Slowing scrolling credits

i'm new to the imovie program..i was wondering how i can slow down the scrolling credits..it seems like it's going way too fast..thanks..

The scrolling credits will scroll to fill the time you have set for the scrolling credits to appear - in other words, they will scroll for the length of the blue box. To make them scroll longer, you can lengthen the blue box by clicking on the right edge and dragging to the right. You can also click on the left edge and drag to the left.

Similar Messages

I know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

i know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

never mind i found the answer

How can I make the scrolling credits slower?

At the moment they scrol really fast and you can hardly read them.
Thanks

I cannot move the blue bar in any direction. The clip is stuck on 4 seconds - I didn't choose this length, when I selected Scrolling Credits and dragged them into the Project area that is what iMovie automatically set. Is there a way to extend thetime period beyond this 4s limit?

Smooth Scrolling Credits for FCP !#$#

To start, I am creating scrolling credits from scratch in Motion 2 to import into my NTSC-DV FCP5 session.
I had accomplished beautiful scrolling credits in Motion to FCP about 6 months ago and cannot for the life of me produce good looking scrolling credits again! I have gone through this forum and there are about 100 different ideas out there...export using the animation codec with "render fields" selected, simply import the Motion session into FCP and render it, use large fonts, use the "scroll up" behavior, use keyframing... I have even tried After Effects which was WAY easier than Motion but produced similar fluttering effects.
Any way I try to do it, the scrolling text always comes out in FCP after rendering (and viewing on an external monitor) with the all too common jagged scroll...like the letters are fluttering in between fields as they scroll up..
My latest atempt in Motion to create this scrolling text consists of this:
1) Open an NTSCDV session in Motion
2) Using the text tool I write in my credits in the "Inspector" under the "text" tab
3) I then appply the "scroll up" behavior to the text from the "Add Behavior/Text Animation" dropdown menu at the top of the screen.
4) The record light below the canvas is on, I goto the newly added "Scroll Up" behavior in the "Inspector" under the "Behaviors" tab and there is a keyframe already added at the beginning of the "Scroll Up" layer in the timeline. I move the "Position Offset" slider down so the beginning (top) of the text is right below the bottom of the screen.
5) I then move to the end of the "Scroll Up" layer in the timeline (which is 30 seconds long BTW), add another keyframe in the "Scroll Up" layer and slide the "Position Offset" slider so that my text has just disappeared at the top of my screen.
6) I drag the cursor through the 30 second roll in the timeline verifying that it scrolls up the way I want.
7) I ensure the project properties are set correctly before I save. This includes making sure the field order is set to "Lower" in the "General" tab, and in the "Render Settings" tab making sure the output antialiasing method is set to "Best" and that "Use dithering" IS checked. In the Motion Blur setting the samples are set to "8" and the shutter angle is set to 360.
8) I then save the project, import the project file into my FCP NTSCDV session, drag it to the timeline, render it, and playback to an external monitor.
Possible Problems:
1) I am thinking that maybe the text is scrolling up too slow and it is impossible to get clean text without the jagged/fluttering effect. As when I shorten the scroll to 20 seconds there is less of a fluttering effect (but it is impossible to read the text as it is scrolling up so fast)
2) There is some "Project Property" setting in Motion that I have messed up.
3) I should not be using the scroll up feature with keyframing but perhaps just keyframing the actual text itself to move up? (although I have tried this with worse results)
I have wasted hours trying different routes, reading the manual, searching this forum, to no avail. Who has the magic recipe I am looking for? Please help.
Dual 2 Gig G5, 4GB RAM, 2 TB HD Mac OS X (10.4.7) Using SATA drives for all editing apps
Dual 2 Gig G5, 2GB RAM, 1 TB HD

Bryan,
I attempted to adjust the white level, the field order, but don't think ever got to messing around with FCP's processing settings...I am actually encoding the film right now as I was under the gun and actually found the "scroll" plugin in FCP to work just as good if not better than Motion without any tweaking so had to roll wth that. I will attempt to tweak the Motion file again though as I cannot bear sub-par credits. Will also email you the Motion file if you don't mind.

Speed of scrolling credits

is there a way to slow down scrolling credits in imovie 09 to make them easier to read? I have only had experience adjusting the speed of video clips...

Thanks. I have actually gotten to be fairly decent with clip trimmer and the fade in, fade out and volume equalizing functions. The problem I ran up against was when I wanted to use say a minute of the song that was at the end of the song. If I import the song and it is the last clip in the iMovie project, it only imports as much of the song as there is video remaining. I have gotten around this by temporarily adding blank space to end of video just so that I can import and trim the song.
As with many things I do, I sense there must be an easier way, but I haven't found one yet!

IMovie '11 Scrolling Credits

I'm using Scrolling Credits for the last clip in my movie. The credits whizzed past, and some research led me to try lengthening the clip over which the title is placed, and to lengthen the title bar to match. I can read the credits now, but they finish long before the clip does, so I have a black screen and music playing for about 15 seconds. No matter how I set the lengths, the end of the scrolling ends in about half the time allotted. If the clip is set for 30 seconds, the scroll takes 15 seconds. If the clip is set for 5 seconds, the scroll takes 2.5 seconds. How do I make the title last the same amout of time as the clip?

I can. If I could only make the title longer than the clip, that would work. I can't extend the blue bar past the end of the clip. And no matter how long or short I make the clip, the title scrolls past in half the time. If it's long enough to slow it down to reading speed, that means I've got 15 or 20 seconds of black background and music going on after the credits are done.
I want to know how to make the credits last the same amount of time as the clip. Please note that extending the duration of the clip and the title does not help. The title remains visible for half of the duration of the clip, whether it's 10 seconds or 10 minutes.

How do I make scrolling credits title stop moving and leave text on screen?

Hi, I have used the scrolling credits title template to end my first FCP X video ( I'm a newbie using the trial version). I want to slow down the speed of the scrolling and then have it end with the text remaining static so that veiwers can read the credits. At the moment it goes too fast and ends before you have a chance to read the names etc. I want to leave the text stationary for a few seconds so that the contact details can be seen.
How do I do this. I have not bought Motion just yet as I am still using the Trial version. Does anyone know of a good clear online tutorial that demonstartes this?
Thanks

Create a compound clip from the credits clip. Select the clip. Position the playhead where you want it to be stationary, Shift-H to hold.
Russ

Effects, titles & scrolling credits deteriorating

Hello everyone,
So far I’ve made two half hour comical movies of the kids (which have been met with rave reviews from relatives around the world)
My problem is this,
Effects like slow mo and scrolling credits are fine when first created but as I play(ed) with adding more clips (with all the editing in and out of elements & clips etc.) more and more certain sections (1 x slow mo) became noticeably jerky. And the one scrolling credit would become more difficult to read (rippled might be a good word).
It seems the more I had anything to do with the project as a whole the worse these sections became.
The finished product is spoiled from what it first looked like (from when first creating the slow mo etc.) This I have proved because I did burn an early stage of both projects and these are noticeably different to watch both on Living Room DVD and PC.
Is what I’m seeing ‘because iMovie is not Final Cut Pro’ or can the average Joe get a quality product out of iMovie HD? What am I doing wrong?
Thanks in advance for the guidance.
G4 Dual 1.25 Mac OS X (10.4.3) 2gig Ram

Hello, utterly me,
Welcome to the discussions. What final format are you doing? DVD?
If so, have you saved your DVD project as a 'Disc Image'?
I have found that if I have an iMovie with lots of transitions, effects, audio or if the entire movie is longer than about 1hr 20 min, ( and lots of mine are) iMovie just seems to get slower with more stuttering, often with video freezing while the audio plays on, and sometimes with audio skipping and stopping.
I discovered that if I manually move the playhead to be sure the effect/transition is what I want, the final burned DVD will be fine. I am usually putting photos and video clips together and adding audio segments. I use lots of transitions. Most of the time the video that originally played correctly after importing and editing will not even play much at all by the time I am finished.
I go ahead and close iMovie after making my chapter markers. I don't go directly from iMovie to iDVD because iMovie will want to render some of my clips and iMovie does not do a good job of that.
I open iDVD, create my project and then drag in the iMovie using the 'custom' tab, and selecting 'Movies' from the 'Media' option.
I save the final DVD project as 'Disc Image.' This will save a finished DVD project, ready to burn. You can check it with DVD player to see if the movie came out correctly and plays well. Then, you can burn your DVD disks using 'Disk Utility.' You can save the Disc Image of your movie and delete the original movie when you are finished, thus saving lots of hard drive space because the iDVD project is much smaller than the iMovie. You will, of course, not be able to edit the disc image, so be sure you are all done with editing before you delete iMovie! Once you have the disk image, you can always burn another DVD from it in the future.
Post back if you are still having problems, or if the above is not clear!

Very specific question re: scrolling credits

I am using the "scrolling credits" theme to end my movie/slideshow. I can't seem to slow down the scroll and the credits are flying by. Any one know how to do this?

In addition to AppleMan's good advice, I thought I would provide an extra tip that may help with the Scrolling Credits title.
I'm not sure whether the tutorial AppleMan has linked to covers my tip, as the tutorials aren't playing for me at the moment. Maybe Apple is doing a bit of maintenance.
Here's my tip. If you have used one of the backgrounds provided in iMovie, to which you are applying a Scrolling Credits title, you may have to extend the duration of the background clip as well as extending the title duration. iMovie's behaviour here is not always consistent.
So, if the title has defaulted to, say, 4 seconds and you want, say, 20 seconds, you should firstly change the background clip to 20 seconds. To do this, either double-click on the background clip to bring up the Inspector, or click on the small gear icon on the background clip and select Clip Adjustments. From here you can change the duration of that clip. Finally, follow AppleMan's advice on how to change the duration of the actual title text. Ensure that this duration exactly matches the new background duration, unless you wish to add a transition at the end, in which case extend the background further.
One other tip. For double-clicking to work when editing, you need to set this feature in iMovie's Preferences. In the Preferences window there is an item "Double-click to" - with 2 choices, Edit or Play. Check the Edit box.
Hope this is useful. I've personally had trouble with "Scrolling Credits" timing and this is how I solved it. The same tip applies to the timing of the "Far Far Away" title. In fact that may have been where I first encountered the timing issue (can't recall).
John

[SOLVED] Fixing slow scrolling in firefox with nvidia and 64 bit

I'm experiencing very slow scrolling with firefox on sites like
http://www.roadrunnerrecords.com/blabbermouth.net/
http://www.vai.com/News/index.html
I'm running 64 bit with KDEmod. Scrolling is fine when I remove flash completely but on Ubuntu 10.04 (64 bit) the abnove sites scroll fine on a different machine (with intel graphics). I read somewhere by modifying xorg with "AccelMethod" "EXA" to "XXA" scrolling becomes very smoth onm ATI and Intel. Here is my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 28.0 - 72.0
VertRefresh 43.0 - 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G92 [GeForce 9800 GT]"
Option "RenderAccel" "true"
Option "NoLogo" "true"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
is there something I can change to improve scrolling in firefox? I've tried to turnoff desktop effects and scrolling is the same annd also running firefox from a fresh profile. Hence, i suspect my nvidia 9800GT card to be the culprit. If anyone has a working xorg.conf with nvidia, 64 bit and smooth scrolling on the above mentioned sites please SHARE! Many Thanks!
Last edited by fettouhi (2012-02-22 17:42:10)

karol wrote:
> Tried it now and that worked. Running without a xorg.conf buty now I can't turn on desktop effects in KDE. How do I set that up?
Sorry, I don't use KDE, but it may be related to how do you start KDE: from xinit or via KDM or sth.
> How do I determine what driver xorg is using now that I'm running without it xorg.conf?
It's running the same driver as before.
> Using the binary nvidia blob driver.
Did you uninstall it? Did you install the nouveau driver? 'pacman -Qqs xf86-video' will tell you what drivers you have installed.
No, I don't have the nouveau driver installed. I have to check if I have the nv driver installed but I didn't uninstall the nvidia driver. I'm starting KDE via xinit.

How do I eliminate shaky text from scrolling credits?

I have added scrolling credits to a video and the scroll is not smooth. There is no stabilization or shutter roll mechanism to use with built-in, FCPX text and titles. So, how do I eliminate the shake from scrolling credits?

amee mk wrote:
i also have a problem with scrolling credits !! they are shaking very badly and i can't find solution for it it doesn't look pro at all ! i'm working on HD 1080 p footage and my project need to be done very soon if anyone have a secret knowledge how to fix it - please let me know !
What Karsten and Russ said.

Scrolling credits are unreadable when played in full screen

yet they look fine when I am typing in the info on the small screen. How can I fix this so the credit font quality is good when showing the movie in full screen?
thanks,
Charlene

I figured it out on my own.. seems that if you have too much info in the scrolling credits, it distorts itself. ARGGHH... had to delete and create a 2nd screen to keep the credits rolling.

Indesign CS5 Slow Scrolling

Hello
I'm currently being affected by a slow scrolling bug in InDesign CS5 where no matter what my scroll settings are the speed is constantly slow. Is there an override in InDesign somewhere to fix this?
This was also present in CS4 but not quite as bad and have also seen other posts in Ps forums.
Using Windows 7 and logitech mouse
Thanks
Nathaniel

Could you be more specific about this slow scrolling, and what settings are not making a difference?

Newb - smooth scrolling credits in AE ?

I am doing an intro title sequence for someone.
It consists of about three separate scrolling credits. The scroll from bottom to top.
I have done the text in Photoshop and imported it into AE.
My problem is the text appears jerky as it scrolls up.
Is there anyway to get AE to give me the smoothest scroll possible ?

If you are using the expression that I posted above all you do is set the speed to a whole number. DO NOT USE fractions.
The stutter your talking about can be caused by a bunch of factors. There's something called a seven second rule and a bunch of other info available HERE. Read both articles in this FAQ.
To change the expression to scroll horizontally just flip the values to the other parts of the array.
Expression for horizontal movement instead of vertical:
t = time;
fr = t/thisComp.frameDuration;
y = value [1];
s = 4; //Speed in pixels per frame must be a whole number
x = value[0] - (fr * s);
[x, y]
This expression gives you a little more freedom because you can position the layer anywhere you like in the comp and it will start crawling right to left.
To change the direction simply change the minus sign in the x method to a plus. To change this expression to a roll swithch the methods for x and y so Y is modified by time.
Let me explain the expression. the value[0] and value[1] declarations simply call up the original values of X and Y. The math is simple. We take time and divide it by duration of a single frame to give us a frame count in whole numbers. Then we subtract the frame number multiplied by the number of pixels we want to move from the original position. It's easy as pie.
I hope this helps.
Judder can be caused by an interaction with the refresh rate of your screen and the frame rate, from the frame rate and the movement, or from playback errors using mpeg compression. It's a bugger for some motion. Horizontal and vertical movement of hard edges like you get from text can be extremely problematic.

Making scrolling credits....Need to copy kids names of a pdf.....

Hi there friends,
Ok, I have a "end of year" dance concert to be cut.
I have the program on a PDF, but I simply want to copy the names of the students off that and place into FCE to work on scrolling credits.
What is the best way to do it?? Save the document as another format??
Regards,
Chris

Find someone with a Windows system, open the PDF file there using Adobe Reader, then copy and paste the names into a plain text document. Open the text document on your Mac, then copy and paste into the text generator in FCE.
-DH

Slowing scrolling credits

Similar Messages

Maybe you are looking for