SLT pointing to HANA via db tunnel throws an error during creation of configuration

Hi,
I am trying to replicate data from MS SQL database to Hana via SLT. I have configured the MS SQL database in DBCO and the connection test is successful. I have opened up a db tunnel using the HCP SDK from the SAP SLT server. Using the LTR transaction, I am trying to create a new configuration. In the HANA target details, I enter the user name as DEV_*, password as specified in the command console by sdk, host as localhost:30015. When I specify the configuration name different from NEO_* I see an error "Error opening db connection" and when I enter NEO_* as the configuration name I see an error "invalid table name: Could not find table / view RS_REPLICATION_COMPONENTS in schema SYS_REPL". I cannot see a SYS_REPL schema and I am assuming that this should be created. Any suggestions on how I can get past this error?
Thanks!
SK

Hi SK,
Where are you checking SYS_REPL schema?
Best Regards
Sachin

Similar Messages

Getting error during creation of recovery point and synchronization

hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated.

hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated.

Error during creation of entry sheet via BAPI

Hi all,
I have a problem with that bapi and that user exit. I can create a entry sheet with the bapi BAPI_ENTRYSHEET_CREATE and get it accepted using the flag BAPIESSRC-ACCEPTANCE of the header.
But if i use the enhancement SRVEDIT in order to do a custom validation i get the following error during the creation of the entry sheet: "E SE 214 Error during update".
Even if i don't do anything in the user exit (only activate it) i still get the message "Error during update". Anybody knows if there is a problem with that user exit? should i do something specific to use that user exit (it doesn't exist any documentation for the user)
Anybody has solved the issue? Anyone knows another user exit to use in the moment of save the changes of the entry sheet?
Many thanks in advance
Aaron

Hi John,
Some of the structures you have to fill for the IDOC belongs to a referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.
When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.
Regards Bernhard

Throw error during PO creation if a material is not extended to storage loc

Hi,
Users require for SAP to throw an error during PO creation if a material is not extended to the storage location that is entered on the PO.
Presently it neither gives warning or error message.
Please advise.
Regards,
Pratap

SAP does not validate that, if you want it, then you have to do such check in a user exit.
SAP can be customized to create the material master storage location segment itself when posting the goods receipt, so it is not necessary to check this in the PO.
Further this design speeds up the process, you can already order before others have finished the material master maintenance.

Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Un

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave

Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

This happens with any file .
Send a file with the screen errors and system data . Also send a couple of files PDF.
Translates only txt format.
Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:46
Браузер по умолчанию:
Версия BIOS: _ASUS_ - 1072009
Версия ОС: 6.2.9200
Всего виртуальной памяти: 4194176 KB
Всего физической памяти: 4077252 KB
Графическая плата: Intel(R) HD Graphics 4000
    Версия: 10.18.10.3412
    Отметить: Не поддерживается
Доступная виртуальная память: 3638168 KB
Доступная физическая память: 1689940 KB
Имя пользователя: Vazgen
Имя системы: VAZGENTAICHI
Монитор:
    Название: Intel(R) HD Graphics 4000
    Разрешение: 1920 x 1080 x 60
    Бит на пиксел: 32
Название ОС: Microsoft Windows Vista
Папка Windows: C:\WINDOWS
Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
Почтовая программа по умолчанию: Microsoft Outlook
    mapi32.dll
    Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
Производитель ОС: Microsoft Corporation
Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~1696 Mhz
Сведения о Windows:
   Планшетный ПК: Да
   Начальная версия: Нет
   Media Center Edition: Нет
   Медленный компьютер: Нет
Сведения о сеансе:
   Тип загрузки: Обычный
   Завершение работы: Нет
   Сеть: Доступно
   Внутри Citrix: Нет
   Внутри VMWare: Нет
   Удаленный сеанс: Нет
   Удаленное управление: Нет
   Использование JAWS: Нет
   Использование Windows-Eyes: Нет
   Использование NVDA: Нет
Сведения об Acrobat:
   Изолирование программной среды: Отключить
   Связанная программа для чтения: Нет
   Multi-Reader с поддержкой Desktop: Отключить
Сведения об отображении:
   Ширина экрана: 1920
   Высота экрана: 1080
   Число мониторов: 2
   Число кнопок мыши: 2
   Мышь с колесом прокрутки: Нет
   С маркером Windows: Нет
   Двухбайтовая кодировка: Нет
   С редактором метода ввода: Да
   В программе для чтения с экрана: Нет
Сведения об учетной записи:
   Права пользователя: Администратор
   Управление учетной записью пользователя: Ограниченное
   Целостность процесса: Не определено
   Тип профиля: Отсутствует
Установленные приложения:
   Версия Office: Office 2013 32-bit
Файл подкачки: 4194303 KB
Часовой пояс: Московское время (зима)
Язык: Русский (Россия)
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:18
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:36
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22

ORA Connect via SSH Tunnel on Windows failed! LINUX works ...

Hello again,
i tried to establish a Oracle Client Connection via SSH Tunnel on WinXP Pro.
1. Opened SSH-Tunnel Connection with plink (putty)
TUNNEL: 10.5.1.111:1521 => localhost:1521
(plink works fine with telnet, MySQL Client and other stuff)
2. Connected with Oracle Client on Tunnel END => Localhost, Port 1521
3. WIth ORA8i i got: Paket Error, With ORA10g i get: TNS: no listener
plink works fine, so i dont think the problem is located there.
i tried, tnsnames.ora, easyconnect and TNS-Less. So i guess, its not related to the connection method.
i tried the same on LINUX ... ssh tunnel and sqlplus connect ... IT WORKS !
Does Oracle need an aditional Port?
Does it have Problems with WIN2UNIX Connections? (ORA DB is on UNIX)
tnx

Hi,
Hum..., I guess this not work!
Looking for this schema below, you need put the 1521 port
If you desire, access the www.ssh.com site and download other ssh program
           Secure Connection
   +---->-------[SSH]-------->-----+
   |                               |
   |                               |
   ^                               |
   |       Insecure Connection     v
CLIENTE--->--------------------> ORACLE
ssh2 -l oracle -L 1521:192.148.1.251:1521 200.10.11.12
                    |          |                |
                    |          |                |
               A LOCAL        |                |
               B       INTERNAL IP ORACLE       |
               C                       EXTERNAL IP (GATEWAY)
                                                     C                             B
      | Firewall| . . . . .|INTERNET| . . . . . . |Firewall| . . . . . . . . . . |ORACLE|
      | Gateway |                                 |Gateway |                 192.148.1.251:1521
           .                                     200.10.11.12
     A     .
   |Oracle Client|
   (TNSNAMES.ORA)
     <SERVICO> =
       (DESCRIPTION =
         (ADDRESS_LIST =
           (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
         (CONNECT_DATA =
           (SID = <ORCL>)
       )Cheers

[Fwd: JMS publishing via http-tunneling]

"Jeffrey S. Hair" wrote:
Does anyone know of way to speed up WL JMS publishing via http-tunneling?
We have a server that is publishing messages to JMS rather frequently (1/200 millisecs). We then
have several applications and applets subscribed for this topic. The applications work great and get
all of the messages quite fast (using t3 protocol).
However, the applet, running on the other side of a firewall, and connected to the server over a 28k
modem, receives the updates rather slowly since the messages need tunneled through http. In fact, so
many updates are being published that the applet continually falls behind. If we stopped the updates
or slowed down the updates, the applet would eventually catch up and reflect the latest message.
The sessions in the applet were created using AUTO_ACKNOWLEDGE. I've since changed them to use
CLIENT_ACKNOWLEDGE and allow for 15 seconds of messages to be processed before acknowledging. This
improved the speed but the applet still falls behind to some degree. When the publishing slows down,
the applet now at least catches up.
As a side note, does anyone know of a way to view the contents of the JMS queue?
Thanx,
jsh
Jeffrey S. Hair
Sr. System Architect, FNX Limited[email.eml]

Which web server are you using?
Both iWS6.0 SP2 or iWS Fast-track 4.1 works with iMQ.
But earler versions of iWS6.0 do not and we have no
control of that.

Apache is throwing NLS_LANG error when connecting via HTTPS using a DAD

Our Apache server is throwing this error
[Wed May 6 11:53:52 2009] [alert] [client 69.246.251.48] [ecid: 223452213192,1] mod_plsql: Unable to issue alter session : alter session set nls_language= "AMERICAN" ""
every time we connect to the server using HTTPS (the connection is using DAD -- see below for the DAD configuration).
If we run the same connection using HTTP it works fine.
Anyone know why this would happen and how we can correct it?
DAD configuration:
<Location /plshes>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername hes
PlsqlDatabasePassword @<password here>=
PlsqlDatabaseConnectString hpprd NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA_WE8ISO8859P1
PlsqlAuthenticationMode PerPackageOwa
PlsqlSessionStateManagement StatelessWithFastResetPackageState
PlsqlErrorStyle ModPlsqlStyle
PlsqlAlwaysDescribeProcedure Off
</Location>

@AMN -- I'm sort of in your camp in that I don't think I should have to remove that line (which I've not been able to test yet, by the way). It's possible removing the line might bypass the issue since the statement will never get issued in the first place, but I will know there is some sort of issue between HTTP and HTTPS that is throwing this error.
To answer your questions:
1. The portal database (IASDB) returns:
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
2. What do you mean by "pls/hes"?
3b. Which type of OAS? Can you clarify this question? OAS 10g (which means IASDB is version 9i). We run Apache using Webcache. This OAS serves up a custom application written largely in Forms and PL/SQL. Hmmm, maybe that's not what you mean by this question , though...
3a. Explain our SSL configuration -- I'll try. I configfured this 4 to 5 years ago and haven't changed it at all other than to update the Oracle Wallet certificates every year or two. We have a single physical server that hosts our infrsastructure and mid-tier components and nothing more. As mentioned, Apache is our webserver and we run Oracle's Webcache. The twist in our configuration (and probably the source of this issue we are having is somewhere in this twist) is that we use one physical server and one Apache web server to serve up both HTTP and HTTPS using a virtual host within Apache and then we deifned multiple sites and origin servers with several redirects on various ports so we can handle SSL and non-SSL connections depending on whether they come to us externally (inTERnet) or internally (inTRAnet).
Webcache sites (hes2 is the server name):
Site Origin Server
hes2:7778 hes2:7779
www.OurWebSite.com:80 hes2:8000
hes2:80 hes2:7779
sso.OurWebSite.com:80 hes2:7777
www.OurWebSite.com:443 hes2:4444
Webcache origin servers:
hes2:7777 HTTP
hes2:7779 HTTP
hes2:8000 HTTP
www.OurWebSite.com:4444 HTTPS
Webcache listen ports:
443 HTTPS -- has Oracle wallet defined for it
7778 HTTP
80 HTTP
Navigating to http://www.OurWebSite.com will redirect to hes2:8000, which is our virtual server (configuration below). Navigating to https://www.OurWebSite.com will redirect to hes2:4444.
There is probably a little more I need to provide to answer the "SSL configuration" question, but I think that is enough for now as this is already a long response -- my apologies for that.
Virtual host configuration in httpd.conf:
<VirtualHost *:8000>
ServerName www.OurWebsiteName.com
ServerAdmin [email protected]
Port 80
DocumentRoot "/u01/app1/oracle/10gasm/Apache/Apache/htdocs"
RewriteEngine on
RewriteOptions inherit
RewriteCond %{HTTP_HOST}!^www\.OurWebSite\.com [NC]
RewriteRule ^/(.*) http://www.OurWebSite.com/$1 [L,R]
OssoIpCheck off
OssoConfigFile /u01/app1/oracle/10gasm/Apache/Apache/conf/osso/osso-www.conf
<Location /portal>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /forms>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /discoverer>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/docs>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/images>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/optiform>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
LogLevel error
ErrorLog "|/u01/app1/oracle/10gasm/Apache/Apache/logs/www_error_log 43200"
</VirtualHost>

Error during a system copy with HANA DB

Hello,
I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
I checked some log files:
-- sapinst.log:
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-08-24 16:14:01.234
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.343
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
INFO 2014-08-24 16:14:01.390
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.422
Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-08-24 16:14:01.640
Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
saplikey: failed to connect to the database.
ERROR 2014-08-24 16:14:01.640
CJS-30023 Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-08-24 16:14:01.703
FCO-00011 The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-08-24 16:14:02.31
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
INFO 2014-08-24 16:14:02.734
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
INFO 2014-08-24 16:14:02.734
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
-- saplikey.log:
saplikey: failed to connect to the database.
-- dev_likey:
-> init()
STATEMENT_CACHE_SIZE = 1000
-> init()
-> loadClientRuntime()
Loading SQLDBC client runtime ...
SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
SQLDBC client runtime is 1.00.80.00.0391861
-> getNewConnection()
<- getNewConnection(con_hdl=0)
-> checkEnvironment(con_hdl=0)
-> connect(con_info_p=0000000000000000)
Try to connect via secure store (DEFAULT) on connection 0 ...
*** ERROR => Connect to database failed, rc=1, rcSQL=10
[dbhdbsql.cpp 332]
SQLCODE    : 10
SQLERRTEXT : invalid username or password:
-> SetSdbDbslCA(errcode=10)
-> freeConnection(con_hdl=0)
   close all opened locators of connection 0
} DbSlHDBConnect(rc=99)
***LOG BY2=> sql error 10     performing CON [dblink       559]
***LOG BY0=> invalid username or password: [dblink       559]
*** ERROR => saplikey: failed to connect to the database. [saplikey.c   830]
release memory of the SIBU buffers
release memory of the STATEMENT CACHE
Can you help me please!? This is very urgent!
Thank you,
samid raif

Hello John Appleby,
I ran the R3trans -d and this is the output:
4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 24.08.2014 - 20:22:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Sun Aug 24 20:22:19 2014                                                 124 0.000124
4 ETW000 [     dev trc,00000] db_con_init called                                                       103 0.000227
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000                                                                                                  94 0.000321
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  44 0.000365
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 26 0.000391
4 ETW000 [     dev trc,00000] Loading DB library 'dbhdbslib.dll' ...                                    64 0.000455
4 ETW000 [     dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
4 ETW000                                                                                                5889 0.006344
4 ETW000 [     dev trc,00000]      using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll"               35 0.006379
4 ETW000 [     dev trc,00000] Library 'dbhdbslib.dll' loaded                                            36 0.006415
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll                    52 0.006467
4 ETW000 [     dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43)                111 0.006578
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll                   39 0.006617
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll                  63 0.006680
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    81 0.006761
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            40 0.006801
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    29 0.006830
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280)            34 0.006864
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    29 0.006893
4 ETW000 [     dev trc,00000] New connection 0 created                                                  25 0.006918
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  63 0.006981
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40)            49 0.007030
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    30 0.007060
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             31 0.007091
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  42 0.007133
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          28 0.007161
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                 124 0.007285
4 ETW000 [     dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000)                             61 0.007346
4 ETW000 [     dev trc,00000] DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43)                    65 0.007411
4 ETW000 [     dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10)                      37 0.007448
4 ETW000 [     dev trc,00000]    (0.043) R3szchk with partitioned tables (note 2040561)                  32 0.007480
4 ETW000 [     dev trc,00000]    (0.031) New DBCON syntax for HANA (note 1983389)                        50 0.007530
4 ETW000 [     dev trc,00000]    (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
4 ETW000                                                                                                  51 0.007581
4 ETW000 [     dev trc,00000]    (0.027) Set DBAREQ class (note 1991383)                                 35 0.007616
4 ETW000 [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               36 0.007652
4 ETW000 [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000                                                                                                  53 0.007705
4 ETW000 [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          35 0.007740
4 ETW000 [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000                                                                                                  52 0.007792
4 ETW000 [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         36 0.007828
4 ETW000 [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 32 0.007860
4 ETW000 [     dev trc,00000]                                                                            22 0.007882
4 ETW000 [     dev trc,00000]   -> init()                                                                33 0.007915
4 ETW000 [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            212 0.008127
4 ETW000 [     dev trc,00000]   -> init()                                                               615 0.008742
4 ETW000 [     dev trc,00000]   -> loadClientRuntime()                                                   46 0.008788
4 ETW000 [     dev trc,00000] Loading SQLDBC client runtime ...                                         31 0.008819
4 ETW000 [     dev trc,00000] SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll              1327 0.010146
4 ETW000 [     dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510               84 0.010230
4 ETW000 [     dev trc,00000] SQLDBC client runtime is 1.00.80.00.0391861                               50 0.010280
4 ETW000 [     dev trc,00000]   -> getNewConnection()                                                    37 0.010317
4 ETW000 [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                          100 0.010417
4 ETW000 [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           53 0.010470
4 ETW000 [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  42 0.010512
4 ETW000 [     dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ...             86 0.010598
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10                11122 0.021720
4 ETW000 [     dev trc,00000] SQLCODE    : 10                                                           68 0.021788
4 ETW000 [     dev trc,00000] SQLERRTEXT : invalid username or password:                                40 0.021828
4 ETW000 [     dev trc,00000]   -> SetSdbDbslCA(errcode=10)                                              41 0.021869
4 ETW000 [     dev trc,00000]   -> freeConnection(con_hdl=0)                                             43 0.021912
4 ETW000 [     dev trc,00000]     close all opened locators of connection 0                              60 0.021972
4 ETW000 [     dev trc,00000] } DbSlHDBConnect(rc=99)                                                   65 0.022037
4 ETW000 [    dblink ,00000] ***LOG BY2=>sql error 10     performing CON                               68 0.022105
4 ETW000 [    dblink ,00000] ***LOG BY0=>invalid username or password:                                 35 0.022140
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48)            107 0.022247
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    79 0.022326
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998)             38 0.022364
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    28 0.022392
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990)             33 0.022425
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    43 0.022468
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0)             35 0.022503
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    27 0.022530
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00)             33 0.022563
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    28 0.022591
2EETW169 no connect possible: "DBMS = HDB                              --- SERVER = '' PORT = ''"
4 ETW000 [     dev trc,00000] release memory of the SIBU buffers                                      2900 0.025491
4 ETW000 [     dev trc,00000] release memory of the STATEMENT CACHE                                     91 0.025582

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created". What's the problem?

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
What's the problem?
Any help in finding a solution is greatly appreciated.
Thank you,

Installed AcrobatXI PRO 11.0.09 on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
But all good saves in the format of TXT and jpg.
I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
Tell me where to find the problem and how to solve it.
Thank you.

Endeca : multi invoice pay throwing correct error for internal user but it is failing to throw the same error for external user

Hi,
1) Internal User expected exception:
Exception: Payments,apply credits,disputes and print are not supported when multiple customer/currency transactions are selected
2) External User is throwing below error instead of throwing above exception.
Error
You are trying to access a page that is no longer active.
The referring page may have come from a previous session. Please select Home
to proceed.
found this MACCHECK from fnd logs of external user payment.
MACCHECK: . Parameter failing validation is :mode. The parameter mode with value MultiPay could not be recognized as part of Server's response on the previous request. Incoming URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/EndecaDummyPG . Current URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/OIREndecaCustHomePG&akRegionApplicationId=222&_ti=1125493452&oapc=10&retainAM=Y&addBreadCrumb=N&oas=6-LL4ndIUFLX-2zjQAQD6A.. . Referer URL is : https://<hostname>:4443/endeca/web/ar/customer?doAsUserLanguageId=en_US&languageId=en_US . HTTP Request Method is : POST
can someone please help.
Thanks,
RRS

Well, I compared my classpath between my windows batch file and the
makefile (that comes with the samples installation) on Solaris and realized
that I am using different sets of jars.
So, I removed the extra jars from the makefile to narrow down the
problem. If I remove the /opt/SUNWam/lib/servlet.jar from the makefile,
I can reproduce this problem on the Solaris box as well.
When I include this servlet.jar on my windows machine the program works!
Only jars I have in my classpath are amclientsdk.jar and servlet.jar which
I have copied from my installation (/opt/SUNWam/lib) on the Solaris box.
Just the same way, by copying the am_services.jar, saaj-api.jar, and jaxm-api.jar,
from the Solarix box to the windows machine,
I am also able to pull the assertions from the Access Manager.
I installed Sun Java Enterprise System 2005Q1 on a Solaris 10 machine.
During the installation, I configured to install the Access Manager
in Sun Application Server.
Why do I need to have different set of jars on the windows machine
for the Access Manager client SDK ?
Could you please point me to a download link where I could download
the correct Windows Access Manager Client SDK for
Sun Java System Access Manager 6.0 (Sun JES 2005Q1)?
Thanks.

IAC application throwing the error ITS_EXPRESSION_NOT_NUM

Hi all,
We are having some IAC applications, the older version is ECC 4.6 . All the applications are working fine there.
Now that we have migrated from ECC 4.6C to ECC 6.0, we have just copied all the IAC applications to the new system.
When tested in the new system. one of the applcitions is throwing a error.(i.e., the ABAP dump is pointing to the Javascript ParseInt method.)
The error is "0.00 could not be converted into numerical value"."ITS_EXPRESSION_NOT_NUM".
My question is:
Is there any possibility that ECC 6.0 is not recognizing the java script of 4.6C(specially the ParseInt functionality).
is there any help documents which give us code samples for syntax to be followed when writing the java script in ABAP.
Any clue to resolve the error would be greatly appreciated.
Thanks & Regards,
Kavitha

Hi Kavitha,
Have you seen the help.sap.com ->
[Migration of Existing ITS Services |http://help.sap.com/saphelp_nw04/helpdata/en/cd/8a424089ff2571e10000000a155106/frameset.htm]
This might be useful to you
Regards,
Oisin

Shared Services URL throws 404 Error

Hi,
I've newly installed and configured EPM on a test server. I seem to be able to start the Hyperion Foundation Services (port 28080 is listening), but when accessing the Shared Services URL, I get a 404 error.
One note: I installed the product at G:\Oracle\Middleware\..., but when starting the Foundation Services, a "product" folder is created under G:\ root folder. It contains the same folder structure as G:\Oracle\Middleware\EPMSystem11R1\products\ but there is no content in the folders. I did not make any conscious update to any config file, so I have no clue why Foundation Services is behaving this way. The diagnostic log seems to point to this as the cause of deployment failure, because it's looking for ear files which don't exist in G:\products.
I've restarted the machine, re-ran the configurator many times, re-installed the EPM product suite, double checked environment variables and registry keys, yet this issue still persists. Can someone give me some help on this? Many thanks!!!
The EPM version is 11.1.2.2 and we are using SQL Server 2008R2.
===========ERROR LOG==================
<May 29, 2013 10:05:49 AM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: File not found with : G:\products\Foundation\AppServer\InstallableApps\common\interop.ear.
weblogic.management.DeploymentException: File not found with : G:\products\Foundation\AppServer\InstallableApps\common\interop.ear
     at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
     at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
     at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
     at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
     at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:91)
     Truncated. see log file for complete stacktrace
Caused By: java.io.IOException: File not found with : G:\products\Foundation\AppServer\InstallableApps\common\interop.ear
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:117)
     at java.util.jar.JarFile.<init>(JarFile.java:135)
     at java.util.jar.JarFile.<init>(JarFile.java:99)
     at weblogic.utils.jars.JarFileDelegate.<init>(JarFileDelegate.java:32)
     Truncated. see log file for complete stacktrace
>
<May 29, 2013 10:05:57 AM EDT> <Emergency> <Deployer> <BEA-149259> <Server 'FoundationServices0' in cluster 'FoundationServices' is being brought up in administration state due to failed deployments.>

I am able to start the Weblogic Administration Console.
In Deployment, I can find the SharedServices listed. When clicking on it, it throws an error about no ear found in path.
In Lock & Edit mode, when Updating the SharedServices deployment, I can see that the Path is indeed pointing to the wrong G:\Products\... folder.
I thought I could update it to point to the right one, but I get an error upon saving: [Deployer:149082]You cannot distribute application <SHAREDSERVICES> without version...
So frustrated :(

Its throwing an error with order related billing

hi,
sap gurus,
in order related billing configuration settings its throwing an error like this
"the items is not relevant for billing".
plz show some way on this its urgent
tommorrow is my delivery time
regards,
balaji.t
09990019711

Normal Sales Order Cycle for Order Related Billing:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
Check Billing relevance for Item Category being used
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
For Order-Related-Billing, use Item Category TAD & Item Category Group in Material Master as LEIS.
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
Note: Ensure that Copy Control settings are done
Sales Order to Billing (OR --> F1): VTFA
Regards,
Rajesh Banka
Reward points if helpful

SLT pointing to HANA via db tunnel throws an error during creation of configuration

Similar Messages

Maybe you are looking for