Slowness in server-side mailboxes

I really like Mail.app a lot, but I'm finding it to be very slow in dealing with high-capacity IMAP mailboxes, to the point where it's becoming a real problem.
Is there anything I might try to speed it up? Would I be better served with another app such as Thunderbird or Entourage?

David,
The discussion in the Topic at the link below may be of interest:
http://discussions.apple.com/thread.jspa?messageID=1893164&#1893164
Let me know what you think.
Ernie

Similar Messages

User mailboxes have more server-side rule options then shared mailboxes?

I was hoping to set up some server-side rules to keep a shared mailbox clean. The goal was to have some rules to move incoming messages to specific folders based off words in the subject. I opened the shared mailbox in OWA and found the action
of moving the message to a folder was not available. At first I figured that's an action that's only available in a client-side rule. However, I then found that in my user mailbox that action is available server-side. It would appear there
are a number of other action that are available server side to user but not shared mailboxes.
Anybody else notice this? Is this a bug?
Single Exchange 2013 SP1 server - nothing fancy.

Hi,
I have a test in my environment using Exchange 2013. We can use two methods to create rules in OWA. When I open shared mailbox via OWA to create rules, only one way is possible. I recommend you use this way to create rules in OWA and check the result. Here
is the detailed steps for your reference.
Click Setting icon (on the right corner) -> Options -> organize email -> New
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

MS CRM 2105 server side synchronization

Hello ,
My online CRM is integrated with server side synchronization. The incoming and outgoing emails are working fine before.
But yesterday onwards the incoming emails are not receiving in to CRM. But I see the emails are exists in the exchange server.
I have tried with test and enable the Mailbox. From yesterday onward the status is still showing the
"the email configuration test is in progress".
I have a plugin which was triggering on email creation but in post operation, I have disabled the steps also.
But still the issue is not fixed.
Any help will be appreciated.
Regards,
Priya

Hello,
Enable tracing it will give you pointer, what is wrong.
You could also refer: https://technet.microsoft.com/en-us/library/dn850386.aspx?f=255&MSPPError=-2147217396
http://gustafwesterlund.blogspot.in/2014/04/server-side-sync-trouble-shooting.html
Microsoft Dynamics CRM Training|Our Blog |
Follow US |
Our Facebook Page |
Microsoft Dynamics CRM 2011 Application Design
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

Displaying server-side include in DW8

Sorry if this has been asked before? I did search and
couldn't find it (this site is painfully slow and searching is
worse)
I am trying to figure out how to make DW8 show my server-side
include files in the design view. My site uses SSI for all headers
and footers, so every page has at least 2 SSI's. They show up as
the SSI mark on the page, but not the code or graphical
representation of what is in the SSI. I need to have that code
snipet show up in my design view. The only way I have been able to
figure out how to do it, is to reinsert the SSI again from the
menu, and then delete it. Doing it that way, the original ssi that
is listed on the page will display graphicly in the design view.
I do have the option in the preferences - Invisible Elements
- Server-Side includes: and the check box is checked / enabled.
If I could, while I'm here, one other question. I have DW
code rewriting turned on, and it shows me each time I open a file,
what corrections it has made. But if I save the file, and then open
it again, it shows me the exact same corrections being done again.
Is there a trick to make DW8 save the corrections it automatically
makes to the files?
many thanks in advance.

> I know that there were major changes between 4 and 8.
One of which was tightening the tolerance for bad code. CS3
is very strict
about displaying proper code.
However, your fragments below look OK.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mmdlcab" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
bregent
> Do any of your included files include html, head or body
tags? If so,
> that's
> the problem. Having those creates invalid html which DW
will not
> render.
>
> Thats a great thought, but I just checked, and no, none
of those tags are
> in
> the files. I'll see if I can attach the code for the 2
files and see if
> that
> helps any. The header file does have my menu system
pasted into the text
> of
> the include file, but that has not caused problems
previously. FWIW, this
> worked fine in DW4 which is what I upgraded from. In
version 4, the
> headers
> and footers showed up fine in desgin view. I know that
there were major
> changes between 4 and 8.
>
> Header include file:
> ----------------------------
> <table border="0" align="center" width="750"
height="110">
> <tr>
> <td><a href="/index2.html"><img
src="/images/color_logo.gif"
> width="110"
> height="107" alt="MMDL Logo" border="0"
/></a></td>
> <td align="center" valign="middle"><a
href="/index2.html"><img
> src="/images/header4.gif" width="450" height="110"
border="0" alt="MMDL -
> The
> worlds largest steel tip dart league"
/></a></td>
> <td align="center" valign="middle"><a
href="testpage.html"></a><a
> href="
http://www.dmisports.com/darts_main.html"><img
> src="/images/dmilogo_small.gif" alt="DMI Sports"
width="110" height="77"
> border="0" longdesc="
http://www.dmisports.com"
/><br />
> 
> </a><a href="
http://www.mmdl.org/dmi_flyer.pdf">League
Board </a></td>
> </tr>
> </table>
> <script language="JavaScript"
> type="text/javascript">
> var navVer = navigator.appVersion;
> if(navVer.substr(0,3) >= 4)
> if((navigator.appName=="Netscape") &&
(parseInt(navigator.appVersion)==4))
> {
> document.write('<' + 'script language="JavaScript"
type="text/javascript"
> src="
http://www.mmdl.org/dmbmenu/nsmenu.js"><\/script\>');
> } else {
> document.write('<' + 'script language="JavaScript"
type="text/javascript"
> src="
http://www.mmdl.org/dmbmenu/iemenu.js"><\/script\>');
> }</script>
> <table border="0" width="550"
> height="110">
> -------------------------------------
> footer include file
> --------------------
> <table border="0" align="center">
> <tr>
> <td width="20" valign="top"
align="center"> </td>
> <td align="center" valign="middle" width="194">
> <div align="left"><a
href="mailto:[email protected]?subject=MMDL
> Darts.*..
> ">Comments? Email us</a></div>
> </td>
> <td align="center" valign="middle"
width="128"><a
> href="
http://www.mmdl.org/dmbmenu/textmenu.html">Text
> based menu</a></td>
> <td align="center" valign="middle"
width="223">© <SUP>SM</SUP>
> 2007
> Minute Man Dart League. All rights reserved.</td>
> </tr>
> </table>
> -----------------------
>
>
>
>

Server-side filtering to subfolder for all users (spamassassin)

Hello,
I am trying to integrate a 3rd-party spam filter/virus scanner, it is just spamassassin/amavisd-new running on a front-end box that adds an X-Spam-Flag: YES header to the message before passing it on. This works great on our current postfix/cyrus-imap system using individual cyrus sieve server side filters to look for the flag and move the message into the user's spam folder.
My question is how to do this in a universal way on OCS, I have been reading through the docs and think server-side filters are the answer, but I can't seem to find a way to set up a system-wide filter that will put the incoming message into the recipients' spam subfolder. Does anyone have any clues on this? I think the key here is to somehow be able to use the recipient name as a variable to pass as a parameter to the moveto action, but I can't see a way to do this. Any pointers would be appreciated.

You can do this in a single system wide rule, but it's undocumented and technically unsupported.
First of all, checking the spam-flag in a system side Deliver rule is straightforward:
<condition>
<attribute tag="xheader" param="X-Spam-Flag"/>
<operator caseSensitive="no" op="stringequal"/>
<operand>YES</operand>
</condition>
(Checking on the subject is OK too, if you rewrite it through SpamAssassin.)
Then to move to a folder, you'll need an external PL/SQL action since the full folder name will vary for each user:
<action>
<command tag="call"/>
<parameter>SpamCheck.moveMsg</parameter>
<parameter>parameter1</parameter>
<parameter>parameter2</parameter>
</action>
Then the tricky part is the Pl/SQL to do the move, using the undocumented es_ga.g_username variable. This is the only way to know which mailbox context you're currently in for the deliver event at the system level. Without this, you need a separate rule for every user. Here's the bare bones of a procedure that would do it.
procedure moveMsg(p_eventid in integer,
p_sessionid in integer,
p_msgobj in mail_message_obj,
myparam1 in varchar2,
myparam2 in varchar2,
p_status out number)
is
this_user varchar2(255);
mList MAIL_MESSAGE_LIST;
Begin
this_user := es_ga.g_username;
mList:=MAIL_MESSAGE_LIST(p_msgobj);
mail_folder.move_messages(p_sessionid, mList, '/' || es_ga.g_username || '/ServerMove');
end MoveToSpam;
You probably want to add some exception handling, etc. to that ;-) More info on the Pl/SQL API in general is in the Mail Application Dev Guide.

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

Server-Side Sychronization has stopped

Hi,
We have setup a setup of CRM Queues (mailed enabled) with Dynamics CRM 2013 using Server-Side Synchronization. Everything was working fine until the password associated to the queue expired and we had to reset (about it 4 days later). When the
connection to Exchange was re-established we began receiving emails from that point on, but nothing for the period when the synchronization was broken (because CRM could not authenticate to Exchange).
So we have all these emails in Exchange, that we want to get processed and routed into CRM.
The only viable solution to this problem has been this blog - http://blogs.msdn.com/b/emeadcrmsupport/archive/2015/01/21/dynamics-crm-2013-server-side-synchronization-email-process-issue-after-disabled-mailbox.aspx - which looks like it will work.
Are there any other ways to solve this problem? I'm a little hesitant to go right to the database on this? When previously using the Email Router, once the connection was re-established, all the emails stored in Exchange would automatically route
to CRM.
Thanks - Greg.
Greg Thomas | http://lync.openjive.com

Greg,
It looks like this is a known issue. Check the following blog. It describes your symptoms, why it happens and how to resolve it.
http://blogs.msdn.com/b/emeadcrmsupport/archive/2015/01/21/dynamics-crm-2013-server-side-synchronization-email-process-issue-after-disabled-mailbox.aspx
Jason Peterson

Server-side connection pooling for clients in different VM's

We have a need to centeralize our connection pool manger.
Is there a server-side connection pooling manger product to allow multiple clients running in different VM's to connect to and share connection objects to the same Database?
e.g. An applet, and a swing and a servlet/web app application all running in different VM's will connect to this central connection pool manager and share connection objects to the same DB.
We are using connection pooling for all of our applications but each application is maintaining its own connection pool and it is becomming a nightmare to manage and configure each one.
Also, we have to have at a miniumum one connection open per application to access the database regardless of wether we are using connection pool or not. This means that 100 apps(running in different VM's) will use at minimum 100 connections... where all of these 100 apps will do just fine with just 10-15 connections.
while back we used T3 server but can't find this product on BEA web site any more.
does jdbc 2.2 or 3.0 have any server side pool management specs outlined?
Please HELP as we can't afford anymore licensing fees for our company.
oh.. We can't open and close connections on each query as they will be slow.
any suggestions greatly appreciated.

if i understand you question, i don't think this is possible, since the Connection interface (and basically all of the related jdbc interfaces) aren't Serializable.. so they can't be sent over the wire to your client(s).
However, you could feasibly write some server side connection pool, and some server side facade which will allow clients to submit queries (either SQL String's or however you want to do it - obviously a more elegant solution involves a series of classes which dynamically create sql based on query criteria), then the server can grab a connection, execute the query, cycle through the results and populate some result object of your creation and send that back over the wire to your client(s).
.

JDBC JApplet server-side transaction?

Is it possible to make a JApplet do a server-side transaction to SQL server?
When accessing an Applet via a web browser, the sql transaction is client side right? Making it slower?

Jepot wrote:
What i mean is when an applet is being run or opened, the pc or computer who is opening it is the one who will be requesting for a connection to the SQL server. What i want to know is if it is possible to set transaction/connection local to the server or server side and not by the client.
Example scenario is i have a server which have a web server and a SQL server, it has an applet that reads sql data from the sql server and displays it. So when a client access the page that contains the applet, java (on the client side) will load the applet and will get sql data from the server, so by this method the applet is getting or transacting sql client-side.Well stop worrying about this. As I told already told you, you are mistaken about how this all works.
The SQL is always executed in SQL Server. Period. Applet or Servlet doesn't matter.
You shouldn't use JDBC code in an Applet for the reasons I gave before, the rest is just you inventing your own terminology.

Editing server-side Sieve via IMAP... does Messaging Server support RFC 5804?

The Sieve Addon for Thunderird https://addons.mozilla.org/en-us/thunderbird/addon/sieve/ (https://github.com/thsmi/sieve) mentions the sieve management protocol (RFC 5804) accessible over IMAP. I did not find any mention of this on the CommSuite Wiki, so I guess it is not supported at the moment... or just not published?
Apparently, most users of this addon use it in conjunction with Dovecot server which does support Sieve server-side filtering, and/or with projects like this to translate between client-side Mozilla filters and server-side Sieve filters: Mozilla filter to sieve converter | Free Communications software downloads at SourceForge.net
I am not sure yet if there is an addon to automatically replicate client-side rules onto the server-side rules as the users edit them in their GUI... but this would be the next logical step
//Jim

Hello, thanks for the update despite the lack of forbidden details.. at least, the feature is in the pipeline
Could you please clarify: did I understand correctly that the managesieve RFC and implementation by the Messaging Server are not compatible with the user's Sieve rules as maintained by Convergence (as of today)? I did not really dig deep into the RFC definition, but does it define that the IMAP server maintains one big script only (and not something like an IMAP mailbox with numerous small scripts, possibly ordered by some attribute)?
Conversely, would the Messaging Server be able to use large singular sieve scripts pushed by an email client, and would these be useless or invisible to Convergence client?
Thanks.
//Jim

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How could I clear all my data(bookmarks) on Mozilla server side in new version of Sync (Firefox Account)?)

Problem is the same as https://support.mozilla.org/en-US/questions/1000745?esab=a&as=aaq
Also, there was no solution has been given in discussion.
So, problem that noone could delete all data which have been synced with new Firefox account services.
I've disconnected all my devices from previous (old) firefox sync system (which worked perfectly on several devices), after that i gone on link https://account.services.mozilla.com/ and deleted all my sensitive data.
After I've created firefox account in new firefox sync system ( https://accounts.firefox.com ), and all my data (bookmarks exactly) now present in browser twice.

I have a problem with over 12,000 unwanted bookmarks in my 4 PCs (all standard Mozilla bookmarks that have been replicated). So if I would like to purge my server side data. If I do this by deleting my Sync account can I re-use my same email address to re-open a "new" Sync account?

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

Contribute changing relative path for server-side include

I am using Contribute CS3, version 4.1, and my pages crash
every time a send a draft for review, because Contribute is
rewriting a relative URL in a server-side include.
The server-side include (before I send for review) reads:

After I edit other portions of the page and send the draft
for review, it reads:

Which results in the draft being unreadable.
Is there any way to tell Contribute not to monkey with this
URL? I have hunted, read the forums, checked the knowledge base,
and coming up empy.
Thanks in advance for any help you can provide!! I really
appreciate it!
-Nicholas

Answering my own question.
I researched this complete forum and with taking ideas from
different posts, I was able to figure this out. I thought I would
post it for anyone else needing to know the answer in one place:
Include tags must read:

(Include file is NOT a real HTML doc -- no tags in file
except for CSS, as it would be used if not using Contribute.)
No reference to .dwt needed nor Template created.
No Edit instance tags needed anywhere.
Contribute user navigates to page:
[Upper right corner] Click Choose...
[In my structure] User opens includes folder (double clicks)
User selects THE file (clicks OK)
User clicks on Edit Page button
(Text is now editable.)
User edits text.
User clicks on Publish button.
Worked for me several times trying.
- Janet

Needs a background webdynpro application running at the server side

Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
Anurag

Hi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag

Slowness in server-side mailboxes

Similar Messages

Maybe you are looking for