Slowness with Time Capsule

Ive had an Apple TV for about 1.5 years.  I have been using an Airport Extreme as my home router with Comcast High Speed interet, and they have worked great together.. The speed was flawless.. and neve had to wait more than 10 seconds to start playing a movie.
I just replaced my AE with a 2GB Time Capsule because my back up drive had broken.  Ever since my internet speed on Apple TV has gone to crap.  I use Itunes Radio alot, and now I can't get it to continuously stream.  I also use iTunes Match, and it constantly stops and starts while playing music.  As for movies, forget it... It takes forever to get it started, and when it does, it buffers every 3-5 minutes during the movie...
At first I thought it was because I was backing up all the time, so I turned off Auto-backup on my MacBook Pro.  No change..
Is the Time Capsule not as fast as an Airport Extreme?  I haven't changed anything on my ATV3... or my modem.  I leterally switched out the AE for the TC.. got my HD backed up.. and that's it..
Regular interent seems fine (on my computer and ipad).. but Apple TV gets stuck all the time..

Hi ejs71,
The Airport Extreme and Time Capsule have the same Wi-Fi specifications, see the first link for more details. Also, take a look at the second article which has some great tips that may resolve the issue.
Apple - Wi-Fi - Compare Wi-Fi base stations
http://www.apple.com/compare-wifi-models/
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Apple TV unexpectedly disconnects from the Wi-Fi network or signal strength is weak or fluctuates
Check for any obstructions and adjust the location of your router or Apple TV; also check for sources ofpotential interference.
Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
If after attempting the above steps, your Apple TV is still unable to connect to your Wi-Fi network:
Restart your Apple TV: Choose Settings > General > Restart.
If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and test again.
Good luck!
-Jason

Similar Messages

  • My Network gets slower with time capsule... why?

    I Buy a Time Capsule for only for use it as backup HDD in my work but after i install it and configure it the network gets slower but onli with the machines that have the gateway configured, because the machines that dont have internet connection (no gateway and no DHCP only static ip), they are fast as allways
    we use Windows Server enterprise 2008 r2 with ADSL connection and terminal server configured and a network domain on it.
    and the machines have windows 7 and xp.
    I hope someone know why this happened.
    thanks.

    And if you don't have luck on the SL forum then I'd recommend posting on the Airport forum. You can find that at:
    https://discussions.apple.com/community/wireless/airport

  • Watching movies with Apple TV slow with Time Capsule

    I recently got rid of my Linksys router and replaced it with a Time Capsule, it acts as my backup storage as well as my router.
    Ever since then, my apple TV is extremely slow when downloading movies. It used to take about 30 seconds to be able to watch the movie and now it's 1-4 hours.
    My network speeds are fine, I can do speed tests and get 5-10Mbit down, so I'm not entirely sure what is going on.

    Hello optize. Welcome to the Apple Discussions!
    I assume that you are using the new Time Capsule (TC) to stream movies to your Apple TV (ATV) ... correct?
    If so, to improve streaming performance, you may need to try some of the following to find what will work best for your network configuration.
    o If both the TC & ATV are wirelessly connected to each other, switch the radio mode to "802.11n only (5 GHz)."
    o If you must operate your wireless network in the 2.4 GHz radio band to support non-"n" clients, try a different radio channel.
    o Connect the TC & ATV by Ethernet.
    o Temporarily disable Time Machine backups from running when streaming movies.
    As you are probably already aware, the iTunes Store offers both standard definition (SD) and high definition (HD) video for rental and purchase. MPEG4-compressed 1,080p requires about 10 Mbps of throughput to stream without artifacts. As such, Apple’s SD and HD video would require between 2 and 5 Mbps for decent streaming over a network. A 802.11g network should top 20 Mbps in throughput, but could be lower speeds due to Wi-Fi interference. In contrast, a 802.11n network, with only n devices connected, can hit 90+ Mbps.

  • Wireless significantly slower with time capsule

    I have a 2T apple time capsule running latest firmware 7.6.4.  I have Cox cable and a 150 mb plan.  When I connect my iMac to the modem, I am consistently getting 175mb connections.  When I connect the TC, my speed over wireless drops to a 50mb connection.  I have restarted the TC with no effect at all on the speed.  I have attempted to restore the TC's settings through airport utility, but I just keep getting the "restore" window with the "spinning circle"--i.e. it ill not restore.  Any advice would be appreciated.  Thank you.  Also, I should add that the iMac is upstairs while the TC is downstairs.  I get a strong wireless signal.  I would assume download speeds will vary, but I wouldd not expect my speed to be 1/3 of what it should be.  Thanks again.

    I would expect exactly what you are getting.
    Wireless is not going to transfer real world speeds higher than about link speed divided by 3, maybe even 4.
    Find your link speed. Hold down the option key and click the wireless fan in the top menu area.
    Take the transmit rate and divide by 3..
    You should realise that wireless is limited by Apple to 130Mbps at 2.4ghz although in newer equipment you can achieve 217Mbps.
    For 5ghz the speed will be 450Mbps in the same room but drops off quickly.. the above shot is with the TC in the next room.. max link speed dropped from 450 to 162 as drop off at 5ghz is very rapid.

  • Wireless comm problem with time capsule or airport extreme using iMac G5

    I did buy a Time Capsule and an iMac 20" G5 January 2009...Installed all the components and created a wireless network...MacBook, iPhone and iPod Touch connected perfectly...iMac connected but started to drop communications with Time Capsule...Safari, iTunes and other internet-access programs had problems to connect 100% with the web...After reviewing all the post here and "testing/trying" several parameters, I found out that you need to define a WPA/WPA2 password protection with more than 13 characters...FYI, Time capsule is configured using 802.11n (b/g compatible)...

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

    I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

    You will need to start over on the setup of the Time Capsule as follows:
    Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
    Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
    Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
    Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule.  The Ethernet cable must remain connected at all times.
    Click the WiFi icon at the top of the Mac's screen
    Look for a setting of New AirPort Base Station
    Click on Time Capsule
    The example below shows an AirPort Express. You will see Time Capsule on your screen.
    That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
    Network Name..........Type in the exact name that the Netgear wireless is using
    Base Station.............Type in a name that you want to call the Time Capsule.  Use something short and simple. Mine is TC, for example
    Password..................Type in the exact password that the Netgear wireless requires
    Verify.........................Verify the Password again
    Click Next
    The setup wizard will configure everything for you automatically.  When you see the message of Setup Complete, click Done.
    That's it.  Now you have one big "extended" network.  Technically, this is called a "roaming" network.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

    Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
    Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
    I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme.  I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

    I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
    Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
    The keys to having a successful roaming network are as follows:
    The routers must be interconnected by Ethernet.
    Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
    The TC MUST be reconfigured as a bridge.
    Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
    The basic steps are:
    Power-down the Winstream.
    Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
    Connect the TC to the Winstream using an Ethernet cable.
    Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
    Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
    Connect your computer to the Winstream's Wi-Fi network.
    Run the AirPort Utility. select the TC, and then, select Edit.
    Go to the Network tab.
    Change the Router Mode option to: Off (Bridge Mode)
    Select the Wireless tab.
    Verify that the Network Mode option is set to: Create a wireless network
    For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
    For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
    For Wireless Password, enter the same password used by the Winstream.
    Select Update and allow the TC to restart.
    As far as your external HD, yes you should still be able to use it as before.

  • Can we share our photos in the family on different mac´s with Time Capsule?

    Can we share our photos in the family on different mac´s with Time Capsule?

    It depends on the size and number of photos you are sharing around.
    Nothing wrong with putting a copy of the photos on the TC if that works for you. Each person can access the photo just fine like that.
    I am not saying don't.. just beware of the risks so do it prudently..
    But if the library is too large, you will steal space on the TC that should be used for backups.. if all the computers in the network are backing up to it, don't use too much of the spare space.
    Better to buy a firewire drive (or USB but firewire 800 are much faster) and connect it to a computer that is regularly turned on. Share that drive to the network. It will then also be backed up correctly to the TC although again be careful of the amount of files, and still keep a straight copy backup somewhere else.
    I am recent convert so workflow on the Mac is not my forte.. so perhaps some of the wiser heads can also drop in and post a reply.

  • Backing up Mac HD with Time Capsule AND an external hard drive

    I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
    I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
    With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
    I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
    Thanks.

    Rheopaipo wrote:
    I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
    I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
    With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
    I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
    I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
    You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.)

  • Setting up new HP Laserjet CP1525nw wirelessly with Time Capsule

    Im having issues setting up my new HP Laser printer via wirelessly with Time Capsule. I have tried with the Wireless Client Setup
    Assistant but cannot get it to work. Any help or suggestions would be appreciated. Thanks

    I tried to get the CP1525nw set up on my computer here at the office and found, much to my chagrin, that the CP1525 is not supported under 10.7 and retroactively not supported under 10.6. The way that I have found to get around the issue is to connect it wirelessly via a static IP address and use a generic postscript driver. I'm hoping that they will release a driver to Apple soon, but until then, generic is the only way to go and I have not found any print quality issues.

  • Initial Time Machine Backup with Time Capsule

    Hello,
    I just started to back everything up with Time Capsule and Time Machine. The backup is 45 GB so it's going to take a while. Two questions:
    1. There is a Volume created on my Desktop called "Backup of [My Computer Name]". Is this supposed to happen?
    2. In the actual drive, there is a Sparse file, not the usual backups.backupdb folder that is created when attaching a drive via USB. Is this supposed to be like that as well?
    Thanks!

    Thank you for the response. I have a couple more questions.
    1. Is there a way to manually go through the files? I used to be able to when it was backing up locally through USB.
    2. If I change the folder name of the location of the Time Machine backups, do I have to start my backups all over again?
    Thanks!

  • How do you back up an external hard drive with time capsule?

    how do you back up an external hard drive with time capsule?

    Will time capsule back up the machine and the hard drive that is plugged into the machine?
    Yes, if the hard drive with the video files is formatted correctly for Mac
    On the Mac with the hard drive connected....click on the Time Machine "clock" icon at the top of the screen
    Click Time Machine Preferences
    Click Options
    Here you will see a list of items that have been excluded from backups
    Click the name of the hard drive to highlight it
    Click the - (minus) button at the bottom of the list to remove the hard drive from the list of excluded items
    The hard drive will now be backed up with your Mac on the next pass that Time Machine makes

  • Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Try Here  >  http://pondini.org/TM/Time_Capsule.html
    Perhaps P 2  >  Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

Maybe you are looking for