to date drivers has some weird problem. It may sound two-fold, but I think the issue is related to the same problem.
In my favourite media application, MediaMonkey, I play my mp3/m4a files and sometimes it suddenly starts to play a file at double, or more, speed. If you're old enough to remember Alvin and the Chipmunks, well, it's close to that. If you then double click another file, it will play it at normal speed, click another file again, and back to the double speed. I think this is an important fact of the problem, which I will explain down below.
Now recently a second phenomenon started occuring (I do not think I have noticed it before) while playing World of Wacraft. When I have alt-tabbed to the desktop and started some background music (not sure if this causes it, or merely the alt-tabbing) and go back to WoW, sometimes it starts to play samples within the game at half or slower speed (I also suspect higher speed too). Now, part of the game are still using sounds that are normal and some others are getting played back at slower speed. Again this is important.
What I think is happening, based on my (limited) experience working on audio drivers for BSD, is that one or more channels of the sound card are being set to a wrong playback speed. This makes sense if you keep in mind that for the media player it will start the playback of the next song on another channel. This theory gets more support if you understand how games generally deal with audio playback. You have a number of channels, one or more used for music, and others for various sample playbacks (such as weapon sounds, enemy or your own shouts/pain sounds/grunts). In WoW this shows with certain spell effects or voices from your characters, you either hear 'this spell is not ready' in a very slow, low way or with certain weapons hits it sounds incredibly short, as if it 'pops'.
Only reason I am now posting is because a friend of mine got an X-Fi yesterday, installed it and the latest release drivers and today complained to me that her media player was playing audio at double (or more) speed. So I am much more convinced it is a driver issue that's causing this.
Anyone else experiencing this? I saw some forum posts and sounds that some beta driver in June/July fixed this, but I have been diligently tracking the release drivers (I haven't tried the current beta yet) and for me the problem is not fixed, not for my friend.

foundy wrote:
ok so i use a berhinger euro rack pro mixercool edit pro and sound forge 6 softwarei dont seem to be able to get decent mic levels without pushing all sliders near top.i use sure and sony dynamic pro micsdo i need to jumper the i/o dri've for the mics
Hmm... there are so many euro rack pro models available ... but, in generally, if you plug the mic into behringer (XLR) and then record it through X-Fi line in (as I guided earlier), you should get + 60dB gain for microphone already in behringer .. this should be enough (max output from Behringer is 28dBu if you connect the mixer to X-Fi through Main outputs).
Are your microphones stereo or mono? If stereo then, is the X-Fi Mic input stereo too?
Also, you need to remember; when you record using non-ASIO software (as like cool edit) you set all 'internal' signal levels (source/recording levels) through X-Fi mixer software (creation mode) in any case. For microphone (if you connect directly into card, there maybe is +20dB boost option available (X-Fi Mixer). Working in ASIO driver mode, you should get highest levels. I can't remember if SF6 supports ASIO fully ...
If there is this jumper for two different michrophone types (like there was in some earlier SB cards), you'll find all necessary information on this matter from X-Fi User's Guide.
jutapa
EDIT:
This is the way I have connected my small mixer (PHONIC MM502, different from the one in the picture) into this PC w/ AP92:
src="http://img42.imageshack.us/img42/26/mixertocardvj5.png">
In picture, for soundcard #4 is Line-Out and #5 is Line-In.Message Edited by jutapa on 02-02-200705:0 PM

Slow down speed for testing purpose between virtual machine in hosted in Hyper-v

Hello All,
I have searched and could not find thread related to this .
There is a scenario to test: the network speed between virtual machine [client and server ] must be really slow to check the application behavior on connecting to server.
Please advise . thanks in advance

Hi
Thanks for the reply . I am using
Virtual machine manager console .
right click on the virtual machine, i see network adaptar in Hardware Configuration and there no option to choose speed in any of the option.
Please guide me if i am wrong

Mp3 player that can slow down/speed up songs?

Hi there!
Is there an mp3 player that allows me to change the speed of the songs? I know that audacity can do this, but I need an on-the-fly solution, I don't want to alter the files on disk.
Any suggestions will be appreciated!
Best wishes,
Rufus

From the mplayer2 manpage
scaletempo[=option1:option2:...]
Scales audio tempo without altering pitch, optionally synced to playback speed (default).
speed=<tempo|pitch|both|none>
Set response to speed change.
tempo
Scale tempo in sync with speed (default).
pitch
Reverses effect of filter. Scales pitch without altering tempo. Add '[ speed_mult
0.9438743126816935' and '] speed_mult 1.059463094352953' to your input.conf to step by
musical semi-tones. WARNING: Loses sync with video.
both Scale both tempo and pitch.
none Ignore speed changes.
If you scale tempo
mplayer -af scaletempo=speed=tempo
(it has the same effect as the example in my previous post)
the pitch remains constant, but the song plays faster / slower.
If you scale pitch
mplayer -af scaletempo=speed=pitch
the song will play at the same speed (will have the same duration) but you can change the pitch.

Speed up and slow down music

Hi, I listen to a lot of lectures and I like to practice my karaoke, so it helps to be able to slow down the audio files. Windows Media Player 10 and 11 have this function built into the player but I can't find in Quicktime and I didn't see it mentioned in Quicktime Pro. Am I missing it? Can you recommend a player that will slow down/speed up my audio files?
Thanks,

Is there a way to Export the song file at the slowed down speed? I've tried and the saved file continues to play at normal speed.

Really stuck with speeding up and slowing down clips

Hi gang,
I have been reading the Final Cut manual for the last hour and fooling around with my clips, but I can't get the effect that I want.
I have a clip (CGI of a star field moving towards the observer) that I want initially to be frozen, then I want the clip to accelerate rapidly, and then end at about double normal speed. I thought I would be able to use keyframes and specify the playback rate at given points, but that option doesn't seem to exist. I have been playing with variable and constant speed settings, but these don't seem to work either.
Ideally, the clip would go like this:
1) first frame of original footage is frozen for 2 seconds.
2) the original footage then begins playing, accelerating rapidly from frozen to double speed over 2 seconds.
3) remainder of original footage plays at double speed until complete.
I feel like I am missing something obvious, but I can't get it to work!
Any suggestions appreciated.
Cheers!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

Speeding up and Slowing down Clips

I know how to do this on the older versions of imovie, but this new layout is useless. Anyone know how to speed up clips? Im so confused!!!!!!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

Extremely slow DSL speeds. Up speed higher than Down speed. Please help.

I just purchased the 1.1 - 3.0Mbps hi-speed DSL package.
Verizon speed test shows .17Mbps down and .536Mbps up. This is obviously curious for two reasons: 1) the incredibly slow down speed, and 2) the down speed being slower than the up speed.
Curiously, speedtest.net shows different results:
2.45Mbps down, .55Mbps up
What could this mean? Transceiver data follows.
Transceiver Revision 3.3.6.10.0.1
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path FAST
DSL Speed (Kbits/Sec)
Down Stream Path 3360
Up Stream Path 864
Margin (dB)
Down Stream Path 27.1
Up Stream Path 16.0
Line Attenuation (dB)
Down Stream Path 20.1
Up Stream Path 8.0
Transmit Power (dBm)
Down Stream Path 6.8
Up Stream Path 11.9
Thanks in advance for any advice/ assistance you can offer. This is extremely frustrating.
M King
Solved!
Go to Solution.

OK. It seems as though you're suffering from what some people call "Juniperitus." If you're on a Remote DSLAM that uses Alcatel Litespan equipment (Litespan 2000 for example) along with being connected to a Juniper Networks ERX edge router, there tends to be an incompatibility between the two pieces of equipment that causes TCP connections and pretty much any other form of transfer to see artificial packet loss, which results in transmission. This results in inefficiency in every transfer, so what you're seeing is simply a result of all of this. In the past when Verizon first installed Litespan, they were using older Redback Networks edge routers, which did not create such problems. I'm on a Litespan and happen to still be on a Redback in my area (one of remaining ones still in operation in my area) and I get my max line speed with no issue. It's unfortunate that these actually perform better despite the Junipers being far better edge routers in terms of capacity.
I know someone who should be able to get this fixed for you. I'll send you a Private Message.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Time mapping in Logic? Want to speed up\slow down track.

I've used time-mapping in Final Cut. But never in Logic. I've got a LOT of slowing-down \ speeding-up to do on a score that will be mostly midi \ sample instrument based.
Could someone point me to whatever it is called in Logic?, and are there choices of how to do it? Complex vs. easy? I vaguely remember finding it tricky in Logic to create a click-track 'after-the-fact' to match a piece of audio.
All ears,
Ben

Hi Erik,
I've got a Bach piece I've midi'd, written in rather than played (it would take me days to learn to perform it decently). There are no dynamics in the piece.
I want to add the dynamics. Volume\velocity is easy. But I also want to start the performance slow, speed up, then slow down.
If there is any 'real' audio I will add it after, so that's not an issue, I'll just follow the scored track.
What I need is the easiest way to control the speed of the performance ... speeding up, slowing down incrementally (rather than just abruptly changing the tempo). I remember the 'beat-mapping' now, as something you do after you've recorded a live-audio piece. I also remember it being really tricky to work with.
B

Hey guys, i am trying to slow down the velocity on a tittle in order people can read it properly. Any suggestions?

Hey guys, i am trying to slow down the velocity on a tittle in order people can read it properly. Any suggestions?

speed = distance x time
so, to slow down speed, your clip/title has to be 'longer'.

PID control loop slows down during execution.

Hi, I am a attaching a LV8.6 code that i am currently using to control my engine experiment. I use PID control where the input signal is an rpm value that i measure using a counter. The ttl signal from the sensor is not clean and so i use an analog trigger to generate pulses on the counter from where i measure the frequency and hence the rpm. The output is generated as an analog voltage on an output channel. The problem i am facing is that the loop runs really good when i start off but gradually the loop keeps slowing down and this greatly affects my ability to control engine speed. I am not sure why this is happening. I tried increasing the sample size and rate (so as to increase the buffer size) but this didnt have any effect on the speed. I am guessing its a problem with the way i have my loops setup.. any suggestions would be greatly appreciated.
Thanks, Shyam.
Attachments:
PID control loop.vi ‏33 KB

Hi all..I realised my mistake soon after posting as usually is the case..the create channel vi for doing the analog output to the output channel was within the loop and slowing things down..when i moved it out..it fixed the problem!!
Shyam.

Slowing Down/Speeding Up Loops

Similar Messages

Maybe you are looking for