SM Diagnostics Warning " No landscape element has been found "

Hi All,
I am in the process of setting up the SM Diagnostics on Sol Man 4.0 SP10. I have deployed the LMSERVICE11_0-20001429.SCA file when I login as J2EE_Admin to SM Diagnostics I see the following warning
Warning : No landscape element has been found. There might be none or you are not authorized to see any of them.
I am not sure if I can go ahead with SMD wizard before I clear this warning.
Thanks
Sunil

Hello Paula,
I've tried SMDIAG_WIZARD but it also ended with error :
The data could not be passed to the Solution Manager Diagnostics.
Solution Manager Diagnostics error message: <--Localization failed: ResourceBundle='com.sap.engine.services.rfcengine.RFCRes
Procedure
Check the RFC connection and the Solution Manager Diagnostics configuration

I've checked the RFC connection n found no error. I've also checked SMD config, it looked fine. But, I'm still wondering there is no RFC setting in SMSY for non-ABAP system. any idea ?
Thx n Regards,
Adhi
Message was edited by:
Adhi Wibowo

Similar Messages

Ever since my iphoto library crashed (ran out of space without warning) my mcbook pro has been slow, unresponsive, freezes in sleep mode and won't restart... please help.

Hi everyone
Ever since my iphoto library crashed (ran out of space without warning) my mcbook pro has been slow, unresponsive, freezes in sleep mode and won't restart...
I've since backed everything up on an external hard drive, removed the corrupt library, even reinstalled the operating software and there is now hardly anything on the hard drive, it still runs painfully slow. If I close the lid which puts it in sleep mode, it either doesn't go into sleep mode but instead the battery just gets drained and I find it completely empty of power (it won't start again unless plugged in), or it goes into sleep mode but just freezes when I try to reopen.
In iphoto (reinstalled) but even other applications it is painfully slow, not like a mac at all!
I am trying to go to genius bar with it but thinking maybe someone in this forum can help...
Many thanks
Andre

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Every time I open Iphoto I get the following message: "A photo has been found in the iPhoto library that was not imported. Do you want to import it? Yes or No" Any suggestions?

Every time I open Iphoto I get the following message: "A photo has been found in the Iphoto library that was not imported. Does anyone have any suggestions?

Quit iPhoto and to to the iPhoto library (by default in your pictures folder) - right click (control click) on it and select show package contents - find the folder named import (on importing) and drag it to the desktop - DO NOT MAKE ANY OTHER CHANGES - launch iPhoto and you will be fine.
Open the import(ing) folder and if there is nothing in it that you need move it to the trash and empty the trash
LN

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Everytime I open iphoto, my computer tells me A photo has been found in the iPhoto Library that was not imported. Would you like to import it. no matter what I do, iphoto puts the pic in recovered files. How do I fix this?

Everytime I open iphoto, my computer tells me, A photo has been found in the iPhoto Library that was not imported. Would you like to import it. If I import it, a message comes up Unreadable file, the following file could not be imported. them it tells me where the file is and it cannot be opened. If I do not import, then it says,The photo has been placed in the folder /Users/patrick*******/Pictures/iPhoto Library Recovered Photos_4. It will just keep adding to recvovered photos. This drives me crazy!!!!!!! How do I fix this?

I had this problem some months ago and the following solution from Terrence Delvin put things right:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
However, since connecting a memory stick to my computer, I now have the same problem again. This time there is no folder called 'Import' or 'Importing' so what should I do?

IPhoto, "A photo has been found in the iPhoto Library that was not imported

A photo has been found in the iPhoto Library that was not imported. I click no or yes and I receive a message... The photo has been placed in the folder /Users//Pictures/iPhoto Library Recovered Photos_11. what do i need to do to stop this???

Welcome to the Apple Discussions.
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
Regards
TD

A photo has been found in the iphoto library that has not been imported???

When i open iphoto i get a message saying "a photo has been found in the iphoto library that has not been imported, would you like to import it?" I have tried what everyone is saying to do, but when i look under show package contents there is no import folder to move. only a folder that says contents and i've looked all through that, still no import folder. Even though i click no i do not want the photo imported it still is stored on my external hard drive and every so often i have to go delete TONS of photos and when you click on the photo it doesn't even actually show up as anything.

but when i look under show package contents there is no import folder to move. only a folder that says contents
You're looking at the iPhoto.app package. Those instructions are for the iPhoto Library package. That's in your Pictures Folder.

A duplicate attribute key has been found when processing

Hi
When I process one of my dimensions it fails and I get the following error:
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'Customers', Column: 'DisplayName', Value: 'Stephen Grant'. The attribute is 'Display Name'.
I don't know if this is significant, but the attribute to which it is making reference was added through BIDS 2008 (the cube was originally created with BIDS 2005).
There are no duplicates of 'Stephen Grant' in the DisplayName column. Not that it should matter if there were as this attribute has a cardinality of Many, with an rigid attribute relationship directly to the dimension's key attribute. The Key column for the Display Name attribute simply refers back to the same (DisplayName) column in the table.
If I delete this record, or even just update the DisplayName field from 'Stephen Grant' to something else, the dimension processes just fine. I can't work out what it is about this record that is stopping the dimension from being able to process.
Can anyone help me figure out what's going on?
Julia.
P.S. I am using SSAS 2008 on Windows Server 2008

Hello there,
Does anybody has the complete resolution for duplicate entries data. I am showing the data below .
RegionName
BranchName
LoanOfficerFullName
PRIME - TEAM NORTHEASTERN
CALIFORNIA
ALONA HAYES
PRIME - TEAM WESTERN
RENO-DAMONTE RANCH
VINCENT LOTITO
PRIME - TEAM WARTON
NEWARK (Chicago)
CHRISTOPHER CLIFTON
PRIME - TEAM WARTON
GRAND HAVEN (West Michigan)
SEAN FOLEY
PRIME - TEAM SALMANS
LAWTON (Amarillo)
THOMAS STEARNS
PRIME - TEAM BARTON
CALIFORNIA
ALONA HAYES
PRIME - TEAM ROBINSON
LAS VEGAS
ANGELA DEATON
PRIME - TEAM ROBINSON
LAS VEGAS
HERMAN VANDER VELDT
PRIME - TEAM ROBINSON
LAS VEGAS
DAWN ROBINSON
PRIME - TEAM ROBINSON
LAS VEGAS
MICHAEL BIRK
Here i have the Hierachies in order LoanOfficerFullName-->BranchName-->RegionName. Loan Officer is the lowest level. I had created another column and make that unique entries so that I could make the unique column as the Key and the hierachies i have linked with the key column value. The issue
is that i am getting the expected result in OLAP from data side. But the data is not getting aggregated like Team Barton is coming twice though for the Dimension I make IsAggregatable property to True. If anybody can help me I will aprecciate. If any other clarification need I can provide.

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

Errors in the OLAP storage engine: A duplicate attribute key has been found when processing

Hi dear MSDN Community,
I am facing a problem while processing a cube with a customer hierarchy as follows:
Global Account --> Main Customer --> Master Customer --> Customer
The data comes from a flatted parent child table, that is, I create an extra column for every level of the hierarchy in the customer view. If a level is empty, then the value is filled with the previous value. Then I can use the property:
HideMemberIf = OnlyChildWithParentName for the intermediate levels (Main and Master Customer)
HideMemberIf = ParentName For the leafs (Customer)
HideMemberIf = never for the root (Global Account)
Consider this example:
Then, for the root level I am using as the key the fields in yellow in order to avoid duplicates. However, I am getting the error message "Errors in the OLAP storage engine: A duplicate attribute key has been found when processing" while processing.
I analyzed the query that SSAS issues to the server (select distinct ....) and I think it should work but it is still failing.
I had similar problems with the intermediate levels but I was able to solve it using a similar procedure.
Any help will be appreciated.
Kind Regards.

When are you having this error? While processing the dimension or during cube processing?
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to connected my Creative WP-350 Headset to my iMac. The device has been found it will not connect?

How to connected my Creative WP-350 Headset to my iMac. The device has been found it will not connect?

You're profile indicates your Mac has v10.5.1 installed.
If that is correct, you need to update to v10.5.8.
Click Software Update from your Apple  menu drop down menu or open System Preferences > Software Update.
After the update is installed, restart your Mac.
Turn off the printer then turn it back on then try printing via USB.
If that didn't help, try here > Mac OS X 10.5: Included printer drivers

No Service Class Has been Found

Dear All,
We are getting some strange error in SNC XML messages,
Transaction - sxmb_moni
Error Message -
"No Service Class Has been Found".
Can any body plz help me on this...what could be the reason?
Regards,
Rajesh Patil

Hi Rajesh
Could you check whether xml is mapped to the correct application class
Table /SCMB/BOLAPPCL To check the supported combinations of XML-interface and process type
Also check whether inbound message xml is set properly in spro--sncbasic settings-----processing of inbound xml messages.
Best Regards
Vinod

Windows backup reports when restore is attempted that no drive has been found.

The backup is duly found, but restore (of Windows 7) cannot proceed, since the setup of the repair disc reports that no (target drive) is found.
Is there a solution for this?
KR
Joe

Hi 549toast,
Would you please explain the issue more detailed ?
Are you performing a system restore from a repair disk and you will get a "no drive has been found "notification ?Or perfoming a system recovery from an image created before?
Have you got any error code ?Have you tried other restore points or other backup image(This will help us to verify whether it is caused by the machine or the image or the restore point) ?Can we get into the machine now ?
If we can get into the machine ,please try the following steps to have a troubleshoot :
1.Run "sfc /scannow"to check the health of the system files.
2.Update or reinstall the disk drivers from the device manager.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't open desktop - I get a window that says no application has been found to open the document desktop.

Can't open desktop - I get a window that says no application has been found to open the document desktop.
Any ideas?
Thanks

It may be that a "metadata attribute" called the "bundle bit" has somehow been set on the Desktop folder, such that the system treats it as a "package" rather than as a folder.
To check for this, click on the Desktop, type command-I (Get Info), and look in the General section of the Info window under "Kind". It should say "Kind: Folder" - if it instead says "Kind:package," then I would proceed as follows:
Download and run the utility File Matey. From its "Choose an Object" window, navigate to the Desktop folder and click Choose. In the next window, see if the box for "Has Bundle bit" is checked:
If so, then uncheck it, and click Apply, then Save.

[SOLVED] Xfce 4.8, "no running instance of xfce4-panel has been found"

Hello fellow Archers!
I just upgraded my Xfce installation to version 4.8, but I have a weird problem with xfce4-panel. After upgrading the system via pacman I've rebooted, and after logging in I couldn't see the Xfce's panel anymore! Moreover, a dialog box pops up saying that "no running instance of xfce4-panel has been found". I've tried to fix this issue by launching xfce4-panel through a terminal, and then saving the session before logging out. Now when I log in, I can finally see the panel, but the pop up window keeps coming out every single time. Do you have any suggestions on what could be the issue?
Thanks in advance!
Last edited by Tudhalyas (2011-01-18 12:15:03)

Behemot you'd better start a different thread. May be a different issue as this one is solved.
isn't it supposed to start from /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml ? Here's what's in mine:
<?xml version="1.0" encoding="UTF-8"?>
<channel name="xfce4-session" version="1.0">
<property name="general" type="empty">
<property name="FailsafeSessionName" type="string" value="Failsafe"/>
</property>
<property name="sessions" type="empty">
<property name="Failsafe" type="empty">
<property name="IsFailsafe" type="bool" value="true"/>
<property name="Count" type="int" value="5"/>
<property name="Client0_Command" type="array">
<value type="string" value="xfwm4"/>
</property>
<property name="Client0_PerScreen" type="bool" value="false"/>
<property name="Client1_Command" type="array">
<value type="string" value="xfce4-panel"/>
</property>
<property name="Client1_PerScreen" type="bool" value="false"/>
<property name="Client2_Command" type="array">
<value type="string" value="Thunar"/>
<value type="string" value="--daemon"/>
</property>
<property name="Client2_PerScreen" type="bool" value="false"/>
<property name="Client3_Command" type="array">
<value type="string" value="xfdesktop"/>
</property>
<property name="Client3_PerScreen" type="bool" value="false"/>
<property name="Client4_Command" type="array">
<value type="string" value="xfce4-settings-helper"/>
</property>
<property name="Client4_PerScreen" type="bool" value="false"/>
</property>
</property>
<property name="splash" type="empty">
<property name="Engine" type="string" value=""/>
</property>
</channel>
Last edited by rwd (2011-04-23 07:32:04)

SM Diagnostics Warning " No landscape element has been found "

Similar Messages

Maybe you are looking for