Slowing SMB shares

Hi Guys, I am looking for some advice please. I have a Windows 2003 R2 Std 64Bit Server. I recently made some network changes and have changed its IP address, it’s still using a /24 but we needed to restructure our internal IP ranges. Since doing
this a couple of users have reported slowness browsing shares on the Windows Server, it’s intermittent and only effects a few (large) folders. The user sent me a screen shot showing a (not responding) messgage in explorer, when I logged onto his PC it took
around 20 seconds to populate the content of a folder, next time I connected it was flying along. He is adamant that it was all ok until I changed the Servers IP address.
Although this is going to be a massive shock to anyone who has any kind of skill we don’t use DNS on this network, we don’t have AD and I know that 2003 will soon be EOL. I plan to change all of this within the next two months.
Can anyone think why this would have happened when we browse shares by IP i.e. \\192.168.50.50\share\data\ for example ? its not like it’s a DNS or NB issue.
Appreciate any advice here..
Bob - Reno

Bob,
You didn't provide any information on the network topology between the clients and the file server, but unless you have some strange routing issues, my guess is the IP address change doesn't have anything to do with the intermittent file server performance
seen by your users.
Are you gathering utilization metrics from your file server and network devices? Use perfmon on the file server to monitor the CPU % utilization, memory free, network r/w throughput, disk r/w throughput and disk r/w
service times (latency).  The service time (latency) metrics are "Avg. Disk sec/write" and "Avg. Disk sec/read". The latency metrics are in seconds so you'll need to multiply that by 1000 to get latency in milliseconds
(ms). Since you indicated that to problem often occurs when someone opens a large folder, I bet your disk read latency on the volume where the files reside are the problem. For a general purpose file server, you want
the latency to average less than 50ms.
It could be many things, but checking the utilization and health of the server in question is the best place to start.
-Robert

Similar Messages

  • Why is my Mac pro slow to Open folders in a Windows SMB share?

    Why is my Mac pro slow to Open folders in a Windows SMB share?   We use a Windows Server for graphics storage and I can open the share just fine, but when I attempt to open folders within that share it takes sometimes as long at 15 minutes to display the contents of the folders.  This happend before and I switched to the other NIC port, but now it is doing it in both.  I can open other connections to Windows SMB shares with no problem. 

    Why is my Mac pro slow to Open folders in a Windows SMB share?   We use a Windows Server for graphics storage and I can open the share just fine, but when I attempt to open folders within that share it takes sometimes as long at 15 minutes to display the contents of the folders.  This happend before and I switched to the other NIC port, but now it is doing it in both.  I can open other connections to Windows SMB shares with no problem. 

  • Slow folder browsing on smb shares

    I'm having big problems browsing a smb share on a Windows 2003 Server share.
    Whenever i change folders in the share it can take up to 1-2 minutes before the new folder content appears.
    I tried lots of things such as editing /etc/smb.conf and also /etc/sysctl.conf without success.
    Anyone have any ideas on what could be wrong?

    Apple has always seemed to give poor performance for remote users compared to an equivalent Windows setup running over the same remote link. I think this is a combination of several things.
    Firstly, the Finder on a Mac gets a lot more information to display a directory listing than Windows Explorer on Windows does. The Finder is of course getting the same file/folder names but in addition can get Finder comments, labels (colours), custom icons, etc. which Windows Explorer would not.
    Secondly, I am convinced that AFP is not as efficient over slow links and/or high latency links as SMB.
    Thirdly, I am also convinced that the Finder is grotesquely inefficient in sending and processing commands and replies, whereas perhaps Windows batches things up. As an ancient example of this anyone else remember the floppy disk shuffle on the original Macs?
    I suspect because Apple have a very fast pipe to the Internet they have not appreciated how bad this can be. They need perhaps to consider getting a WAN link simulator and then they can see the problem and hopefully introduce more optimisation.
    Unfortunately there is not much you can do about any of these things, you could try using SMB on the Mac rather than AFP as this might cause the Finder to not try getting some of the extra information like colour labels. Avoiding using the Finder if possible is the best option, you could help achieve this by keeping shortcuts to files on the Server so you don't have to keep browsing to the folder itself.

  • Slow transfer from/to SMB share over Airport

    Recently I updated my Macbook's Airport with 2008-004 (OSX 10.5.5) update and now I am experiencing very slow transfers to and from SMB share.
    I get normal speeds (~3MBps) if I copy file from my macbook to iMac, but when I copy the same file to (or from) Windows share the speed drops to ~130kBps after 1 or 2 gigabytes of transfer and never recovers to full speed afterwards. If I connect to this Windows machine using FTP the transfer speed is normal - 3MBps.
    I also tried streaming to my appleTV which is also connected wirelessly and all movies play just fine.
    If I connect my macbook to wired 100Mbps ethernet the transfer speed to windows share is full 8MBps.
    Anyone has any ideas what's happening?

    This has been an ongoing problem of the Airport Extreme for, well, forever. In the beginning, I even thought my AE was broken, so I returned it to the shop to get a new one. I got a new one alright, but it has the same problem.
    I've Googled this problem many times and once in a while I try again to hopefully find a solution, but no luck so far. Whenever there is a software (or actually firmware) update for the AE I get very excited, only to get disappointed again.
    The performance of the AE I have now is really unpredictable, sometimes it would do up to 8 MB/sec. Lately though, it only does 1 MB/sec and the network activity looks really weird (a lot of spikes in traffic and then slowing down again).
    I'm 100% Mac here and nothing in this house runs windows, so I'm really lost on this subject and I feel like I should give up and just buy myself a good Linksys that actually does the job.
    But, just to keep trying: does anybody found a solution to this common problem?

  • 10.6.8 Slow SMB browsing of Windows Servers 2008

    MY IMAC 21 .5 Inch MAC OS X 10.6.8 slow SMB browsing of windows Server 2008 kindly anybody have any idea why its happened or after LION release maybe this issue will be solve.

    Hehe... Servers are tricky things for sure. 
    It sounds like you're expecting to have users log in from outside your network, but that you're testing from within?  Is this the case?
    If your users are trying to log in from outside the local network of the server, then you'll need to ensure that the correct port forwarding is set up on your firewall.
    Next thing I'd try...  Simplify your share to ensure that the problem isn't with your group set up.  Eliminate all the ACL's associated with it.
    Add one sole user to the ACL, give it read and write, and try to log in using that credential.
    Ensure that the POSIX Permissions are set to default.  (administrator should be the owner, staff should be group, read and writable only by the owner, everyone else gets read only)
    If that works, remove that user, add a group to the ACL and try and log in using a user that's listed in the new group specified.
    Perhaps if you supplied a little more info about your server and how it's connected to it's network.  What it's roles are etc. we might be able to give a little more insight.
    HTH
    -Graham

  • Windows Backup creates "locked" directory on SMB share

    I'm trying to back up my Windows 7 laptop to my Mac Mini over SMB.
    Normal non-backup file operations work okay, from the desktop: I can create folders, drag files, delete files, etc.
    But Windows Backup fails, because it creates a directory on the SMB share that--despite ACLs--OS X won't let anyone create files within, or change the security settings. The only option is to rm -rf the directory.
    The ACLs look like this (the directory Windows Backup creates is called 'MEGALITH'. I tried creating a parent directory (called 'Megalith') with inherited ACLs, but to no avail:
    sarsen:Megalith root# ls -le .
    total 0
    drwx------+ 2 windowsbackupuser  staff  68 Jan  8 12:49 MEGALITH
    0: user:root inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_i nherit
    1: group:admin inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_i nherit
    2: user:_spotlight inherited allow list,search,file_inherit,directory_inherit
    Even with these ACLs, I cannot chown the MEGALITH directory. Nor can I edit its ACLs in the Server window.
    My SMB config is:
    sarsen$ defaults read /Library/Preferences/SystemConfiguration/com.apple.smb.serve r
        AclsEnabled = 1;
        AllowGuestAccess = 0;
        AllowNTLM2Auth = 1;
        DOSCodePage = 437;
        EnabledServices =     (
            disk
        LocalKerberosRealm = "LKDC:SHA1.C5D430A59786EE0CC0515EEF37A77A538C6D612A";
        NetBIOSName = sarsen;
        ServerDescription = sarsen;
        Workgroup = WORKGROUP;
        "wins server" =     (
    And the error log says:
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: init request
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: init return domain: SARSEN server: SARSEN
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: uid=0
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: od failed with 2 proto=ntlmv1-with-v2-session
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: user=SARSEN\\windowsbackupuser
    Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request kdc: ok user=SARSEN\\windowsbackupuser proto=ntlmv1 flags: NEG_KEYEX, ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM2, NEG_ALWAYS_SIGN, NEG_NTLM, NEG_SIGN, NEG_TARGET, NEG_UNICODE

    For interoperability with Windows clients, this is absolutely 100% bad behavior:
    http://support.microsoft.com/kb/326549
    Note Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs. For example, you can delete, rename, and change a folder with the Read-only attribute by using Windows Explorer.
    The Read-only and System attributes is only used by Windows Explorer to determine whether the folder is a special folder, such as a system folder that has its view customized by Windows (for example, My Documents, Favorites, Fonts, Downloaded Program Files), or a folder that you customized by using the Customize tab of the folder's Properties dialog box. As a result, Windows Explorer does not allow you to view or change the Read-only or System attributes of folders. When a folder has the Read-Only attribute set it causes Explorer to request the Desktop.ini of that folder to see if any special folder settings need to be set. It has been seen where if a network share that has a large amount of folders set to Read-only, it can cause Explorer to take longer then what is expected to render the contents of that share while it waits on the retrieval of the Desktop.ini files. The slower the network connectivity to the share the longer this process can take to the point where Explorer may timeout waiting for the data and render nothing or appear to hang.
    Note In some previous versions of Windows, you can change the Read-only attribute for folders by using the Properties dialog box for the folder, but no versions of Windows permit you to change the System attribute by using Windows Explorer.

  • Active Directory, Windows 2003 SP2 Server and SMB shares

    I have 10 new iMacs that will be returned and exchanged for 10 HP wintels if I can't resolve an issue with SMB shares in Mac OS X 10.4.9.
    We had an old win 2000 server, and all the macs could mount their smb shares without problems.
    Recently we upgraded to two new 2003 sp2 servers, one of them the domain controller, and we can't mount their SMB shares. I followed this http://weblog.bignerdranch.com/?p=6&page=3 and/or this http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x to allow AD authentication, but still, I can't mount the 2003 shares (but can with the 2000 ones!!!).
    If I enable SFM (services for macintosh) then I can mount the shares, but:
    1) the network is slower (I supouse is due to appletalk implementation)
    2) and worse, names with more than 32 characters or with some special characters are not allowed. This renders 30% of our archives unavailable with the AFP solution.
    I also used all the authentication methods (Plain text apple, plain text windows, etc.) but no one works.
    I have now 10 days to find a solution, or all "my" macs will dissapear forever.
    Please, some advice or point to documentation.
    G4, G5, iMac Intel, Mac Book Pro, etc   Mac OS X (10.4.9)  

    Do you just want to mount arbitrary share from the win servers or do you want the macs to be bound to AD?
    The first requires the steps from your second link (allinthehead.com) but the latter (bind to AD) requires things like proper use of DNS, time synchronisation for kerberos to work and proper configuration as described in your first link (bignerdranch.com).
    Here are some more links for the latter (AD intergration):
    http://www.bombich.com/mactips/activedir.html
    http://www.afp548.com/article.php?story=20051202151540574&query=ad-od
    HTH
    -Ralph

  • Are slow smb transfers normal?

    Hi All,
    As I write this, I am trying to transfer 23 GB of data from my local drive to an smb share on a Linux file server. This and other transfers I have made to smb shares are stupefyingly slow: about 1/20 the speed my Linux and Windows machines will do the same transfer (100 base-T). Is this normal for 10.6.4?
    Many thanks,
    -T
    ifconfig en0
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet 192.168.255.184 netmask 0xffffff00 broadcast 192.168.255.255
    media: autoselect (100baseTX <full-duplex,flow-control>)
    status: active

    Some people reporting this problem have traced it back to the good old Nagle algorithm. The following page has something to try on the MacOS X side as well as some possible fixes on the Linux Samba server side.
    http://blog.julipedia.org/2006/02/samba-performance-under-mac-os-x.html
    I was trying to transfer her documents and Thunderbird profile.
    Thank you for the link. I could not locate an /etc/sysctl.conf file, so I create one and rebooted. No joy.
    I did find:
    http://forums.whirlpool.net.au/archive/965569, and
    http://discussions.apple.com/thread.jspa?threadID=1424000&tstart=0
    Supposedly, it is just bug that has yet to be fixed in Snow Leopard. Hopefully the user I turn this thing over to will not notice it when operating on single files. She needs Adobe's (yes elderly) CS3, which run well on Mac.
    Thank you for all the help. And sorry for the cranky old man stuff.
    -T
    sudo sysctl -w net.inet.tcp.delayed_ack=0
    net.inet.tcp.delayed_ack: 0 -> 0

  • Creating a folder on an SMB share using a Mac

    Hi everyone,
    This is more of a question than a problem I'm trying to solve, really. Though the answer might help me better explain the issue to our security team.
    Our environment has multiple Windows file servers, both 2003 and 2008. If one of these SMB shares is accessed from a Mac and the user creates a folder, will the ACLs on the share that are set to cascade actually cascade to this newly created folder? We've had issues in the past where ACLs that are supposedly set to cascade on a shared folder are not present on sub-folders created from Macs.
    Next question: if the share resides on a netapp device, do the same rules apply? The Macs are still connecting to these shared folders using the SMB protocol.
    All Macs are bound to our 2008 AD domain and use network accounts with local homefolders. The issue seems to happen when one or both of the following things happen:
    1. A Mac user copies/creates a folder on a Netapp share and for some reason it doesn’t inherit rights correctly
    2. We move the folder from one share on an actual Windows server to the Netapp and it doesn’t take permissions correctly.
    Please let me know if you need any other information.

    Let's put it this way: I'm asking on a Mac site because the people on non-windows support sites are WAAAAY more interested in talking about problems and solutions involving things other than Windows.
    I'm fairly certain that the windows servers ARE respecting their own inheritance rules, barring any major bugs and the like which someone may know about...
    The isue isn't with Macs moving shares to a netapp, it's with a share being moved to a NetApp that has folders created by a Mac. Talking with our security team further, it seems the problem may be limited to shares resident on a NetApp or moved from a Windows server to a NetApp.
    I was primarily asking to see if anyone knew of any issues with these particular situations or had experienced something similar and had dug into it any deeper with F5 (NetApp vendor).

  • Unable to mount SMB shares under Mac OS 10.6.5

    Help -
    *I can no longer mount any shares from my Seagate BlackArmor NAS-110*. I bought the device (a 1TB network drive with CIFS (aka SMB), NFS, and FTP capabilities (no AFP connectivity)) in June of 2010, and it was working fine until appx (18 Nov, 2010). My computer - MacPro 2x2.26GHz Quad-Core Intel Xeon (early 2009) with 12GB of 1066MHz DDR3 RAM and Mac OS 10.6.5. My home network is running on Apple's TimeCapsule router (version 7.4.2).
    Note: Problems began after installation of recent updates:
    11/10/2010 - Mac OS 10.6.5
    11/12/2010 - iTunes 10.1
    11/13/2010 - iLife '11
    11/13/2010 - iPhoto 9.1
    11/18/2010 - Safari 5.0.3
    I'm not sure which, if any, of these updates may have intrudced new code which impacted my ability to mount SMB/CIFS shares, or whether this problem is isolated to the NAS-110 (actually, reading numerous posts about connectivity issues (during/over the last month or so) shows similar issues with other external drives, servers, NAS devices). The issues may not have materialized until I rebooted the NAS or the Mac. FYI: The only firewall I'm using is the Mac's built in firewall, and I've got File Sharing (AFP, SMB) set to Allow Incoming.
    What happens? I can't mount the SMB shares. I can see the device in my finder. It shows up as "BA-22B9C2", and I can see the sharepoint folders (in Finder): Download, Public, and wiki. When I attempt to SMB mount the shares (by any of the following methods: Double-Click in Finder, use 'Go->Connect to Server' or using the 'BlackArmor Discovery' application) The share/folder icon does not appear on my desktop. It creates a mount-point in the /Volumes directory, but no folder appears on the desktop. I can 'cd' into the sharepoint, and I can see that Spotlight has attempted to index the sharepoint (a .Spotlight-V100 directory was created), but I cannot see the 'Our Music, Our Pictures, or Our Videos' folders inside the Public share/directory. Successive attempts to mount a share, using Finder results in additional mount points in the /Volumes directory (Public-1, Public-2, Public-3, etc), but no folder icons on my desktop.
    FYI: The 'Connected servers' setting (under 'Shared') is enabled in my Finder's Prefences (along with Bonjour and Back to My Mac), so connected shares should appear on the desktop.
    Attempts to mount shares using the Connect to Server method (smb://10.0.1.2/Public, smb://admin:[email protected]/Public) also fail. No folder appears on desktop. The password/login authenticates (connecting to server), and a mount point is created in the /Volumes directory, but no folder appears on the desktop.
    Attempts to mount shares using the BlackArmor Discovery application generate similar results. Shares are visible in the tool. I click on the 'Public' share (which has permissions set to 'read, write, execute' for all), then click the 'Mount Share' button. I am presented with an authentication/login dialog. I log in as a Registered user (name: admin password: admin) Once again, a mount point is created in the /Volumes directory, but no folder appears on the desktop.
    Notably, whenever I attempt to mount a share, Spotlight indexes the share, but then it dies on my computer. Spotlight stops indexing my primary drive (where the OS is installed for my Mac). I have to stop the mds process using Activity Monitor. mds restarts automatically, and it starts indexing my primary drive again. While this may not be critical to my troubleshooting efforts, it has caused some considerable consternation on my part.
    I initially (back around the 18th of Nov, 2010) attempted troubleshooting with the assistance of Seagate technicians, but they quickly gave up on the email support, insisted I had to continue over the phone, which costs ~$14.00 per 'incident' and isn't convenient for my schedule.
    I've already attempted to update the firmware on the NAS (from 1000.0361 to 1000.1081), but that won't work. The NAS indicates a firmware update (1000.1081) is available, but it reports: "Firmware is not found". I had a friend try this update using his Windows machine (and my NAS), with the same results. He tried with a a Vista box and a Windows-NT running through emulation. I also tried to manually update. I downloaded the firmware image file "sg1000-1000.1081.img" from the Seagate downloads page, and attempted a manual update on the NAS. That failed with error "Failed to upload new firmware image to system." Once again, my friend tried to perform a manual update to the NAS. He downloaded a new copy of the file (from the Seagate downloads page), and he got the same error.
    The Seagate techs recommended that I update the firmware. I explained my problems updating the firmware, and I have asked the Seagate techs (via email) for a known good copy of the firmware update, but they do not answer my requests for such.
    The Seagate techs recommended that I restore the NAS with a factory reset. That caused plenty of problems, as their is no mac software to recover the factory reset 'key' from the device (need device MAC, and I presume some sort of hashing key stored on the device). So, I had to cart the drive over to my friends house, and have him attempt the restore. After some initial confusion regarding the MAC address, we were able to successfully restore the device to it's factory settings.
    Note: Before attempting the factory reset, my friend attempted to mount the SMB shares (on the NAS), using his Mac running 10.6.5. He encountered the same problems I encountered. When he tried using his Windows-NT (through VMFusionWare emulation) *he WAS able to mount the shares*. O.k. This must be a Mac OS issue, and not a Seagate NAS issue. - Now that the drive has been restored to factory defaults, it's pretty much empty (some folders, but no data). Default admin/admin username/password are in place.
    I'm not sure which, if any of my most recent software updates may have introduced changes to smb/samba, so I tried mounting the device using other services. It's capable of FTP and NFS as well as CIFS/SMB.
    I tried to create an NFS mount. I tried using two different methods (an application called NFS Manager and the 'Connect to Server' method built into the Mac. Both methods failed to establish a nfs mount to the server. No login errors were noted, but no mount points were created in /Volumes, and no folders appeared on the desktop.
    I tried to connect via FTP, that didn't work either (using an my Transmit client). I'm certainly striking out with this drive. My Mac will not mount the shares/folders. I tried FTP (to 10.0.1.2 as admin) using Transmit application (on port 21). Transmit reported "Could not retrieve file listing for “/Public”. Server said: OOPS: Child died Error -162: Port failed". Connectivity protocols of CIFS, NFS and FTP (on port 21) are enabled on the NAS and the /Public share.
    *When I attempt to connect using the Connect to Server method (See Apple's 'Go' menu in the Finder), I met with sucess!* ftp://10.0.1.2/Public connect attempt resulted in two pop ups. One of them said 'connecting', the other said something about "'NetAuthAgent' (I didn't write it down) wants permission to access your confidential keychain data" Presumably, this was the authentication request. I said 'Always allow'. A folder appeared on my desktop and a finder window opened showing the contents of that folder. Unfortunately, the share is 'read only'; even when I attempt to authenticate as a specific user.
    Note: I don't think FTP attempts to index the mounted shares.
    Prior to the factory reset, I was able to connect to the shares using the Seagate's 'Global Access' web based ftp service. Now I cannot connect through the Global Access page.
    Below are 'Console' entries and a listing of my /Volumes directory. These may help resolve the issue. I deleted some entries (those I felt were unrelated to the issue). I left in stuff that's been bothering me.
    _*Can anyone help me reestablish SMB connectivity with my NAS-110?*_
    - Robert Vaessen
    'Console: All messages'
    12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
    12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
    12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
    12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
    12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
    12/16/10 00:11:16 BlackArmor Discovery[65267] got netServiceBrowser:didFindService:moreComing: event for <NSNetService 0x517a80> local. blackarmor1dinfo.udp. BA-22B9C2
    12/16/10 00:11:16 BlackArmor Discovery[65267] inserted new net service object for BA-22B9C2:
    "BA-22B9C2" = 1;
    12/16/10 00:11:16 mDNSResponder[23] Bad service type in BA-22B9C2.blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
    12/16/10 00:11:16 BlackArmor Discovery[65267] Added 1 drive table objects to the servicesToInsertArray.
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
    12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.307 ms
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.216 ms
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.216 ms
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.286 ms
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
    12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
    12/16/10 00:11:34 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Download', from '//%20;[email protected]/Download', dead
    12/16/10 00:11:34 mds[22627] (Error) DiskStore: Unable to create/find index location
    12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
    12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.356 ms
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.209 ms
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.237 ms
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.209 ms
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
    12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
    12/16/10 00:31:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
    12/16/10 00:31:39 mds[22627] (Error) DiskStore: Unable to create/find index location
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.271 ms
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.257 ms
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.197 ms
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.205 ms
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
    12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
    12/16/10 00:48:41 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
    12/16/10 00:48:41 mds[22627] (Error) DiskStore: Unable to create/find index location
    12/16/10 00:51:17 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
    12/16/10 00:51:18 mds[22627] (Error) DiskStore: Unable to create/find index location
    12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
    12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
    12/16/10 00:54:24 cupsd[65930] sandbox cache error: database is locked
    12/16/10 01:00:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
    12/16/10 01:01:06 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
    12/16/10 01:02:02 _lp[66035] audit warning: expired /var/audit/20101215210444.20101215231614
    12/16/10 01:02:02 _lp[66034] audit warning: closefile /var/audit/20101216055051.20101216080202
    12/16/10 01:09:56 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
    12/16/10 01:09:56 mds[22627] (Error) DiskStore: Unable to create/find index location
    12/16/10 01:10:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
    12/16/10 01:11:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
    12/16/10 01:11:15 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:12:09 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:12:13 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:12:29 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
    12/16/10 01:12:44 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
    12/16/10 01:15:05 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[66174 ] No valid tickets, timing out
    12/16/10 01:15:53 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:15:54 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:15:56 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:17:05 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:19:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-1', from '//[email protected]/Public', dead
    12/16/10 01:22:38 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-2', from '//[email protected]/Public', dead
    12/16/10 01:23:21 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:26 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
    12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
    12/16/10 01:24:03 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:47:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-3', from '//[email protected]/Public', dead
    12/16/10 01:47:13 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-3
    12/16/10 01:50:38 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:51:45 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
    12/16/10 01:51:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
    12/16/10 01:52:03 authexec[67020] executing /usr/sbin/automount
    12/16/10 01:52:39 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:52:47 com.apple.launchd.peruser.505[150] (com.apple.AddressBook.abd) The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0x1284283].com.apple.AddressBook.abd
    12/16/10 01:53:10 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
    12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
    12/16/10 02:00:50 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 02:00:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
    12/16/10 02:01:01 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-4', from '//[email protected]/Public', dead
    12/16/10 02:11:28 GrowlHelperApp[328] Transmit registered
    12/16/10 02:12:07 Firewall[101] Transmit is listening from 10.0.1.3:59918 proto=6
    12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59929 proto=6
    12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59930 proto=6
    12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59937 proto=6
    12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59938 proto=6
    12/16/10 02:12:33 servernotifyd[402] token expired
    12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59947 proto=6
    12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59948 proto=6
    12/16/10 02:12:45 Firewall[101] Transmit is listening from 10.0.1.3:59961 proto=6
    12/16/10 02:12:48 servernotifyd[402] Fetching new token
    12/16/10 02:12:48 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-5', from '//[email protected]/Public', dead
    12/16/10 02:12:49 servernotifyd[402] Completed token request
    12/16/10 02:12:49 servernotifyd[402] Subscription request completed
    12/16/10 02:15:20 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-6', from '//[email protected]/Public', dead
    12/16/10 02:15:20 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-6
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.347 ms
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.264 ms
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.232 ms
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.236 ms
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
    12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
    12/16/10 02:20:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-7', from '//%20;%[email protected]/Public', dead
    12/16/10 03:07:28 Firewall[101] Transmit is listening from 10.0.1.3:60607 proto=6
    12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60611 proto=6
    12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60612 proto=6
    12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60614 proto=6
    12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60615 proto=6
    12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60619 proto=6
    12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60620 proto=6
    12/16/10 03:08:04 Firewall[101] Transmit is listening from 10.0.1.3:60622 proto=6
    12/16/10 03:11:26 Firewall[101] Transmit is listening from 10.0.1.3:60649 proto=6
    12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60651 proto=6
    12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60652 proto=6
    12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60654 proto=6
    12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60655 proto=6
    12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60661 proto=6
    12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60662 proto=6
    12/16/10 03:12:02 Firewall[101] Transmit is listening from 10.0.1.3:60667 proto=6
    12/16/10 03:12:02 sysadmin[69677] audit warning: expired /var/audit/20101215231614.20101216012742
    12/16/10 03:12:02 sysadmin[69675] audit warning: closefile /var/audit/20101216080202.20101216101202
    12/16/10 03:18:40 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
    12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60739 proto=6
    12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:43968 to port 60739 proto=6
    12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
    12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
    12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60741 proto=6
    12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:34565 to port 60741 proto=6
    12/16/10 03:19:05 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60745 proto=6
    12/16/10 03:19:05 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:36662 to port 60745 proto=6
    12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60785 proto=6
    12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:49839 to port 60785 proto=6
    12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60787 proto=6
    12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:47180 to port 60787 proto=6
    12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
    12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
    'Cosole: samba log.nmbd' (Same entry repeated numerous times)
    [2010/12/16 04:22:10, 1, pid=118] /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdincomingdgrams.c:process_resetbrowser(735)
    processresetbrowser: received diagnostic browser reset request from BA-22B9C2<00> IP 10.0.1.2 state=0x2
    'Console: samba log.sndb' (note the dates)
    [2010/11/11 18:33:43, 0] /SourceCache/samba/samba-235.4/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/11/24 04:11:15, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/11/24 10:47:01, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/11/29 10:48:44, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/12/08 12:29:58, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
    [2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
    [2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
    [2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
    [2010/12/09 09:59:02, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
    smbd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    'Listing of the /Volumes directory'
    drwxrwxrwt@ 20 root admin 680 Dec 16 03:29 .
    drwxrwxr-x 44 root admin 1564 Nov 27 12:19 ..
    drwxrwxr-x 44 root admin 1564 Nov 27 12:19 Clone
    lrwxr-xr-x 1 root admin 1 Dec 8 04:35 Macintosh HD -> /
    drwx------ 1 rvaessen rvaessen 16384 Jan 1 1980 NO NAME
    dr-xr-xr-x 2 root rvaessen 1 Dec 16 01:15 Public
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:19 Public-1
    dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-10
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:22 Public-2
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:47 Public-3
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:01 Public-4
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:12 Public-5
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:15 Public-6
    drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:20 Public-7
    dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-8
    dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-9
    drwxr-xr-x@ 17 rvaessen rvaessen 646 Nov 11 18:12 Robert Vaessen’s iPod
    drwxrwxr-x 15 sysadmin staff 578 Nov 6 2009 Time Machine Prime
    drwxrwxrwx 1 rvaessen rvaessen 4096 Dec 7 17:31 nuvi
    drwx------ 1 rvaessen rvaessen 2048 Aug 16 14:52 rvaessen

    O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
    I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
    I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
    This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
    I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

  • Copy file from SMB share to Desktop permissions

    I have connected to a SMB share point (Windows Server)and copy a file to my desktop (Mac OS X 10.6.4).
    The file on my desktop shows I have the read and write access, however, everyone has no access.
    I could not get the system administrator to change on the server side. Is it possible to make any changes from my machine to make at lease every has read only access?
    Thanks in advance.

    I downloaded D2KWUtil from the link suggested by you. It has very nice example demo form. But the documentation provided says following
    Using D2KWUTIL in Web Deployed Applications
    The use of this library is not supported with Web deployed applications.
    In a web deployment scenario not all functions within D2KWUTIL will work. Any function that interacts with the User Interface (such as those in the WIN_API_DIALOG package) will fail.
    Any interaction with the O/S by other functions will all be executed on the NT server and will act within, or return information pertinant to, the environment on that machine. For instance GET_COMPUTER_NAME will return the Server’s name, not the name of the computer that the Client browser is running on. Likewise COPY_FILE will copy files in the Forms Server not on the Client.
    Functions such as those in WIN_API_BITOP will continue to work without change.
    so this will not work in web deployed application.
    Any other suggestion?
    Thanks

  • Share one iTunes library on a SMB share between PC & Mac

    Hi,
    Is there anyway I can share one iTunes library and the music files on a SMB share between a PC and a Mac? I assume there would be a problem with how the Mac and PC assign network drives differently would be an issue, or is there a way around this?
    At the moment I'm only sharing the music files on the SMB share but with separately iTunes library on the PC and Mac.

    I have itunes match. its good but its not perfect. it downloads wrong versions of songs. for example it downloads the censored version of many of my songs. plus it doesnt do podcasts, movies, tvshows, books.
    plus it doesnt show my smart playlists in the same track order as on my computer. its good but it has bugs and shortcomings.
    thanks for the suggestion but i'd like to try the way i initially posted about.

  • How to use smb share for home directory with AD account

    I have extended the schema of our AD and bound a macbook pro running 10.6.8 to the domain. AD users are able to logon, and if I select the option to use their AD homedirectory attribute then this smb share is used as a network drive. My question is though, I need users to logon to MAC using a different smb share for their home drive than the path set in the home directory attribute. Does anyone know how I can achieve this?
    Cheers
    Paul.

    But this method cannot use Regular Expression because my searching target is more than one line.Yes it can!
    Like you said, first you list all the files in the folder.
    For each file, use a BufferedReader to read the first lines, then you may use a StringBuffer to append the lines into it (don't forget to append the '\n' to each line).
    Finally, compile your pattern ( "^November.*\nDecember" ) with the DOTALL flag,
    verify that the string (from StringBuffer) matches the pattern and there you have it!

  • Problems saving to an SMB share using 10.8

    Issue happens in CS5 after Mountain Lion Upgrade 10.8
    when using CS5 to save files via a SMB connection to a Windows Server the following error is displayed "could not save filename due to a program error"
    however file save functionality in other programs / finder succeeds as expected with no issue.

    Branched this out to a new discussion.  Which Adobe application are you trying to save to the SMB share from?

  • Can I Create A Symbolic Link to folders stored on an SMB Share folder?

    Hello,
    I am very new to Unix and was hoping that someone could point me in the right direction with regards to Symbolic links and an SMB share folder ....
    Have purchased an ext. LAN Drive enclosure (http://www.macpower.com.tw/products/hdd3/pleiades/pd_usblan) which connects to my wireless router via ethernet like my G5 (main Mac) - our iBook connects via Airport. I have copied all my general documents/files to the SMB share folder on the ext. drive so that I can access them from the G5 and also the iBook.
    However I'd also like to be able to store my actual Mail folder (/Users/Mark/Library/Mail/), , Safari folder (/Users/Mark/Library/Safari) + my Address Book and other folders sitting in the Application Support folder on my SMB share so all important docs/folders are in the one place. I've tried storing these folders on the SMB share and putting an Alias to these back in Users/Mark/Library/Mail etc but of course an Alias doesn't work.
    Question 1: Can I create a symbolic link to these files if these are stored on an SMB share folder? If so, could you please tell me exactly what I'd need to type into Terminal? My SMB Share path is smb://STORAGE-XXXX/MARK
    I have copied my iPhoto library and iTunes library to the SMB share and are working fine.
    Question 2: Is it possible/worth attempting to move my whole home folder to the SMB share folder? Ideally, I'd like to be able to access my Mail from the iBook as well. If I could log into either the G5 or the iBook and access my latest Mail, Address Book and other Application Settings, that would be perfect. Would this be possible?
    Thanks
    Mark.
    Dual 1.8GHz G5 (Rev.B), 2Gig RAM, 9600XT   Mac OS X (10.4)  

    Dear Mark,
    Yes you can. The command to create a link will look something like this:
    $ ln -s thisFolder /Users/mark/thatFolder
    I did this while I was hosting a microsoft based game. This put all of the players into a common directory.
    SMB just resolved the link and everything worked fine.
    However, as I understand it, some other applications do NOT work very well with links. As I have NOT tried it with other applications, I fear I can be of NO help to you in this matter.
    The only way to find out which applications work with links is to try them and see what happens.
    Best of luck,
    Kurt

Maybe you are looking for

  • Problem with my clock

    I've updated my 3GS yesterday to 4.2.1 and have now problems with the clock. My iPhone is still in the German summer time. Synchronising again this morning didn't solve the problem. Well done Apple, this caused a morning in unnecessary rush this morn

  • I seen Java ?

    Jan 28 I was going to download Air and I seen Java - Is Adobe Air, Flash Player and Shockwave void of the Java Virus and Java Infection ? But is Java script the Java with the Problem or Java scipt prograimmg ? I wonder because I had problems download

  • Windows 8.1 fresh profile every logon

    Hello, How do I create a fresh profile everytime I  logon to a Windows 8.1 system. I have a Shared system that has One Local Account that is used for OutSide users when they visit. I need the Profile to be Clean everytime it is rebooted so I know pre

  • Fiscal year entry should be present year.

    Hi All,            I created one Report in Query designer, input Variable is fiscal year. Info cube data is there up to 2010, When i give input value 2006 - 2010 working fine. if i give 2006-2011 also executing fine, but 2011 fiscal year data is not

  • Flash to air package question

    Hi folks, I hope someone can help point me in the right direction. I have a flash application that one menu pulls in through links, mutiple swfs. So if I wanted to package this, from what I see I can use air and create the swf files as dependencies (