Sluggish performance, iPhone 4S
Anyone else having these issues and if so, have you fixed it?
1. while texting the text does not keep up with the touch, I'm a slow texter and there is a definate lag between the press of a letter and when it displays, this is a recent issue that I have not had before,
2. From the wallpapers HD app I downloaded the march calendar photo but if I'm plugged into my charger the wallpaper will not show any longer (this is also new)
3. I went to turn my phone off and after holding the button and expecting the slider to show up, the screen simply went black but did not shut off, I did not get a slider, and after a couple of minutes, if I pressed the volumn up down buttons they would appear on the black screen, I pressed the button again and no joy, a 3rd time and the phone just came back on to my home screen, it would not shut off.
All of these issues have shown up in the last 48-72 hours and about a full week+ after the last software update (6.1.2)
anyone??
Thanks
my 4S was also affected following the iOS 8.0 update, really slow. A restore from backup (done just before restoring) solved that.I don't think 8.0.2 will help, it's not meant to fix this, while a restore from backup will reinstate settings and data properly, getting you rid of unneeded junk left by the upgrade (temp stuff etc...).
Similar Messages
-
Sluggish performance with OSX 10.9.2?
Since the automatic download of OSX 10.9.2, Cloud 2.0.1, and Tunes 11.1.5 on 26 Feb 2014, I have had prolonged periods of "sluggish" performance on my iMac; slow to open Safari and my home page, very slow sending of email and frequent need to re-enter "sites" to get to the location.
I have brief periods where operating my iMac is a "breeze;" instant connection to Safari and my home page, quick sending of email, and instant entry to web-sites I selected.
And, when I've tried to re-store my 5 and 5s iPhones on iTunes due to rapid battery depletion; I'm informed that "tones" that I've used on the iPhones previously cannot be "copied" to the iPhones.
Any similiar problems? Suggestions?
KulbiskiActivity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information
Did you just upgrade to IOS 7/7.1? I have some programs that are not compatible and won't down load. Perhaps the tones are the same. -
Sluggish performance in Windows 8.1
I'm observing very sluggish performance in Firefox on my Surface Pro using Windows 8.1 RTM. I can't quite track down what's going on, but some startups take as much as 10-12 seconds. Additionally, the overall browser performance is sluggish.
I've tried running in Safe Mode and it's still quite slow.Ok, tried running Nightly. Still seeing VERY poor performance.
-
Since upgrading to Leopard (on my MacBook Pro) Safari shows a very sluggish performance, page take over 10 seconds to load. I cleared the cache but the problem persists. Any ideas?
Have you guys ran REPAIR DISK PERMISSIONS? and Cleaned out the disk cache?
Have you tried to startup the computer and holding SHIFT down (old extensions off trick)?
See if problems persist after these things. Sometimes it's a 3rd party app or extension. I've seen these issues from all the freeware shareware stuff over the various versions of Mac OS X. -
MacBook Pro 13" Retina running 10.9.5 sluggish performance
My 13" Retina MBP 512GB/8GB RAM running 10.9.5 has been running very sluggish recently. Doesn't appear to be any obvious problems other than Adobe Flash crashes almost hourly while web browsing. Here is my EtreCheck report:
Problem description:
Sluggish performance
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 10:32:28 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro11,1
1 2.8 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 81
Video Information: ℹ️
Intel Iris
Color LCD 2560 x 1600
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 1:28:24
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.42 GB (99.61 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 44
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.zeroonetwenty.BlueHarvestHelper.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
Flux UNKNOWN (missing value)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
BlueHarvest Application (/Applications/BlueHarvest.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% firefox
2% hidd
1% WindowServer
1% plugin-container
1% mdworker
Top Processes by Memory: ℹ️
593 MB firefox
163 MB ocspd
155 MB mds_stores
137 MB plugin-container
120 MB Microsoft Outlook
Virtual Memory Information: ℹ️
4.24 GB Free RAM
2.50 GB Active RAM
985 MB Inactive RAM
870 MB Wired RAM
787 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 09:03:52 AM Self test - passed
Feb 26, 2015, 01:26:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 2625_[redacted].crash
Feb 26, 2015, 01:11:03 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 1103_[redacted].crash
Feb 26, 2015, 12:34:59 PM /Library/Logs/DiagnosticReports/firefox_2015-02-26-123459_[redacted].hang
Feb 26, 2015, 12:34:57 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-12 3457_[redacted].crash
Feb 24, 2015, 06:46:27 PM /Library/Logs/DiagnosticReports/firefox_2015-02-24-184627_[redacted].hang
Feb 24, 2015, 06:46:22 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-24-18 4622_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1266 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Extremely sluggish performance with Mavericks
Hardware Information:
MacBook Pro (13-inch, Mid 2010)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9 (13A603) - Uptime: 34 days 8:53:54
Disk Information:
ST9500423AS disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (83.55 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
com.nvidia.CUDA (1.1.0)
Startup Items:
CUDA: Path: /System/Library/StartupItems/CUDA
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] cn.com.zte.PPPMonitor.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.rim.BBDaemon.plist 3rd-Party support link
[System] PPPMonitord.plist 3rd-Party support link
Launch Agents:
[System] cn.com.zte.usbswapper.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[System] com.nvidia.CUDASoftwareUpdate.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.rim.BBAlbumArtCacher.plist 3rd-Party support link
[System] com.rim.BBLaunchAgent.plist 3rd-Party support link
[System] Swapper.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
iTunesHelper
Vodafone Mobile Broadband
VMCStatusMenu
Internet Plug-ins:
JavaAppletPlugin: Version: Java 7 Update 25 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 10.1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
CUDA Preferences 3rd-Party support link
Flash Player 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
Audacity: Version: 2.0.3.0 - SDK 10.4 3rd-Party support link
/Applications/Audacity/Audacity.app
/Applications/iWork '09
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
dynamiclinkmediaserver: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
26% firefox
3% mds_stores
2% plugin-container
1% Dock
1% hidd
Top Processes by Memory:
467 MB firefox
61 MB Safari
33 MB WindowServer
29 MB System Preferences
29 MB plugin-container
Virtual Memory Information:
26 MB Free RAM
747 MB Active RAM
730 MB Inactive RAM
725 MB Wired RAM
16.74 GB Page-ins
1.61 GB Page-outsLaunch Daemons:
[System] com.rim.BBDaemon.plist 3rd-Party support lin
Launch Agents:
[System] com.rim.BBAlbumArtCacher.plist 3rd-Party support link
[System] com.rim.BBLaunchAgent.plist 3rd-Party support link
There may be other software that is causing your problem, but the Blackberry software regularly crops up as being the cause of slow-downs or unpredictable behaviour. Try uninstalling it using the uninstaller that is hopefully available from Blackberry.
Hopefully others will spot this thread and have some other suggestions. There are a few entries for things I've never heard of (not that that means much ), but there's a chance that they are not compatible with Mavericks and could be contributing to the sluggish performance. -
Hello friends
My PC config is as follows:
OS: Win 7 64bit
CPU: Intel Core2Duo E4300 1.8GHz
RAM: 5GB DDR2
Graphics Card: ATi Radeon 4700 512MB DDR5
HDDs: 160GB, 250GB, 500GB (all SATA) and 80GB (IDE aka PATA)
AV: Avast
Firewall: Comodo
Lr installation: in a separate partition than the default "C:\" of 160GB one (but on the same physical HDD).
I am trying this version of Lr, but I find the performance is extremely sluggish. Mainly the problem occurs whenever a real time rendering is required, for example showing the mask overlay, or the noise and sharpening preview (which can be viewed by pressing Alt key while changing the respective slider). I do not use any other software while working with Lr. Compared to the minimum system requirement of Lr, I believe my PC's config (though old) is quite adequate, still why do I get so sluggish performance? Is there any settings that I should change in Lr to get better performance?
Please help me out.
Thank you.Hi SRoyC,
Well, I'm somewhat outside my area of expertise at this point, since what I'm saying is based on:
* reading
* adding 2 (from what I've gathered in forums), + 2 (related experience).
In otherwords I have no direct experience with i7 processors m'self.
But,
* I've seen a lot of posts of cpu utilization showing <50% cpu utilization (running Lightroom I mean) on souped up systems, and so far none showing >50% - not for more than a "microsecond" anyway.
and
I've read that even in gaming systems users are getting less bang from bucks out of money spent for cpus, past a certain point, these days..
In the old days, it was easy: operations were either bound by cpu or disk. Such is no longer the case, and I haven't kept up with modern CPU architecture well enough to understand or explain details, but you can't get much faster Lr performance by faster disk nor beefier cpus these days - there's some other bottle-neck(s)... - maybe somebody else understands better, but beware a lot of people talk like they know when they don't - they just know they know more than you do and have a good story line ...
So, my guess: i7 won't serve so much better than an i5 (or similarly priced AMD chip) that it would be worth sinking your money there even if it's tight, and so if i7 really expensive where you are, maybe money would be better spent elsewhere (or put in the bank..).. - just my guess... - may not even perform better at all, but as I said: I really dunno for sure...
To be clear: abnormally slow performance is almost always caused be some element in your system that is tripping up Lr (and when I say system: I mean it could be a byte in a data file too, as well as hardware/software..), and NOT due to system spec.
Often Adobe remedies by software changes, but still - until then you gotta trouble-shoot your system/files if you want it to run fast.
PS - I run an AMD Phenom II X4 965 (and SSDs for critical drives), and I get full core utilization (i.e. 100% utilization of all 4 cores, for short intervals anyway - most of the time <100%) and good performance - I've heard claims of faster performance, but I've also heard claims of a lot slower performance by people with beefier systems.
PPS - I just reviewed your current system and it is indeed under powered. I recommend at least 4 cores (6 would be better, dunno 'bout 8, for Lr purposes I mean), at least 3GHz (faster is generally better, but again: past a certain point the cpu will just be idle so no gain), at least 8GB RAM (12-16G if you can afford it, usually more ram than that won't help much if at all). If Lr not working optimally on such a system, then it's time to break out the trouble-shooting handbook...
To reiterate: I'm not sure if a 12-core, 5GHz system with 32GB ram would be significantly faster than a 6-core, 3.5GHz system with 12GB ram, maybe not any.
Also: most operations when Lr is lagging are not stressing the disk much (e.g. the time it takes Lr to read an entire raw file and/or catalog photo record is generally not the problem, so SSDs will help a little, but only a little - surprisingly little..). Granted, it depends on the operation - whole-catalog metadata consolidation: yes, but when editing a single photo in develop module - disk speed makes little difference (except a skosh when initially loading).
~R. -
Sluggish performance - Mac Mini and MBP?
I'm experiencing sluggish performance on my Mac Mini with Leopard (upgrade installation) when using the genie effect, expose, spaces, gadgets, 3d dock, etc. It's jerky, as if the animation is missing frames. Is it related to the graphics card? I also find my finder painfully slow opening folders.... Any other people experiencing this? Are there any solutions available?
Exactely the same here. I had to disable the 3D dock alltogether, admittedly not a big loss. Sluggishness seems to worsen with a 'complex' desktop picture (graphics card - texture issue?). Also, and most annoyingly, I find that text rendering seems to be much worse, e.g. look at the system menu with an all black or white desktop background. Or a SoulseeX window on top of some other (Carbon app with opacity set to 90% per default). This is a litte better if I set the display to a '2.2 Television gamma' (I have a 23" Cinema display). One thing that i will try is to boot back into 10.4 and see if it's just my imagination but I am pretty sure it's not.
-
Sluggish performance- hardware test?
How can I run a Hardware/performance test on my Mac pro 2008(early).
2X3 GHz Quad-Core Xeon.
I am getting very sluggish performance from Motion and Avid programs.
Honestly I saw very little performance increase compared to my old Quad PPC.
I installed 16 gigs RAM from OWC.
ATI Radeon HD 4870 and a eSATA video RAID.
By all accounts this machine should be cooking- but it doesn't.
I ran DW on the Boot drive- but I still have issues.
I have read so much praise for the 2008's as great machines- so I just don't understand why I get so many hang ups.Clone your drive (SuperDuper) so you have an exact backup image.
Question: did you migrate your apps from G5? It sounds like you did.
The nice thing about SuperDuper is it skips all the clutter (cache, temp, logs etc) and optimizes folder and free space.
Are you using drives from G5 that have not been reformatted?
I'm sure there are other things to look for under the hood. -
[webgl] sluggish performance ( /dev/nvidia0 Operation not permitted )
We (folks on #archlinux already tried helping) have been at this for hours now... no solution found yet.
summary: webgl works but performance is sluggish(20 to 30fps) which makes me assume it's falling back to software rendering for some unknown reason
already tried many things: vmalloc kernel parameters, irq control left to bios/archlinux, being in the video group, not being in the video group, having an xorg.conf, not having an xorg.conf, different AGP aperture sizes in BIOS, regular gl performance is normal (60 fps (capped to display refresh) in glxgears), only webgl slugs, card (GT 7600 256MB VRAM) should support the required shader language version for webgl (and webgl performance is only sluggish in linux... so I think it must be a configuration issue on some driver/kernel/browser setting?)
Different browsers show different messages when started from the console but I don't know what to make of those and googling them did not reveal any solutions so far either.
browsers tested: firefox, google-chrome(from AUR), chromium
window managers tested: enlightenment, fluxbox
kernel: linux-lts
driver: nvidia-304xx-lts (can not use Nouveau as Nouveau keeps locking up the GPU)
It's a fresh archlinux installation (Ubuntu had the same performance problem btw in case that might be useful to know for looking for the cause).
Everything I tried so far, did not change anything about the sluggish webgl performance problem.
One thing I noticed is that /dev/nvidia0 and /dev/nvidiactl both do not exist until after "startx". Could that be a problem?
Here are some logs, hoping someone sees something which looks suspicious and knows what else I could try to make it work.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005ffc0000-0x000000005ffcffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005ffd0000-0x000000005fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: ASUSTek Computer Inc. K8N-E-Deluxe/'K8N-E-Deluxe', BIOS 1012.007 01/18/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] e820: last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5fa00000-0x5fbfffff]
[ 0.000000] [mem 0x5fa00000-0x5fbfffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5f9fffff]
[ 0.000000] [mem 0x5c000000-0x5f9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x5fc00000-0x5ffbffff]
[ 0.000000] [mem 0x5fc00000-0x5fdfffff] page 2M
[ 0.000000] [mem 0x5fe00000-0x5ffbffff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x5fc97000-0x5ffbffff]
[ 0.000000] ACPI: RSDP 00000000000f9cb0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 000030 (v01 A M I OEMRSDT 01000618 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 000081 (v02 A M I OEMFACP 01000618 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0400 004524 (v01 A0055 A0055003 00000003 INTL 02002026)
[ 0.000000] ACPI: FACS 000000005ffd0000 000040
[ 0.000000] ACPI: APIC 000000005ffc0390 000068 (v01 A M I OEMAPIC 01000618 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffd0040 000041 (v01 A M I OEMBIOS 01000618 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005ffbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5ffbffff]
[ 0.000000] NODE_DATA [mem 0x5fc92000-0x5fc96fff]
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005dc00000-ffff88005f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5ffbffff]
[ 0.000000] On node 0 totalpages: 393054
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6079 pages used for memmap
[ 0.000000] DMA32 zone: 389056 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fa00000 s86656 r8192 d23936 u2097152
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386890
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ e0000000 size 256 MB
[ 0.000000] Memory: 1532388K/1572216K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 39828K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6291456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2210.711 MHz processor
[ 0.010032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.42 BogoMIPS (lpj=22107110)
[ 0.010037] pid_max: default: 32768 minimum: 301
[ 0.010061] ACPI: Core revision 20131218
[ 0.020405] ACPI: All ACPI Tables successfully acquired
[ 0.020642] Security Framework initialized
[ 0.020671] Yama: becoming mindful.
[ 0.020955] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025410] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.027465] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.027473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.028144] Initializing cgroup subsys memory
[ 0.028166] Initializing cgroup subsys devices
[ 0.028170] Initializing cgroup subsys freezer
[ 0.028173] Initializing cgroup subsys net_cls
[ 0.028177] Initializing cgroup subsys blkio
[ 0.028234] tseg: 0000000000
[ 0.028253] mce: CPU supports 5 MCE banks
[ 0.028279] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.034575] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.035713] ftrace: allocating 20111 entries in 79 pages
[ 0.049994] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.150150] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 0c, stepping: 00)
[ 0.160000] Performance Events: AMD PMU driver.
[ 0.160000] ... version: 0
[ 0.160000] ... bit width: 48
[ 0.160000] ... generic registers: 4
[ 0.160000] ... value mask: 0000ffffffffffff
[ 0.160000] ... max period: 00007fffffffffff
[ 0.160000] ... fixed-purpose events: 0
[ 0.160000] ... event mask: 000000000000000f
[ 0.160000] x86: Booted up 1 node, 1 CPUs
[ 0.160000] smpboot: Total of 1 processors activated (4421.42 BogoMIPS)
[ 0.160000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.160000] devtmpfs: initialized
[ 0.160000] PM: Registering ACPI NVS region [mem 0x5ffd0000-0x5fffffff] (196608 bytes)
[ 0.160000] pinctrl core: initialized pinctrl subsystem
[ 0.160056] RTC time: 14:37:08, date: 11/06/14
[ 0.160148] NET: Registered protocol family 16
[ 0.160332] cpuidle: using governor ladder
[ 0.160334] cpuidle: using governor menu
[ 0.160347] node 0 link 0: io port [1000, ffffff]
[ 0.160351] TOM: 0000000060000000 aka 1536M
[ 0.160356] node 0 link 0: mmio [a0000, bffff]
[ 0.160359] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.160363] bus: [bus 00-ff] on node 0 link 0
[ 0.160365] bus: 00 [io 0x0000-0xffff]
[ 0.160367] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.160369] bus: 00 [mem 0x60000000-0xfcffffffff]
[ 0.160397] ACPI: bus type PCI registered
[ 0.160401] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.160498] PCI: Using configuration type 1 for base access
[ 0.161627] bio: create slab <bio-0> at 0
[ 0.161792] ACPI: Added _OSI(Module Device)
[ 0.161794] ACPI: Added _OSI(Processor Device)
[ 0.161795] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161797] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163305] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164921] ACPI: Interpreter enabled
[ 0.164937] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.164955] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.164958] ACPI: Using IOAPIC for interrupt routing
[ 0.164998] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.165137] ACPI: No dock devices found.
[ 0.170533] ACPI: Power Resource [ISAV] (on)
[ 0.173609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.173619] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.173626] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.173736] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.173739] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.173742] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.173745] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xff7bffff] (ignored)
[ 0.173749] PCI: root bus 00: hardware-probed resources
[ 0.173755] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173915] PCI host bridge to bus 0000:00
[ 0.173919] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173922] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.173925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.173928] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
[ 0.173943] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[ 0.173955] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.174087] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[ 0.174184] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[ 0.174192] pci 0000:00:01.1: reg 0x10: [io 0x5080-0x509f]
[ 0.174203] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
[ 0.174207] pci 0000:00:01.1: reg 0x24: [io 0x5040-0x507f]
[ 0.174221] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.174311] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[ 0.174319] pci 0000:00:02.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.174342] pci 0000:00:02.0: supports D1 D2
[ 0.174345] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174378] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.174441] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[ 0.174448] pci 0000:00:02.1: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.174472] pci 0000:00:02.1: supports D1 D2
[ 0.174474] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174506] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.174565] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[ 0.174573] pci 0000:00:02.2: reg 0x10: [mem 0xfebffc00-0xfebffcff]
[ 0.174602] pci 0000:00:02.2: supports D1 D2
[ 0.174605] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174652] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.174721] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[ 0.174728] pci 0000:00:05.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.174733] pci 0000:00:05.0: reg 0x14: [io 0xec00-0xec07]
[ 0.174755] pci 0000:00:05.0: supports D1 D2
[ 0.174758] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174790] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.174854] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[ 0.174861] pci 0000:00:06.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.174866] pci 0000:00:06.0: reg 0x14: [io 0xe400-0xe47f]
[ 0.174870] pci 0000:00:06.0: reg 0x18: [mem 0xfebfb000-0xfebfbfff]
[ 0.174890] pci 0000:00:06.0: supports D1 D2
[ 0.174967] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[ 0.174983] pci 0000:00:08.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.175075] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[ 0.175082] pci 0000:00:0a.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.175087] pci 0000:00:0a.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.175092] pci 0000:00:0a.0: reg 0x18: [io 0x0970-0x0977]
[ 0.175096] pci 0000:00:0a.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.175101] pci 0000:00:0a.0: reg 0x20: [io 0xc800-0xc80f]
[ 0.175105] pci 0000:00:0a.0: reg 0x24: [io 0xc400-0xc47f]
[ 0.175191] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[ 0.175286] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[ 0.175325] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.175388] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.175468] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.175549] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.175627] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.175752] pci 0000:01:00.0: [10de:02e0] type 00 class 0x030000
[ 0.175770] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.175780] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[ 0.175790] pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfcffffff]
[ 0.175821] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.175934] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.175940] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.175943] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.175986] pci 0000:02:0b.0: [1106:3044] type 00 class 0x0c0010
[ 0.175998] pci 0000:02:0b.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
[ 0.176005] pci 0000:02:0b.0: reg 0x14: [io 0xbc00-0xbc7f]
[ 0.176047] pci 0000:02:0b.0: supports D2
[ 0.176049] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
[ 0.176124] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.176127] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.176130] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.176957] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.177043] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 0.177127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.177211] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.177294] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 0.177374] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
[ 0.177454] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 0.177533] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 0.177612] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
[ 0.177706] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
[ 0.177786] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 0.177867] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 0.177947] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 0.178035] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 0.178144] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 0.178495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178498] vgaarb: loaded
[ 0.178499] vgaarb: bridge control possible 0000:01:00.0
[ 0.178573] PCI: Using ACPI for IRQ routing
[ 0.178578] PCI: pci_cache_line_size set to 64 bytes
[ 0.178617] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.178621] e820: reserve RAM buffer [mem 0x5ffc0000-0x5fffffff]
[ 0.178834] NetLabel: Initializing
[ 0.178836] NetLabel: domain hash size = 128
[ 0.178838] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.178866] NetLabel: unlabeled traffic allowed by default
[ 0.178945] Switched to clocksource refined-jiffies
[ 0.193118] pnp: PnP ACPI init
[ 0.193168] ACPI: bus type PNP registered
[ 0.193275] pnp 00:00: [dma 4]
[ 0.193336] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193439] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193480] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193867] pnp 00:04: [dma 2]
[ 0.193932] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.194190] pnp 00:05: [dma 3]
[ 0.194334] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.194597] pnp 00:06: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.194863] system 00:07: [io 0x0190-0x0193] has been reserved
[ 0.194867] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.194870] system 00:07: [io 0x4000-0x40ff window] has been reserved
[ 0.194873] system 00:07: [io 0x4400-0x44ff window] has been reserved
[ 0.194876] system 00:07: [io 0x4800-0x48ff window] has been reserved
[ 0.194881] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194987] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.194990] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.194993] system 00:08: [mem 0xff780000-0xff7bffff] has been reserved
[ 0.194996] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195070] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.195231] system 00:0a: [io 0x0480-0x0487] has been reserved
[ 0.195234] system 00:0a: [io 0x0d00-0x0d07] has been reserved
[ 0.195237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195468] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.195722] pnp 00:0c: [dma 0 disabled]
[ 0.195790] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196055] pnp 00:0d: [dma 0 disabled]
[ 0.196135] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196351] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.196355] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.196358] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.196360] system 00:0e: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.196363] system 00:0e: [mem 0xff7c0000-0xffffffff] has been reserved
[ 0.196366] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.196611] pnp: PnP ACPI: found 15 devices
[ 0.196613] ACPI: bus type PNP unregistered
[ 0.203623] Switched to clocksource acpi_pm
[ 0.203683] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.203692] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.203696] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.203702] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.203705] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.203709] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.203715] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.203718] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.203720] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
[ 0.203723] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
[ 0.203726] pci_bus 0000:01: resource 2 [mem 0xba800000-0xda7fffff pref]
[ 0.203730] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.203732] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.203816] NET: Registered protocol family 2
[ 0.204157] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204482] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.204915] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.205152] TCP: reno registered
[ 0.205159] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205233] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205488] NET: Registered protocol family 1
[ 0.205869] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.290220] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 0.370210] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 0.370416] pci 0000:01:00.0: Boot video device
[ 0.370423] PCI: CLS 32 bytes, default 64
[ 0.370570] Unpacking initramfs...
[ 0.464290] Freeing initrd memory: 3236K (ffff88005fc97000 - ffff88005ffc0000)
[ 0.464451] microcode: AMD CPU family 0xf not supported
[ 0.464560] Scanning for low memory corruption every 60 seconds
[ 0.465261] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.479534] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.481578] zbud: loaded
[ 0.481785] VFS: Disk quotas dquot_6.5.2
[ 0.481858] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482120] msgmni has been set to 2999
[ 0.482218] Key type big_key registered
[ 0.482413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.482461] io scheduler noop registered
[ 0.482463] io scheduler deadline registered (default)
[ 0.482512] io scheduler cfq registered
[ 0.482688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.482710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.482841] GHES: HEST is not enabled!
[ 0.482924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.503487] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.524026] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.524343] Linux agpgart interface v0.103
[ 0.524401] rtc_cmos 00:01: RTC can wake from S4
[ 0.524562] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.524601] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[ 0.524617] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.524839] TCP: cubic registered
[ 0.524845] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.524849] NET: Registered protocol family 17
[ 0.525165] registered taskstats version 1
[ 0.525574] Magic number: 6:546:636
[ 0.525730] rtc_cmos 00:01: setting system clock to 2014-11-06 14:37:08 UTC (1415284628)
[ 0.525790] PM: Hibernation image not present or could not be loaded.
[ 0.529043] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
[ 0.529053] Write protecting the kernel read-only data: 8192k
[ 0.534311] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.536542] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
[ 0.552237] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.560351] systemd-udevd[39]: starting version 216
[ 0.592052] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.592059] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.592875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596938] Floppy drive(s): fd0 is 1.44M
[ 0.614213] ACPI: bus type USB registered
[ 0.614265] usbcore: registered new interface driver usbfs
[ 0.614281] usbcore: registered new interface driver hub
[ 0.614967] FDC 0 is a post-1991 82077
[ 0.625659] SCSI subsystem initialized
[ 0.633113] libata version 3.00 loaded.
[ 0.633845] sata_nv 0000:00:0a.0: version 3.5
[ 0.634191] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
[ 0.634194] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 0.635580] usbcore: registered new device driver usb
[ 0.636718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.637213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.637384] ohci-pci: OHCI PCI platform driver
[ 0.637732] ehci-pci: EHCI PCI platform driver
[ 0.647435] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 0.647607] scsi0 : sata_nv
[ 0.652697] scsi1 : sata_nv
[ 0.652813] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
[ 0.652817] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
[ 0.653212] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.653223] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.653279] ohci-pci 0000:00:02.0: irq 22, io mem 0xfebfd000
[ 0.685200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.700074] firewire_ohci 0000:02:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.712351] hub 1-0:1.0: USB hub found
[ 0.712367] hub 1-0:1.0: 4 ports detected
[ 0.712766] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 0.712776] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.712845] ohci-pci 0000:00:02.1: irq 21, io mem 0xfebfe000
[ 0.772298] hub 2-0:1.0: USB hub found
[ 0.772346] hub 2-0:1.0: 4 ports detected
[ 0.773212] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 0.773228] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 0.773242] ehci-pci 0000:00:02.2: debug port 1
[ 0.773285] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 0.773315] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
[ 0.790050] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.790381] hub 3-0:1.0: USB hub found
[ 0.790395] hub 3-0:1.0: 8 ports detected
[ 0.880074] hub 1-0:1.0: USB hub found
[ 0.880086] hub 1-0:1.0: 4 ports detected
[ 0.970117] hub 2-0:1.0: USB hub found
[ 0.970134] hub 2-0:1.0: 4 ports detected
[ 0.970356] pata_amd 0000:00:08.0: version 0.4.1
[ 0.973849] scsi2 : pata_amd
[ 0.974094] scsi3 : pata_amd
[ 0.974162] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.974165] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.980098] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.110030] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.190443] ata3.00: ATA-6: IC35L120AVV207-0, V24OA63A, max UDMA/100
[ 1.190446] ata3.00: 241254720 sectors, multi 16: LBA48
[ 1.190651] ata3.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 1.190654] ata3.01: 625142448 sectors, multi 16: LBA48
[ 1.190664] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c7c000) ACPI=0x3f01f (20:15:0x1f)
[ 1.190668] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c7c000) ACPI=0x7f01f (20:15:0x1f)
[ 1.200168] firewire_core 0000:02:0b.0: created device fw0: GUID 00e0180000b91545, S400
[ 1.250375] ata3.00: configured for UDMA/100
[ 1.265023] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.265669] scsi4 : usb-storage 3-1:1.0
[ 1.265808] usbcore: registered new interface driver usb-storage
[ 1.290406] ata3.01: configured for UDMA/133
[ 1.310032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.310260] scsi 2:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[ 1.310565] scsi 2:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.380033] usb 3-2: new high-speed USB device number 3 using ehci-pci
[ 1.460029] tsc: Refined TSC clocksource calibration: 2210.758 MHz
[ 1.490267] ata4.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.21, max UDMA/33
[ 1.490278] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c7c000) ACPI=0x701f (60:600:0x13)
[ 1.510193] ata4.00: configured for UDMA/33
[ 1.517016] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.21 PQ: 0 ANSI: 5
[ 1.530745] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.530827] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.530831] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.530860] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.530988] sd 2:0:0:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
[ 1.531050] sd 2:0:0:0: [sda] Write Protect is off
[ 1.531053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.531145] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.536391] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.536403] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.536800] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.542997] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1.543072] sdb: sdb1
[ 1.543976] scsi5 : usb-storage 3-2:1.0
[ 1.567204] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.575313] sda: sda1 sda2
[ 1.575840] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.660061] usb 3-3: new high-speed USB device number 4 using ehci-pci
[ 1.810652] hub 3-3:1.0: USB hub found
[ 1.810704] hub 3-3:1.0: 4 ports detected
[ 2.210057] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 2.261495] scsi 4:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
[ 2.263859] sd 4:0:0:0: [sdc] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB)
[ 2.264963] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.264968] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 2.266088] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.266143] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.270838] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.270891] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.271726] sdc: sdc1 sdc2
[ 2.275974] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.276035] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.276094] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.446613] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.458243] usbcore: registered new interface driver usbhid
[ 2.458250] usbhid: USB HID core driver
[ 2.459628] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/0003:046D:C00C.0001/input/input1
[ 2.460237] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-2/input0
[ 2.465896] Switched to clocksource tsc
[ 2.514535] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.540869] scsi 5:0:0:0: Direct-Access Hama FlashPen 1.04 PQ: 0 ANSI: 0 CCS
[ 2.541837] sd 5:0:0:0: [sdd] 1003520 512-byte logical blocks: (513 MB/490 MiB)
[ 2.542457] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.542461] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.543083] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.543138] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546081] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.546131] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546968] sdd:
[ 2.549206] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.549255] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.549305] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 3.215911] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 3.216179] systemd[1]: Detected architecture 'x86-64'.
[ 3.233071] systemd[1]: Set hostname to <db1arch>.
[ 4.451586] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.452340] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.452470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.452530] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.453076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.453109] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.453152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.453167] systemd[1]: Starting Paths.
[ 4.453440] systemd[1]: Reached target Paths.
[ 4.453453] systemd[1]: Starting Encrypted Volumes.
[ 4.453723] systemd[1]: Reached target Encrypted Volumes.
[ 4.453743] systemd[1]: Expecting device dev-sda2.device...
[ 4.453935] systemd[1]: Expecting device dev-disk-by\x2duuid-1be23119\x2d5515\x2d4480\x2da559\x2d696105f9cee4.device...
[ 4.454136] systemd[1]: Expecting device dev-disk-by\x2duuid-385efd17\x2d3905\x2d4b8f\x2d8ec8\x2d9419a38cfcb0.device...
[ 4.454332] systemd[1]: Starting Root Slice.
[ 4.461699] systemd[1]: Created slice Root Slice.
[ 4.461738] systemd[1]: Starting User and Session Slice.
[ 4.462302] systemd[1]: Created slice User and Session Slice.
[ 4.462320] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.462665] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.462683] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.462993] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.463008] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.463307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.463322] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.463621] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.463637] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.463929] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.463954] systemd[1]: Starting udev Control Socket.
[ 4.464241] systemd[1]: Listening on udev Control Socket.
[ 4.464259] systemd[1]: Starting udev Kernel Socket.
[ 4.464547] systemd[1]: Listening on udev Kernel Socket.
[ 4.464579] systemd[1]: Starting Journal Socket.
[ 4.464874] systemd[1]: Listening on Journal Socket.
[ 4.464930] systemd[1]: Starting System Slice.
[ 4.465527] systemd[1]: Created slice System Slice.
[ 4.465560] systemd[1]: Started File System Check on Root Device.
[ 4.465574] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.466125] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.475871] systemd[1]: Mounting Temporary Directory...
[ 4.486514] systemd[1]: Starting system-getty.slice.
[ 4.487508] systemd[1]: Created slice system-getty.slice.
[ 4.487590] systemd[1]: Mounting Huge Pages File System...
[ 4.488820] systemd[1]: Starting udev Coldplug all Devices...
[ 4.491503] systemd[1]: Starting Setup Virtual Console...
[ 4.494613] systemd[1]: Mounting Debug File System...
[ 4.497220] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.557484] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.640820] systemd[1]: Started Load Kernel Modules.
[ 4.640879] systemd[1]: Starting Apply Kernel Variables...
[ 4.642456] systemd[1]: Mounting Configuration File System...
[ 4.643981] systemd[1]: Mounted FUSE Control File System.
[ 4.864249] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.865740] systemd[1]: Starting Journal Service...
[ 4.867779] systemd[1]: Started Journal Service.
[ 5.312956] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 5.624022] systemd-udevd[140]: starting version 216
[ 6.289020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.289034] ACPI: Power Button [PWRB]
[ 6.289120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.289123] ACPI: Power Button [PWRF]
[ 6.352568] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 6.352584] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 6.352594] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 6.368450] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 6.486856] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.486927] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.587129] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 904kHz
[ 6.688852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 6.689198] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[ 6.728214] random: nonblocking pool is initialized
[ 6.988022] mousedev: PS/2 mouse device common for all mice
[ 7.210562] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:d8:00:96:f1
[ 7.210572] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[ 7.210685] ACPI Warning: SystemIO range 0x0000000000005000-0x000000000000503f conflicts with OpRegion 0x0000000000005000-0x0000000000005004 (\_SB_.PCI0.SMBS.SMRG) (20131218/utaddress-258)
[ 7.210694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.210750] i2c i2c-0: nForce2 SMBus adapter at 0x5040
[ 7.210837] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.304777] MCE: In-kernel MCE decoding enabled.
[ 7.310354] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 7.310416] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 7.388088] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 7.482978] ppdev: user-space parallel port driver
[ 7.492121] EDAC MC: Ver: 3.0.0
[ 7.682441] AMD64 EDAC driver v3.4.0
[ 7.720053] intel8x0_measure_ac97_clock: measured 50279 usecs (2472 samples)
[ 7.720064] intel8x0: clocking to 46862
[ 7.720952] EDAC amd64: DRAM ECC enabled.
[ 7.720961] EDAC amd64: K8 revE or earlier detected (node 0).
[ 7.721024] EDAC amd64: CS0: Double data rate SDRAM
[ 7.721026] EDAC amd64: CS1: Double data rate SDRAM
[ 7.721028] EDAC amd64: CS2: Double data rate SDRAM
[ 7.721029] EDAC amd64: CS3: Double data rate SDRAM
[ 7.721031] EDAC amd64: CS4: Double data rate SDRAM
[ 7.721032] EDAC amd64: CS5: Double data rate SDRAM
[ 7.721371] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 7.721411] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 7.819219] systemd-udevd[148]: renamed network interface eth0 to enp0s5
[ 8.800850] nvidia: module license 'NVIDIA' taints kernel.
[ 8.800863] Disabling lock debugging due to kernel taint
[ 8.878778] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[ 8.878854] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.879632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.123 Wed Jul 2 10:59:22 PDT 2014
[ 9.251351] Adding 2137224k swap on /dev/sda2. Priority:-1 extents:1 across:2137224k FS
[ 9.501409] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.518296] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.788573] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.527802] systemd-journald[119]: Received request to flush runtime journal from PID 1
glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7600 GT/AGP/SSE2
OpenGL version string: 2.1.2 NVIDIA 304.123
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 304.123 304.123
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00
OpenGL ES profile extensions:
lspci -v
00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [c0] AGP version 3.0
Kernel driver in use: agpgart-amd64
Kernel modules: amd64_agp
00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: 66MHz, fast devsel
I/O ports at 5080 [size=32]
I/O ports at 5000 [size=64]
I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c_nforce2
00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ec00 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at e800 [size=256]
I/O ports at e400 [size=128]
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd
Kernel modules: pata_amd, pata_acpi, ata_generic
00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at c800 [size=16]
I/O ports at c400 [size=128]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv
Kernel modules: sata_nv, pata_acpi, ata_generic
00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: ba800000-da7fffff
Kernel modules: shpchp
00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0401
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
running browsers from a uterm shows only these console messages (nothing else):
firefox http://dennisbusch.de/software/refugeel … _rlGL.html
(process:489): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
google-chrome-stable http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
google-chrome-stable --ignore-gpu-blacklist http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
chromium shows the same messages as google-chrome-stable does.
stat /dev/nvidia0
File: /dev/nvidia0
Size: 0 Blocks: 0 IO Block: 4096 character special file
Device: 5h/5d Inode: 10741 Links: 1 Device type: c3,0
Access: (0666/crw-rw-rw-) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2014-11-06 15:42:55.105702689 +0100
Modify: 2014-11-06 15:42:55.105702689 +0100
Change: 2014-11-06 15:42:55.105702689 +0100
Birth: -
That's all I know. Any ideas?Still trying...but pretty much stumbling around in the dark here.
cat /proc/driver/nvidia/agp/host-bridge
Host Bridge: PCI device 10de:00e1
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f00421b:0x00000312
cat /proc/driver/nvidia/agp/gpu
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0xff000e1b:0x1f004312
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Disabled
SBA: Enabled
Digging around the web I found how to enable fastwrites and did so by
creating a file /etc/modprobe.d/nvidia.conf
with this content:
options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1
after reboot, startx
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Enabled
SBA: Enabled
The problem of sluggish webgl performance persists though and the
browsers as described in the OP are still giving the same messages.
Here is some more data, maybe it's relevant...
cat /proc/driver/nvidia/params
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 1
EnableAGPFW: 1
Mobile: 4294967295
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 0
DeviceFileMode: 438
RemapLimit: 0
UpdateMemoryTypes: 4294967295
InitializeSystemMemoryAllocations: 1
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RegisterForACPIEvents: 1
RegistryDwords: ""
RmMsg: "" -
ITunes sync poor performance [iPhone 4 iOS 4.1] [Windows Vista x64]
I am using an iPhone 4, iOS 4.1 and am running iTunes on a Windows driven laptop, x64 Vista. I have been an iPhone user for 2 years now, and recently I have gotten some trouble that I can not seem to fix by myself, nor Google.
The thing is, iTunes is really slow while syncing. Most of the time Firefox is unusable while syncing. iTunes.exe does not take up a lot of CPU usage, AppleMobileDeviceService.exe however often does take 50% of CPU usage (running dual core, so it might be 100% on one of these cores).
iTunes has worked properly on my device, heck, sometimes it still does, sometimes even during sync it works properly fast, only to come to this slowness somewhere during syncing.
The worst I have seen iTunes perform is during "Synchronizing apps with iPhone (step 4 out of 6)". Here, iTunes passes all my installed apps (200+), and takes at least one minute per app. I have recently only once seen iTunes doing this properly, than it covered 5 apps per second, the way it should be I may assume. Also, when cancelling or interupting this sync, and than reattaching the iPhone, I get an error ending with 0000065. The only way to clear this seems to be rebooting iPhone.
I am afraid of reinstalling iTunes alltogether, because I do not know what will happen with my iPhone backups (syncing multiple iPhones with this computer; 3), apps and music playlists.
Quite some text, but I really hope it's enough troubleshooting so we can fix some of this. iTunes is just unworkable right now, and seeing as I have a few problems with the iPhone as well, it has to start working on me!
As for the iPhone problem: the camera shutter won't open up! Can get the small front camera to work, however not in Apple's camera app itself .
Please, what can I do to speed things up? Many thanks in advance!
Edit: I'm running iTunes 10.1.1.4
Also, this might be worth mentioning: I removed some backups/restore-points (using Dutch version of iTunes, not sure what US/UK calls them, "reservekopieen") of the iPhones I sync with iTunes, ones I ought useless. I can not imagine this made iTunes slower, but I can not rule out either that this problem has occured since I deleted these backups from iTunes and HDD.
Message was edited by: GoogolplexNL
Message was edited by: GoogolplexNLNo data is stored with the iTunes app. iTunes accesses data that is stored elsewhere. Deleting iTunes won't touch or affect any data accessed by iTunes no different from deleting Word not touching or affecting any Word documents saved on your computer.
Even if your iPhone's backup was deleted with iTunes which it won't be since it is stored completely separate, you can manually create a new backup for your iPhone without syncing your iPhone with iTunes, and your iTunes library on your computer which is also stored completely separate should be included with your computer's backup along with all other important data stored completely separate from the apps that access the saved data. -
Premiere Pro 7.2.2 - 10.8.5 - Sluggish Performance (with a Bluetooth twist!!)
Hello all -
I've BOLDED all of the relevant info for the ADD poster children like myself.
I'm having performance issues with PP 7.2.2 running on a Mac Pro 2010 2 x 2.4 GHz (full specs below). The issue makes PP pretty much unusable, and I'm 100% certain it's a CC thing, because CS6 isn't showing any of the same symptoms. Whenever I switch from one window to another (sequence to source monitor, source to program, load a clip into the source, etc) I cannot scrub through the footage or sequence. It takes PP 5+ seconds to "catch up", and then it scrubs just fine in whichever window I've just switched to; UNUSABLE.
Now here's the catch (and trust me, it's a weird one!). If I am using PP and connect my Mac Pro to ANY Bluetooth Speaker, it works just fine! No sluggishness, runs like a charm and becomes the PP I've come to know and love (and I come from the Avid world, so that's saying a lot). However, this presents a major issue: bluetooth introduces 1/2 second or more of delay in the audio, which makes cutting to music very frustrating, to say the least.
Now I don't know how far down the rabbit hole I want to go with this issue, but I'm guessing it has something to do with Core Audio and/or PP just doesn't like the Mac Pro's audio hardware (maybe a driver issue?). Again, if I use anything BUT a bluetooth sound device, the issue reappears. It's a real chin-scratcher.
My specs:
Mac Pro 2010
2 x 2.4GHz Xeon
24GB RAM
10.8.5
PCIe SSD system drive **
EVGA GTX 760 2GB **
PP CC 7.2.2
** I know the graphics card is not officially supported. To be clear, and rule out the SSD and the GPU, these issues were present and more prevalent before these two recent upgrades.
Cheers, and thanks for your help
Henry GretzingerHello all -
I've BOLDED all of the relevant info for the ADD poster children like myself.
I'm having performance issues with PP 7.2.2 running on a Mac Pro 2010 2 x 2.4 GHz (full specs below). The issue makes PP pretty much unusable, and I'm 100% certain it's a CC thing, because CS6 isn't showing any of the same symptoms. Whenever I switch from one window to another (sequence to source monitor, source to program, load a clip into the source, etc) I cannot scrub through the footage or sequence. It takes PP 5+ seconds to "catch up", and then it scrubs just fine in whichever window I've just switched to; UNUSABLE.
Now here's the catch (and trust me, it's a weird one!). If I am using PP and connect my Mac Pro to ANY Bluetooth Speaker, it works just fine! No sluggishness, runs like a charm and becomes the PP I've come to know and love (and I come from the Avid world, so that's saying a lot). However, this presents a major issue: bluetooth introduces 1/2 second or more of delay in the audio, which makes cutting to music very frustrating, to say the least.
Now I don't know how far down the rabbit hole I want to go with this issue, but I'm guessing it has something to do with Core Audio and/or PP just doesn't like the Mac Pro's audio hardware (maybe a driver issue?). Again, if I use anything BUT a bluetooth sound device, the issue reappears. It's a real chin-scratcher.
My specs:
Mac Pro 2010
2 x 2.4GHz Xeon
24GB RAM
10.8.5
PCIe SSD system drive **
EVGA GTX 760 2GB **
PP CC 7.2.2
** I know the graphics card is not officially supported. To be clear, and rule out the SSD and the GPU, these issues were present and more prevalent before these two recent upgrades.
Cheers, and thanks for your help
Henry Gretzinger -
Sluggish performance and slow visio image loading in Acrobat Reader
I have created a pdf file with the Adobe PDF-"printer" from an original Word document. The Word document contains image components from Visio, which have been copy-pasted into the Word document (for instance a UML diagram). While the performance in Word is OK, the performance in Adobe Reader (AR) is not. The image components render real slow in AR, sometimes taking a minute to render an A4 of image components.
Question: Is there some way to make the Adobe PDF-"printer" convert the copy-pasted image components into real images (i.e. not vector graphics)? Or is there some other performance improvement I could do?
I would also be happy to know how it can run so smooth in Word but so sluggish in pdf-format :)Thanks Dave! I was in the middle of writing this when your post came in:
Not sure if this will help anyone, but I changed the button fill color to white and it seemed to fix the flicker. I exported each state from indesign as a PDF and recreated the button from scratch. This still had the flicker. I'm guessing something strange is happening with the transparancy of the states.
Glad to hear it's fixed! -
Sluggish performance (and Adobe applications slow)
Not sure what the problem is here, well, outside of my Mac running rather sluggishly lately. Even Adobe applications take AT LEAST a minute or more to open up. I seem to be getting the spinning beach ball more often than not jumping between applications at times as well. And watch out if I leave the computer on 7 or more days straight... ouch, the performance drags.
I've zapped the PRAM, repaired and verified permissions and the drive, my hard drive is only at 30% capacity, so I'm a little stumped about the performance issue.How many applications are you running at the same time? Perhaps you need more RAM.
-
Slow rendering and sluggish performance...
just built a new machine for cs3 prod studio. quad core 6850, 4 gig ram, xp sp2, 150 raptor boot, 2 500 wd re2 in raid 0 for data...get the picture, all good stuff. however I'm noticing very long rendering times as well as a slight sluggishness overall in pp cs3. I'm using the onboard raid from my asus p5k as well as the onboard sound. Is that the culprit? One of my other pc's is a qx6800 with same specs however I'm using an areca sata raid card for my data and creative sb x-fi elite for sound. btw I use cineform prospect hd for my editing. now I have a 15min video with very minimal editing, just a few dissolves basically, and it is taking 3 hours to render out the hd avi which takes 10 minutes on the other pc. Also when editing the pc seemed to lag when I performed edits. and when I'd play a clip it would start then the sound cuts out for 5 secs or so then comes back on. So what should I look for 1st? I'm thinking its the onboard raid sucking, but on a brand new install I'm sure there are some tweaks I'm missing. TIA
I started a post titled 'playback lag'. I have exactly the same symptoms you do. Did you find a fix?
My system is running Vista, I was thinking of going back to XP just to solve this issue but I see your running XP.
Is your integrated sound a SoundMAX device?
For some reason I can't find my original post - it looks like it's been deleted?
My original post used to be at
http://forum.adobe.com/webx?13@@.3bc793cc/8
I called Adobe support but they have no idea. I'm not even sure they know what Premiere is.
Maybe you are looking for
-
Problem constructing a web service request wich does not include namespace
Hi! I'm evaluating Flex 3 for a web development. I'm having problems with a web service invocation. This is the soap request made with Soap UI: <soapenv:Envelope xmlns:soapenv=" http://schemas.xmlsoap.org/soap/envelope/" xmlns:open=" http://www.openu
-
Acrobat 8.1.2 Pdf Files disappear
hi there, i am running OS 10.5.2, Adobe acrobat pro 8.1.2 . when i print a file from vectorworks (12.5.3) about 40% of all files go to the printer dialogue, where it says printing, processing and so on and then disappear completely. if i am lucky the
-
Payment program F110 - how to add second print program in customizing
Hello all, i would like to add second (another print program after standard sapscript print program customized in table T042Z) print program in transaction F110. This second smartform print program should be customizable and triggered automatically
-
Hi All, Basically I'm a BI resource and exploring some if the BO functionality to be implemented nest project. My Question is, like we can schedule broadcasting of work book or report in BI through e-mail in BI-Bex. Is there any such functionality in
-
I tried few times purchase item but credit card problem, how do I reset the thing due to it asked me to contact iTunes support