SLR - transaction response time for all appl. servers together
Hi,
we want to have in SLR response time for defined transaction. We have activated necessary steps for monitoring transactions, started CPH and we can see in SLR average response times.
We have several application servers and we want to have in SLR TOTAL response time for all appl. servers together.
Is it possible? What is necessary steps to do it?
Thanks for all hints.
Regards,
Roman
Hi Andreas,
Another way to approach this would be to use CCMS transaction monitoring by maintaining table ALTRAMONI (in the satellite system) as described here: http://help.sap.com/saphelp_nw70/helpdata/en/b3/468e3b093d4031e10000000a11402f/content.htm
In RZ20 you'll be able to see the last 24 hours of performance data in a 1-hour granularity, as well as the last 30 minutes in a higher granularity. Depending on your requirements you can then configure alerting so that you get an email when performance passes a certain threshold.
Jon
Similar Messages
-
Transaction response time increase all of suddden
We are in peculiar situation in the oltp env of 11g.
oltp normal transaction will be completed in less than 1 second, sometime its goes up 6 seconds. we looked in awr report and in os load, there are no spikes and they are normal as previous. Application team is blame us, its problem with database. App server i.eApache configured with connection pool so i can't able do the sql trace. How to diagnose this situation? Through ash/awr report can we find any symptons. please advise..user530956 wrote:
We are in peculiar situation in the oltp env of 11g.
oltp normal transaction will be completed in less than 1 second, sometime its goes up 6 seconds. we looked in awr report and in os load, there are no spikes and they are normal as previous. Application team is blame us, its problem with database. App server i.eApache configured with connection pool so i can't able do the sql trace. How to diagnose this situation? Through ash/awr report can we find any symptons. please advise..does SQL utilize BIND variables? -
CVU failing with error msg(PRVF-5636 : The DNS response time for an unreach
I am installing 4Node 10g RAC on OEL5.3, i downloaded CU from OTN and getting below warning messages.
Checking the file "/etc/resolv.conf"; to make sure only one of domain and search entries is defined
File "/etc/resolv.conf"; does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf"; is consistent across the nodes...
domain entry in file "/etc/resolv.conf"; is consistent across nodes
Checking if search entry in file "/etc/resolv.conf"; is consistent across the nodes...
search entry in file "/etc/resolv.conf"; is consistent across nodes
Checking file "/etc/resolv.conf"; to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf";
Checking all nodes to make sure that search entry is "soft1" as found on node "racnode4"
All nodes of the cluster have same value for 'search'
Checking DNS response time for an unreachable node
Node Name Status
racnode4 failed
racnode3 failed
racnode2 failed
racnode1 failed
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: racnode4,racnode3,racnode2,racnode1
File "/etc/resolv.conf"; is not consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Pre-check for cluster services setup was unsuccessful on all the nodes.
[oracle@racnode1 bin]$PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: racnode4,racnode3,racnode2,racnode1 have you checked this note? Runcluvfy - Dns Response Time Check - Fails with PRVF-5636 The DNS response time for an unreachable node exceeded "15000" ms [ID 1326997.1]
Also have you set Domain name on all servers?
[root@oracle-ha ~]# domainname
(none)
[root@oracle-ha ~]# domainname ckpt.com
[root@oracle-ha ~]# domainname
ckpt.com
[root@oracle-ha ~]#You can check DNS configuration of your setup using this link http://computernetworkingnotes.com/network-administrations/dns-server.html -
Strange response time for an RFC call viewed from STAD on R/3 4.7
Hello,
On our R/3 4.7 production system, we have a lot of external RFC calls to execute an abap module function. There are 70 000 of these calls per day.
The mean response time for this RFC call is 35 ms.
Some times a few of them (maybe 10 to 20 per day) are way much longer.
I am currently analysing with STAD one of these long calls which lasted 10 seconds !
Here is the info from STAD
Response time : 10 683 ms
Total time in workprocess : 10 683 ms
CPU time : 0 ms
RFC+CPIC time : 0 ms
Wait for work process 0 ms
Processing time 10.679 ms
Load time 1 ms
Generating time 0 ms
Roll (in) time 0 ms
Database request time 3 ms
Enqueue time 0 ms
Number Roll ins 0
Roll outs 0
Enqueues 0
Load time Program 1 ms
Screen 0 ms
CUA interf. 0 ms
Roll time Out 0 ms
In 0 ms
Wait 0 ms
Frontend No.roundtrips 0
GUI time 0 ms
Net time 0 ms
There is nearly no abap processing in the function module.
I really don't uderstand what is this 10 679 ms processing time especially with 0 ms cpu time and 0 ms wait time.
A usual fast RFC call gives this data
23 ms response time
16 ms cpu time
14 ms processing time
1 ms load time
8 ms Database request time
Does anybody have an idea of what is the system doing during the 10 seconds processing time ?
Regards,
OlivierHi Graham,
Thank you for your input and thoughts.
I will have to investigate on RZ23N and RZ21 because I'm not used to use them.
I'm used to investigate performance problems with ST03 and STAD.
My system is R/3 4.7 WAS 6.20. ABAP and BASIS 43
Kernel 6.40 patch level 109
We know these are old patch levels but we are not allowed to stop this system for upgrade "if it's not broken" as it is used 7/7 24/24.
I'm nearlly sure that the problem is not an RFC issue because I've found other slow dialog steps for web service calls and even for a SAPSYS technical dialog step of type <no buffer>. (what is this ?)
This SAPSYS dialog step has the following data :
User : SAPSYS
Task type : B
Program : <no buffer>
CPU time 0 ms
RFC+CPIC time 0 ms
Total time in workprocs 5.490 ms
Response time 5.490 ms
Wait for work process 0 ms
Processing time 5.489 ms
Load time 0 ms
Generating time 0 ms
Roll (in+wait) time 0 ms
Database request time 1 ms ( 3 Database requests)
Enqueue time 0 ms
All hundreds of other SAPSYS <no buffer> steps have a less than 5 ms response time.
It looks like the system was frozen during 5 seconds...
Here are some extracts from STAD of another case from last saturday.
11:00:03 bt1fsaplpr02_PLG RFC R 3 USER_LECKIT 13 13 0 0
11:00:03 bt1sqkvf_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:04 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 19 19 0 16
11:00:04 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 77 77 0 16
11:00:04 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:04 bt1sqkvf_PLG_18 RFC R 4 USER_LECDIS 14 14 0 16
11:00:05 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 12 12 0 16
11:00:05 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 53 53 0 0
11:00:06 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 76 76 0 0
11:00:06 bt1sqk2t_PLG_18 RFC R 0 USER_LECDIS 20 20 0 31
11:00:06 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 12 12 0 0
11:00:06 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 13 13 0 0
11:00:06 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 34 34 0 16
11:00:07 bt1sqkvh_PLG_18 RFC R 0 USER_LECDIS 15 15 0 0
11:00:07 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 13 13 0 16
11:00:07 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 19 19 0 0
11:00:07 bt1fsaplpr02_PLG RFC R 3 USER_LECKIT 23 13 10 0
11:00:07 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 38 38 0 0
11:00:08 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 20 20 0 16
11:00:09 bt1sqkvg_PLG_18 RFC R 0 USER_LECDIS 9 495 9 495 0 16
11:00:09 bt1sqk2t_PLG_18 RFC R 0 USER_LECDIS 9 404 9 404 0 0
11:00:09 bt1sqkvh_PLG_18 RFC R 1 USER_LECKIT 9 181 9 181 0 0
11:00:10 bt1fsaplpr02_PLG RFC R 3 USER_LECDIS 23 23 0 0
11:00:10 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 8 465 8 465 0 16
11:00:18 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 18 18 0 16
11:00:18 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 89 89 0 0
11:00:18 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 75 75 0 0
11:00:18 bt1sqkvh_PLG_18 RFC R 1 USER_LECDIS 43 43 0 0
11:00:18 bt1sqk2t_PLG_18 RFC R 1 USER_LECDIS 32 32 0 16
11:00:18 bt1sqkvg_PLG_18 RFC R 1 USER_LECDIS 15 15 0 16
11:00:18 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:18 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 14 14 0 0
11:00:18 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 69 69 0 16
11:00:18 bt1sqkvf_PLG_18 RFC R 5 USER_LECDIS 49 49 0 16
11:00:18 bt1sqkve_PLG_18 RFC R 5 USER_LECKIT 19 19 0 16
11:00:18 bt1sqkvf_PLG_18 RFC R 5 USER_LECDIS 15 15 0 16
The load at that time was very light with only a few jobs starting :
11:00:08 bt1fsaplpr02_PLG RSCONN01 B 31 USER_BATCH 39
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 31 USER_BATCH 34
11:00:08 bt1fsaplpr02_PLG /SDF/RSORAVSH B 33 USER_BATCH 64
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 33 USER_BATCH 43
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 34 USER_BATCH 34
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 35 USER_BATCH 37
11:00:09 bt1fsaplpr02_PLG RVV50R10C B 34 USER_BATCH 60
11:00:09 bt1fsaplpr02_PLG ZLM_HDS_IS_PURGE_RESERVATION B 35 USER_BATCH 206
I'm thinking also now about the message server as there is load balancing for each RFC call ?
Regards,
Olivier -
How to capture transaction response time in SQL
I need to capture Transaction response time (i.e. ping test) to calculated the peak hours and averaged
on a daily basis.
and
Page refresh time that is calculated no less than every 2 hours for peak hours and averaged on a daily basis.
Please assist
kMy best guess as to what you are looking for is something like the following (C#):
private int? Ping()
System.Data.SqlClient.SqlConnection objConnection;
System.Data.SqlClient.SqlCommand objCommand;
System.Data.SqlClient.SqlParameter objParameter;
System.Diagnostics.Stopwatch objStopWatch = new System.Diagnostics.Stopwatch();
DateTime objStartTime, objEndTime, objServerTime;
int intToServer, intFromServer;
int? intResult = null;
objConnection = new System.Data.SqlClient.SqlConnection("Data Source=myserver;Initial Catalog=master;Integrated Security=True;Connect Timeout=3;Network Library=dbmssocn;");
using (objConnection)
objConnection.Open();
using (objCommand = new System.Data.SqlClient.SqlCommand())
objCommand.Connection = objConnection;
objCommand.CommandType = CommandType.Text;
objCommand.CommandText = @"select @ServerTime = sysdatetime()";
objParameter = new System.Data.SqlClient.SqlParameter("@ServerTime", SqlDbType.DateTime2, 7);
objParameter.Direction = ParameterDirection.Output;
objCommand.Parameters.Add(objParameter);
objStopWatch.Start();
objStartTime = DateTime.Now;
objCommand.ExecuteNonQuery();
objEndTime = DateTime.Now;
objStopWatch.Stop();
objServerTime = DateTime.Parse(objCommand.Parameters["@ServerTime"].Value.ToString());
intToServer = objServerTime.Subtract(objStartTime).Milliseconds;
intFromServer = objEndTime.Subtract(objServerTime).Milliseconds;
intResult = (int?)objStopWatch.ElapsedMilliseconds;
System.Diagnostics.Debug.Print(string.Format("Milliseconds from client to server {0}, milliseconds from server back to client {1}, and milliseconds round trip {2}.", intToServer, intFromServer, intResult));
return intResult;
Now, while the round trip measurement is fairly accurate give or take 100ms, any measurement of latency to and from SQL Server is going to be subject to the accuracy of the time synchronization of the client and server. If the server's and client's
time isn't synchronized precisely then you will get odd results in the variables intToServer and intFromServer.
Since the round trip result of the test is measured entirely on the client that value isn't subject to the whims of client/server time synchronization. -
All,
I am in a predicament with internet browsing speeds...We have a 3rd party look after our line and internet facing f/w so I cant troubleshoot them, so at the moment Im looking at ISA as the potential bottleneck - we have a fairly standard environment:
Internal > Local Host > Perimiter n/work > Firewall > Internet
I have been running custom reports on the ISA server to see what data can be collected - I have noticed that "Average response time for non cached requests" (traffic by time of day) can be as high as 76 seconds!!!!!! Cached hits are between .5
and 2 seconds.
I have also coonfigured a connectivity verifier which is also flagging slow connectivity, massively over the >5000ms and also reporting "cant resolve server name on occassions- and this is configured for
www.Microsoft.com --- DNS ???!?!, however I have looked through DNS (no obvious errors / config issues) which I can see
I have run the BPA on ISA server to ensure its Health - - connectivity verifier errors flagged timeouts to microsoft.com as expected...
Can anyone advise any obvious areas to investigate as Im struggling! - as always the 3rd party have told us the internet pipe is fine :OProblem resolved.
DNS forwarders have been changed on the ISA server / DNS and this has improved lookup speed considerably.
thanks all :) -
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000"
Friends,
OS: OEL 6.3 64 bit
DB: 11.2.0.3
Environment: VirtualBox 4.1.20
i have 3 nodes. one is for dns and other two for rac1 and rac2
i have done all the preliminary steps. then i started
[oracle@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verboseand all are passed except the above subjected error.
Checking DNS response time for an unreachable node
Node Name Status
rac2 failed
rac1 failed
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: rac2
File "/etc/resolv.conf" is not consistent across nodesok....now to solve this error...i tried many options...but not able to succeed.
Try 1:
[root@mydns ~]# time nslookup rac1
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac1.sathy.net
Address: 192.168.1.3
real 0m0.051s
user 0m0.003s
sys 0m0.011s
[root@mydns ~]# [oracle@rac1 grid]$ time nslookup mydns
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: mydns.sathy.net
Address: 192.168.1.2
real 0m0.019s
user 0m0.005s
sys 0m0.008s
[oracle@rac1 grid]$
[root@rac2 ~]# time nslookup rac1
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac1.sathy.net
Address: 192.168.1.3
real 0m0.019s
user 0m0.008s
sys 0m0.005s
[root@rac2 ~]# Try 2:
[root@mydns ~]# nslookup sathy-scan
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: sathy-scan.sathy.net
Address: 192.168.1.8
Name: sathy-scan.sathy.net
Address: 192.168.1.9
Name: sathy-scan.sathy.net
Address: 192.168.1.7
[root@mydns ~]# nslookup rac1
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac1.sathy.net
Address: 192.168.1.3
[root@mydns ~]# nslookup rac2
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac2.sathy.net
Address: 192.168.1.5
[root@mydns ~]#
[oracle@rac1 grid]$ nslookup sathy-scan
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: sathy-scan.sathy.net
Address: 192.168.1.9
Name: sathy-scan.sathy.net
Address: 192.168.1.7
Name: sathy-scan.sathy.net
Address: 192.168.1.8
[oracle@rac1 grid]$ nslookup rac2
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac2.sathy.net
Address: 192.168.1.5
[oracle@rac1 grid]$ nslookup rac1
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac1.sathy.net
Address: 192.168.1.3
[oracle@rac1 grid]$
[root@rac2 ~]# nslookup sathy-scan
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: sathy-scan.sathy.net
Address: 192.168.1.7
Name: sathy-scan.sathy.net
Address: 192.168.1.8
Name: sathy-scan.sathy.net
Address: 192.168.1.9
[root@rac2 ~]# nslookup rac1
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac1.sathy.net
Address: 192.168.1.3
[root@rac2 ~]# nslookup rac2
Server: 192.168.1.2
Address: 192.168.1.2#53
Name: rac2.sathy.net
Address: 192.168.1.5
[root@rac2 ~]# Try 3:
[root@mydns ~]# cat /etc/named.conf
// Default named.conf generated by install of bind-9.2.4-30.el4_7.2
options {
listen-on port 53 { any; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
forwarders { 192.168.1.1; };
include "/etc/rndc.key";
zone "sathy.net" IN {
type master;
file "sathy.net.zone";
allow-update { none; };
zone "1.168.192.in-addr.arpa." IN {
type master;
file "1.168.192.in-addr.arpa";
allow-update { none; };
zone "." in {
type hint;
file "/dev/null";
[root@mydns ~]# Try 4:
[root@mydns ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
#SELINUXTYPE=targeted
[root@mydns ~]#
[oracle@rac1 grid]$ cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
#SELINUXTYPE=targeted
[oracle@rac1 grid]$
[root@rac2 ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
#SELINUXTYPE=targeted
[root@rac2 ~]# what else i have to check to solve this error?
for the past 2 days..i am trying to solve this error. may be somewhere a small mistake is happened from my side, but i am not able to find out.
hope somebody will find out and help me.
thanksok...here it is....
[root@mydns ~]# cat /etc/resolv.conf
# Generated by NetworkManager
search sathy.net
nameserver 192.168.1.2
[root@mydns ~]#
[root@rac1 ~]# cat /etc/resolv.conf
# Generated by NetworkManager
search sathy.net
nameserver 192.168.1.2
[root@rac1 ~]#
[root@rac2 ~]# cat /etc/resolv.conf
# Generated by NetworkManager
search sathy.net
nameserver 192.168.1.2
[root@rac2 ~]#
[root@mydns ~]# cat /etc/hosts
#127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
#::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public Network – (eth0)
192.168.1.3 rac1.sathy.net rac1
192.168.1.5 rac2.sathy.net rac2
# Public Virtual IP (VIP) addresses – (eth0:1)
192.168.1.4 rac1-vip.sathy.net rac1-vip
192.168.1.6 rac2-vip.sathy.net rac2-vip
# Private Interconnect – (eth1)
192.168.2.3 rac1-priv.sathy.net rac1-priv
192.168.2.5 rac2-priv.sathy.net rac2-priv
#Compute Node Client Access SCAN Interface details
#192.168.1.7 sathy-scan.sathy.net sathy-scan
#192.168.1.8 sathy-scan.sathy.net sathy-scan
#192.168.1.9 sathy-scan.sathy.net sathy-scan
[root@mydns ~]#
[root@rac1 ~]# cat /etc/hosts
#127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
#::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public Network – (eth0)
192.168.1.3 rac1.sathy.net rac1
192.168.1.5 rac2.sathy.net rac2
# Public Virtual IP (VIP) addresses – (eth0:1)
192.168.1.4 rac1-vip.sathy.net rac1-vip
192.168.1.6 rac2-vip.sathy.net rac2-vip
# Private Interconnect – (eth1)
192.168.2.3 rac1-priv.sathy.net rac1-priv
192.168.2.5 rac2-priv.sathy.net rac2-priv
#Compute Node Client Access SCAN Interface details
#192.168.1.7 sathy-scan.sathy.net sathy-scan
#192.168.1.8 sathy-scan.sathy.net sathy-scan
#192.168.1.9 sathy-scan.sathy.net sathy-scan
[root@rac1 ~]#
[root@rac2 ~]# cat /etc/hosts
#127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
#::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public Network – (eth0)
192.168.1.3 rac1.sathy.net rac1
192.168.1.5 rac2.sathy.net rac2
# Public Virtual IP (VIP) addresses – (eth0:1)
192.168.1.4 rac1-vip.sathy.net rac1-vip
192.168.1.6 rac2-vip.sathy.net rac2-vip
# Private Interconnect – (eth1)
192.168.2.3 rac1-priv.sathy.net rac1-priv
192.168.2.5 rac2-priv.sathy.net rac2-priv
#Compute Node Client Access SCAN Interface details
#192.168.1.7 sathy-scan.sathy.net sathy-scan
#192.168.1.8 sathy-scan.sathy.net sathy-scan
#192.168.1.9 sathy-scan.sathy.net sathy-scan
[root@rac2 ~]#
[oracle@rac1 ~]$ ssh rac2 date
Sun Sep 9 22:04:45 IST 2012
[oracle@rac1 ~]$ su - grid
Password:
[grid@rac1 ~]$ ssh rac2 date
Sun Sep 9 22:04:54 IST 2012
[grid@rac1 ~]$
[oracle@rac2 ~]$ ssh rac1 date
Sun Sep 9 22:04:18 IST 2012
[oracle@rac2 ~]$ su - grid
Password:
[grid@rac2 ~]$ ssh rac1 date
Sun Sep 9 22:04:31 IST 2012
[grid@rac2 ~]$ Now the error is ...
PRVF-5637 : DNS response time could not be checked on following nodes: rac2,rac1what else?
i wonder how it was successful in my previous installation which in oel 5.7....
Edited by: OraDB on Sep 9, 2012 9:44 AM -
Kindly help me out with this issue
Well, since all your devices are literally using the same iMessage account, of course they share posts.
The cleanest solution is for those other devices to get their own AppleID to use with iMessages so every device has its own unique iMessage account (same thing goes for iCloud).
You can have multiple AppleIDs, and you do not need to use the same one for all Apple accounts or services. e.g. you can use the common AppleID for the iTunes and App store to share purchased content, but use unique AppleIDs for iMessage and/or iCloud to keep those account separate. -
Response time for Error Messages - Please Help
Hi
I have a PRO C application talking to an Oracle database.
The Response time for successful query is within desirable limits.
But when there is a error condition (eg SQLError -3113,or connection refused) it takes more than 9 minutes for the database to respond with the error code.
This condition is observed with only one database while the others are working fine.
What is the reason for this? Can’t it be reduced?
Regards
Davidever been faced with the same problem ?
Why deleting ? It that only one way to fix this problem ?
What are the others doing in such cases. Or am I the only one person
where has this special problem on the world. Becides I dont believe
in solving the problem through removing mentioned directory and
reinstalling. Nevertheless I will try it. I let you know about the result.
bye
sas -
Adjust Date and time for all Photos in an event?
Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?
How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode. -
Significant difference in response times for same query running on Windows client vs database server
I have a query which is taking a long time to return the results using the Oracle client.
When I run this query on our database server (Unix/Solaris) it completes in 80 seconds.
When I run the same query on a Windows client it completes in 47 minutes.
Ideally I would like to get a response time equivalent on the Windows client to what I get when running this on the database server.
In both cases the query plans are the same.
The query and plan is shown below :
{code}
SQL> explain plan
2 set statement_id = 'SLOW'
3 for
4 SELECT DISTINCT /*+ FIRST_ROWS(503) */ objecttype.id_object
5 FROM documents objecttype WHERE objecttype.id_type_definition = 'duotA9'
6 ;
Explained.
SQL> select * from table(dbms_xplan.display('PLAN_TABLE','SLOW','TYPICAL'));
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 2852K| 46M| | 69851 (1)|
| 1 | HASH UNIQUE | | 2852K| 46M| 153M| 69851 (1)|
|* 2 | TABLE ACCESS FULL| DOCUMENTS | 2852K| 46M| | 54063 (1)|
{code}
Are there are configuration changes that can be done on the Oracle client or database to improve the response times for the query when it is running from the client?
The version on the database server is 10.2.0.1.0
The version of the oracle client is also 10.2.0.1.0
I am happy to provide any further information if required.
Thank you in advance.I have a query which is taking a long time to return the results using the Oracle client.
When I run this query on our database server (Unix/Solaris) it completes in 80 seconds.
When I run the same query on a Windows client it completes in 47 minutes.
There are NO queries that 'run' on a client. Queries ALWAYS run within the database server.
A client can choose when to FETCH query results. In sql developer (or toad) I can choose to get 10 rows at a time. Until I choose to get the next set of 10 rows NO rows will be returned from the server to the client; That query might NEVER complete.
You may get the same results depending on the client you are using. Post your question in a forum for whatever client you are using. -
HI
I received this error message when i was trying to install 10g software on oracle linux 5.632 bit machine . how to resolve this issues
Checking consistency of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking DNS response time for an unreachable node
Node Name Status
rac2 failed
rac1 failed
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: rac2,rac1
File "/etc/resolv.conf" is not consistent across nodes
Thanks[oracle@bdk-dev-db2 ~]$ time nslookup bdk-dev-db2
Server: 10.244.56.102
Address: 10.244.56.102#53
Name: bdk-dev-db2.dev.com
Address: 10.244.56.104
real 0m1.811s
user 0m0.003s
sys 0m0.004s
[oracle@bdk-dev-db2 ~]$ time nslookup bdk-dev-db1
Server: 10.244.56.102
Address: 10.244.56.102#53
Name: bdk-dev-db1.dev.com
Address: 10.244.56.103
real 0m0.007s
user 0m0.003s
sys 0m0.002s -
RFx Response Required for All Items
Hi Team
Kindly we use SRM 7 EHP1 with business scenario ( Extend Classic Scenario )
IN Restricted RFx Item level there are checkbox ( RFx Response Required for All Items )
We use it but does not work I do not know why ? any help from you ?Can you be more specific on behavior of system and why you feel the functionality is not working.
-
Change Reminder Time for All Day Events
I have a simple question but I have not been able to find the answer anywhere including by searching this forum. On my iphone, the reminder for my all-day events pop up at 6:00 AM. I usually try to sleep until a little later and get annoyed every day whe these reminders wake me up. Can anyone tell me how to change the reminder time for all day events?
One thing that might help.
Find the event on the iphone.
Tap on the event, then tap edit.
Here you can edit the Alert for that event.
If it is a repeating event, it can be set to this event only or to all future events.
However, an alert always comes up before the event is supposed to start.
Hope this helps. -
On our R/3 ECC6 production system ,we have one aRFC call by external system,there are 200000 times per day.
and the response time for the RFC call is 35ms ,Some times its response time(commit time) are much longer and up to 2 seconds.
There is very simple code for the RFC as shown below
insert ztable from table lt_internal_table.
commit work
call function 'function_name'
starting new task 'N'.
tables
it_tab = lt_internal_table.
Regards,
ShiChunQingDear Randorlf ,
Now i can determine that statement "commit work" have a high cost some times.
I write a simple report as show below,
One high cost will occurs per several minutes.
report ztest.
do 10 times.
GET RUN TIME FIELD t1.
INSERT ytest_table FROM TABLE lt_tab.
GET RUN TIME FIELD t2.
t1 = t2 - t1.
WRITE:/ 'insert:',t1,sy-uzeit.
COMMIT WORK.
GET RUN TIME FIELD t3.
t2 = t3 - t2.
WRITE: 'commit:',t2,sy-uzeit.
enddo.
Run results:
insert: 879 16:23:02 commit: 1,713 16:23:02
insert: 1,607 16:23:05 commit: 4,434 16:23:05
insert: 1,265 16:23:08 commit: 3,790 16:23:08
insert: 648 16:23:11 commit: 1,195 16:23:11
insert: 659 16:23:14 commit: 390,208 16:23:15
insert: 640 16:23:18 commit: 1,032 16:23:18
Best regards
shichunqing
Maybe you are looking for
-
Hello I created simple FM in SAP BI. But system generates the following error when I run it : Runtime Errors CALL_FUNCTION_NOT_ACTIVE Except. CX_SY_DYN_CALL_ILLEGAL_FUNC Date and Time 28.10.2009 11:47:09 The name of th
-
How to apply template page to all pages except for logon page?
Hi, I created a template page with id 0 that contains some copyright and other basic information of my application. Is there a way to apply this to all pages within my application except for the logon page? Regards, Tamas
-
Pencast Pdf file audio doesn't work
I have to download lectures from my professor for class and she has a Pencast pdf file with audio but it does not work on my computer. I have tried opening it up on Safari and Chrome but neither have worked. I have downloaded the most recent version
-
SQL2008R2 new named instance in existiong cluster as a new resource.
Hello everyone. I'm trying to find out the best way to install a new named instance of a SQL2008R2 server in clustered environment. The current windows cluster is a 2 node cluster and contains the DTC and 2 Named SQL Server instance: MSSQLSERVER(Defa
-
HT201263 Ipod white screen HELP!
hey i have an ipod touch 4th gen and this morning it went to white screen and i cannot connect to my itunes because it isnt recognizing my ipod for some reason (i am guessing because of the white screen). When i try to reset my Ipod with holding lock