SM 56 error while posting IDOC thru XI (File to IDOC) ????

Hi ,
When I am trying to post data into R/3 system thru MATMAS idoc,I have problem in posting data in R/3 system. In XI side the message is sent correctly to R/3 system, but in R/3 it is giving me SM 56 error, while mapping I tried to map only few fields, other mandatory fields I had populated with some constants and values and rest unwanted segments I disabled them. When I saw in error log it says PARTNER PROFILE is not properly set (but I checked Partner Profile is correct), when I checked the record it shows all fields (mapped with constants and values) except the mapped fields.
Can anyone help me in this as I am struggling like anything...
Thanks in advance
Andy

hi Andy,
if you have a problem with control record have a look
at my weblog:
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Similar Messages

Error While Posting Data Of Multiple File to R/3

Hello,
I am currently testing with a scenario where a number of XML files are read by XI and their data is passed to R/3 via an RFC call. Each XML File contains one line item data. I am using BPM to achieve this. The problem is: If I test with a single line item data (single file), the scenario works fine and data is updated at the R/3 end. But if I try to put multiple files simultaneously, only one file's data is going into R/3. What can be the problem? Is it something to do with serialization? I have tried using EOIO; but still the same problem persists. I see in SXMB_MONI that all the messages have chequered flag. I have tried debugging the RFC, but it does not work out for multiple calls. Anybody has any idea how this can be solved?
Regards,
Amitabha

Hello Bhavesh,
Thanks for your reply. My BPM scenario is as follows:
Receive->Synchronous Send->Asynchronous Send
In sender channel for XML files, I have used Filename* as the source file name as my files are coming with <filename ><timestamp> naming convention. Poll interval is 5 seconds, Processing mode is by name.
AT the RFC receiver channel end, the credentials are all ok and the number of maximum connections is set to 25. I have always tested with no. of messages<5.
Hope you find this info useful. Awaiting reply.
Thanks and Warm Regards,
Amitabha

Error while posting IDoc

Hi,
i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

First ,
check the partner profiles in R3,
i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
defining a logical system is in SALE.
then ditribute u r the model in BD 64
once every thing is OK in R3
on PI.
create a RFC destination of type R3 which points to R3 , try remote log-on .
this will be used in receiver chaneel
and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
and one of the following should be in place.
check 'apply control record from payload' if ur explictly passing Control record from mapping
otherwise,
check sender service and receiver service in Receiver agreement and select appropriate systems.
Regds,
Suresh

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting parked doc

Hi friends
I am getting the following error while posting a parked doc-
Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303
It is actually asking for the Section Code which does not appear in the screen. I am wondering where I can set the Section Code as mandatory or optional. I have checked the FSV but to no avail.
Help me plzz........

Hi......Thxs a lot for ur reply.......But none of the OSS Notes suit my requirement. However, I have observed that when I park the doc thru FBV1 and later try to post the same, it is getting posted without any errors.
Any idea how this is working?
Cheers
Hrishi

Problem while posting goods thru MB1C

Dear Friends,
Iam practising in IDES. While posting goods thru t.code MB1C, iam encountering 2 error messages.
1. Posting only possible in 4/2008 & 5/2008 periods only.
2. Posting period 005/2008 is not open.
I believe there are few MM settings to be done for this,.Kindly help in this reg.
Points assured
KrIshna C

Hi,
Use the T code: MMPV
give your company code and year
select open and close periods
execute
it will close for that month
keep repeating those steps until you reach your current period
this should solve your problem
Award points if you find this info useful
Regards
saprules.

Unexpected error while navigating quickly thru menu items

Hi All,
I am getting error while navigating quickly thru my portal application. It's a WebCenter spaces custom application that's using UCM for few contents.
JDEV : 11.1.1.5.0
Below is the error log that I see on EM.
[2013-03-07T13:24:08.091+01:00] [WC_Spaces1] [WARNING] [] [oracle.adf.view.rich.component.fragment.UIXRegion] [host: cgreaswbc1prd.canonhosted.net] [nwaddr: 172.31.92.69] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: [email protected]] [ecid: 004ppJ8QM7m0joxMwAJb6G00064Y004Z2G,0:1] [APP: CanonSelfServicePortal_application1#V2.0] [URI: /CSSP/faces/ActivitiesTF] [TARGET: /Farm_prd_domain/prd_domain/WC_Spaces1/CanonSelfServicePortal_application1(V2.0)] [TARGET_TYPE: j2ee_application] [[
java.lang.IllegalStateException: The expression "#{bindings.ServiceRequestOverviewTF1.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "r1") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.ServiceRequestOverviewTF1}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "com_canon_cssp_portal_pageDefs_UserDetailsPageDef_WEB_INF_UserDetailsTF_xml_UserDetailsTF". Now using an empty RegionModel instead.
     at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
     at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:715)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.access$000(LifecycleImpl.java:72)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$1.call(LifecycleImpl.java:720)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$1.call(LifecycleImpl.java:716)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:503)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:715)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executeBindings(LifecycleImpl.java:750)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:655)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:301)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.canon.cssp.portal.filter.UnexpectedErrorFilter.doFilter(UnexpectedErrorFilter.java:47)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
This log is followed by a "ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RESTORE_VIEW 1" log. Can anyone help me know what can be the reason of this issue?
Kindly let me know if you need more information.
Regards,
Kanchan

Hi Daniel,
Thanks for your reply!
The navigation menu that I am talking about here, is implemented using Oracle ADF navigation model. All the links in the menu refer to different bounded taskflows. Now if we click on those links one after the other, while one taskflow is still in progress another taskflow is invoked.
If you look at the exception that I posted, the expression below is pointing to ServiceRequestOverviewTF1, while the pagedef is referring to UserDetailsTF. Now, in my application, there is no link between ServiceRequestOverview and UserDetails. Could it be a case that a kind of mix up of active taskflow and previously called taskflow is happening?
java.lang.IllegalStateException: The expression "#{bindings.ServiceRequestOverviewTF1.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "r1") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.ServiceRequestOverviewTF1}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "com_canon_cssp_portal_pageDefs_UserDetailsPageDef_WEB_INF_UserDetailsTF_xml_UserDetailsTF". Now using an empty RegionModel instead.

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting parked documents

HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error while posting asset aquisition

Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanuja

Hi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting FB60 -

Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
Kishore

Hi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR

SM 56 error while posting IDOC thru XI (File to IDOC) ????

Similar Messages

Maybe you are looking for