SM01 - Limit locking to specific transactions

Hello,
I'm a fairly new SAP Basis Admin and have been tasked with the following:
"Hi Joe
For finite scheduling we need Gary R and Mike D to have access to lock certain transactions and see what users are using those transactions. Can we therefore add the following to the Finite scheduling profile:
1)     SM01 u2013 Lock Transactions. Can you see if they can be limited to Transactions CJ20n and CN25?
2)     SM04 u2013 User list
Thanks and Regards
Alan"
Item 2 is easy enough to add to the single role.  My question is how do I perform item 1?  The "finite scheduling" role is assigned a very limited number of personnel, however we don't want to grant them full access to SM01.  Any help would be appreciated!
Thanks,
-Joe

What you could also add is only locking those tcodes which are not used anywhere by other code which is functionally the same, then let only those be locked.
The list will ne quite short and the effort not worth it...
It is also very error prone.
Cheers,
Julius

Similar Messages

  • How to monitor a specific transaction in Solution Manager ?

    Hi all,
    I have configured the Service Level Reporting and it works correctly.
    But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
    In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
    Have i to configure the Business Process Monitoring ?
    Thanks.

    Hello,
    it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
    In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
    Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
    Best Regards
    Volker

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • Does anyone know how to lock a specific application, such as e-mail in Ipad?

    I have my company email in my Ipad and I want to lock it in order to prevent whoever uses my Ipad to login to my email. Does anyone know how to lock a specific application or it cannot be locked?

    There is a somewhat clunky way to do it. First, go into your mail (Settings - Mail/Contacts/Calendars) and turn off (dont' disable) any accounts you don't want to be seen. Then go into Restrictions - Accounts and select "Don't Allow Changes." This will prevent anyone from turning the mail back on. When you're ready to turn it back on, go into Restrictions and either Disable Restrictions or go into Accounts and select Allow Changes.

  • The requested object is locked by another transaction

    Hi All,
    I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
    'The requested object is locked by another transaction'
    Message no. MC602
    Diagnosis
    A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
    Technical Information: The C_ENQUEUE routine returns the following values:
    COLLISION_OBJECT = ERSMONFACT
    COLLISION_UNAME = SINGH
    System response
    The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
    Procedure
    Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
    I tried SM12 but there is no lock entry, can u suggest some thing?
    Regards,

    Hello,
    here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
    Here two things to look :
    1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from  RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
    2.GO to SM12 try to search the object there and remove the lock.
    Thanks,
    Deepak

  • Trial Balance with specific transaction code

    Hi all,
    I want to print the trial balance showing balances of all the GL after considering only choosen (specific) transaction code.
    Please help..
    Thanks
    Sanjeev

    Hi Sanjeev,
    Use Transaction Code F.08 for Trial Balance or "G/L Account Balances"
    The G/L account balance list shows the following monthly figures:
    o   balance carried forward at the beginning of the fiscal year
    o   total of the period or periods carried forward
    o   debit total of the reporting period
    o   credit total of the reporting period
    o   debit balances or credit balances at the close of the reporting period
    Assign point if useful
    Regards
    Sandeep Acharya

  • What is the best way to start SAPGUI in a specific transaction

    Hello,
    What I'm trying to do is to run a Java program that will start SAPGUI (in windows format, not HTML) and present the user with a specific transaction with some data already inserted.
    I already managed to start the SAPGUI and I know how to fill in data using the SapJCo but my question is: what is the best way to navigate to a specific transaction? I can activate an RFC of BAPI_CALL_TRANSACTION but it seems like a big overhead. so, can any of you tell me what is the best way activate a specific transaction in SAPGUI using JCo?
    Thanks,
    Uri Lifshitz.

    Uri
      JCO are mostly used to executed a RFM on the Destination.
      I don't think we could call a Transaction using JCO.
    Thanks
    Jack
    <b>Allot points if my post helps !!!</b>

  • How to lock a specific text message so it wont be deleted

    I would like to lock a specific someoen sent me but if i delete the rest of the the thread i wont that line will still be there. I used to do it on androind phone wasnt sure if iphone could do that as well.

    That is not a feature of the iPhone. Submit your feedback requesting such a feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback
    Meanwhile, you could always copy the message you want to save (tap and hold the message, select Copy) and save it to Notes or somewhere else.
    Best of luck.

  • How to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

    Is it possible to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

    Here is one from Pondini, who was the foremost Time Machine expert in the world.
    http://pondini.org/TM/Airport.html
    And another from Apple. Info near the bottom.
    AirPort base stations: About USB disks
    And another miscellaneous from Apple:
    AirPort base stations: Time Machine hard drive compatibility

  • How to lock a specific record

    Let’s say I need to lock a specific record from a form so nobody could even select this record from database.
    How do I do this?
    Thank you in advance

    Add a default_where property for your block that will eliminate this record from being selected.
    For example:
    set_block_property('emp','default_where','ename!='SCOTT');

  • About to lock a specific app on the phone

    I would like to know if there is a way to make a lock on a app. Like i have the amazon app in i want it to be locked is there a way to lock a specific app?

    No

  • Ledger specific transactions to be maintained for IFRS reporting

    HI
    We are involved in the implementation process and need to maintain the leading ledger as per US GAAP and also the ledger required for IFRS reporting. What will be the ledger specific transactions? Sharing same COA, do we need additianl account groups to identify them seperately or what is the procedure? Can a comparison report be generated?Also how is the material ledger maintained?
    Please Help V_Shekhar

    Hi,
    Pls Check this thread
    [leading ledger and non-leading ledger|leading ledger and non-leading ledger]
    Check this links
    [http://sapfico-answers.blogspot.com/2010/02/sap-ecc-60-new-new-gl.html|http://sapfico-answers.blogspot.com/2010/02/sap-ecc-60-new-new-gl.html]
    Hope this will Help you!!

  • Error -2038: Record locked by another transaction / Internal error occured

    Hi, sometimes when I'm trying to update a SO via DI API, I got this error -2038. The error message varies, either: "Internal error occured" or "Record locked by another transaction". Ffor 'record locked' error, the table/field names varies, eg.
    [RDR1.ItemCode][line: 7]
    [RDR12.TaxId8][line: 1]
    [WTR1.ItemCode][line: 1]
    [RDR1.ItemCode][line: 9]
    [RDR1.ItemCode][line: 3]
    [RDR12.TaxId2][line: 1]
    [RDR12.CityS][line: 1]
    Any idea what the problem might be? FYI I'm using PL41, and this DI calls are from a centralized 'handler' VB.NET program. I've also released the instantiated BO objects via System.Runtime.InteropServices.Marshal.ReleaseComObject() (http://support.microsoft.com/kb/317109)
    Thanks.

    David: what do you mean by 'S-User for the Marketplace'? I think I'm not an S-User, so I still can't login... How can I be an S-User?
    Anyway, I'll close this question, even though it's not really solved. I can't find any other user updating the same document, but that -2038 errors still pop up.
    Currently I'm using John's approach to retry whenever I got -2038. As long as it works and everybody's happy I guess...
    Thanks everybody.

  • User Specific Transaction Variant

    Hi,
    Can i please have guidelines for Transaction variant creation, specially user specific transaction variant creation along with example?
    Regards,
    Samir Wadajkar

    Dear
    Please see this wiki for useful :http://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation
    OR
    Go to SHD0
    Enter the transaction code - Enter the transaction variant YXXX under transaction variants tab
    Create - the transaction variant. When you back after creating .... Save all the screens and do a syntax check - this will take you to different screen - Just execute and come back
    You should now be in SHD0 with your transaction code as well as transaction variant.
    Now, go to 'GOTO' on application tool bar - Create transaction variant. Do not check 'Inherit GUI attributes' under classification and check all under GUI SUPPORT
    Execute your newly create Ytransaction
    Go back to SHD0 again and repeat the same process but enter different name than previous one. do the exact same process.
    Create new transaction which means enter different transactio name like if the previous one is yxxx1 ... create this as yxxx2.
    You can take the standard transaction from every user or who you dont want to give by removing the authorization from user master (talk to security people)
    Hope this will be usefull
    Regards
    JH

  • Deletion of specific transaction in FF67

    Hi All,
    Can you suggest how can we deletion/modify a specific transaction from FF67 Manual Bank statement. FEBAn has also been processed for this Manual Statement.
    For example:
    In FF67 we have 200 transaction, out of one transaction the user has input wrong customer and also processed FEBAN transaction  for all the 199 transaction and realized that the customer has been wrongly keyed in FF67 (it displays red light in FEBAN) but the amount is correct.
    Now how can we correct this single transaction in FF67.
    Do suggest.
    Reagrds,

    Hi All,
    Can you kindly provide any workaround for our issues.
    Do revert.
    Regards,

Maybe you are looking for

  • Wi-Fi on my iPhone 5 says the password is incorrect when it is

    So my phone is on iOS 6.1.4. I don't want to update it because I don't like iOS 7 at all. Just how I view it, anyways. So please don't say restore or updating your software will fix the problem, because I'm pretty sure there are workarounds. However,

  • Error when starting iTunes for windows 64bit

    When I start itunes (latest version as of 26-1-2014) I get the following error: The procedure entry point ?fastFree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll. I am working on a Windows 7 64 bit version. Please

  • How to unlock the iPad to all networks

    Hi my iPad is locked on network Three and will not allow me to use any other sim,  how do yo unlock it so it's opened to all network ?

  • Force a commit statement

    Hello, Is it possible to automatically force a commit statement in a JSP page after you have inserted or updated a record ? Greetz

  • Im having trouble with the new mountain lion upgrade!

    I bought the new upgrade and this is whats coming up....The product distribution file could not be verified. It may be damaged or was not signed.