SM  Wily Introscope Version 8 doc question

We also installed Wily Introscope Version 8, however there was a part mention as below
The Solution Manager Diagnostics provides an application that performs the setup of the
Introscope bytecode agent for Java automatically. This section explains the steps to run
the setup. Before you can run the Introscope agent setup, the setup wizard for the
managed system must have been executed.
1. Enable Maintenance Mode on SMD.
2. Deploy ISAGENTSMD*.SCA using SDM.
3. Disable Maintenance Mode on SMD.
4. Launch the Introscope Setup application: Diagnostics Setup -> Managed Systems ->
Introscope Agent. Your screen will look similar to the image below:
Questions:
1) How do I go into SMD ? I did use http://<SMserverFQDN>:50000/smd however I only get a header but blank content body in IE or FireFox? Where do I enable maintenance mode?
2) Where do I launch the Introscope Setup Application: Diagnostics Setup ?
I can't find it under Introscope workstation console.
Thanks.

Hi,
Regarding your questions, please kindly check
Root Cause Analysis Installation and Upgrade with SOLMAN_SETUP
>>>
from https://websmp202.sap-ag.de/diagnostics.
Hope this helps.
Cheers
SH

Similar Messages

  • Wily Introscope Version for Solution Manager 7 SPS 17

    Hi
    We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
    I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
    On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
    I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
    Looking in the SWDC there are downloads in  SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
    Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
    Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
    Thanks for any help.
    Paul.

    Hi Bhudev
    Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
    As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
    When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
    the first 2 (of 23) setups are failing :
    SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    BI Cannot invoke CCMSBISETUP on host localhost
    Warning :
    User(BI) Role SAP_BI_E2E does not exist
    Then it says :
    To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
    I cannot find this Diagnostics Setup Guide for SP17 ?
    The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
    Thanks,
    Paul.

  • Wily Introscope for SOLMAN 7.1

    Hi All,
    We are configuring SAP Solution Manager 7.1
    I have few doubts regarding Wily Introscope.
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    2. Is it installed already with SOLMAN or need to be installed manually?
    3. I need details about licensing policy of Wily Introscope.
    4. If it is necessary to install please provide suitable link for installing it.
    and I have one more question.
    We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
    Shall we proceed with warning. or it needs to be fully performed without warning.
    Please guide us.
    Thanks & Regards,
    Ishan

    Ishan trying to answer all your doubts:
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    If you need to implement RCA then only Wily Introscope is required.
    2. Is it installed already with SOLMAN or need to be installed manually?
    It has to be installed manually..Just follow the standard guide..
    3. I need details about licensing policy of Wily Introscope.
    Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give  a call to SAP..
    4. If it is necessary to install please provide suitable link for installing it.
    Follow this link :
    http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
    Thanks & Regards,
    Joydeep

  • Wily Introscope Manager

    Guys,
    I have some questions about Wily Introscope Manager.
    What is the difference between Wily Introscope Manager Workstation and WebView?
    I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
    In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
    Thank you so much again Experts
    Rer

    Hello Rer,
    What is the difference between Wily Introscope Manager Workstation and WebView?
    Webview = Html version using Microsoft SIlverlight
    Workstation (also called Investigator) = Java version
    The latest is recommended since it has more features and it is more stable.
    I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
    See the SMD Agent log files, it is responsible for such data. Report problems here or in customer message.
    In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
    These two locations are below the trees SAP HostAgent Process and SAP Netweaver. The first one is the host data + abap data (extracted from SMD Agent, SAP HostAgent, sapOsCol) and the second is Netweaver data extracted from the Introscope Agent.
    Problems in the first node, check smd agents, setup wizards.
    Problems in the second, check introscope setup.
    Best regards,
    Guilherme

  • Wily Introscope 8.2.2.0

    Hallo,
    I´m installing Wily Introscope 8.2.2.0 on Solution Manager 7.0 EHP1. I proceed according to
    installation guide. Problem appears, when I want to launch Enterprise Manager as Windows Service.
    In EMService.log I found this:
    ERROR  | wrapper  | 2010/05/18 10:23:39 | License Error:
    ERROR  | wrapper  | 2010/05/18 10:23:39 | A valid license was not found in the Wrapper configuration file.
    ERROR  | wrapper  | 2010/05/18 10:23:39 |
    ERROR  | wrapper  | 2010/05/18 10:23:39 | A license can be obtained from the Java Service Wrapper site:
    ERROR  | wrapper  | 2010/05/18 10:23:39 |   http://wrapper.tanukisoftware.org/doc/english/purchase.html
    ERROR  | wrapper  | 2010/05/18 10:23:39 |
    ERROR  | wrapper  | 2010/05/18 10:23:39 | Licenses can be generated for any of the following Host Ids.
    ERROR  | wrapper  | 2010/05/18 10:23:39 | The first Host Id is recommended.
    I looked on this pages and license for Java Service Wrapper is only for purchase.
    I thought that Wily is licensed by SAP or do I concern myself?
    Thanks for help.
    J.M.D

    I used the latest version I found:
    SAPISEM02_0-10007433.SAR - introscope8.2.2.0windowsAMD64SAP.exe
    osgiPackages.v1.2.windows.zip
    SAPISMM8SP01_00-10007429.SAR -  SAP Management Modules
    I have one NonFatalErrors. I found that i can ignore it.
    Summary
    Installation: Successfulwith errors.
    395 Successes
    0 Warnings
    1 NonFatalErrors
    0 FatalErrors
    Execute ANT Script:       Script:
                              Status: ERROR
                              Additional Notes: ERROR - D:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:451: exec returned: 1

  • Wily Introscope Clarification

    Can someone help clarify where I'm supposed to install the Wily Introscope Manager?
    I installed on my solution manager server, is that correct?
    I thought that the Wily Manager goes on Solution manager server and the wily agent goes on sap web applications.  Please help me clarify.
    thanks.

    Hi,
    You have to install the ISAGENT on solman only. Later you deploy it on managed systems via:
    http://<server IP>:<port>/SMD
    Managed systems-> introscope agent
    If you mean the Enterprise Manager it's installed normally on the SOLMAN host. On windows it runs as a Service.
    For official documentation:
    Introscope Version 8 Installation Guide For SAP:
    https://websmp104.sap-ag.de/~sapidb/011000358700001995842008E.PDF
    On page 4 you'll find nice explanation regarding your question.
    and also check: Note 797147 - Wily Introscope Installation for SAP Customers
    Cheers,
    Diego.

  • Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

    Hi Experts,
    we are able to log in wily introscope, But metrics(values) are not coming in wily
    we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
    2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
    thanks in advance for you help
    Best Reg

    Hi Srivastav.
    Actually i am new to solution manager, and we have done basic steps of solution manager like
    system preparation,basic configuration,managed system configuration and technical monitoring,
    in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
    my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
    currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
    Best Regards,
    Hanuman

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • Wily Introscope 8.2.2 - No License for Wrapper service

    Hi All,
    I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
    STATUS | wrapper  | 2010/09/20 15:10:47 | --> Wrapper Started as Service
    STATUS | wrapper  | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
    STATUS | wrapper  | 2010/09/20 15:10:47 |   Copyright (C) 1999-2009 Tanuki Software, Ltd.  All Rights Reserved.
    STATUS | wrapper  | 2010/09/20 15:10:47 |     http://wrapper.tanukisoftware.org
    STATUS | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | License Error:
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
    ERROR  | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
    ERROR  | wrapper  | 2010/09/20 15:10:47 |   http://wrapper.tanukisoftware.org/doc/english/purchase.html
    I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
    Regards,
    Masoud

    Hi 
    For the Wily Introscope Enterprise Manager 8.2 the error you described
    occurs if the em-include.conf file is missing in the EM' installation.
    This file is included into the SAP managed modules SAPISMM02_0*.SAR
    file.
    Note that for Wily Introscope EM 8.2.2 you need to install the SAP
    management modules after the installation of the EM 8.2.2 AND before
    you attempt to start the service
    Please refer to the Node 797147 for the documentation about the
    the SAPISMM02_0*.SAR - management modules to be installed on top of
    Enterprise Manager.
    Please consider additionally the Note 1273028
    - The Enterprise Manager can only be launched as Windows Service
    after the latest management module package (SAPISMM) has been
    installed. The SAPISMM package contains a file em-include.conf
    which is required.
    I would like to ask you to implement the Note 1273028 and to retest the
    issue.
    Best Regards
    Jai Wardhan

  • Error while installing wily introscope 9.1.5.0

    Dear Gurus,
    While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
    Invalid External Component Package Specified
    The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
    Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
    Balaji

    Hi Divyanshu,
    i copied the downloaded files in that stage directory and install it.
    i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
    Balaji

  • Wily Introscope on high availabilty

    Hi All,
    Our solution Manger is on high availabilty. We want to install Wily Introscope manager on our Solution Manager. How can we install it on high availabilty. Please help.
    Also Wily Agents(on managed systems) need to be installed on only Stand Alone Java Systems or on ABAP+JAVA systems also.
    Appreciate your help.
    Thanks and Regards,
    Subashree

    Hello Subashreekannan ,
    To setup the EM in a cluster scenario you may refer to the [Wily Introscope Setup Guide 8.0 |https://websmp204.sap-ag.de/~sapdownload/011000358700001995842008E/SAPISDOC02_0.pdf] in section "Enterprise Manager Cluster Setup".
    To setup the EM in a Failover scenario, you may refer to the [Wily Adminsitration and configuration guide|http://www.scribd.com/doc/44471028/Introscope8-0-2-0ConfigAdminGuide] in section "Using MOM Hot Failover".
    Regarding the ISAgent, the Introscope Agent setup should be performed for JAVA and dual stack systems. It is not neessary to perform the ISAgent setup only for pure ABAP systems.
    Regards,
    Allam

  • Wily Introscope 7.1 error

    Dear all,
    Facing a bizar issue.
    I'm configuring Solution Manager Diagnostics (on Win2003 Server / IA64-bit, java 1.4.2_12) and installing Wily Introscope Enterprise Manager 7.1.
    Did the installation as described in the setup guide; the ccms/wilyintroscope in /usr/sap is created, the windows service is created an running. But when checking the log (IntroscopeEnterpriseManager.log) to verify EM is running I don't find the line 'Server listening for incoming .... on port 6001'.
    I also installed WebView on SAP NetWeaver and I'm able to display the login-screen, but i gives me the message 'This WebView instance is connected to the Enterprise Manager on unconnected.', while unconnected should be something like localhost.
    Someone any idea?
    Any help is highly appreciated!
    Tnx
    Roel

    Hello,
    I have the same problem.
    Moreover, in the logs I have "The EM docs webapp could not be started"
    Thanks for your reply !
    Chakire

  • Wily Introscope and "searchPrincipalDatabags"

    We have installed Wily Introscope (downloaded from SAP support) on our sandbox and Development environment and so far so good….
    We have the enterprise manager installed and have agents loaded on two SAP Enterprise Portal systems and both are sending data to the Wily enterprise manager. One of the two system seems to be locking up after about 2 hours of operation.
    We need to understand how to analyze the data we are receiving in WILY to troubleshoot our issue.
    Questions
    1) What is the best method to obtain info on how to analyze the data in Wily enterprise manager?
    2) We can see that just before the system stalls/locks up there is one "process" that seems to stand out: previous to the lockup this process is quick but then the number jumps up high to 120049
    example:
    SAP J2EE|User Management|DataBasePersistence|searchPrincipalDatabags     1     120049     120049     120049     120049
    What is searchPrincipalDatabags? and is there a known problem with this?
    Any input is appreciated

    > Depends on what you mean by big? We have 3066 users
    > and we are NOT using an external LDAP, thus we are
    > using the standard portal user store.
    Ok. We had issues with UME when someone wanted to see "all" users - who are stored in an external LDAP, that locked the server process too.
    > I have opened a OSS ticket, but did not assogn it to
    > (XX-PART-WILY) because I'm under the impression that
    > this is a portal issue, And I just need to be able to
    > interprete the info coming from Wily? does this sound
    > correct?
    Is the portal also locking up if the "wily agents" are not loaded?
    Markus

  • Wily Introscope as monitoring tool?

    Hello everybody,
    we are looking for a tool capable of monitoring Systems with usage type "java", e.g. Enterprise Portal oder Process Integration.
    Has anybody experience with Wily Introscope, e.g. concerning usability?
    Whatever experience
    Thanks a lot
    Thorben

    Yes Wily is a very usable monitoring and diagnostic toolset for the J2EE platform. This is especially true for the NetWeaver Portal. SAP has gone to great lengths to instrument the Portal Stack and provides thousands of metrics on a typical Portal and there are tools to Monitor, Analyze, Trace, Track Errors all as part of the Read-only version delivered by SAP.
    The pre-configured dashboards are quite nice. The newer release allows use of the Introscope Workstation Version 7.1 product which is more feature rich than the WebView user tool, and this is a plus.
    If you want to integrate to an automated Alerting System you'll have to buy the Solution Enablement Pack. You can read more about this at service.sap.com/diagnostics.
    Frank

  • Problem Wily Introscope Installation!

    Hi,
    I can not install on the server of the Solution Manager Wily Introscope ENTPR MGR 8 -> AIX 64bit 5.3 - java version "1.4.2"
    Java (TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7) (JIT enabled: jitc)
    Used files are:
    SAPISEM8SP01_00-10007374.SAR
    osgiPackages.v1.1.unix.tar
    eula.txt
    Can you help?
    Best Regards.

    Hi,
    I installed the EM as explained Inst.Guide_Introscope Ver.8 for SAP
    using the files:
    SAPISEM8SP01_00-10007374.SAR (introscope8.1.0.0aix64SAP.bin)
    SAPISMM8SP01_00-10007429.SAR (management modules)
    Then I deploy with SDM the ISAGENTSMD801_01-10007435.SCA.
    Then I launched SOLMAN_SETUP:
    Initial Configuration -> ok (green)
    Basic Configuration -> ok (green)
    Managed System Configuration select the stack of hava Solman and click on "Configure System", Diagnostics Prerequisites are ok.
    In step 2 "Manual Configuration":
    -Install Diagnostics Agent (it was previously done by SDM)
    -Assign Diagnostc Agent -> Open URL -> Agent Administrator
    The problem arises at this point if you click on "Show offline agents" list is empty!
    Then I also tried to install the Wily Introscope Agent at hand but might as well not start.
    Can you help?
    My Solution Manager has been upgraded to 'EHP1 on AIX 5L with JVM:
    Java VM version: J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20090307 (SR13) (JIT enabled: jitc)
    Java VM vendor: Classic VM (IBM Corporation)
    java vm type: <default>
    java vm cpu: ppc64
    Regards.
    Diego.

Maybe you are looking for

  • Mail in my sent box won't open if sent prior to 11/26/12

    I'm running OS X 10.7.4 and Mail 5.2. Today I needed to refer to an email I sent on 11/17.  When I clicked on it all I got is the spinning "loading" message and it never opened.  I tried clicking on some other sent emails and discovered that anything

  • SCCM 2012 SP1 - Secondary SUP Sync Source Server Changed without intervention

    Hi, Recently I noticed that some of ours Secondary SUP's have stopped syncing. Looking at the logs I found that they cannot found SUP parent. Name resolution was OK, no firewall blocking traffic flow, SUP at Primary Site working normally, all replica

  • Creating planning functions

    Hi, In BPS, I have created Planning area, planning levels, and planing packages, but when i try to create planning functions, i get the message "select a node in the related tree". plz guide me how to create the planning function. thanks Priya

  • I do not know the password to the account iCloud

    I bought an iPhone 5 from the store in my country (Romania). phone was used by my son who remembers iCloud account password and can not reset your password. I specify the phone bill and all documents in my name. What can I do? thanks

  • What happened to the JATO forum (id=103) AKA Web Application Framework

    What happened to the Jato forum? (id=103) AKA Web Application Framework I was available a few weeks ago? Now I'm redirected to this forum=122.