Slows down
I have an MBA with SSD. After using it for an hour, it slows down. T correct this, I have to restart, and it is back to speed. Any suggestions?
Thanks for that information. Check your Login Items at *System Preferences - Accounts - Login Items* if you have a lot of items starting when you turn on the computer that will slow it down. Another place you can check where your resources are going is Activity Monitor at *Applications - Utilities - Activity Monitor*, check to see if you have anything using up a lot of %CPU.
Similar Messages
-
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Timer Class not accurate and slows down my animation!?
Does anyknow how why my timer object is not accurate and why it slows down my animation that is also present on my GUI at the same time?
I have a timer in the form of 0.00 the left of the decimal point should represent a second but it doesnt, run my code and see for yourselves. below is my code if anyone can fix these 2 problems i will be very thankfull:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Shape;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
import java.sql.*;
import java.text.*;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel, coJLabel, shJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;
public JComboBox colourJComboBox, sizeJComboBox, shapeJComboBox, speedJComboBox;
private static Connection dbcon;
int temp=0;
private String[] col = { "Red", "Blue", "Green","Yellow","Orange","Black"};
private String[] shapeA = { "Normal Rectangle", "Normal Circle", "Normal Oval","BIG Rectangle", "BIG Circle","BIG Oval","small rectangle","small circle", "small oval"};
private String[] speed = { "Fast", "Normal", "Slow"};
public int checking;
static int flag, flagshape, flagspeed;
// creates and sets up a number of varibles to be used by the class
public long timeLimit = 0;
DecimalFormat timeDec = new DecimalFormat (":00");
public int age;
public String name, shapeChoice="Normal Rectangle(Never selected anything)", colourChoice="Black(Never selected anything)";
private Timer TimeNow;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
Random seed;
Shape shape;
Shape[] shapes = {new Rectangle2D.Double(50, 30, 75, 25),new Ellipse2D.Double(175, 125, 50, 50),new Ellipse2D.Double(90, 100, 75, 35),new Rectangle2D.Double(50, 30, 175, 125),new Ellipse2D.Double(175, 125, 125, 125),new Ellipse2D.Double(90, 100, 175, 135),new Rectangle2D.Double(50, 30, 55, 15),new Ellipse2D.Double(175, 125, 20,20),new Ellipse2D.Double(90, 100, 55, 15)};
//50, 30, 75, 25 change starting point here****************************************
public RT() // constructor method
seed = new Random();
shape = shapes[0];
//sets up the Timer
TimeNow = new Timer((1), new TimerListener());//++++++++++++++++++++++++++timer -17
createUserInterface(); // method that creates the user interface
private void createUserInterface()
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbcon = DriverManager.getConnection("jdbc:odbc:CMT3991", "", ""); // Access/ODBC
//connection ash used to connect to the user table in access
} catch(Exception eee)
eee.printStackTrace(); //exception if error occurs during the driver connection
System.out.println("* UserDA CONNECTED *");
}).start();
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME - PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
// loginJButton.setVisible(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
// showJButton.setVisible(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "CHOOSE A NUMBER OF OPTIONS AND GET READY:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
coJLabel= new JLabel();
coJLabel.setBounds( 70, 40, 530, 35 );
coJLabel.setText("Choose a colour:");
helpJPanel.add( coJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
colourJComboBox = new JComboBox( col );
colourJComboBox.setBounds( 70, 70, 135, 21 );
colourJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( colourJComboBox );
colourJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
colourChoice="Black";
int x = colourJComboBox.getSelectedIndex();
if( x == 0)
flag = 1;
colourChoice="Red";
else if(x == 1)
flag = 2;
colourChoice="Blue";
else if(x == 2)
flag = 3;
colourChoice="Green";
else if(x == 3)
flag = 4;
colourChoice="Yellow";
else if(x == 4)
flag = 5;
colourChoice="Orange";
else if(x == 5)
flag = 6;
colourChoice="Black";
shJLabel= new JLabel();
shJLabel.setBounds( 340, 40, 530, 35 );
shJLabel.setText("Choose a shape and size:");
helpJPanel.add( shJLabel);
shapeJComboBox = new JComboBox( shapeA );
shapeJComboBox.setBounds( 340, 70, 135, 21 );
shapeJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( shapeJComboBox );
shapeJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xshape = shapeJComboBox.getSelectedIndex();
//shapeChoice="Normal Rectangle";
if( xshape == 0)
{ flagshape = 1;
shapeChoice="Normal Rectangle";
else if(xshape == 1)
{ flagshape = 2;
shapeChoice="Normal Circle";
else if(xshape == 2)//**********here
{ flagshape = 3;
shapeChoice="Normal Oval";
else if(xshape == 3)
{ flagshape = 4;
shapeChoice="BIG Rectangle";
else if(xshape == 4)
{ flagshape = 5;
shapeChoice="BIG Circle";
else if(xshape == 5)
{ flagshape = 6;
shapeChoice="BIG Oval";
else if(xshape == 6)
flagshape = 7;
shapeChoice="small rectangle";
else if(xshape == 7)
{ flagshape = 8;
shapeChoice="small circle";
else if(xshape == 8)
{ flagshape = 9;
shapeChoice="small oval";
/* speedJComboBox = new JComboBox( speed );
speedJComboBox.setBounds( 10, 150, 135, 21 );
speedJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( speedJComboBox );
speedJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xspeed = speedJComboBox.getSelectedIndex();
if( xspeed == 0)
flagspeed = 1;
else if(xspeed == 1)
flagspeed = 2;
else
flagspeed = 3;
System.out.println(flagspeed);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
// startTestJButton.setVisible(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
} // end method main
* action listener for TimeNow Timer
private class TimerListener implements ActionListener
public void actionPerformed(ActionEvent event)
timeLimit ++;
if (timeLimit==100)
temp++;
timeLimit=0;
timerJTextField.setText(String.valueOf(temp +""+timeDec.format(timeLimit)));
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are.");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
// System.out.println(""+ seed.nextInt(shapes.length));
//shape = shapes[seed.nextInt(shapes.length)];//****************************
if (flagshape==1)
shape = shapes[0];// changed colour here***************************
else if (flagshape==2)
shape = shapes[1];// changed colour here***************************
else if (flagshape==3)
shape = shapes[2];// changed colour here***************************
else if (flagshape==4)
shape = shapes[3];// changed colour here***************************
else if (flagshape==5)
shape = shapes[4];// changed colour here***************************
else if (flagshape==6)
shape = shapes[5];// changed colour here***************************
else if (flagshape==7)
shape = shapes[6];// changed colour here***************************
else if (flagshape==8)
shape = shapes[7];// changed colour here***************************
else if (flagshape==9)
shape = shapes[8];// changed colour here***************************
// shape = shapes[8];
System.out.println(shape.toString());
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
infoJTextArea.setText("");
TimeNow.start();
* called by animation panel after shape is clicked
public void stop()
TimeNow.stop();
movingObject();
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
TimeNow.stop();
//timeLimit;
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
System.out.println("shape used: "+shapeChoice);
String mouse = infoJTextArea.getText();
String tick = timerJTextField.getText();
timeResultsJTextField.setText(tick);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter("Backup_of_"+name+"s_results.txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("THIS IS A BACKUP");
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The Shape and size was: "+shapeChoice);
printstream.println("It's colour was: "+colourChoice);
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(temp<5.00)
ratingJTextField.setText("Thierry Henry");
else if(timeLimit<=10)
ratingJTextField.setText("Average");
else if(timeLimit<=15)
ratingJTextField.setText("You gotta be fat or something");
else if(timeLimit<=20)
ratingJTextField.setText("See a doctor");
else if(timeLimit>20)
ratingJTextField.setText("DO YOU KNOW WHAT YOU DOING!?");
String rate=ratingJTextField.getText();
try
Statement st = dbcon.createStatement();
String cmd = "INSERT INTO users (Name, Age, Time_Taken, Rating, Mouse_Movement,Shape_and_Size, Shape_Colour) VALUES ('" + name + "' , " + age + " , '" + tick + "' , '" + rate+"','"+ mouse+"','"+ shapeChoice+"','"+ colourChoice+"');";
//creates a SQL statement and executes it
st.executeUpdate(cmd);
st.close();//close the statement
} catch (Exception eDA)
eDA.printStackTrace();
private void showData()
// pretend this takes awhile -> 3 seconds (count)
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
}).start();
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
timer = new Timer(-20, this);
host = rt;
/* if (rt.flagspeed==1)
timer = new Timer(-20, this);
else if (rt.flagspeed==2)
timer = new Timer(20, this);
else if (rt.flagspeed==3)
timer = new Timer(100, this);
//change speed here******************************
x = 0;//0
y = 0;//0
dx =2;//2
dy = 3;//3
//setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
if (RT.flag==1)
{g2.setPaint(Color.red);// changed colour here***************************
else if (RT.flag==2)
{g2.setPaint(Color.blue);// changed colour here***************************
else if (RT.flag==3)
{g2.setPaint(Color.green);// changed colour here***************************
else if (RT.flag==4)
{g2.setPaint(Color.yellow);// changed colour here***************************
else if (RT.flag==5)
{g2.setPaint(Color.orange);// changed colour here***************************
else if (RT.flag==6)
{g2.setPaint(Color.black);// changed colour here***************************
xfoI'm (being lazy and) using the older RT app posted on your last thread. I removed the
TimeNow timer from the RT class and used System.currentTimeMillis (as you requested) to
determine the elapsed time during the animation (see "startTest", "stop" and
"movingObject" methods). Also changed the DecimalFormat to NumberFormat and set the
"maximumFractionDigits" to "2" so it will truncate the fraction to two digits (more simple
than before). Made arrangements for the ShapeMovingPanel class to update the
"timerJTextField" during the animation (RT.updateTime method).
The MouseMotionListener is causing the animation to appear jerky and uneven. The
"mouseMoved" method is very busy while the mouse is moving. You might consider recording
the "mousePressed" events instead of the "mouseMoved" events, ie, the events where the user
is attempting to click inside the moving shape. It would allow the app to be more
responsive and might eliminate the uneven motion of the animating shape.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;;
// creates and sets up a number of varibles to be used by the class
private long startTime;
private long endTime;
public int timeLimit = 0;
public int age;
public String name;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
NumberFormat timeDec;
Random seed;
Shape shape;
Shape[] shapes = {
new Rectangle2D.Double(50, 30, 75, 25),
new Ellipse2D.Double(175, 125, 50, 50),
new Ellipse2D.Double(90, 100, 75, 35)
public RT()
timeDec = NumberFormat.getInstance();
timeDec.setMaximumFractionDigits(2);
seed = new Random();
shape = shapes[0];
createUserInterface();
private void createUserInterface()
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME -PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "HELP DETAILS:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
// this is causing the animation to appear uneven
// you can try the app with and without this to see
// testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( EXIT_ON_CLOSE );
} // end method main
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
shape = shapes[seed.nextInt(shapes.length)];
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
startTime = System.currentTimeMillis();
infoJTextArea.setText("");
* called by animation panel after shape is clicked
public void stop()
endTime = System.currentTimeMillis();
movingObject();
* called by timer actionPerformed in ShapeMovingPanel
public void updateTime()
long timeNow = System.currentTimeMillis();
double elapsed = (timeNow - startTime)/1000.0;
timerJTextField.setText(timeDec.format(elapsed));
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
double elapsedTime = (endTime - startTime)/1000.0;
timeLimit = (int)elapsedTime;
timeResultsJTextField.setText(timeDec.format(elapsedTime)+" seconds");
String mouse = infoJTextArea.getText();
String tick = timeDec.format(elapsedTime);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter(name+".txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(timeLimit<5)
ratingJTextField.setText("Thierry Henry");
if(timeLimit>5)
ratingJTextField.setText("Average");
if(timeLimit>10)
ratingJTextField.setText("You gotta be fat or something");
if(timeLimit>20)
ratingJTextField.setText("See a doctor");
String rate=ratingJTextField.getText();
private void showData()
// String results = "";
// infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
host = rt;
timer = new Timer(25, this);
x = 0;
y = 0;
dx = 2;
dy = 3;
setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
// update RT.timerJTextField
host.updateTime();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
g2.setPaint(Color.red);
xformed = at.createTransformedShape(shape);
g2.draw(xformed);
public void start()
if(!timer.isRunning())
timer.start();
public void setShape(Shape s)
shape = s;
Rectangle r = shape.getBounds();
x = r.x;
y = r.y;
repaint();
private class ShapeTender extends MouseAdapter
public void mousePressed(MouseEvent e)
if(xformed.contains(e.getPoint()))
timer.stop();
host.stop();
} -
Need some help with Slow Downs in Java3D and Servlets
Hi,
I realize that there is a separate forum for Java 3D, but I posted there, and did not get any response. This is kinda the crux of my program, so I would like to invite anybody on this forum with knowledge of Java 3D and servlets to give it a stab. Between this post and that one, there are TWENTY duke dollars up for grabs.
Thanks.
http://forum.java.sun.com/thread.jspa?threadID=603198Let me have an educated guess.
You calculated the time elapsed before sending in a server request - and at that point you have you updated timeLastStateChange yet, which means by the time of the next calculation of time elapsed this apparent delay is not counted in, hence the slow down in animation rate.
Hope this helps~
Alex Lam S.L. -
Photoshop CC slows down suddenly, for several minutes
Hi!
I have a problem with Photoshop CC. I sit on a 27" iMac, 8GB RAM and an i5 processor, OS X Mavericks, Wacom intuos Pro tablet.
My problem, that suddenly occurs is tha Photoshop CC suddenly slows down to a halt. No error messages, it just gets very very slow. The first sign is that I suddenly cant zoom. I try to zoom, and nothing happens. Then the cursor, still able to move around with no problem, wont change to an arrow when hovering over buttons or menu items. If I open Safari, everything works fine, exept if I go back to Photoshop, then only the properties window will show. Photoshop is like this for up to ten minutes, then suddenly everything happens at once. All the zooming, closing of images if I tried that (with the keyboard), and then it is all fine again.
The problem occurs both when I do complex work with many layers, but also when doing simpler work with just a few layers.
I have 850GB free storage space and Photoshop is allowed to use 5GB of RAM. I usually dont have open more than two pictures at once. I use Lightroom 5, and PS CC as an external editor.
Any ideas how to solve this? It does sound like PS is writing alot to the HD sometimes, but it should not get this slow anyway, and the program does not freeze as in software error. I dont need to force quit PS, I just need to wait it out. Very annoying!
Sorry for my bad English! It is not my first languageTells us a bit more about the work you are doing:
How many layers?
What types of layers? Shape? Text? etc.
Document dimensions?
Bit depth?
File size on disk?
Also, tell us a little about how things are set up:
Where is your scratch disk?
How much free space on that disk?
How much RAM? -
My mid 2011 MacBook Air has slowed down significantly overnight?
Last night my MacBook Air was working fine.
When I went to use it this morning, it has slowed down significantly. It takes awhile for it to respond to trackpad movement or the keyboard. Opening finder is delayed now, opening any app is delayed now. Booting it back up takes extra long now, probably around a minute compared to thirty seconds before.
I've tried an SMC reset, repairing the disk and repairing disk permissions.
From what I can see, the hardware doesn't appear to be failing, but I could be wrong.
Can anyone help me out? What could possibly be going on with my MacBook? How did this happen overnight?Your MacBook Air's memory is not upgradable, and as you already determined unused storage capacity is not a relevant factor.
There are many reasons a Mac may be performing slower than expected.
Back up your documents and everything else important to you before proceeding.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
To identify potential hardware problems: Apple Hardware Test. -
My mid 2011 MacBook Air fell off my couch onto carpet. Slowed down.
I made a post a few weeks ago about how my mid 2011 MacBook Air slowed down randomly over night. A few days later it randomly started functioning properly again. I was stoked.
Today, I was using my MacBook on the couch, when it slipped off and landed on the carpet bottom up with the lid closed.
The moment I opened it up again, it was back to being slow again.
I ran the Disk Utility, tried repairing it, it said that the hard drive 'appeared to be ok'
But yeah. I'm gonna say it's a pretty safe to assume that the drop has everything to do with the slow response time.
Would anyone happen to know what actually might have went wrong, though?I would think a poor connection of some sort, may be a plug and socket or a soldered joint problem. I think you need to take it in for repair, I cannot think it will be software that is causing the fault, but...... you never know.
-
New Mac has slowed down dramatically
My mac is only a few weeks old and I have noticed that it has slowed down dramatically. It takes quite awhile for programs to load. The fill-in boxes are not keeping up with my typing and it is getting quite annoying. I am new to Imac, so I am not sure how to go about checking the processing speed, etc. Any help would be appreciated.
Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=7114123 -
Internet speeds keep slowing down to a crawl
I'm having a problem that has only developed in the past week which was during a time when I haven't changed any configurations in that period of time since my son was born a week ago yesterday and I obviously had more important things to do than mess with my network configurations. However, about 2 weeks prior to his birth, in the process of configuring a baby monitoring system with icam source, 3 weeks or so ago, I read that I might be able to improve my internet performance, I ran googles namebench a couple of times and added and re-ordered the DNS servers that had been listed prior to any problems developing based on its' reports. My internet speeds improved as a result of changing those DNS settings and stayed good until the past week. But of course, we now need to use the computer as part of our baby monitoring system and it's not working worth a **** and I'm getting frustrated since I can't put my finger on the problem and I don't really have time to spin around in circles right now. I'm sure it's probably something simple and I can't put my finger on it though. Sleep deprivation is new to me.......
I've kept running log of notes so this is a little deshoveled but I figured the more information I provide the better the chance someone might help me get this solved quickly.
In the last week, since my sons birth, my internet speeds would be okay after restarts and resetting everything, 2.5 Mbps or so but after a 10-15 minutes it starts to slow down to .2-.3 Mbps. I went thru all my network settings, restarted everything, repaired permissions, I've changed ethernet cables reset PRAM, firewall is running, stealth mode enabled, allow signed software incoming connections and my various other programs such as netsessionmac4f3c6b, skype, java, itunes, etc.
All sharing services off and pretty basic login items at startup including growl.
I had AT&T come out and check my DSL line and everything checked out on their end up to and out of the DSL modem based in their equipment tests.
The problem seems to start when I connect my imac (a fairly loaded 27" imac I got in Dec.) First off, as soon as the imac is connected to the modem via ethernet, the old ethernet modem flashes and continues to flash, even right after startup. So the tech thought something was running in the background and I can't figure out what. I looked through login items but don't see anything that would be a problem and am afraid to eliminate everything.
So I created a guest account to eliminate any login items (I think) and in I got 5.69 Mbps right off the bat. But after a minute or two, without changing anything my download speed slows down and I get for example .77 Mbps. The same thing happens with my administrator account on the imac. Fast speeds at startup and more importantly if I change the configuration by switching between ethernet and airport, I get fast speeds right after changing the configuration but after a minute or two I am well below 1.0 Mbps. I've got several network configurations with automatic, airport and ethernet set up in different ways including a clean ethernet connection with the original DNS settings.
I haven't set up an airport only account but that really isn't the way I want to hook up the computer that sits right next to the modem and runs my network. Restarting the old modem and direct connecting the computer to the modem results in the same thing happening.
I connected my ethernet from the (old?) modem directly to my ancient powerbook G4 and I got +5.6 Mbps download but it also slowed down to 300 kbps after 5 minutes or so the first time (old modem?)
Now to explain why I have "old?" listed above. I was then able to get a new DSL modem from AT&T, hook it up just fine, get enormously faster internet service in the 5,000 kbps only to have it slow back down to around 300 kpbs after connected for several minutes.
directly connected to imac-bypassing router
3,500 kbps
after 15 minutes-250 kbps
connected to imac thru router/time capsule with airport extreme
2500 kbps
after 15 minutes=166 kbps
directly connected to an older powerbook G4 with new modem
IP address of 192.168.1.64
5.65 Mbps on speedtest
after 15 minutes=5.67 Mbps
after 30 minutes= 5.59 Mbps
1 hour-5.66 Mbps
Very solid, stable readings for what I am used to. This would seem to isolate the problem to the imac.
directly connected to imac with new modem
IP address of 192.168.1.64
5.8 Mbps on speedtest
after 30 minutes= .60 Mbps-ping takes 250 ms
1 hour= .46 Mbps-ping takes 250 ms
Now a problem that only started last night after I hooked up the new modem and started up my old Time capsule/airport configuration, I got a message that said something to effect of "another device on this network is using computer IP address 192.168.1.64. So I tried manually changing last digit of the IP address on the computer to one number higher and it kept saying the start and end range were incorrect so I shut the airport station down since when it was connected, it would not allow the computer to connect thru the router via ethernet. I did a hard reset on the airport and I got it back up and running just fine but the internet speeds on the imacs' ethernet connections are so slow it's practically worthless. I also checked to see what was connected to my airport on any given occasion, 2 iphones, 2 pads, another imac running upstairs and a newer powerbook running icam source that is supposed to be the baby monitor. Except for the laptop everything can use "802.11n" but the powerbook only connects via 802.11g so I have set the airport to that limiting setting.
Any suggestions? Is there a way for me to log what is happening so I can report in more detail?First thing is to check if the wireless is on a sensible channel: HomeHub doesn't always make sensible choices. Install inSSIDer on your laptop and see what other devices there are around and if there is any clash. Also, try moving the HomeHub around a little, even quite small differences can make a big difference to wireless signals.
You could run an ethernet cable from downstairs to upstairs. Easy to do, but can be a bit unsightly. If most of your devices are upstairs, you could use this cable to connect the modem to the HomeHub. If you have devices both up and down, you may want to keep the HomeHub downstairs and add a switch upstairs.
HomePlug may be suitable for you. If you search Amazon for HomePlug you will see a couple of kits for just over £30. Don't go for an 85Mbps one. A 200Mbps such as the TP-link or D-Link should be much better than wireless, but not as good as a cable.
Depending excatly how many devices you want to connect and where, you can pay more and have a builtin wireless at one end: http://www.amazon.co.uk/Devolo-1408-Wireless-N-HomePlug-Adapter/dp/B00472MMCQ/ref=sr_1_15?ie=UTF8&qi... Or it may be best for you to use the basic devices and add an old wireless router in switch mode. -
I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?
The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter. -
MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation
Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
System Slows Down and Freezes a LOT - Memory? Swap? Hard Drive? AV?
I have a 2.4 GHz 24" dual core iMac (identifier: 7,1). It worked fine for a good while and lately I've been having problems that seem to be getting worse (sometimes it seems to get better, then worse again). I have 4 GB of memory and I'm waiting for more RAM to upgrade it to 6 GB, since I hear that's the max anyone's run successfully in this model.
I've often had a number of programs running at once. Usually I have Firefox, Apple Mail, the KDE's Konsole and Kate (from MacPorts), Calendar, Stickies, MacIago, and Pysol running. (Yes, it helps to have a few games up for breaks when I'm working.) I know that's a lot, but for well over a year, I was working with that setup without problems, without getting stuck for long times with the pinwheel of death or anything like that.
I'm not exactly sure when it started, but now I have times where I will do something and the program will freeze and I get the pinwheel of death. I wait and after 30-60 seconds I can do something, but sometimes I still get hesitations and a start-freeze&stop-go mode for a bit. Sometimes this freezes the whole computer for up to 30-60 seconds and I can't even check another space with Command-Arrow.
I've been trying to backtrack to see if I could figure out what is causing this. Sometimes killing Firefox helps, so I switched to Chrome and watched for usage on Activity Monitor and Chrome uses FAR less CPU time. I have FlashBlock and AdBlocker Plus on Chrome (had it on Firefox, and before that, used NoScript for blocking). But I've seen this happen even without a browser open.
I suspect this could be an issue with swap, since recently I was watching and saw spikes in disk usage around these times, but I'm not sure of the correlation yet. Sometimes it seems like whenever I switch to a different program, whenever I use a new feature, I have to wait (as if it's loading library code or something).
Again, this is a recent issue.
I've upgraded from 10.6.5 to 10.6.6, so I don't know if that could effect this.
I've also started using the free version of Sophos Anti-Virus (which is apparently impossible to quit once it's running) and thought it might be doing scans.
What's also puzzled me is seeing that, with 4 GB of memory, Activity Monitor continually shows 1 GB free, but still indicates 2 GB swap files. So is there a reason 25% of my RAM is not being used?
I've also checked and found my drive to be heavily fragmented. I bought iDefrag, but it can't defrag it because there seem to be some bad blocks. Rather than mark them as bad every time it hits that spot, it just tells me it can't access that part of the drive.
My guess is that OS X, for some reason, leaves a set amount of memory free to use for various reasons and that, due to fragmentation, what was once an easy task of accessing something in a swap file is now time-consuming.
Is that on target? What else could be causing this problem? This is beginning to make my iMac unusable. If it's just swap file issues and defrag problems, I'm thinking of cloning my internal 320 GB drive to a 1 TB drive and replacing the original, then running iDefrag for good measure and continuing from there. (It seems like in OS X finding bad blocks is difficult, from what I've seen.)
What can I do and does anyone have any idea what the problem is? I'll be glad to give more details if that helps, but I've tried to include as much as I can already.
Thanks for any ideas or help.Considering how I've solved this, I'm pretty much shocked that nobody had any answers for this.
I upgraded my drive from the standard 320 GB drive (which had about 79 GB free on it). I used Carbon Copy Clone to copy my system drive to a 1 TB drive, then swapped out the 320 GB for the 1 TB. When I booted it up and started working, I noticed it was back to the way things used to be: I could go from one program to another to another with NO problem at all. No pinwheels of death and I even added a few more more running programs and still had no issue.
I have no idea why, but before, even when there was a 2 GB swap file, 1 GB (out of 4 GB) of RAM was always unused. I don't know if the OS looks at what it can access and figures read/write times and uses that to figure out how much memory it can effectively handle or what, but now I'm using almost all of my 4 GB of RAM and the swap file is smaller than it was.
So upgrading to a larger drive made a HUGE difference. I'm willing to bet that defragging the old one would have made a difference as well, but there were problems with some files and iDefrag could not read them, which also makes me suspect that drive was on its last legs and close to failure. (That and bad sectors could also have slowed down swap, along with fragmentation issues.)
The solution was a bigger drive, but I suspect defragging the old drive might have helped (if it weren't for possible bad blocks). I know deleting files from the old drive did not help too much. -
How to test hardware on an old MacBook Pro that is slowing down.
I have the very first-gen MacBook Pro 2.0gHz Core Duo, 2gb ram. I have been using this laptop as my primary since I got it, mostly for development work (Java, Objective-C, Web, etc), but also email, general web surfing, and the occational game (although, not in a while).
Recently, I noticed things were starting to "slow down". Well, not slow down so much as things would get long pauses. For instance, I hit a site in Google Chrome, and the app sits there for like 20-30sec of longer, as if the window is frozen, then *poof*, it draws the page. Sometime, Chrome will even pop up asking if I want to kill the page. It is not the only application that seems to be suffering from this, I just spend a LOT of time on the web, so I tend to notice it much more.
Even more recently, my SpringSource Tool Suite (STS, a custom Eclipse with a bunch of SpringSource plugins) started acting up too. Mostly when I start the Roo Shell and execute a command, STS (read Eclipse) will show the command as "executing", but it seemed to never run. I thought it was maybe a problem with STS or the Roo Shell plugin, but yesterday I ran something as a test, then got a phone call and didn't come back for some time. To my surprise after more than 40min of just sitting there the command ran. Once it ran, it ran in full, normal speed (the command I ran was to rebuild the Eclipse project files using Maven). So, what I thought was frozen was merely paused for a long period of time, just like what I was seeing in Chrome.
So, this has lead me to believe I either have some sort of hardware issue, some sort of heat issue (I have seen this on Wintel laptops where the processor "speed steps" down to almost 33mHz), or some sort of software issue. I really don't want to have to re-install OS X, if I can avoid it. I did boot off the original disks that came with my laptop and ran the Hardware Test, but it came back with no errors. I have iStat Pro installed as well, and the fan speeds are usually around 1800-2000rpm, sometimes jumping to 4000+rpm. CPU tempuratures report around 151º. I also ran the Disk Utility off my 10.6 disks. I do know that my DVD burner no longer burns disks, but it hasn't for more than a year.
Laptop specs:
- MacBook Pro, Model MacBookPro1,1
- OS X 10.6.8
- 2.0gHz Core Duo w/ 2gb DDR2 RAM
- Toshiba MK3252GSX 320gb HDD (replacement for factory 120gb HDD over 1.5yrs ago due to space issues)
- I recently replaced the battery, as the old one had expanded. I use the laptop on wall power 99% of the time.
Thanks,
Mike BauerAs mentioned above, I did do this. What I am not so certain is how intensive this test is. Stated another way: If this was ran and passed 100%, does this mean everything on my laptop is 100% functional, like the fans, processor, cooling, memory, etc? The drive also checked out when I did the Disk Utility from the 10.6 install CDs, and the S.M.A.R.T. check indicates no disk errors.
Maybe I should take it into a Genius and have them look at it. Just not sure how much that will cost me, and its an old laptop, so I don't want to put too much into it. -
I have some problem of performance due to the report generation.
If I do not use "on the fly reporting", performance are ok, each item of my loop takes the same time. But I have nothing in the report.
If I use "on the fly reporting", performance are bad, ecah item of my loop take more and more time which becomes inacceptable. On the contrary, my report is ok.
Is possible to have a report without disturbing and slow down the execution of the sequence ?
Thanks a lot for your support.Hey sfl,
The short answer is NO.
Basically on the fly reporting is being updated everytime a step that records results gets executed. So you have to store that in memory. How many steps do you have? If you have a bunch of steps and your report is really long then you will see performance drop dramatically.
So you have to choose one or the other unfortunately.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~ -
Firefox slows down when opening a site with animated gifs
After updating to FF4, I find that whenever I try to open a page that has multiple animated gifs on it, firefox slows down tremendously. CPU usage goes up to 50-75% and all animated gifs are moving really slow.
It's not only large animated gifs, but it also occurs on forums that have animated smilies. I never had this problem in FF 3.6 nor any other browser (IE, Chrome, Safari). If I start FF4.0 without any add-ons or plugins it does the same thing. Even with a fresh install. Does anyone have a solution to his problem? Since I can't use some of my favorite sites now with FF, without my pc slowing everything down.Disabling the hardware acceleration worked for me!
Maybe you are looking for
-
hi! i'm new with dom4j and i don't have any idea on how to do the following task: i have an xml document which i have to save as an excel file using dom4j. my problem is i also have to insert records in the middle of the file. is it possible? sample
-
OWSM Async Dynamic URL Callback
I have an async web service setup on OWSM. The callback forwards the response to the URL which is configured in the "HTTP Messenger/URL". The problem is that the client that will be using the web service will be changing the URL configured in the "HT
-
Disc Plays in Home Player but not in My Macbook Pro?
I just burned a disk and it played fine in my 7-yr old home player, though when I put it in my 1-yr old Macbook Pro, the mac thought it was a blank disk and asked me if I wanted to open it. After mounting it, I double-clicked on it and it does not sh
-
Hi all, I created business place validation for T.Code F-43, FB60, FB65, FB70. Now i want to create the same validation for T.Code MIRO. please help to me, how to create validation for T.Code MIRO. Thanks in advance. Sunitha.
-
Update for Planned independent requirements MD61
Hello, I'm doing update for Planned independent requirements, from excel file for plan, than incuding material and quantity per period, using transaction MD61. I have the next inputs: - Reqmts plan - Plant - Version - Planning horizon - Planning peri