SM Special Character Displays as Bullet

Hello,
I'm using a form in Acrobat Standard 7.0 - OSX.
When using the special character SM (Service Mark in superscript) it displays as a bullet. The TM which is also a superscript works fine.
Can you think of any reason why?
Thanks

For the record there was a Acrobat Standard for Mac.
When acrobat 6 came out, there was a standard and pro. But the standard version did nothing more than Mac's own PDF creation capability. Ther were such howls of Protest that when Acrobat 7 came out, there was no longer a standard version. Please check you acrobat history. Standard for Mac could even create forms. then only thing it could do was create pdf's
and also the was a standard and pro version of 5 also. The proversion had the print press capabilities built in. the standard version had the ability to create forms. And I think 5.05a was the best version ever put out. You could even create PDF E-Books.

Similar Messages

Special character display issue

Hi,
I've been struggling with this issue for some time now and
have not yet found a solution. Basically I am trying to display the
letter 'á' in bold within a dynamic text field, where the text
is parsed from some internal script.
There is nothing wrong with the script as it works for other
special characters. I have embedded the correct glyphs, and even
tried all glyphs.
I have tried several methods of encoding the character in the
scipt such as Unicode Escape, Numeric Entity and URL encoding; no
luck with either. For other special characters I have simply
embedded the glyph and typed the special character into my script
using the charmap instructions and they have worked fine but for
some reason when I want to make it bold it just wont display. The
method I've used to embolden the text is show below, please note
this has worked fine for other characters and the bold version of
the font contains the glyph in the charmap.
"<font face=\"AvantGarde LT
Bold\">Lávese</font>"
This results in: Lvese (in bold) skipping the á
I'm starting to wonder if this is a problem with the software
itself. If anyone has any suggestions, I'd love to give them a go.
Thanks in advance for any assistance
P.S. my e-mail is [email protected]

Pl identify which exact version of 10g, along with the database characterset.
Going by what you have stated, your database characterset is most likely WE8ISO8859P1, which does not recognize the single quote (or apostrophe) or the bullet point.
You will need to use a characterset that supports these characters - Oracle recommends AL32UTF8
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch6unicode.htm
If you can recreate this database, use AL32UTF8 then perform your conversion.
HTH
Srini

Special character displaying as ? in PDF output

Hi,
I am generating BI publisher report through Oracle application.
My Pdf output is ok for Finnish and German language. But for polish font I am getting ? in PDF output. When I open XML file it says
" The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource"
In database Polish font is stored perfectly.
I tried this <?xml version="1.0" encoding="UTF-8" ?> for generating XML. But I did not work.
I do not know what is the problem. Please help me.
Regards,
Faiyaz

create or edit xdo.cfg file.
For XML Publisher Desktop it is ( in my case) c:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config\.
Find section fonts, add your font, that support polish. like that
<font family="Times New Roman" style="normal" weight="normal">
<truetype path="C:\WINDOWS\Fonts\times.ttf" />
</font>
For XML publisher is Note:399518.1. I think it can help you.

Special character display

Post Author: Eany
CA Forum: General
Depending on a @parameter, in my detail,
I need to display either spaces if "N", or a right pointing white arrow, within a blue circle background, if "Y".
How do I contrust such a display ?
I can draw a box, and use roundings to get a circle, but how to get the arrow on top of it, and how to suppress te whole lot if @parameter is "N" ?
Thanks in anticipation.

Post Author: SKodidine
CA Forum: General
The easiest way would be to create an image (jpg or bmp) of a right pointing arrow with blue circular background and then insert it into the report. Then, right click on the image then 'Format Graphic' and the under the Common tab, click on x-2 next to suppress and in the formula workshop window type
@parameter = 'N';
This should suppress if the value is N which will result in a blank and display the image if the value is Y.

How do I get Special character Euro symbol € to display ?

Hi,
How do I get the euro symbol € to display in Flash from
PHP file created in DW ?. It does not display it properly. I have
simplified the PHP code I have is:
<?php
$msgtoflash = "This is the Euro Symbol &#8364";
print ("&Databaseinfo=$msgtoflash");
?>
The &#8364 is a special character code for HTML.
If I use the $ or £ symbols it works perfectly but not
€ ?
Thanks,
Paul

maith wrote:
> Im using Actionscript2. I had placed a query in Flash in
"General
> Discussions", before I came on the Dreamweaver Forum,
but got no reply.
The way to get the euro symbol to display in Flash is to use
XML. I have
tested this, and it works:
euro.php
<?php
header('Content-type: text/xml');
echo '<root>
<elem>This is the euro symbol:
€</elem>
</root>';
?>
ActionScript 2.0 to display the value of <elem> in a
dynamic text field
called myText:
var myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.onLoad = handleLoad;
myXML.load('
http://localhost/test/euro.php');
function handleLoad(success) {
if (success) {
var theRoot:XMLNode = this.firstChild;
myText.text = theRoot.firstChild.firstChild.nodeValue;
} else {
myText.text = 'Not working :(';
Handling XML in ActionScript 2.0 is like poking needles in
your eyes,
but it's the only way I have been able to get the euro symbol
from an
external source into a Flash movie.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Special Character not displayed correctly on Japanese OS

Hi,
I have an application build in LabVIEW that I want to install on a Japanese OS but some of the special character are not displayed correctly like °.
Is it possible to tell my application to use the US ASCII table to display character? Or I need to code special case for Japanese OS?
Thank you
Dany
Dany Allard

Hi Dany,
It sound like tyou are trying to localize your application to Japanese. You might want to take a loot at this link here
Joe Daily
National Instruments
Applications Engineer
may the G be with you ....

How can i display special character?

how can i display special character that come from DB.
for example i have in field in Table that has this value <Id, r>.
i want to print this value to the html. and replace the <,> to special character.

"<" is "<"
">" is ">"

Display special character on web page

Hello,
Is it possible to display the special character < or > in a bsp page ?
I try to do it but it seams to be interpreted as HTML and nothing is printed.
In material description in purchase requisition we have < material desc > and I would like to show this in a tableview.
For the moment I delete the special character in a string variable but it does'nt correspond to my need.
Thanks for your help
Véronique.

Hello,
You could try something with special characters :
e.g. this code
&#171 material &#187
produces this output
« material »
Best regards,
Dirk.

How to make SAPScript to display special character?

Hi all,
How to make SAPScript to display special character like character in 'Wingdings 2' font type? Now, I cant make SAPScript to display those special characters in the font type.
Best Regards,
Chee Boon

Hi,
Insert your font with SE73.
Then set in sapscript with paragraph or character format so that yoyur charracter is printed with the font you wanted.
Gr., Frank

Display of special character u0151 through std. text

Hi,
I want to display a special character <h3>ő</h3> through standard text. But when I enter the character into the text it automatically removes the double quotes with simple character "O".
The same is working fine in other system.
Any pointers will be helpful.
Regards,
Sachin Dashmukhe.

Hi Gayatri,
Thanks for replying.
But the special character i mentioned is not available in the list of characters present in the menu path you gave.
-Regards,
Sachin D

Display special character for 'Artihmetic mean'

I can't find the character for 'Arthmetic mean', it's 'x' with a line above, any ideas!?
I've searched several font (Symbol, Wingdings etc) but didn't found that special character...!

Oh, I do apologise. I saw the character on wiki and assumed it was a character, rather than a graphic.
Usually, to create interesting unicode characters, you can combine diacritics. For instance, xbar is X followed by ¯;
x̄
(might not display on unsupported browsers)
However LabVIEW doesn't support this, and will print x ¯ and I can't find any info on how else it might be implemented.
You might be able to find a hack in this document
And in the meantime, you can kudo this suggestion
- Cheers, Ed

Display Special Character

Hi,
I have developed a report which display the result in ALV. I found that the character '&' was converted to another symbol. Is there any FM or thing that can resolve this?? Besides, when I put '&' in the forum search, it returns error. Does SAP support special character??
Regards,
Kit

Hi Kit,
You could try something with special characters :
e.g. this code
&#171 material &#187
produces this output
« material »
Even better is this one &#60 material &#62.
kindly reward if found helpful.
cheers,
Hema.

Special character - Bullet point

I have a string l_str type STRING value 'abc'
I want to concatenate the special character bullet (like in MS word) in front of the string. How do I represent the bullet character? Any sample code?

Hi,
You can concatenate the special characters in Bullet form.
For this purpose goto se11Table -ICONExecute it and you can see all the icons .
From there you can take the icon name and goto SE11- Type Pools ICON, there you can also see the Symbols defination for the Icons.
You can take the symbols and concatenate it with the string.
Hope it helps you.
Thanks
Arbind

Domain User profile displays special character "?" in command prompt.

HI All,
In our organization, there is one domain user in his profile it shows special character "?". which is stoping JAVA application to Run.
When you see it in windows explorer, c:\users\username. I am not able to see any special character.
But when i am login to command prompt and check it shows c:\users\username?> Here at the end of the user name i am seeing "?". Which is giving problem to run JAVA application. I checked user profile ( Firstname, lastname , givenname)
and there i couldnot able to see any space or special character. The only thing i can see in adsiedit user properties in "TextEncodedORAddress" attribute it shows
C=US;A= ;P=abc;O=Exchange;S=User?;G=xyz;I=M;
When i check this properties i can see the same in exchange user properties in X400 address.
I try to edit and remove the ? but again it is creating new address with removing ? but reply as it shows with the user name with special character. As i dont know from where it is getting the special character.
Any help for this will be appreciated...
Thanks & Regards,

check out this link, it might help:
Moving and Renaming User Accounts
https://technet.microsoft.com/en-us/library/ee198798.aspx
example from link above:
Listing 7.19 Renaming a User Account Within the Same OU
1
2
3
4
Set objOU = GetObject("LDAP://ou=Sales,dc=NA,dc=fabrikam,dc=com")
objOU.MoveHere _
"LDAP://cn=BarrAdam,ou=Sales,dc=NA,dc=fabrikam,dc=com", "cn=LewJudy"
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Special character in interactive report using filter

Hi,
I created an interactive report and in this report there is a filter to search any row from specific value linked to a specific column.
As example this report displays a board with some columns like "SR number", "Status", "Description", ....
If I use this filter with standard character all works fine :
- in the filter's list of values I choose "Region" column
- in the search field I put "SE"
- click on go and the board is generated with all correct rows.
If I use this filter with special character (french character in my case), this filter changes this special character and the request doesn't return any row.
Example :
- in the filter's list of values I choose "Statut" column
- in the search field I put "Réception"
- the filter's expression is modified from "Réception" to "RÃ©ception" so no row is returned (filter - Statut contains 'RÃ©ception' - no data found)
I modified the character set used by the apex DAD changing the nls_lang parameter in the wdbsvr.app file from AMERICAN_AMERICA.WE8ISO8859P1 (database character set) to AMERICAN_AMERICA.AL32UTF8
But when I check the apex DAD character set after the web server restart (about Application Express in my workspace) I get :
NLS_CHARACTERSET: WE8ISO8859P1
DAD CHARACTERSET: ISO-8859-1
No change.
I used the Application Express 3.2.0.00.27 with Oracle E-business Suite (11.5.10.2).
Any help will be appreciated.
Best regards,
Olivier
Edited by: oll on 1 mars 2010 20:57
Edited by: oll on 15 mars 2010 21:17

Hi,
Thank you for your answer.
But I already installed french language on apex.
Unfortunately issue occurs yet.
To install the french language I followed these steps :
- I set the NLS_LANG to American_America.AL32UTF8
- sqlplus sys/**** as sysdba
- ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
- and I executed the load_fr.sql script
Thank you for your help.
Best regards,
Olivier

SM Special Character Displays as Bullet

Similar Messages

Maybe you are looking for