Slowmotion timeline for MPEG when changing to 64 bits system

I recently changed to a 64 bits system to speed up processes.
From that moment onwards my MPEG file comming from the Sanyo Xacti change into a slow motion in the timeline with normal sound (reaching upto the middle of the film fragment.)
The files comming from the panasonic camera are normal.
I did not have the problem when I was using the 32 bit system.
Can anyone tell me what is happening and what I need to do to get it back to normal again?

Hi I'm back. Project is done. Great success.
So now I started to work on solving the problem.
Started from scratch  with a blanc C drive, Installed only windows 7 and premiere CS4, no more.
Guess what. I still had my old slow motion movie.
Disabled all the codecs that were on the computer and nothing changed.
Went on the internet and looked for the latest Premiere CS4 update.
Installed that update
and the problem was solved.
The update that I installed was: PremierePro-4.0.1-mul-AdobeUpdate.
Funny thing is that I had installed that update on the system before I started from scratch as well, but then it did not work.
Now I need to take care that I do not mess it up again.
Thanks for the help.

Similar Messages

  • Maintenance view event for validation when changing data

    Hi All,
    I have a maintenance view on a table that should validate some fields during user input.
    I am using event 05 'Creating a new entry' to validate fields when user creates new entry in the table. That works fine.
    I would like to have the same validations happening when the user changes fields of records already existing in the database. I tried to use event 01 'Before saving the data in the database' but the problem with this is that user can change many fields of many records before clicking 'Save'. I would like to have the error raised for incorrect entry already after the change.
    So far I could not find an event to do this but only by changing the code itself. The problem with that is whenever the code is regenerated the custom part is lost.
    Is there an event I can use that would help me achieve this?
    Thanks in advance.

    Hi Abhishek,
    I tried event 21, I`m playing around with that since that`s the only one triggered when I press Enter.
    The problem with this is that
    - the check runs when you press enter, so you can still change many fields of many records (one step maintenance) before the validation runs
    - you can`t raise an error message, because only the key fields will be input ready, the non-key fields will be readonly
    The way I currently handle is I undo the changes in 21 (get previous field values from TOTAL) and raise an information message i/o an error informing user to check the entry.
    What I`m looking for is an event that will raise a message and set focus on the incorrect field (if there`s one such).

  • BADI or USER EXIT for MIGO when changing order number

    Hi experts, I'm looking for a BADI or USER EXIT in Tx. MIGO that is triggered after pushing ENTER when you change the order number. What I need to do is to propose the movement type depending on the order data. Thanks.

    Not sure but you can try in BADi MB_DOCUMENT_BADI menthod:
    MB_DOCUMENT_UPDATE

  • Is there any userexit OR BADI  for MIR7 WHEN change number of PO

    I know I can use badi  NVOICE_UPDATE- CHANGE_BEFORE_UPDATE method. to check PO's number when
    I save .
    I want to find an exit or badi to implement when I change number of PO, and  type enter  to  check the number .How can I do ??

    Hi,
    Please check this thread for the procedure to find the BADI for a transaction
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1276392,00.html#
    Or
    You goto se24 and specify the class CL_EXITHANDLER and in that double click on GET_INSTANCE method in that put a break point on the line 
    CALL METHOD cl_exithandler=>get_class_name_by_interface
    and run you transaction... for almost every action you will get this method trigger and in that check the exit name... And that's the BADI for the interaction made in that transactation.
    Please go through this link for Finding BADI using class CL_EXITHANDLER in detail.
    [Finding BADI|http://abapreports.blogspot.com/2008/06/badi-finding-in-abap.html]
    Hope this would help you.
    Good luck
    Narin
    Edited by: Narin Nandivada on Aug 19, 2008 5:30 PM

  • Automatic output determination for SO when changes done

    Hi
    I created one output type ZNSO for sales order and created access sequence and condition record for Order Type in VV11. Now, I am able get that output type ZNSO in messages automatically while creating SO (VA01) and posting an IDoc.
    But, my requirement is, If I change the sales order (VA02) that should post an IDoc automatically (User doesn't want to enter output type manually).
    How can I achieve this. Plz help me on this.

    Hi
    In NACE, Select the output type.
    There in GENERAL tab,
    CHECK on MULTIPLE ISSUING,
    Fill Program as FM06AEND and
    Form routine as CHANGE_FLAG.
    BR
    Asik.

  • Changing to 64 bit system

    Downloaded CS6 Design and Web Premium from Techsoup and put on DVD; changed to Windows 7 64 from 32 and now cannot seem to reload CS6. Is there a way to download again and use the License Key already provided? the Login ID at adobe.subscribenet.com does not work.

    You can download the trial installer directly. Find the appropriate link below.
    You must be on a trial download page to use the links, otherwise you get an error message.
    For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us before pasting the link into the address bar.
    http://trials2.adobe.com/AdobeProducts/DSST/CS6/win32/DesignWebPremium_CS6_LS16.7z
    http://trials2.adobe.com/AdobeProducts/DSST/CS6/win32/DesignWebPremium_CS6_LS16.exe 
    One link(.7z archive) is for actual download and second is the extractor(.exe)
    Download both the files in same location and then run .exe file in order to extract actual CS6.

  • Correct install order for CS4 and CS5 on 32-bit system?

    I have CS5 (Master Collection) to install on a 32-bit Windows XP system.
    As the CS5 versions of both Premier Pro and After Effects require a 64-bit edition of Windows, included in the disc set are CS4 versions of those programs for this purpose.
    What, if any, is the preferred install order? I am inclined to install the CS4's first, assuming the CS5 install will overwrite/update some shared components.
    Should I install the CS4's first, CS5 first, or will it make no difference?

    The right procedure is installation of CS4 first then CS5.

  • SPL block when changing the Address manually at Sales order level

    Hello all,  I hope every one doing well
    I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
    I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with  as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
    I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
    Please let me know  how to resolve it.
    Is it related to configuration  if yes how  ? pr
    do we  have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
    or
    do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
    manually at sales order level ?
    Thanks in Advance
    NVR

    hello Sameer,
    1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
    2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
    3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
    - yes
    What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party  ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
    please let me know if any once come across this sistuation..
    Thanks in advance
    NVR

  • Hi I can't update my apps when I try to update it asks for password when used it goes back to update. I think I'm not alone and have tried changing date switching off signing out and in and rebooting. Is there a solution or do I need to take it in?

    I can't update my apps each time it asks for password when entered it goes straight back to update. I don't think I am alone in this. I have tried changing the date, rebooting, switching off and on signing out and nothing works. Does anyone know of a solution or will I have to take it to an apple shop. My misses has no trouble with her updates, they are both on iOS 6. Hope someone can help.

    Tried that just said cant connect to iTunes Store which was different.

  • I've chosen "never" on my screen saver however the screen saver still comes on and there is no way for me to change it, how do i change it? I don't wish to have a screen saver on when I'm watching TV or movies on my laptop

    I've chosen "never" on my screen saver however the screen saver still comes on and there is no way for me to change it, how do i change it? I don't wish to have a screen saver on when I'm watching TV or movies on my laptop.

    Step one is to log into a newly created admin user account and see if the problem persists. Also,

  • BW error:  "invalid call sequence for interface when recording changes"

    I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW.  Any ideas on how to resolve this error?
    Thanks.

    I already tried that.  This is what's happening..  When I get this error, if I try again it will activate and gets collected into a transport.  I moved this transport to our QA system.  As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource   xxxxx must be activated.   Before the excecution of the infopackage, the datasource is in "Active version executable".   After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable".   I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
    I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
    Any help?
    Thanks.

  • Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password.  Even with an Admin account you must have a password to install software.
    If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal.  When the Terminal window opens, at the cursor type exactly:
    resetpassword
    and press Enter.  When the Reset Password window opens, select the internal hard drive, and then the user account.  Type a new password twice, leave the Hint blank, and then Save.  Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
    Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
    And you have a new password for your account.

  • When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"?  While this message apears no back-up occurs.  Is there a setting I need to change?

    When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"?  While this message apears no back-up occurs.  Is there a setting I need to change?

    You can't do a backup of icloud to an external drive.  In fact, does your post have anything to do with icloud (you're in the icloud forum)?
    What kind of "system backup" are you doing?  Are you using Time Machine?

  • Can I set calender invite to set at the same time, even when changing time zone. for example I am in the UK have set a meeting for 10am in NYC for weds, but when getting to NYC it is still set at 10am and doen't adjust to time zone?

    Can I set my Calendar invites on a IOS 7 device to set at the same time, even when changing time zones. For example I am in the UK and need to set a meeting for 10am NYC time on Wednesday, but when I reach NYC I don't want the time zones to adjust which will then adjust my meeting I set in the UK to NYC time.

    Here are the individual files for those that fear the my other file of virii.
    Attachments:
    HASP.vi ‏88 KB
    File Setup.vi ‏11 KB
    Gather and Output.vi ‏149 KB

  • Quick way to change "Optimize for" setting when "mirror displays" is on?

    Is there a quick way to change "Optimize for" setting when "mirror displays" is on?
    I have two displays on my Mac Mini for totally different areas; I can't see the first monitor when I'm on the second. One is 1280x1024, one is 1920x1200. As I switch fairly often I'm wondering if there is a built-in or 3rd-party-utility way to quickly toggle the "optimize for" setting that is under "System Preferences" -> "Displays" -> "Display" tab -> "Optimize for:" dropdown box.
    As Apple sadly doesn't make a all-in-one keyboard / mouse - need one as one of the monitors is used for just a very comfy chair, so keyboard is on my lap - I'm using an Lenovo ThinkPad USB Travel Keyboard, model SK-8855, and some key cobinations, esp. with function keys, seem not to work on it. So something from the desktop context menu or that allows you to set the hotkey would be preferable.
    Thanks for any help,
    -DJBC

    I'm thinking that, Display Menu from the Mac App Store will help.

Maybe you are looking for