SLT system cleanup
Hi,
We are replicating data from CRM to SAP HANA using SLT.
We done a lot of development on SLT (created a lot of configurations, deleted them, then recreated them again, e.t.c).
But as SLT is not deleting all objects compleatly we have a real mess now in system. For instance we have only 5 configurations working now in system, but we have already used number 155 of mass transfer. Because of that we are expiriencing some other issues.
Is there some wise way to do system clean-up?
Thanks in advance,
Markus
Hi Markus,
There are few IUUC* tables which hold the information of the MTDs..
So you need to remove the table entries from these below 3 tables only to get rid of the old SLT Configuration.This has to be done before you create a new fresh LTRC Configuration..
IUUC_REPL_CONFIG
IUUC_REPL_CONpar
IUUC_REPL_map
Note: This is a bit risky thing to perform as you have to use the debugger screen in SE16 & delete the entries for these tables..
Regards,
Joydeep.
Similar Messages
-
Deleting obsolete logging tables in SLT system
Hi Experts,
Need help to sort out below issue,
There are many obsolete logging tables in SLT system ,might have been left out after dropping SLT schemas, previous replications.
These logging tables exist in ABAP dictionary but not in database. Due to this, it shows inconsistencies in DB02 > Diagnostics > Missing Tables and Indexes. There are in total 252 missing tables in DB. Currently DB migration is stuck due to this issue.
Is there any way to remove the tables from dictionary without deleteing them manually through SE14 ?
How to avoid having such tables ? Am I missing any steps while deleting the previous schemas?
Regards
KartikHi Kartik,
these obsolete objects/logging could be also there becasue someone refreshed/copied the systems.
There is also one transaction IUUC_REMOTE in the source system to delete the logging tables. But I am not sure if it distinguish between db or ddic level. Have a try and post the result.
Best,
Tobias -
Is there any form of system cleanup for mac air
is there any form of system cleanup for mac air
How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it. -
Technical Monitoring -SLT System - No Metrices delivered
Dear Experts,
I have configured Technical Montoring for SLT system in our landscape .
But still i could not find few metrics collecting data . It shows as no metrics delivered .
Attachment has details about the metrics .
Please help me to fix the issue and let me know for further details .
Regards
BalaHi Balamurugan,
The solution for this kind of issues are different and not fixed solutions.But please check below points to make sure you have covered all steps.
1)LMDB landscap verfication should green for managed system.
2)Managed system setup should be green .
3)In technical monitoring setup make sure you assign all templates which is valide for your managed system software components.
4)After TechMon activation check managed system extractors in "Extractors Framework" administration and make sure all extrator in active and last runs are green.
Thanks,
Prakash -
No more periodic system cleanup?
I'm not quite sure what to call it besides periodic system cleanup that happened in Tiger, but if my computer was on later (although never left it on all night really - put it to sleep when I went to bed) and restarted it the next day, some files would be in my trash to empty all the time. This seems to never be the case with my Leopard. I was just wondering if there was possibly something I'm missing out on or if there was a way to manually do it.
Since 10.4.2 they are automatically postponed and taken care of later by launchd, if your Mac is sleeping at 3:15 (daily), 3:15 (weekly) and 5:30 (monthly).
That's right you might miss some though, if you shutdown your Mac every night or in some other rare occasions,
but the main point here is that these tasks are nothing at all that so very important.
Running them once a month to stay clean is far enough (that's what I do myself. I'm not saying they are totally useless).
They were more important in the early years of Unix, when HD capacities were small and various error messages were filling log files on systems that were running without any interuption for years, 24/7/365...
Then they became a kind of fashion with Jaguar and MacJanitor, when Mac OS X was running them during the night *only if the Mac was not sleeping*.
These times are far behind, except for some utilities developers and for some advisers who are stuck in their ancien knowledge.
Now in Leopard, if we let it run we might learn that there is yet another improvement in automation, that we don't ever need to run them anymore at all, no even once a month.
Of course if we compulsively jump on the first available utility, we do what we already did in Tiger (10.4.2): we never have a chance to learn we don't need them anymore.
As for Macaroni:
Me too I tried it and advised it then when it was still a little bit useful (Jaguar and Panther). Since Tiger it's just overkill and in Leopard, hopefully 100% obsolete if Leo is now able to automate also the post-shutdown situation.
More importanly in this thread:
Needing to install third-party utilities as soon as possible, before we even begin to know well what's new and what works even better than before, is not a good approach IMO.
I would've not reacted, but I know
(for example the French forums where OnyX author is always happy to show his knowledge and feel he's so needed...)
that this utilitie's hype is going to spread so fast, implying the wrong idea that Mac OS X cannot survive without tinkering,
implying that there are no improvements in how system files are handled and cleaned.
These habits are not fed only by some "helpers" here who have a whole set of ready-to-copy-paste replies, it comes also from these, often Windows switchers, who always feel better if they have something to tinker with. -
is there a way to clean up system where all the unnecessary files are deleted. i had aperture demo preinstalled that came with my MBP and after i uninstalled it the software still does pro apps update. is part of aperture still on the system somewhere? are there a 3rd party utititys that does system cleanups?
This may help you get it took care of it. It's manual but it will work. The XLab: Uninstalling Applications
-
Software and System Cleanup--how??
I have an Ibook with an 8GB drive. I recently switched to a mac mini on my desk, but need to take the notebook on a trip and need some extra space. I am trying to install tiger to match the mac mini setup, but it wants 2.5 GB just to install. Is there a source to tell me what I need to retain on the machine for system, etc., and what can be removed? Some of these files have probably moved with me from computer to computer for 5-6 years.
For example, I find I have three library files. The oldest was in a folder by itself marked "system," and dated 2002. Since that was all that was visible, I trashed it and had immediate kernal panic which took more than 6 hours to repair and reload 10.3. I have removed all of the aps that I don't have to have, but still need some help with cleanup and removal to make additional space. What's the technique/secret? Or do I have to avoid tiger or other system upgrades from now on?Transfer all of your old "important files" to the mini (ie word docs, photos, music etc.) then reinstall OSX Tiger. I believe a clean install will clear you HD so you can get a fresh start. Transfer your files back and your set.
-
How can I re-load a table into HANA using SLT
Hi,
I am using HANA Version: 1.0.24 and SLT SAPK-91705INDMIS.
I have replicated several tables without any problems in this environment. However, when I tried to replicate T009, T009B and T009C; two tables T009B and T009C show status of replication as "Error" in both LTR and Hana Studio. Table T009 is replicated correctly.
I noticed that the table structure for T009B and T009C is created in HANA but there is no Data. Not sure what happened during replication. It seems to have stopped in between due to some error and now I have Table structures but with no data. I have tried suspend / stop and replicate but it keeps shown status as 'Error'.
Tcode LTR on SLT system shows following warnings
"Trigger exists in Source System although it is internally set as initial" for both tables.
I just want to start again and redo the load/replication of these two tables. What is the process of doing so?
Thanks
SandeepHi Sandeep,
I cannot comment on the officially supported way of deleting these triggers. Maybe the following will work,
Run the below command from SQLEditor:
insert into <schema>."RS_ORDER" values(<your_table>, null, 'C');
delete from <schema>."RS_STATUS" where TABLENAME=<your_table>
Although I think it should delete source triggers(but not sure). You do the cleanup from SLT (transaction IUUC_SYNC_MON)-->Expert Functions --> 'Delete DB triggers' , 'Delete Logging tables entries' and 'Delete Logging tables' for your table.
Also after doing this, you can check in source system (transaction IUUC_REMOTE) if triggers for your table are deleted.
Caution Again :-): I don't know if the above method is a documented and officially supported one.
Regards, Rahul -
"Program terminated in remote system NONE: Logon failed" when adding a new table
Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
ChristianFirst thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
One monitoring job (master job)
One master controller job
At least one data load job
One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
The Number of required data transfer jobs ,
plus one background work process for Central Master (Monitoring) Job (only one per system!),
plus one background work process for Master Controller Job,
plus 3-5 additional empty background work processes (recommended per configuration),
plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian -
Error when try to start the sap system in SAPMMC
Hello gurus,
I´m faccing with a serious problem, I´m trying to figure out a solution for this but I don´t get it!! My God..
Database - MS SQL 2005
System- ECC 6.0
OS- Win 2003 Server X64
When I tried to start the system by SAPMMC the system keep in with yellow semaphoro.
I checked some log file such as:
dev_disp:
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sat May 01 04:31:21 2010
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12996]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 328 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 328 (pos=2)
SiSelNRemove: removed sock 328
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 328
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3108) [dpxxdisp.c 11183]
Good Bye .....
(With continuation...)Hi again Gagan,
More information about that R3trans -d:
TRANS.log File:
4 ETW000 R3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 01.05.2010 - 17:03:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sat May 01 17:03:36 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 00000001872B0000
4 ETW000 21568 0.021568
4 ETW000 [dev trc ,00000] using "E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll" 14 0.021582
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 16 0.021598
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll 15 0.021613
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "700.08", patchlevel (0.236) 1248 0.022861
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll 20 0.022881
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll 12 0.022893
4 ETW000 [dev trc ,00000] New connection 0 created 98 0.022991
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 64 0.023055
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 49 0.023104
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 15 0.023119
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.023151
4 ETW000 [dev trc ,00000] Thread ID:2484 1126 0.024277
4 ETW000 [dev trc ,00000] Thank You for using the SLODBC-interface 17 0.024294
4 ETW000 [dev trc ,00000] Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll'
4 ETW000 39 0.024333
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 32 0.024365
4 ETW000 [dev trc ,00000] SAP patchlevel 0 12 0.024377
4 ETW000 [dev trc ,00000] SAP patchno 236 11 0.024388
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchlevel 0 13 0.024401
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchno 236 12 0.024413
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchcomment $DBCC() displays binary data as hex. string without 0x (1416409)
4 ETW000 21 0.024434
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 344 0.024778
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 102948 0.127726
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 12491 0.140217
4 ETW000 [dev trc ,00000] Driver: sqlncli10.dll Driver release: 10.00.2531 13539 0.153756
4 ETW000 [dev trc ,00000] GetDbRelease: 9.00.4035 1238 0.154994
4 ETW000 [dev trc ,00000] GetDbRelease: Got DB release numbers (9,0,4035) 59 0.155053
4 ETW000 [dev trc ,00000] The 7.00 (or earlier) ODBC based DBSL library should not be used for SAP systems running on SQL Server 2005 (release 9.0) or earlier.
4 ETW000 25 0.155078
4 ETW000 [dev trc ,00000] Please uninstall SQLNCLI 10 (SNAC10) on this application server.or set environment variable MSSQL_FORCEOLEDB.
4 ETW000 61 0.155139
4 ETW000 [dev trc ,00000] For more information please refer to SAP note 1082356 17 0.155156
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 0 performing CON [dblink#8 @ 433] 224 0.155380
4 ETW000 [dblink ,00433] ***LOG BY0=><message text not available> [dblink#8 @ 433] 19 0.155399
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PTRESAPDEV' DBNAME = 'DEV'" -
After patching XI system to SP14, disp+work not running
Hi All,
We have finished XI installation, then we also patching it from SP9->SP14 NW04s SR2. it works ok in SP9, but when we completed patching.
then when we start XI, it runs for 3-4mins, then disp+work in MMC stops.
following is the developer trace. pls help
Hardware: NT 2003 server. 3G cpu, 2G memory, 10G virtual memory
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid HXI
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, optimized
pid 2732
Mon Feb 25 15:27:35 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2732) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 25 15:27:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >CDCXI_HXI_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
DpShMCreate: allocated sys_adm at 06D30040
DpShMCreate: allocated wp_adm at 06D32090
DpShMCreate: allocated tm_adm_list at 06D36980
DpShMCreate: allocated tm_adm at 06D369B0
DpShMCreate: allocated wp_ca_adm at 071494B0
DpShMCreate: allocated appc_ca_adm at 0714F270
DpShMCreate: allocated comm_adm at 071511B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 071D2070
DpShMCreate: allocated gw_adm at 071D20B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 071D20E0
DpShMCreate: allocated wall_adm at 071D20E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Mon Feb 25 15:27:42 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=HXI
argv[7] = -DSAPMYNAME=CDCXI_HXI_00
argv[8] = -DSAPPROFILE=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Mon Feb 25 15:27:43 2008
***LOG Q0K=> DpMsAttach, mscon ( CDCXI) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >CDCXI_HXI_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Feb 25 15:27:44 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Feb 25 15:27:53 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1177) [nixxi.cpp 4361]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Feb 25 15:28:23 2008
ERROR => DpHdlDeadWp: W0 (pid 3116) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 3104) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 3072) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 3148) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 3140) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W5 (pid 3120) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 3096) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 3092) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 3136) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 3080) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W10 (pid 3172) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 3164) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 3204) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:33 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 25 07:28:33 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3116 Ended no 1 0 0
1 DIA 3104 Ended no 1 0 0
2 DIA 3072 Ended no 1 0 0
3 DIA 3148 Ended no 1 0 0
4 DIA 3140 Ended no 1 0 0
5 DIA 3120 Ended no 1 0 0
6 UPD 3096 Ended no 1 0 0
7 ENQ 3092 Ended no 1 0 0
8 BTC 3136 Ended no 1 0 0
9 BTC 3080 Ended no 1 0 0
10 BTC 3172 Ended no 1 0 0
11 SPO 3164 Ended no 1 0 0
12 UP2 3204 Ended no 1 0 0
Dispatcher Queue Statistics Mon Feb 25 07:28:33 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Feb 25 07:28:33 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Feb 25 07:28:33 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:38 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >CDCXI_HXI_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2992) (SOFT_KILL)
Stop icman
killing process (2968) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2992 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2992 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2968 HANDLE:1560)
[DpProcDied] Process died (PID:3016 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >CDCXI_HXI_00 <)
NiIMyHostName: hostname = 'CDCXI'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Feb 25 15:28:51 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2732) [dpxxdisp.c 10417]
Good Bye .....Yes, I have, following is dev_w0, thank you in advance.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Feb 25 15:40:12 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno 00
M sid HXI
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 133
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2052
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2052) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4270848 (21248)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
M DpShMCreate: allocated sys_adm at 06D30040
M DpShMCreate: allocated wp_adm at 06D32090
M DpShMCreate: allocated tm_adm_list at 06D36980
M DpShMCreate: allocated tm_adm at 06D369B0
M DpShMCreate: allocated wp_ca_adm at 071494B0
M DpShMCreate: allocated appc_ca_adm at 0714F270
M DpShMCreate: allocated comm_adm at 071511B0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 071D2070
M DpShMCreate: allocated gw_adm at 071D20B0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 071D20E0
M DpShMCreate: allocated wall_adm at 071D20E8
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Mon Feb 25 15:40:13 2008
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host CDCXI
M
M Mon Feb 25 15:40:14 2008
M calling db_connect ...
C Prepending C:\usr\sap\HXI\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:15 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Detaching from DB Server (con_hdl=0,svchp=07326668,srvhp=07338264)
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:16 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10380]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server CDCXI_HXI_00 on host CDCXI (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Feb 25 15:40:16 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10585
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2052) [dpnttool.c 327] -
AS 70SR2 (WP's) stops when connecting to upgraded system.
Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid S23
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 179
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ; 1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01 <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ; 12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ; 1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ; 15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1680 Ended no 2 0 0
1 DIA 2152 Ended no 1 0 0
2 DIA 720 Ended no 2 0 0
3 DIA 2556 Ended no 1 0 0
4 DIA 2212 Ended no 2 0 0
5 DIA 1908 Ended no 2 0 0
6 BTC 1136 Ended no 2 0 0
7 BTC 1284 Ended no 1 0 0
8 BTC 888 Ended no 2 0 0
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
| Typ | now | high | max | writes | reads |
--------++++--
+
| NOWP | 0 | 2 | 2000 | 11 | 11 |
--------++++--
+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--
+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 11, udp 9 ( 81%), shm 2 ( 18%)
since last update total 11, udp 9 ( 81%), shm 2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
| id | owner | pid | eyecatcher |
--------++--
+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2812 HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2812 HANDLE:512)
wait for end of icman
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2764 HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ; 12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ; 10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Oct 03 12:40:02 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B New connection 0 created
M sysno 01
M sid S23
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 179
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1680
M
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ; 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11024 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M DpShMCreate: allocated sys_adm at 000000000F7B0050
M DpShMCreate: allocated wp_adm at 000000000F7B1C90
M DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M DpShMCreate: allocated tm_adm at 000000000F7B4800
M DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M DpShMCreate: allocated comm_adm at 000000000FCC4670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M DpShMCreate: allocated gw_adm at 000000000FD4B370
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000FD4B3A0
M DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Fri Oct 03 12:40:03 2008
M ThInit: running on host dksnss23ap3
M calling db_connect ...
C Prepending D:\usr\sap\S23\D01\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ; 438]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1680)
When : 10/3/2008 12:40:3.953
Threads : 2
Computer Name : DKSNSS23AP3
User Name : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Fri Oct 03 12:40:04 2008
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M pid = 1680
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Oct 03 12:40:04 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10754
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ; 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ; 333]
M return from clean-up function ...You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan -
Java Enhancement Package upgrade kill my system
Hi all!
After upgrading Java part via JSPM, my system crash. Here is log of my disp+work process.
OS:Windows 2003, DB: Oracle 10.2, java: 1.4.13 (with this version of Java all worked fine).
Here is my disp+work log:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CN3
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 3664
Fri Feb 22 15:47:25 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3664) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 22 15:47:30 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >srvnova03_CN3_00 <
DpShMCreate: sizeof(wp_adm) 20104 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06100040, size: 4893744)
DpShMCreate: allocated sys_adm at 06100040
DpShMCreate: allocated wp_adm at 06102090
DpShMCreate: allocated tm_adm_list at 06106F18
DpShMCreate: allocated tm_adm at 06106F48
DpShMCreate: allocated wp_ca_adm at 06510388
DpShMCreate: allocated appc_ca_adm at 06516148
DpShMCreate: allocated comm_adm at 06518088
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06598F48
DpShMCreate: allocated gw_adm at 06598F88
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06598FB8
DpShMCreate: allocated wall_adm at 06598FC0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Feb 22 15:47:31 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Feb 22 15:47:32 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3992
argv[0] = E:\usr\sap\CN3\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\CN3\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\CN3\SYS\profile\CN3_DVEBMGS00_srvnova03
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2268
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CN3
argv[7] = -DSAPMYNAME=srvnova03_CN3_00
argv[8] = -DSAPPROFILE=E:\usr\sap\CN3\SYS\profile\CN3_DVEBMGS00_srvnova03
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Fri Feb 22 15:47:33 2008
***LOG Q0K=> DpMsAttach, mscon ( srvnova03) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >srvnova03_CN3_00 <)
DpStartStopMsg: start msg sent
Fri Feb 22 15:47:34 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Feb 22 15:47:40 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Feb 22 15:47:46 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
Fri Feb 22 15:47:47 2008
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Feb 22 15:49:27 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
Fri Feb 22 15:49:28 2008
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1508
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2275) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3992)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Feb 22 15:49:34 2008
ERROR => W2 (pid 3308) died [dpxxdisp.c 14441]
Fri Feb 22 15:49:35 2008
ERROR => W4 (pid 2864) died [dpxxdisp.c 14441]
ERROR => W5 (pid 2832) died [dpxxdisp.c 14441]
ERROR => W7 (pid 736) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbb
ERROR => W8 (pid 1396) died [dpxxdisp.c 14441]
ERROR => W11 (pid 1168) died [dpxxdisp.c 14441]
J2EE server info
start = TRUE
state = STARTED
pid = 4524
argv[0] = E:\usr\sap\CN3\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\CN3\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\CN3\SYS\profile\CN3_DVEBMGS00_srvnova03
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2357
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CN3
argv[7] = -DSAPMYNAME=srvnova03_CN3_00
argv[8] = -DSAPPROFILE=E:\usr\sap\CN3\SYS\profile\CN3_DVEBMGS00_srvnova03
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Fri Feb 22 15:49:42 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1592
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2358) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4524)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Feb 22 15:49:54 2008
ERROR => W0 (pid 2876) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3224) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbb --> 0xba
ERROR => W6 (pid 708) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xba --> 0xb8
ERROR => W9 (pid 3176) died [dpxxdisp.c 14441]
ERROR => W10 (pid 2928) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W12 (pid 760) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W13 (pid 3500) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1645
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 22 15:50:04 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 22 12:50:05 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2876 Ended no 1 0 0
1 DIA 2932 Ended no 1 0 0
2 DIA 3308 Ended no 1 0 0
3 DIA 3224 Ended no 1 0 0
4 DIA 2864 Ended no 1 0 0
5 DIA 2832 Ended no 1 0 0
6 UPD 708 Ended no 1 0 0
7 ENQ 736 Ended no 1 0 0
8 BTC 1396 Ended no 1 0 0
9 BTC 3176 Ended no 1 0 0
10 BTC 2928 Ended no 1 0 0
11 SPO 1168 Ended no 1 0 0
12 SPO 760 Ended no 1 0 0
13 UP2 3500 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 22 12:50:05 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
8
8
2000
8
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 16
wake_evt_udp_now 0
wake events total 12, udp 8 ( 66%), shm 4 ( 33%)
since last update total 12, udp 8 ( 66%), shm 4 ( 33%)
Dump of tm_adm structure: Fri Feb 22 12:50:05 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 22 12:50:05 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
Fri Feb 22 15:50:05 2008
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1645
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 22 15:50:10 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >srvnova03_CN3_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1108) (SOFT_KILL)
Stop icman
killing process (1172) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1108 HANDLE:1616)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1645
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 22 15:50:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1108 HANDLE:1616)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1645
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 22 15:50:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1108 HANDLE:1616)
wait for end of icman
[DpProcDied] Process died (PID:1172 HANDLE:1624)
[DpProcDied] Process died (PID:4524 HANDLE:1584)
DpStartStopMsg: send stop message (myname is >srvnova03_CN3_00 <)
NiIMyHostName: hostname = 'srvnova03'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Feb 22 15:50:13 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1540 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1540 (pos=3)
SiSelNRemove: removed sock 1540
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/14
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1540
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3664) [dpxxdisp.c 10371]
Good Bye .....
Thanks for attention
ArtemHi all!
Now my dispatcher process working in yellow light. But Java status info unavailable.
When I'm trying to execute go.bat or configtool.bat they cann't connect to DB. Can I reset password, which is using for JavaDB part connection? I'm not sure that password is correct... :\
Thanks,
Artem -
Hi Gurus,
I have installed a system (DEV) in Windows 2003 and Oracle 10.2.0.4.0. This installation works fine. Now, i wish install a new system (QAS) in the same server, for this i installed again Oracle, other database. When i run the sapinst, choose the new installation for Oracle, but the process installation stops in the step 10 of 47, Configure Oracle server network. The log say
ERROR 2009-07-21 00:06:13.859
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable E:\oracle\CPQ\102/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-07-21 00:06:13.921
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable E:\oracle\CPQ\102/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-07-21 00:06:13.953
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR ( Last error reported by the step :Error return code. DIAGNOSIS: Return code 1 of executable E:\oracle\CPQ\102/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.).
In the listener log:
LSNRCTL for 64-bit Windows: Version 10.2.0.1.0 - Production on 21-JUL-2009 00:04:36
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=CPQ.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=CPQ))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=desarrollo)(PORT=1527))
The command completed successfully
Can you help me please in find solution for this?
thanks in advance
Alberto GilHi,
thanks for all,
I follow the step MCOD and launch the QAS installation but, after waiting a long time, in the phase Create Database schema (near 14 hours), in the step Import ABAP stop the installation and the DEV system donu00B4t works. The error in the installation is:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090722104047
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12154
DbSl Trace: CONNECT failed with sql error '12154'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12154
DbSl Trace: CONNECT failed with sql error '12154'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12154
DbSl Trace: CONNECT failed with sql error '12154'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12154
DbSl Trace: CONNECT failed with sql error '12154'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\CPQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090722104123
AND THE ERROR IN THE STARTUP DEV SYSTEM IS:
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2000) (SOFT_KILL)
Stop icman
killing process (3668) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2000 HANDLE:176)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:29 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2000 HANDLE:176)
wait for end of icman
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:30 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:31 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:32 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:33 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:34 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:35 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:36 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:37 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:38 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:39 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3668 HANDLE:184)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:40 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3668 HANDLE:184)
[DpProcDied] Process lives (PID:3708 HANDLE:160)
DpHalt: disconnect j2ee listener
DpHalt: wait for end of j2ee server
[DpProcDied] Process lives (PID:3708 HANDLE:160)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1053
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jul 22 10:25:41 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3708 HANDLE:160)
DpStartStopMsg: send stop message (myname is >desarrollo_CPD_00 <)
NiIMyHostName: hostname = 'desarrollo'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Wed Jul 22 10:25:42 2009
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12710]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 28 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 28 (pos=3)
SiSelNRemove: removed sock 28
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/32
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 28
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2380) [dpxxdisp.c 10908]
Good Bye .....
Pleeease help me .... i have a project stop!!
Edited by: Alberto Gil on Jul 22, 2009 11:17 AM -
GRC AC 10 (RAR/CUP/ERM) configuration for EP system
Hello Gurus,
We are aware of configuring RAR/CUP/ERM in GRC AC 10 for ERP system(back-end)
Are there any documents /links to provide information on configuring the above components for EP system ??
Or rather specific which of the following configuration is possible for EP system ?? CUP /RAR/ ERM ??
Also going further , is there any way in which we can configure the same for BO system ??
I am not quite sure if there is any PLUG-In as such which is available for BO system or not .
But in my opinion there is no need to perform configuration for BOBJ system as the roles in them are imported from Backend system (ERP/BI etc) , hence if these roles are already taken care during ERP system cleanup and SOD analysis , there should be no need to configure seperately RAR/ERM/CUP.
Please provide your comments.
Regards,
VictorHello Prasad,
Thank You for your quick response .. the info was quite helpful.
Will you please put some light on aspects of integrating AC 10 with BO ??
Is there any connecter available for it?? Which scenarios are possible ??
Humbly Requesting your help.
Thanks in advance.
Regards,
Victor
Maybe you are looking for
-
My photo albums are no longer alphabetical after ios5 update
I upgraded my Ipad 2 & ipod touch 4g to ios 5. My photo albums which sync to photoshop elements are no longer alphabetical which now makes it a pain to locate photos. What can I do?
-
What does E_ADEPT_XML_SYNTAX mean.. The downloaded acsm-file does not open in Adobe Digital Editions
downloaded Adobe Digital Editions 4, and registered computer, verified email and then downloaded e-book from retailer, but the acmsfile does not want to open. This is very frustrating
-
How to visualise continues Data aquisition from a PCI 6602 with 2121 BNC connector board in C++ ?
Hello everyone, We are trying to get on the screen the aquired pulses from our PCI 6602 with a 2121 BNC connector board, from several devices. We are able to read the data and save without problem, but we cannot look at it while we are measuring. An
-
Dear, I am very new and trying my best to write a program - to read, search and print the student record - name, id and GPA. Now, I get the 2 errors to run my class. Please advise Your advice would be appreciated. thanks 1. Add Class : import java.io
-
Problem weblogic 9.2 with quartz and log4j : url-template-config.xml
Hello, I configure a Servlet Quartz to run when WebLogic 9.2 starts, but i have an exception, here is my log : 2009-04-15 11:52:52,424 ERROR Logger.error(): Exception while loading URL templates, /WEB-INF/url-template-config.xml Throwable: javax.serv