SM04, AL08 active unknown users getting increased

Hi All,
While connecting through SAPGUi, getting an error
"Application Server is overloaded currently"
"Maximum no of connections terminals reached"
If i checked in the sap system in "SMO4 and AL08" the no of unknown users is continually increasing" and these are showing as active users without any name.
the user name is blank, and it continually increasing like this. we are having only 5 users created in the system.
If i am terminating the users from SM04 and again its coming after refresh like this its increasing like 200, 3000....etc users.
Due to this i am getting above mentioned error.
Please help me on this, why the unknown users are getting increased and those are GUI users not RFC users.
Please suggest, how t fix it and what may be the root cause
Thanks in advance.
Best Regards
Vamsi

Can you please paste the trace file dev_w0,dev_disp from the work directory.
Also check this SAP note
Note 1040464 - Blank row in SM04
Try upgrading the kernel .
Regards
Ratnajit

Similar Messages

Which table stores SM04 (currently active users) data?

HI all,
what is the table which stores the SM04 currently active users data in sap?
plzzzzzzzzz help me..
Thanks all in advance ,
Malti

SM04 uses a kernel call to get the active user data, not table is involved:
Get the list of logged on users
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TAB' FIELD USR_TABL-SYS.
Markus

Why do I get "Unknown user name or bad password" on Windows 7 when trying to connect to an SMB share on my Mac?

Before installing the update to 10.7.3 I could connect to an SMB share on my Mac from Windows 7 but I can't any longer. When I try I get the error "Unknown user name or bad password" on the Windows 7 system.
When I try to connect using the "net use..." command I get the error: "System error 86 has occurred".
Does anyone know how to resolve this? What really confuses me is that it was working fine until I installed the update to 10.7.3.

Check the Wins Tab in the Advanced section of Network in system preferences.
If you don't have the same workgroup name and the correct NetBIOS name showing up in the WINS tab you will get the Bad username or password.
I know I deal with this everyday.
There is something wrong with Lion and it does not automatically fill in those entries in the WINS tab.
What I have to do on every reboot/startup is open System preferences go to Sharing and uncheck File Sharing then recheck it. That will fill in the WINS tab entries.

Getting Active Directory Users in UCM User Admin - Users Tab

Hello All
We have integrated WLS with our Active Directory. And we are getting all the active directory users under Security Realms >myrealm >Users and Groups tab in WLS Console.
We are also able to login to webcenter spaces and Content server using those userid and credentials. But our problem is in UCM under Admin Applets - User Admin - Users tab all the active directory users are not listed. So we are not able to assign particular roles to the users.
When a particular Active Directory user logins in UCM (First Time) after that the admisistrator (weblogic) is able to get that user under Admin Applets - User Admin - Users tab. And also it comes as an External user so we are not able to assign role.
So basically UCM requires a login to get all the users listed in users tab.
Our requirement is we want all the Active Directory users to get listed in UCM without the condition that the users has to login in content server once.
Thanks

Hi Navin ,
First and foremost the requirement that you have posted is not possible and the reason for that is :
Users are created on AD which is outside the realm of UCM hence there is no way that the users created on AD will be shown up under Users tab without they login atleast once . UCM does not know which all users are part of the realm until and unless the AD users login in atleast once .
Secondly external users cannot be assigned roles from UCM because when the Auth type is set to External UCM sees it as external entity hence not giving it any way to relate roles / groups from UCM . As a workaround you can change the AuthType for the External users to Global from User Admin applet after the users login for the first time . This will enable you to assign roles / groups for the AD users .
Hope this helps .
Thanks
Srinath

Unknown user appears in get info permissions list

unknown user appears in get info permissions list of a lot of folders. I cant remove the user, change the permission level of that user. Is there a way of getting over this problem?
Here is a screenshot of the unknown user...
http://i228.photobucket.com/albums/ee151/cosmac2007/Picture5.png

pzeitler, i tried your fix. it worked but only partly. i had to go to an admin account and do the sudo because my non-admin account that was affected does not allow me to sudo from it. so i do it from admin account and it seems i add my non-admin user to all admin files\folders with full permissions and no admin account user. so i open the home folder in get info, add admin user and set permission, apply recursively to all inside it. How ever, i couldnt remove the non-admin user from admin user folder permissions.
now i go to non-admin user account and find that unknown grp is gone for all except three folders (public/sites/downloads). i also checked a third, non-admin user and it seems unaffected by all the operations that i have performed. but it has the unknown grp in it.
I guess i have to wait for apple to fix it rather than mess up the system myself.

When I respond to certain messages, I get an error message "unknown host" or "unknown user." Why is this?

Since the latest upgrade to 31.0, there are times when I will receive an e-mail, but when I send a reply, I get a response saying the message is undeliverable because of an unknown user, or an unknown host. These are messages, I'm replying to and have already received, so it's not a case of typing in an incorrect address.
This happens using both my computer and phone. Not sure why this is suddenly happening now, and why only with certain addresses. Any suggestions? Thanks.

my guess is they have invalid replyto information in the header. As it is on two devices, one of which can not run Thunderbird it is certainly not a Thunderbird issue.

What is the table which stores the SM04 currently active users data

HI all,
what is the table which stores the SM04 currently active users data in sap?
plzzzzzzzzz help me..
Thanks all in advance ,
Malti

Hi,
Pl. check in tables USR02/USR01 for the list of users & logon data.
Regards,
SDS

Need to wipe an iPad activated by unknown user will not restore with out id

iPad was purchased by a School and was stolen, retrieved but activated by unknown user. Will not restore with out user ID. Need help.

Take it to an Apple Store with your original proof of purchase and they should be able to help you.
Matt

Is it possible to get the active directory user name of the person

Is it possible to get the active directory user name of the person who is logged onto a windows computer, when they are using your coldfusion site, the same way asp pages can do that?

SECOND TRY TO POST THIS REPLY
You have to turn on "Windows Integrated Security" and turn off anonymous login in the IIS web server, once that condition is met the cgi.AUTH_USER variable will be popluated with the domain/username of the user logged into the cient computer.
If the user is using a windows browser on a windows client computer this will be done silently in the background. Otherwise they will normally be presented with a login dialog box by the browser.

How to get the active application users IP address in R12 by sql command

Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks

936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein

Hello all, I bouhgt a TV serial using my apple tv2 and my Apple ID information: all good. But then I got an e-mail from apple saying that an "unknown" user downloaded con ten using my apple ID. Nobosy stoled anything. How do I get my particular apple TV2

Hello all, I bouhgt a TV serial using my apple tv2 and my Apple ID information: all good. But then I got an e-mail from Apple saying that an "unknown" user downloaded content using my apple ID. Nobody stoled anything. How do I get my particular apple TV2 to recognize my apple ID account so it knows it is me who is buying. Thank you so much.

Dear AC,
Thank you so, so much for this answer. I did go into my Apple ID account through iTunes store and associated my devices to my Apple ID account. I did this by working on my computers (a mac mini and a mac air) and my two devices (iPhone and iPad). Thus there is a statemente saying "4 devices are associated with this apple ID and can download your purchases from iTunes in the iCloud". So whenever I use them to purchase anything, iCloud knows it is me through my devices so I do not get no e-mail warming me my account might be being used by a stranger.
So, how do I associate my apple Tv2 to my apple ID account? I went to its settings and could not find any way of doing it. Can you continue helpling me? Please.
Thank you so so much

Win7 PC w/ new Active Directory user not able to logon to Win 2K Domain

Hello Friends,
I'm having an issue where our Windows 2000 domain controller does not seem to be on speaking terms with a newly created user on a Windows 7 pro machine.
Here's what I know:
User & Computer are both in AD and work! I've logged in with the new user (Donna) on several machines and other users can log into the computer.
DNS appears to be configured properly on the Win7 workstation (pointed to DC)
DNS is running on the DC and doesn't appear to have any issues.
DCDIAG looks good, all passes except BASC, that failed.
Locally, I've added the domain account to the machine in the users control panel
Removing the account and the computer from the domain didn't work (I've also renamed the computer)
I thought about just renaming the current account that is working to the new user, however, I've always had issues after doing so.
Any thoughts?

Did you get any of these logs ?
529
Logon failure. A logon attempt was made with an unknown user name or a known user name with a bad password.
530
Logon failure. A logon attempt was made user account tried to log on outside of the allowed time.
531
Logon failure. A logon attempt was made using a disabled account.
532
Logon failure. A logon attempt was made using an expired account.
533
Logon failure. A logon attempt was made by a user who is not allowed to log on at this computer.
534
Logon failure. The user attempted to log on with a type that is not allowed.
535
Logon failure. The password for the specified account has expired.
536
Logon failure. The Net Logon service is not active.
537
Logon failure. The logon attempt failed for other reasons.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to display active directory users through weblogic portal Application?

Hi,
Does anyone has faced this situation?
I configured the activedirectory and able to see the users and group in the weblogic console at Security->Realms->Myrealm->users. when I run my portal application,I am able to see only the users that are configured in embedded weblogic LDAP ie, I can see only the users weblogic,portaladmin and yahooadmin that are of defaultauthenticator provider.I need to display the active directory users also in our portal.
I have two doubts on this?
1)Is it I need to write custom code to view the active directory users in our portal?
2)Does I need to use any jars that supports active directory authenticator?
I would appreciate if any one can reply on this with helpfull docs/information.
We are using BEA 8.1 SP4.
Windows 2000.
Surendra

Hi,
I too have a similar kind of requirement, i use a jsp to do this activity, but i get an exception, i have shown the entire jsp code below,
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ page import="java.util.Set" %>
<%@ page import="javax.naming.Context" %>
<%@ page import="weblogic.jndi.Environment" %>
<%@ page import="weblogic.management.MBeanHome" %>
<%@ page import="weblogic.management.configuration.DomainMBean" %>
<%@ page import="weblogic.management.configuration.SecurityConfigurationMBean" %>
<%@ page import="weblogic.management.security.RealmMBean" %>
<%@ page import="weblogic.management.security.authentication.AuthenticationProviderMBean" %>
<%@ page import="weblogic.management.security.authentication.UserPasswordEditorMBean" %>
<%@ page import="weblogic.security.providers.authentication.LDAPAuthenticatorMBean" %>
<%@ page import="weblogic.management.configuration.EmbeddedLDAPMBean" %>
<%@ page import="weblogic.management.security.authentication.UserEditorMBean" %>
<%@ page import="weblogic.management.security.authentication.UserReaderMBean" %>
<%@ page import="weblogic.management.security.authentication.GroupReaderMBean" %>
<%@ page import="weblogic.management.utils.ListerMBean" %>
<%@ page import="javax.management.MBeanException" %>
<%@ page import="javax.management.modelmbean.RequiredModelMBean" %>
<%@ page import="examples.security.providers.authentication.manageable.*" %>
<%@ page import="weblogic.security.providers.authentication.ActiveDirectoryAuthenticatorMBean" %>
<%@ page import="weblogic.management.utils.InvalidParameterException" %>
<%@ page import="weblogic.management.utils.NotFoundException" %>
<%@ page import="weblogic.security.SimpleCallbackHandler" %>
<%@ page import="weblogic.servlet.security.ServletAuthentication"%>
<%!
private String makeErrorURL(HttpServletResponse response,
String message)
return response.encodeRedirectURL("welcome.jsp?errormsg=" + message);
%>
<html>
<head>
<title>Password Changed</title>
</head>
<body>
<h1>Password Changed</h1>
<%
// Note that even though we are running as a privileged user,
// response.getRemoteUser() still returns the user who authenticated.
// weblogic.security.Security.getCurrentUser() will return the
// run-as user.
System.out.println("------------------------------------------------------------------");
String username = request.getRemoteUser();
System.out.println("User name -->"+username);
// Get the arguments
String currentpassword = request.getParameter("currentpassword");
System.out.println("Current password -->"+currentpassword);
String newpassword = request.getParameter("newpassword");
System.out.println("New password -->"+newpassword);
String confirmpassword = request.getParameter("confirmpassword");
System.out.println("Confirm password -->"+confirmpassword);
// Validate the arguments
if (currentpassword == null || currentpassword.length() == 0 ||
newpassword == null || newpassword.length() == 0 ||
confirmpassword == null || confirmpassword.length() == 0) {
response.sendRedirect(makeErrorURL(response, "Password must not be null."));
return;
if (!newpassword.equals(confirmpassword)) {
response.sendRedirect(makeErrorURL(response, "New passwords did not match."));
return;
if (username == null || username.length() == 0) {
response.sendRedirect(makeErrorURL(response, "Username must not be null."));
return;
// First get the MBeanHome
String url = request.getScheme() + "://" +
request.getServerName() + ":" +
request.getServerPort();
System.out.println("URL -->"+url);
Environment env = new Environment();
env.setProviderUrl(url);
Context ctx = env.getInitialContext();
MBeanHome mbeanHome = (MBeanHome) ctx.lookup(MBeanHome.LOCAL_JNDI_NAME);
System.out.println("MBean home obtained....");
DomainMBean domain = mbeanHome.getActiveDomain();
SecurityConfigurationMBean secConf = domain.getSecurityConfiguration();
// Sar
EmbeddedLDAPMBean eldapBean = domain.getEmbeddedLDAP();
System.out.println("Embedded LDAP Bean obtained...."+eldapBean );
RealmMBean realm = secConf.findDefaultRealm();
System.out.println("RealmMBean obtained....");
AuthenticationProviderMBean authenticators[] = realm.getAuthenticationProviders();
System.out.println("AuthProvMBean obtained....");
// Now get the UserPasswordEditorMBean
// This code will work with any configuration that has a
// UserPasswordEditorMBean.
// The default authenticator implements these interfaces
// but other providers could work as well.
// We try each one looking for the provider that knows about
// this user.
boolean changed=false;
UserPasswordEditorMBean passwordEditorMBean = null;
System.out.println("UserPwdEdtMBean obtained....");
//System.out.println("Creating MSAI....");
//ManageableSampleAuthenticatorImpl msai =
// new ManageableSampleAuthenticatorImpl(new RequiredModelMBean());
//System.out.println("Done....");
for (int i=0; i<authenticators.length; i++) {
System.out.println("### Authenticator --->"+authenticators);
if (authenticators[i] instanceof ActiveDirectoryAuthenticatorMBean)
ActiveDirectoryAuthenticatorMBean adamb =
(ActiveDirectoryAuthenticatorMBean)authenticators[i];
System.out.println("### ActiveDirectoryAuthenticatorMBean .....");
String listers = adamb.listUsers("*",0);
while(adamb.haveCurrent(listers))
System.out.println("### ActiveDirectoryAuthenticatorMBean user advancement.....");
adamb.advance(listers);
if (authenticators[i] instanceof UserPasswordEditorMBean) {
passwordEditorMBean = (UserPasswordEditorMBean) authenticators[i];
System.out.println("Auth match ...."+passwordEditorMBean);
try {
// Now we change the password
// Sar comment
System.out.println("Password changed....");
//passwordEditorMBean.changeUserPassword(username,
// currentpassword, newpassword);
changed=true;
// Sar Comment
catch (InvalidParameterException e) {
response.sendRedirect(makeErrorURL(response, "Caught exception " + e));
return;
catch (NotFoundException e) {
catch (Exception e) {
response.sendRedirect(makeErrorURL(response, "Caught exception " + e));
return;
// Sar code
LDAPAuthenticatorMBean ldapBean = null;
UserReaderMBean urMBean = null;
UserEditorMBean ueMBean = null;
GroupReaderMBean gMBean = null;
//ListerMBean lBean = null;
try
if (authenticators[i] instanceof LDAPAuthenticatorMBean)
ldapBean = (LDAPAuthenticatorMBean) authenticators[i];
String userFilter = ldapBean.getAllUsersFilter();
System.out.println("userFilter ="+userFilter);
if (authenticators[i] instanceof UserEditorMBean)
try
System.out.println("UserEditorMBean...");
ueMBean = (UserEditorMBean) authenticators[i];
System.out.println("List users..."+ueMBean);
boolean b = ueMBean.userExists("webuser");
System.out.println("User Exists->>>"+b);
String cursor = ueMBean.listUsers("webuser", 2);
System.out.println("List User ----->"+cursor);
catch(InvalidParameterException e)
response.sendRedirect(makeErrorURL(response, "ERROR InvalidParameterException:" + e));
catch(java.lang.reflect.UndeclaredThrowableException e)
response.sendRedirect(makeErrorURL(response, "ERROR UndeclaredThrowableException :" + e));
e.printStackTrace();
catch(Exception e)
response.sendRedirect(makeErrorURL(response, "ERROR LBean:" + e));
catch(Exception ex)
ex.printStackTrace();
response.sendRedirect(makeErrorURL(response, "ERROR:" + ex));
return;
if (passwordEditorMBean == null) {
response.sendRedirect(makeErrorURL(response, "Internal error: Can't get UserPasswordEditorMBean."));
return;
System.out.println("pwd changed ->"+changed);
if (!changed) {
// This happens when the current user is not known to any providers
// that implement UserPasswordEditorMBean
response.sendRedirect(makeErrorURL(response,
"No password editors know about user " + username + "."));
return;
%>
User <%= username %>'s password has been changed!
<br>
<br>
</body>
</html>
Here is the console log
User name -->webuser
Current password -->i
New password -->u
Confirm password -->u
URL -->http://localhost:7011
MBean home obtained....
Embedded LDAP Bean obtained....[Caching Stub]Proxy for mydomain:Name=mydomain,Type=EmbeddedLDAP
RealmMBean obtained....
AuthProvMBean obtained....
UserPwdEdtMBean obtained....
### Authenticator --->Security:Name=myrealmDefaultAuthenticator
Auth match ....Security:Name=myrealmDefaultAuthenticator
Password changed....
UserEditorMBean...
List users...Security:Name=myrealmDefaultAuthenticator
User Exists->>>true
java.lang.reflect.UndeclaredThrowableException
at $Proxy1.listUsers(Unknown Source)
at jsp_servlet.__updatepassword._jspService(__updatepassword.java:411)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.jav
a:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC
ontext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:37
64)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.management.MBeanException
at weblogic.management.commo.CommoModelMBean.invoke(CommoModelMBean.java:551)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.j
ava:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:365)
... 14 more
### Authenticator --->Security:Name=myrealmDefaultIdentityAsserter
pwd changed ->true
Can u pls let me know how to get all the entries from LDAP.
Thanx
Sar

Unknown User Type Error using Add-AzureAccount

Using the following code in an Azure automation runbook from the Portal (attempting to start a VM):
workflow VMStart
$Cred = Get-AutomationPSCredential –Name automationuser
Add-AzureAccount -Credential $Cred
Select-AzureSubscription -SubscriptionName "MySubscription"
Start-AzureVM -ServiceName "MyServiceName" -Name "MyVirtualMachine" -force
I get the following errors in the Output Pane:
1/15/2015 4:53:09 PM, Error: Add-AzureAccount : unknown_user_type: Unknown User Type
At VMStart:7 char:7
+
+ CategoryInfo : CloseError: (:) [Add-AzureAccount], AadAuthenticationFailedException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.AddAzureAccount
1/15/2015 4:53:10 PM, Error: Select-AzureSubscription : The subscription named 'MySubscription' cannot be found. Use Set-AzureSubscription to
initialize the subscription data.
Parameter name: name
At VMStart:9 char:9
+
+ CategoryInfo : CloseError: (:) [Select-AzureSubscription], ArgumentException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.SelectAzureSubscriptionCommand
1/15/2015 4:53:10 PM, Error: Start-AzureVM : A parameter cannot be found that matches parameter name 'force'.
At VMStart:11 char:11
+
+ CategoryInfo : InvalidArgument: (:) [Start-AzureVM], ParameterBindingException
+ FullyQualifiedErrorId :
NamedParameterNotFound,Microsoft.WindowsAzure.Commands.ServiceManagement.IaaS.StartAzureVMCommand
I can't find any information on the "Unknown User Type" error.
Any ideas?
Thanks,
Scott

Hi Joe -
I attempted to install the Azure Powershell using the instructions here:
http://azure.microsoft.com/en-us/documentation/articles/install-configure-powershell/
Upon completion I was unable to find Azure Powershell from Start/Programs:
I then attempted to re-install Azure Powershell. Initially, it came up with the error: "There was an error loading custom feed: 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml'. Error: 'ProductId PHP not found.'."
I clicked OK and WPI indicated that the Azure Powershell would be installed. I clicked INSTALL and WPI showed Azure Powershell in the list, but the Total File Download size was 0MB. I clicked I ACCEPT and it immediately blinked back that Azure
Powershell was installed.
When I clicked FINISH, however, the following was displayed:
Here is the the log file from the latest attempt:
DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9842185
DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9842185 responded with 302
DownloadManager Information: 0 : Response headers:
HTTP/1.1 302 Found
Cache-Control: private
Content-Length: 175
Content-Type: text/html; charset=utf-8
Expires: Fri, 16 Jan 2015 17:18:12 GMT
Location: https://www.microsoft.com/web/webpi/5.0/webproductlist.xml
Server: Microsoft-IIS/8.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
Date: Fri, 16 Jan 2015 17:19:11 GMT
DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webproductlist.xml responded with 304
DownloadManager Information: 0 : Response headers:
HTTP/1.1 304 Not Modified
Content-Type: text/xml
Last-Modified: Thu, 15 Jan 2015 19:17:09 GMT
ETag: "246ac1dbf730d01:0"
Cache-Control: max-age=280
Date: Fri, 16 Jan 2015 17:19:12 GMT
Connection: keep-alive
X-CCC: US
X-CID: 2
DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\1343597488.xml.temp
DownloadManager Information: 0 : Filtering by current OS
DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml
DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml responded with 304
DownloadManager Information: 0 : Response headers:
HTTP/1.1 304 Not Modified
Content-Type: text/xml
Last-Modified: Fri, 17 Oct 2014 12:44:38 GMT
ETag: "97c9cd1c8eacf1:0"
Cache-Control: max-age=296
Date: Fri, 16 Jan 2015 17:19:14 GMT
Connection: keep-alive
X-CCC: US
X-CID: 2
DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-97141593.xml.temp
DownloadManager Information: 0 : Filtering by current OS
DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-97141593.xml'
DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml
DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml responded with 304
DownloadManager Information: 0 : Response headers:
HTTP/1.1 304 Not Modified
Content-Type: text/xml
Last-Modified: Thu, 08 May 2014 18:42:31 GMT
ETag: "26a51545ed6acf1:0"
Cache-Control: max-age=372
Date: Fri, 16 Jan 2015 17:19:15 GMT
Connection: keep-alive
X-CCC: US
X-CID: 2
DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-230948881.xml.temp
DownloadManager Information: 0 : Filtering by current OS
DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-230948881.xml'
DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml
DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml responded with 304
DownloadManager Information: 0 : Response headers:
HTTP/1.1 304 Not Modified
Content-Type: text/xml
Last-Modified: Tue, 21 Oct 2014 20:26:36 GMT
ETag: "247eed4f6dedcf1:0"
Cache-Control: max-age=278
Date: Fri, 16 Jan 2015 17:19:15 GMT
Connection: keep-alive
X-CCC: US
X-CID: 2
DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1135381691.xml.temp
DownloadManager Information: 0 : Filtering by current OS
DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1135381691.xml'
DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml
DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml responded with 304
DownloadManager Information: 0 : Response headers:
HTTP/1.1 304 Not Modified
Content-Type: text/xml
Last-Modified: Thu, 08 May 2014 18:42:32 GMT
ETag: "8285645ed6acf1:0"
Cache-Control: max-age=60
Date: Fri, 16 Jan 2015 17:19:15 GMT
Connection: keep-alive
X-CCC: US
X-CID: 2
DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1877981721.xml.temp
DownloadManager Information: 0 : Filtering by current OS
DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1877981721.xml'
DownloadManager Information: 0 : Sucessfully loaded the feed 'https://go.microsoft.com/?linkid=9842185' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\1343597488.xml'
DownloadManager Information: 0 : Loading product xml from: http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml
DownloadManager Information: 0 : Content-Encoding header: 'gzip'
DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
DownloadManager Error: 0 : Error loading downloaded product file: 'System.InvalidOperationException: ProductId PHP not found.
at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)'
DownloadManager Information: 0 : Content-Encoding header: 'gzip'
DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
DownloadManager Error: 0 : Error loading feed http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml: System.InvalidOperationException: ProductId PHP not found.
at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)
at Microsoft.Web.PlatformInstaller.ProductManager.LoadExternalFile(Uri uri)
at Microsoft.Web.PlatformInstaller.ProductServiceImpl.LoadProducts(String primaryFeed, String[] feeds)
DownloadManager Information: 0 : Getting ratings file from http://go.microsoft.com/?linkid=9752395
DownloadManager Information: 0 : Contextual entry products: WindowsAzurePowerShell
DownloadManager Information: 0 : Adding product Microsoft Azure PowerShell with Microsoft Azure SDK (WindowsAzurePowershell) to cart
DownloadManager Information: 0 : Contextual navigation to product 'WindowsAzurePowershell'
DownloadManager Information: 0 : http://go.microsoft.com/?linkid=9752395 responded with 302
DownloadManager Information: 0 : Response headers:
HTTP/1.1 302 Found
Cache-Control: private
Content-Length: 203
Content-Type: text/html; charset=utf-8
Expires: Fri, 16 Jan 2015 17:18:17 GMT
Location: http://www.microsoft.com/web/handlers/WebPI.ashx?command=getatomfeedwithavgratingquery
Server: Microsoft-IIS/8.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
Date: Fri, 16 Jan 2015 17:19:16 GMT
DownloadManager Information: 0 : Content-Encoding header: 'gzip'
DownloadManager Information: 0 : Number of bytes downloaded over the internet: '22570'
DownloadManager Information: 0 : Number of bytes after possible decompression: '75392'
DownloadManager Warning: 0 : Error getting last-modified header, error code: 12150
DownloadManager Warning: 0 : HttpQueryInfoWithRetry for HTTP_QUERY_LAST_MODIFIED failed.
DownloadManager Information: 0 : Ratings file loaded successfully
DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
DownloadManager Information: 0 : Adding product 'WindowsAzurePowershell'
DownloadManager Information: 0 : Setting current install to 1
DownloadManager Information: 0 : Starting install sequence
DownloadManager Information: 0 : Starting EXE command for product 'Microsoft Azure PowerShell with Microsoft Azure SDK'. Commandline is: 'C:\Windows\system32\cmd.exe /C echo noop'. Process Id: 5308
DownloadManager Information: 0 : Install exit code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is '0'
DownloadManager Information: 0 : Install return code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is Success
DownloadManager Information: 0 : Product Microsoft Azure PowerShell with Microsoft Azure SDK done install completed
DownloadManager Information: 0 : Increasing current install to 2
DownloadManager Information: 0 : Product: WindowsAzurePowershell, Install Status: InstallCompleted-Success, Install Time: 00:00:00.0560000
DownloadManager Information: 0 : Clearing cart
I did attempt to open the regular Powershell and use the command Get-AzureVM, but the following error was returned:
The term 'Get-AzureVM' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:12
+ Get-AzureVM <<<<
+ CategoryInfo : ObjectNotFound: (Get-AzureVM:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Any advice appreciated...
Thanks,
Scott

Unable to login @ login window with Active Directory User

I successfully bound my test machine to Active Directory and can search using dscl and id. I can also su to my active directory user account an authenticate perfectly. All search bases are correct and everything else looks fine.
When I attempt to login from the login window as an AD user, the window shakes. Clicking under Mac OS X shows that "Network Accounts Available". Looks like the CLI tool "dirt" is now gone as well, although insecure it would possibly show something here.
Anyone else having issues after binding to AD? I bound using the Directory Utility gui... I have not tried using my leopard bind script yet.
Thanks,
Ken

I have pretty well the same problem. The machine was already bound to AD prior to upgrade. After could not login on with my account (jball). Can log on with other accounts from the same domain (we only have one AD domain). Can also su to jball in a terminal session. Can't access network resources with jball when I try to connect to a windows server through the finder, instantly comes up with bad username or password, doesn't even think about it.
I have removed any copies of the home folder under either /Users or /Domain as I have had problems with that before. Have repaired permissions and unbind and bind the machine to AD. Have been at this all day now and no closer. Get these error messages in console:
31/08/09 4:49:27 PM SecurityAgent[666] Could not get the user record for 'jball@domainname' from Directory Services
31/08/09 4:49:27 PM SecurityAgent[666] User info context values set for jball@domainname
31/08/09 4:49:27 PM SecurityAgent[666] unknown-user (jball@domainname) login attempt PASSED for auditing

SM04, AL08 active unknown users getting increased

Similar Messages

Maybe you are looking for