Slp check failed when installing touchpad driver
hello,
when i try to install the intelligent touchpad driver i get the error message "slp check failed". my OS is win7, installed on the 24gb ssd.
ok it doesnt matter anymore, it seems to work with another driver now, but thanks for reading anyways!
Similar Messages
-
When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006
Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason -
Pnputil - failed to install the driver
Hi,
I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK.
Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
D:\driver>pnputil -i -a SZCCID.INF
Microsoft PnP Utility
Processing inf : SZCCID.INF
Failed to install the driver on any of the devices on the system : No more data are avalaible
Total attempted: 1
Number successfully imported: 0Hi Ding27,
What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
It seems to be a little problem when using the pnputil command.
You may take a try with the following:
pnputil /a /i <file path/inf file name>
Reference:
PnPUtil Command Syntax
PnPUtil Examples
Best regards
Michael Shao
TechNet Community Support -
P4m900m3-l failed to install audio driver
i got this error when installing the driver
when i checked the Device manager
when i tried to uninstall the driver
what should i do?
I'm using winxp (it's my friend's pc actually)From device manager:
Click on "system devices", search and select "Microsoft UAA driver", right click over it and "Disable it".
Reboot PC, and boot in "Safe Mode", go again to device manager and locate "Microsoft UAA driver", right click over it and "Un-install".
Select "Audio Device on High Definition Audio Bus" and un-install it too.
Reboot machine in normal mode and run Realtek driver installation again -
Illustrator CS6 says "installation failed" when installing.
Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!
We can't know. You need to provide system information and possibly the install logs:
Troubleshoot with install logs
Mylenium -
Install of Elements trial fails when installing Shared Technologies
Have tried installing the Elements 10 trial on both an XP Pro and a Win7 Pro PC and have the same problem.
Install of trial fails when installing Shared Technologies and then rolls back the install of the Elements Organiser.
Anyone seen this before? Any ideas?Can you please make your question a seperate thread?
It would be helpful if you could please provide us the install log for it. Install logs can be found at C:\Program Files(x86)\Common Files\Adobe\Installers\ with name Elements STI Installer 1.0 <date>.log.gz
Use a decompression utility such as Winzip to uncompress the .gz file. Once uncompressed, you will have a new file without the .gz extension. The filename could now be something like "Elemens STI Installer 1.0 11-21-2012.log."
Open the .log file using notepad
Copy the whole log and paste it here.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_ -
"dependency cycle detected" warnings when installing nvidia driver
I'm getting two "dependency cycle detected" warnings when installing nvidia driver on a fresh arch system:
xorg-server will be installed before its nvidia-libgl dependency
harfbuzz will be installed before its freetype2 dependency
Is that normal?It's not 'normal' but if everything is working fine, no need to worry. They're just warnings, not errors.
-
Windows update error 800f0246 when installing printer driver
I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.
-
Fail during installing AMD driver
Hi , i have been trying to update my AMD 6770m driver from 8.830.6.1000 to the new update but i failed each time
i tried auto detection and update and it shows me errors
i tried manualy by browsing to the c/amd/support then the driver but it show that my driver is uptodate !!!
one time it showed succes and told me to restart my computer then after i did it bring back the old !!
i tried to uninstall it then restart but it goes back to the old
my computer is HP pavilion dv6 6285exHello kreem,
Welcome to the HP Forums!
I understand the computer cannot install the latest AMD driver. I'll do my best to assist you! First, I require the following information:
1. What are the exact errors that appear when you try to install the AMD driver?
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new software or drivers on this computer, before the issue appeared?
4. Are you trying to install the driver from HP.com or AMD.com?
Thanks, and have a great day!
Mario
I worked on behalf of HP. -
Windows update fails to install graphic driver
Hello everyone,
I have a problem, I recently installed Windows 10 Technical build 9926.
Windows update shows me that there is a update available for my Nvidia geforce GT 520 M card.
If I install the driver the installation fails. I have tried this for a couple of times but the problem stays.
Does anyone have a solution for this problem.
My System specifications are:
Windows 10 Technical preview build 9926 ( upgrade from windows 8.1 via windows update)
RAM: 6 GB
CPU: Intel Core i5 2430M
GPU: Nvidia geforce GT 520MFor what it's worth, as a rule, I NEVER install the video drivers offered via Windows Update. They have always been bad news for me. Case in point: I just upgraded my Dell Optiplex 9030 AiO to the Win 10 Ent Preview Build 9926. This PC has an AMD Radeon
R7 M265 video chipset in it, and the system automatically went to Windows Update to get the driver for it. As soon as the driver activated, the screen went blank and stayed that way. The only way to fix it was to roll back the the driver installation
with System Restore. When the PC rebooted, I unplugged the network cable so it couldn't attempt to install the flaky driver again. I downloaded the latest drivers from AMD directly and installed them. That fixed the problem.
So, my advice to you is to use the latest Windows 8/8.1 drivers for your card from the manufacturer's website. DO NOT USE VIDEO DRIVERS THAT ARE OFFERED VIA WINDOWS UPDATE. Other hardware drivers are usually okay, but the video drivers always seem to
be whacked in some way.
Jeff R. -
"FILESYSTEM CHECK FAILED" - fresh install, clean partition
Hi,
I just installed Arch on my Asus EEE 701SD. Since GRUB is extremely slow (takes about 30-45 seconds from "loading..." to menu) I've set up my /boot on a separate flash drive. However, booting the new installation gives me the "FILESYSTEM CHECK FAILED" + maintenance shell. I've tried running fsck with various options but none of it has helped. Apparently, the partition is clean so I'm not quite sure what's going on. Any suggestions?
Cheers:)The hook "usb" should work too, so I don't think we're on the right track here. But since it doesn't hurt you can add the actual kernel modules to the modules= line:
usbcore ehci-hcd (and/or uhci-hcd) usb-storage and maybe the filesystem used (and it's dependencies like ciphers).
Greets,
demian
// I guess I'm a slow typer. Why don't you show us your /etc/fstab?
From what you've written the system shouldn't be able to boot since there's no fstab entry for /boot. Maybe I misunderstood you.
Last edited by demian (2010-06-07 23:00:48) -
PCI standard PCI-to-PCI bridge error when install Chipset driver to T430 with Windows XP
Hi,
I have one T430 and wanna downgrade to Windows XP. After I finished installing OS and procceded to update drivers, this error message
"Cannot Install this Hardware
There was a problem installing this hardware PCI standard PCI-to-PCI bridge
An error occurred during the installation of the device
The data is invalid"
came out when trying to install Chipset driver, which is the only one I failed.
Any ideas about this problem? Thank you.Hi,
Please restart your system and re-install.
Ps should work now.
Regards,
Ashutosh -
Fail to install audio driver lenovo G550 6kg
Hello,
I accidently deleted my conexant audio driver and now unable to completely intalling it back...
I downloaded the driver from lenovo site,each time it fails to install at the "drivet installation wizard" and i'm unable to finish the setup.
My os is Win 7 32 bit' home prehi Bar,
Welcome to Lenovo Community Forums!
Can you Open Device Manager
right click on my computer and choose Manage
On Manage window select Device Manager.
Look if you have a device that has a yellow mark or a question mark.
right click on each and choose uninstall "Place a check on Delete driver software" if it ask. restart the computer.
Computer should be able to detect the Sound device Hardware and ask you again for the driver then install this
Conexant Audio Driver
In still does not install Get its Hardware ID and post it back here thanks,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
[Wireless] MBP 9,1, error when installing b43 driver
I followed the guide for the 9,2 Macbook Pros, and tried to install the driver for b43. However, I get the following error when I run 'make':
gamma% make
make -C /lib/modules/3.13.7-1-ARCH/build M=/home/glitch/compat-drivers-2013-03-28-5 modules
make[1]: Entering directory '/usr/lib/modules/3.13.7-1-ARCH/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving directory '/usr/lib/modules/3.13.7-1-ARCH/build'
Makefile:103: recipe for target 'modules' failed
make: *** [modules] Error 2
I didn't find anything in the wiki about this, so I'm turning to the forum.That page gives some horrible advice. Not only are you trying to build a module that is already included in the kernel, but this page tells you to do it in a way that will result in untracked files in /usr. Essentailly you are trying to build a module from 9 months ago for the current kernel. Even if this were what you needed to do, you should be using the Arch packaging tools to install it with pacman (its actually super easy).
If you still want to use b43, just install the b43-firmware from the AUR. This will pull the firmware out of the broadcom sta driver with the b43-fwcutter package and use it for the b43 modules. -
Java ME 8 Permission check failed when opening a serial port
I have a larger Jave ME8.1 application that was going well until I tried to add one last piece, reading and writing data from a serial port. This was left to last because it is trivial, at least in most programming languages. The is IDE NetBeans 8.0.2 running on a Windows 7 PC. The platform is a Raspberry Pi B or B+ (I have tried both) with the most current Raspbian (12/24/2014 I believe). To simplify the process I created a new app with just the open and close code and this generates the same error I am experiencing in the larger application. The program is as follows:
package javamecomapp;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.microedition.io.CommConnection;
import javax.microedition.io.Connector;
import javax.microedition.midlet.MIDlet;
* @author ****
public class JavaMEcomApp extends MIDlet {
static int BAUD_RATE = 38400;
static String SERIAL_DEVICE = "ttyAMA0";
static CommConnection commConnection = null;
static OutputStream os = null;
static InputStream is = null;
static String connectorString;
private int rtnValue = -1;
@Override
public void startApp() {
java.lang.System.out.println("Opening comm port.");
try {
rtnValue = JavaMEcomApp.openComm();
} catch (IOException ex) {
Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
@Override
public void destroyApp(boolean unconditional) {
java.lang.System.out.println("Closing comm port.");
try {
rtnValue = JavaMEcomApp.closeComm();
} catch (IOException ex) {
Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
private static int openComm()throws IOException {
java.lang.System.out.println("Opening comm port.");
connectorString = "comm:" + SERIAL_DEVICE + ";baudrate=" + BAUD_RATE;
commConnection = (CommConnection)Connector.open(connectorString);
is = commConnection.openInputStream();
os = commConnection.openOutputStream();
return 0;
private static int closeComm()throws IOException {
java.lang.System.out.println("Closing comm port.");
is.close();
os.close();
commConnection.close();
return 0;
If I comment out the JavaMEcomApp.openComm and closeComm lines it runs fine. When they are included, the following error is dumped to the Raspberry Pi terminal:
Opening comm port.
Opening comm port.
[CRITICAL] [SECURITY] iso=2:Permission check failed: javax.microedition.io.CommProtocolPermission "comm:ttyAMA0;baudrate=38400" ""
TRACE: <at java.security.AccessControlException: >, startApp threw an Exception
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
Closing comm port.
Closing comm port.
TRACE: <at java.lang.NullPointerException>, destroyApp threw an Exception
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
I have tried this with three different serial ports, /dev/ttyAMA0 (yes I did disable the OS from using it), an arduino board /dev/ttyACM0, and a USB to RS485 adaptor /dev/ttyUSB0. All of these ports could be connected and use normally with both a C program and terminal program in the Pi. The API Permissions were set in the project properties / Application Descriptor / API Permissions to jdk.dio.DeviceMgmtPermission "/dev/ttyAMA0". This of course was changed as I tested different devices.
I found a reference suggesting adding the line "authentication.provider = com.oracle.meep.security.NullAuthenticationProvider" to the end of the jwc_properties.ini file. This had no effect. I found references that during development in eclipse and NetBeans, the app is already elevated to the top level so this should not be an issue until deployment. This does not appear to be the case.
I am out of time and need a solution quickly. Any suggestions are welcome.Terrence,
Thank you for responding and confirming the issues I'm having with static addressing. As far as the example above, I do have the standard LEDs working correctly, however, the example I'm referring to above is from the JavaME samples using the GPIO Port for the LEDS, according to the Device I/O Preconfigured List you referenced:
GPIO Ports
The following GPIO ports are preconfigured.
Devicel ID
Device Name
Mapped
Configuration
8
LEDS
PTB22
PTE26
PTB21
direction = 1 (Output only)
initValue = 0
GPIOPins:
controllerNumber = 1
pinNumber = 22
mode = 4 (Push-pull mode)
controllerNumber = 4
pinNumber = 26
mode = 4 (Push-pull mode)
controllerNumber = 1
pinNumber = 21
mode = 4 (Push-pull mode)
So is the assumption that using GPIOPort for accessing the GPIO port for Device ID 8 as listed in the Device I/O Preconfigured list not supported?
Maybe you are looking for
-
We are looking for an app that allows our business to track where our company issued IPhone4S's are at all times. Any ideas?
-
REP-51096 printing image from database with web layout on an AIX server
I'm trying to run a report (web_layout) that load images (blob) from the database but I got the message: javax.servlet.jsp.JspException: purge_calls:1446 reason=1 state=5 I checked the reports server log and the job status is "Terminated with error:
-
I have problems with the Assign Access Control in HFM
I have problems when I want assign Access Control by Shared Services in application HFM. I login with user admin and send me this message Processing Error: Description: Invalid argument. Code: -2147220951 Trace: Number:-2147220951 Description: Source
-
Hi there - Every time I try to open an app, it seems to crash. Has anyone experience this problem? Suggestions are appreciated for getting this fixed. Thx!
-
Values disappearing from dropdownbykey
hii, I have a list of values populated in the dropdown which comes from the rfc.While i choose and value and save it in my application, next time the chosen value doesnt appear in the dropdown.Why is this happening? Please do help out. Thanks and reg