SM30 and unicode systems

After release upgrade to 5.0 I get dumps when I try to access the contents of a table in SM30.
The new system is unicode. I have heard, that SM30 does not work in unicode systems. Is that true ?
Which transaction should be used then ?

Hi
It's strange...for all tables? have you seen some note?
I know there's a flag to be setted in the attribute of the program.
Max

Similar Messages

Integrating MDMP and Unicode systems with IDoc interfaces

Hi,
We are working on integrating SAP R/3 6.20 (MDMP) with SAP PI 7.0 SP10 (Unicode) system. The source will send MATMAS or CLFMAS IDocs with Thai / Japanese characters and PI should transform and post it to SAP ECC 5.0 Target system [IDoc to IDoc scenario].
( SAP R/3 Legacy 620 - Non-Unicode / MDMP ) |----> ( XI - Unicode) -> (ECC - Unicode)
Had a look at few SAP notes (745030 ,656350 and 613389) and it looks like there is no standard way/best practice to handle this scenario.
References:
1.PDF of TECHED Session ID: IM101 Dealing with Multi-Language Garbage?Data Lessons Learned
2.SAP Note 745030 - MDMP - Unicode Interface_Solution Overview.pdf
3.MDMP_Unicode_Transfer_final.doc from SAP Note 745030
4.SAP Note 656350 - Master Data Transfer UNICODE to MDMP Systems with ALE.pdf
5.SAP Note 613389 - ALE SAP system group with Unicode systems (Solution-2)
My understanding per SAP Notes: (Please correct me if I'm wrong)
a. For MDMP integraton we can't use Standard ALE Config instead we have to use Custom Configuration (IDoc collection setting in Partner profile &Scheduling RSEOUT002/RSEOUT00_MDMP and use Function module :IDOC_INBOUND_ASYNCHRONOUS_2 ).
b. The RFC Destinations should use proper logon langauage for correct MDMP IDoc transfer (For sending IDocs with Japanese character, the logon language should be JP).
c. If we want to transfer IDocs in more than one language we need to create multiple Partner profiles/RFC destinations each with specific logon language.
Please guide us in integrating these systems if you have done a similar integrations, following are my questions:
1] Is there any configuration change required at PI layer?
2] Do we need to install codepages in PI Unicode system for all languages used or Unicode system is capable of handling all the languages?
3] Is it necessary to install any SAP Add-on package in R/3 MDMP system inorder to support MDMP to Unicode data transfer?
3] If we want to send MATMAS/CLFMAS IDoc with Thai/Japanese characters from same system, what are the changes required at the Source system?
(Source may send MATMAS/CLFMAS IDoc with either Thai/Japanese characters but not both of them in a single IDoc)
4] Can we use regualr ALE & Partner profile settings for handling multi-byte characters or we need to use IDoc collection and RSEOUT002/RSEOUT00_MDMP report for transfer?
5] Is there any restrictions on the IDoc types (MATMAS,CLFMAS etc) supported in MDMP-Unicode integration solution.
5] Is there any best practice document available for this scenario?
6] Do we need to involve SAP AG for MDMP to Unicode system integrations(As per SAP Note: 656350) ?
Thanks and Regards,
Ananth

Hi Ananth,
as you have already mentioned, you need differents RFC destinations for each language. So you have to make sure, that the IDocs use the right destination according to there content.
If you have messages from PI to MDMP it is the same, you need different channels with different logon languages as well. You need an identifier in the message, that can be used for selecting the correct channel.
It should not be a restricting to any IDoc type, but it is not possible to post a message with different languages (which require different codepages) in one IDoc.
For correct conversion from a non unicode system to unicode, the codepages have to be installed in th OS of the PI server.
Regards
Stefan

Client Copy between unicode system and non-unicode system

Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
Alexander

Hi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal

Open dataset twice once for input and once for output in unicode system

Hi All,
In a program
I used a open dataset to read the data from the file.
OPEN DATASET cmp_file FOR INPUT IN TEXT MODE
ENCODING NON-UNICODE.
Then i closed the file.
Again later in the program,
I used a open dataset to transfer the data.
OPEN DATASET cmp_file FOR OUTPUT IN TEXT MODE
ENCODING NON-UNICODE.
But this time I get sy-subrc = 8.
Unable to open the file and subsequent TRANSFER is leading to the runtime error.
Note : I am using a unicode system
I could run the same program well in non-unicode system..
->
Is it that if a file contains data already
1.I need to delete the data and open it
or
2.I need to open in APPENDING mode manadatorily...
in case of UNICODE system..
Kindly suggest..

Hi,
IF you have write permission al S.O. Level you need to check your DATASET rigths using AUTHORITY_CHECK_DATASET, this validate your rigths with S_DATASET object.
Example
TYPE-POOLS SABC.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING PROGRAM = 'ZDATASET'
ACTIVITY = SABC_ACT_READ
FILENAME = '/tmp/sapv01'
EXCEPTIONS NO_AUTHORITY = 1
ACTIVITY_UNKNOWN = 2.
See SABC type pool to know wich activities are aviable.
Hope this help.
Regards

Difference between Unicode systems and Nonunicode system

HI All ,
Kindly let me know the difference between unicode and nonunicode systems , How do we find that ?
Regards
Selvan

Unicode:In /usr/sap/<SID>/sys/exe you will find a UC folder...
Non Unicode: this directory wont be there...
Unicode allows global. access in multiple languages. Refer to http://www.sapdb.org/7.4/htmhelp/db/74d038d35e11d5994400508b6b8b11/content.htm for more details
Another way to find whether a system is unicode or not, In Menu: System->Status->Unicode system: Yes or NO

Combined upgrade and Unicode conversion for ECC5 MDMP system

Hello,
We are planning to do Upgrade and Unicode conversion of ECC5 MDMP system to ECC6 EHP4 Unicode. We are adopting Combined upgrade and Unicode conversion strategy to minimise the downtime.
In source version ECC5 we are in support pack level 6. Should we need to update the support pack to any target version to start with CU&UC or we can start with ECC5 with SP 6 itself.
Since we cant afford more downtime for support pack update also, is it ok to start with upgrade and unicode conversion with current version.
please advice.
Regards
Vinay

Hello Vinay,
please note that as a prerequisite the Basis SP should be accurate for an MDMP conversion.
There is no MUST to have the latest Basis SP, but without you could have severe issues in SPUMG.
On the application side, there are in most cases no hard requirements on the SP level.
Best regards,
Nils Buerckel
SAP AG

Line incomaptibilty betwwen RAW and CHAR data types in SAP Unicode System.

Hi Gurus,
I am working in SAP Unicode system.
We have transferred the standard programs for Non-Unicode to Unicode system.
In one standard function module, <table name> is defined in TABLES parameter as a type of TLINE structure, which has two fields - one is 132 length CHAR and other is 2 length CHAR.
In the same function module , one subroutine is being called, for which <table name> is passed.
But in the FORM of subroutine, this table is defined as a type of HLINE, which has only one field - 134 length RAW data type.
So due to confilct in data types ( CHAR and RAW ) , I am getting an error that both data types are not line compatible.
Do i need to use casting concept to remove the error.
Please suggest me the way to handle this.

hi,
declare the table as same data type.
dont go for any other types.
if you still want the form table as HLINE, then before the form call declare a varibale with TLINE data type pass the values to HLINE.
i think this will be little complex, because again it will be type incompatablity.
we can forcefully pass the values to HLINE with a class.
but i think no need, declaring with same data type might be easy.
Thanks
Vinod

Unicode and No-unicode system

Hi ,
Can i install a instace java unicode in a central instace abap no-unicode ?.
Is compatible ?
Thanks a lot

Hi Kaushal,
Kernel's are just executables, so their location makes no difference.
It is recommended to convert systems to Unicode, but not for the reasons you are saying here. When there is data communication between Unicode (sending) and non-Unicode (receiving) systems, there is always a possibility for data loss. A system can only store data using the code page that is implemented...so a non-Unicode system can receive data that it can not store (it is put in as "#" in the database). Whether Java is installed as an add-in or separate instance makes no difference whatsoever.
Best Regards,
Matt

Issue with Data flow between Unicode and Non Unicode systems

Hello,
I have scenario as below,
We have a Unicode ECC 6.0 and a UTF 7 Legacy system.
A message flow between Legacy system to ECC 6.0 system and the data is of 700 KB size.
Will there be any issue in this as one is Unicode and other is non Unicode?
Kindly let me know.
Thanks & Regards
Vivek

Hi,
To add to Mike's post...
You indicate that your legacy system is non-Unicode and the ERP system is Unicode. You also said that the data flow is only from the legacy system to the ERP system. In this case, you should have no data issues, since the Unicode system is the receiving system. There are data issues when the data flow is in the other direction: from a Unicode system to a non-Unicode system. Here, the non-Unicode system can only process characters that exist on its codepage and care must be taken from sending systems to ensure that they only send characters that are on the receiving system's codepage (as Mike says above).
Best Regards,
Matt

Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

Hi,
I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
init
2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
KERNEL.TOC'
SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
What is the Solution for the above ERROR. Please help.
Thanks,
Ajay.

> I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
> So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
> OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
> And please paste the URL of those rules that this is wrong. Since I didnt read that.
It's the first entry in every forum, it contains the "Rules of Engagement" which say:
Please do not Cross post.
Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Just imagine if everyone like you would paste questions in several forums.
Markus
Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

Unable to Open unix file in UNICODE system which created NON-UNICODE system

Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.

Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID.

Combined Upgrade and Unicode conversion of Sap 4.6C to ECC6.0

Hello all,
my project team intends to carry out a combined upgrade and unicode conversion of an SAP ERP 4.6C system with MDMP to ECC6.0 (no enhancement package). The system is running on Oracle 10.2.
In preparation for this upgrade, I have gone through the SAP notes 928729, 54801.
We need to get a rough estimate of the entire downtime so as to alert our end users. From the CU&UC documentation in 928729, I read up note 857081. However the program in this note cannot be used to estimate the downtime as my system is < SAP netweaver 6.20.
Is there any other SAP note or tool or program that I can use to estimate the downtime for the entire CU&UC? Thanks a lot!

Hi,
Combined upgrade depend upon number of factors like database size, resources on the server and optimization. In order to get idea of how much downtime, it will take, I would suggest you to do combined upgrade and unicode conversion on sandbox system which should be the replica of your production system. And try to optimize it. From there you can get approx. downtime required.
Also, please read combined upgrade and unicode conversion guides on http://service.sap.com/unicode@sap
Thanks
Sunny

GUI_DOWNLOAD problem in unicode system

Hi Guru's,
I am facing one prolem in gui_download. we are doing unicode remediation in one report. In the program one internal table declared as of type c with length 255 and data filled into the internal table by importing the data ifrom cluster. After that this internal table used by ws_download function moduel with file type as BIN to download it in word doc file. We replaced the function module with gui_download. It is working fine in non-unicode system but it is not downloading properly in the unicode system.
i am unable to find what is the cause.. I tried with different different codepages giving in run time..it is not solving my problem.
<< Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
Thanks & Regards,
Sastry R
Edited by: Rob Burbank on Dec 13, 2010 9:39 AM

Hi Clemens.
I replaced the ws_download function module with gui_download.
here is my code
Earlier before 6.0 code as follows
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 bin_filesize = data_len
 filename = p_file
 filetype = 'BIN'
 TABLES
 data_tab = data_tab
 EXCEPTIONS
 file_open_error = 1
 file_write_error = 2
 invalid_filesize = 3
 invalid_table_width = 4
 invalid_type = 5
 no_batch = 6
 unknown_error = 7
 gui_refuse_filetransfer = 8
 OTHERS = 9.
IF sy-subrc <> 0 AND no_error_dlg = space.
 MESSAGE i002(sy) WITH text-i03. "FILE OPEN ERROR
ENDIF.
Replaced above with following code
DATA:lv_fname TYPE string,
 lv_ftype(10) VALUE 'BIN',
 lv_codepage type abap_encod VALUE '4102'.
CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 bin_filesize = data_len
 filename = lv_fname
 filetype = lv_ftype
 codepage = lv_codepage
 CHANGING
 data_tab = data_tab
 EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 not_supported_by_gui = 22
 error_no_gui = 23
 OTHERS = 24.
IF sy-subrc <> 0 AND no_error_dlg = space.
 MESSAGE i002(sy) WITH text-i03. "FILE OPEN ERROR
ENDIF.
I tried with all othr code pages also like 4110/4103/1110/1100/1102. It is not working,
It is giving problem in unicode system. File is downloading.but not properly..
and when i am opening the word file it is asking me select encoding type to make document readble along with the available text encoding formats.
Please help me..
Thanks & Regards,
Sastry R

Preparing for upgrade and Unicode conversion while on 4.6c

We're currently on 4.6c and preparing to upgrade to ERP 2005 and do a Unicode conversion. I'm trying to compile a list of coding techniques that can used in 4.6c that will minimize changes needed for Unicode. Does anyone have such a list?
Some things I've discovered reading about Unicode include:
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc. This includes not moving structures/tables with non-character data to a character field or vice-versa.
3) Offsets can't cross non-character data.
4) Assign statement with offset must specify a length.
5) Open dataset must specify "FOR INPUT", "FOR OUTPUT", "FOR APPENDING", or "FOR UPDATE". It no longer defaults to FOR INPUT when omitted.
6) Many implicit conversions from char to numeric are no longer allowed. Use explicit conversion instead; such as the move statement.
I know there are others. Any help would be appreciated.
Regards,
Mark Perrey

Hai Mark
Check the following F.M Replacents
Upgrade Error Details     Suggestions
Function Module "DOCUMENT_REGISTRY_PROGRAM"not found in the target system     Suggest to replace this FM with the function module CV120_GET_APPL_FROM_REGISTRY.
Function Module "RP_HIRE+FIRE"not found in the target system     Suggest to replace this FM with the function module RP_HIRE_FIRE .
Function Module "ME_READ_HEADER_SINGLE" not found in the target system     Suggest to replace this FM with the function module ME_EKKO_SINGLE_READ.
Function Module "ME_READ_ITEM_SINGLE" not found in the target system     Suggest to replace this FM with the function module ME_EKPO_SINGLE_READ.
Function Module "RZL_ALERT_CONTROL" not found in the target system     Function Module "RZL_ALERT_CONTROL" is not available in the Enterprise Version. Suggest to use the function module "TH_SEND_ADM_MESS" to acheive the same functionality of "RZL_ALERT_CONTROL".
Function Module "MM_SELECT_ADDRESS" not found in the target system     Suggest to replace this FM with the function module MM_SELECT_PARTNER.
Function Module "MM_READ_ADDRESS" not found in the target system     Suggest to replace this FM with the function module MM_PARTNERS_FOR_MESSAGING
Function Module "ME_VALUES_T161" not found in the target system     Suggest to replace this FM with the function module HELP_VALUES_BSART.
Function Module "ME_VALUES_T024W" not found in the target system     . Suggest to replace this FM with the function module HELP_VALUES_WERKS.
Function Module "SD_PACKING_REFRESH" not found in the target system     Suggest to replace this FM with the function module HU_PACKING_REFRESH.
Function Module "SD_PACKING_RENAME" not found in the target system      Suggest to replace this FM with the function module V51P_PACKING_RENAME.
Function Module "RV_EXPORT_CONTROL_UPDATE" not found in the target system     Suggest to replace this FM with the function module RV_EXPORT_CONTROL_UPD_PREPARE.
Function Module "RV_INVOICE_COPY" not found in the target system     Suggest to replace this FM with the function module RV_SALES_DOCUMENT_COPY.
Function Module "SD_SCHEDULE_AGREEMENT_PACKING" not found in the target system     Suggest to replace this FM with the function module HU_PACKING_SALES_PROPOSAL.
Function Module "SERIAL_RENUM_WV" not found in the target system     Suggest to replace this FM with the function module IWOL_WV_SWITCH_NUMBER.
Function Module "CUD0_DISPLAY_CONFIGURATION" not found in the target system     Suggest to replace this FM with the function module VC_I_DISPLAY_CONFIGURATION.
Function Module "SD_PACKING_CREATE" not found in the target system     Suggest to replace this FM with the function module V51F_PACKING_CREATE.
Function Module "FI_ARCHIVE_CHECK_DOC" not found in the target system     Function Module FI_ARCHIVE_CHECK_DOC is not available in the Enterprise Version. Suggest to replace this FM with the function module FI_DOCUMENT_ARCH_CHECK_DOCS.
Function Module "OPEN_FI_CHECK" not found in the target system     Function Module OPEN_FI_CHECK is not available in the Enterprise Version. Suggest to replace this FM with the function module OPEN_FI_PERFORM_******_E.
Function Module "SD_PACKING_UPDATE"not found in the target system     Function Module SD_PACKING_UPDATE is not available in the Enterprise Version. Suggest to replace this FM with the function module HU_PACKING_UPDATE.
Function Module "F4_MACO" is being used in the program     Function Module "F4_MACO" is not available in the Enterprise Version. Since the Matchcode objects are not used in the Enterprise Version, Suggest to replace this FM with Search help's Value Request function module F4_SEARCH_HELP.
Function Module "SWZ_AI_RELEASE_S" is used in the program     Suggest to use the function module "SWZ_AI_RELEASE" instead of "SWZ_AI_RELEASE_S".
Function Module "SWW_WI_ORGTASK_READ" is used in the program      Suggest to replace this FM with the function module RH_WI_ORGTASK_READ.
Function Module "RH_READ_EXCEL_PATH" is being used in the program     Suggest to replace this FM with "RH_CHECK_EXCEL_SUPPORT".
Function Module "RZL_ALERT_CONTROL" is used in the program     Function Module "RZL_ALERT_CONTROL" is not available in the Enterprise Version. Suggest to use the function module "TH_SEND_ADM_MESS" to acheive the same functionality of "RZL_ALERT_CONTROL".
Function Module "CONVERT_TO_OTHER_CURRENCY" is used in the program     Suggest to ruse the function module "CONVERT_TO_LOCAL_CURRENCY" for currency conversion.
Function Module "LOAN_TABLECONTROL_SCROLLING" is not available in the Enterprise Version.      Suggest to replace this FM with the function module SCROLLING_IN_TABLE.
CALL FUNCTION 'DOWNLOAD' used in program is obsolete in target system.     "DOWNLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled methods
FILE_SAVE_DIALOG and GUI_DOWNLOAD
from class CL_GUI_FRONTEND_SERVICES.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to DOWNLOAD to the new GUI_DOWNLOAD functions."
CALL FUNCTION 'HELP_VALUES_GET_NO_DD_NAME' used in program is obsolete in target system.     "HELP_VALUES_GET_NO_DD_NAME function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the function module F4IF_INT_TABLE_VALUE_REQUEST in the target system."
CALL FUNCTION 'POPUP_TO_CONFIRM_LOSS_OF_DATA' used in program is obsolete in target system.     "POPUP_TO_CONFIRM_LOSS_OF_DATA is obsolete in the target system.
Suggest to use function module POPUP_TO_CONFIRM."
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP' used in program is obsolete in target system.     "POPUP_TO_CONFIRM_STEP is obsolete in the target system.
Suggest to use function module POPUP_TO_CONFIRM."
CALL FUNCTION 'WS_DOWNLOAD' used in program is obsolete in target system.     "WS_DOWNLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled GUI_DOWNLOAD function module.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to WS_DOWNLOAD to the new GUI_DOWNLOAD function."
CALL FUNCTION 'WS_FILENAME_GET' used in program is obsolete in target system.     "WS_FILENAME_GET function module is obsolete, and results in errors on Unicode systems.
Suggest to use FILE_OPEN_DIALOG und FILE_SAVE_DIALOG Unicode-enabled methods of the cl_gui_frontend_services class.
Note:
New applications should restart on these methods instead of the function module. The function module is extended by a Support Package so that it diverts calls to the methods without the application having to be changed."
CALL FUNCTION 'WS_UPLOAD' used in program is obsolete in target system.     "WS_UPLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled GUI_UPLOAD function module.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to WS_UPLOAD to the new GUI_UPLOAD function."
Function parameters EBENE, GRUPP, DATE_LOW, DATE_HIGH, BANKK. BUKRS, S_BUKRS, S_DISPW in function module CASH_FORECAST_TR_SELECT_ITEM is missing in the target system.     "Function Module CASH_FORECAST_TR_SELECT_ITEM is no longer used, instead it has been split based on the functionalities.
Suggest to use function module
1) CASH_FORECAST_PR_SELECT_ITEM for Payment Arrangements.
2) For TR, WP, DA use function module CASH_FORECAST_TR_ITEM_2.
The IMPORT and TABLES parameters of the above 2 function modules are almost same as CASH_FORECAST_TR_SELECT_ITEM.
The IMPORT parameter BUKRS is not available in the above 2 function modules. Hence suggest to change the coding accordingly."
Import parameter BUKRS in function CASH_FORECAST_LO_SELECT_ITEM is missing in the target system.     "Import parameter BUKRS in function CASH_FORECAST_LO_SELECT_ITEM is not available in the target system.
Also the coding in Function Module based on the parameter BUKRS has been removed, instead the TABLES parameter S_BUKRS and S_GSBER has been used.
Suggest to check the coding in the program accordingly.
Import parameter BUKRS in function CASH_FORECAST_RE_SELECT_ITEM is missing in the target system.     "Import parameter BUKRS in function CASH_FORECAST_RE_SELECT_ITEM is not available in the target system.
Also the coding in Function Module based on the parameter BUKRS has been removed, instead the TABLES parameter S_BUKRS and S_GSBER(new parameter) has been used.
Suggest to check the coding in the program accordingly.
Function Module HELP_VALUES_GET_WITH_MACO is obsolete in target system     Suggest to use F4IF_FIELD_VALUE_REQUEST
Function Module G_OBJECT_GET is obsolete in target system.     Suggest to Use G_INTERVAL_GET_NEXT
Function Module READ_COSTCENTER is obsolete in target system     Suggest to Use K_COSTCENTER_SELECT_SINGLE
Function Module K_BUSINESS_PROCESS_READ_MULTI is obsolete or not available in target system     Suggest to Use K_PROCESSES_SELECT_TAB
G_SET_AVAILABLE     Suggest to Use G_SET_GET_INFO
Function Module G_SET_DOUBLE_CHECK is obsolete or not available in target system     "DO NOT CALL THIS FUNCTION MODULE
FROM 4.0A VERSION ,THIS PROBLEM WILL NOT OCCUR"
Function Module HELP_VALUES_GET is obsolete or not available in target system     Suggest to Use F4IF_FIELD_VALUE_REQUEST
G_SELECT_SET     Suggest to Use G_SET_SELECT
Function Module G_SET_AVAILABLE is obsolete or not available in target system     Suggest to Use G_SET_GET_INFO
Function Module NAMETAB_GET is obsolete or not available in target system     Suggest to Use DDIF_FIELDINFO_GET
Function Module DD_GET_DD03P is obsolete or not available in target system     Suggest to Use DDIF_FIELDINFO_GET / DDIF_TABL_GET
CALL FUNCTION 'POPUP_TO_CONFIRM_WITH_MESSAGE' used in program is obsolete in target system.     Suggest to use function module POPUP_TO_CONFIRM.
CALL FUNCTION 'POPUP_TO_DECIDE' used in program is obsolete in target system.     Suggest to use function module POPUP_TO_CONFIRM.
Function Module HELP_VALUES_GET_WITH_TABLE is obsolete or not available in target system     Suggest to Use F4TOOL_F4FUNCTION_BRIDGE
Function Module CLPB_EXPORT is obsolete or not available in target system     "Suggest to Use Suggest to use the unicode enabled methods
CLIPBOARD_EXPORT from class CL_GUI_FRONTEND_SERVICES."
Function Module SAP_TO_ISO_MEASURE_UNIT_CODE is obsolete or not available in target system     Suggest to Use UNIT_OF_MEASURE_SAP_TO_ISO
Regards
Sreeni

GUI_DOWNLOAD problems with CR+LF when transfering from unicode system

Hi,
I was successfuly used FM GUI_DOWNLOAD in a non-unicode systems for years. Lately I faced a challenge to rewrite my code for a unicode system. The configuration is:
- SAP R/3 unicode system;
- data to be downloaded at presentation server in a non-unicode codepage (cp 9504).
I have successfuly used a GUI_DOWNLOAD-parameter CODEPAGE and the data is translated correctly when checking local file, but due to some reasons CRLF are replaced with '#' (which is default value of REPLACEMENT parameter of this function) - means at the end of each row as a result I have '##' instead of CRLF.
My question is: how can I force correct behaviour of GUI_DOWNLOAD in order to get my output file at presentation server with CR+LF?
Any help would be highly appreciated.
Many thanks in advance.
Regards,
Ivaylo Mutafchiev
SAP/ABAP consultant
VBS Ltd.
P.S. In order to find some other way to fix my problem I'm still playing with the instanciation of a CL_ABAP_CONV_OBJ and its methods create & convert, but without success for now - resulted strings are not as expected.

Hi,
in fact, I never placed CRLF in my lines before your suggestion. The rest was done by the FM 'GUI_DOWNLOAD'. It works fine even when I use unicode file as output - means I got my CRLF at the end of the record in MY OUTPUT FILE ONLY but not in my internal table - I never placed CR+LF in there.
The problem occures when I tried to use GUI_DOWNLOAD with parameter CODEPAGE = '9504' (some non-unicode codepage), and the original data (my internal table) is in unicode. Then (in my opinion) this function doesn't translate the unicoded CR+LF into non-unicode ones (if thats possible at all, I can't be sure) and the result is '##' in the output file.
I checked the value of CL_ABAP_CHAR_UTILITIES=>CR_LF by getting it in my variable - and it is '##'.
Whet should I put into this class-attribute in order to get it working in this scenario? I have no idea...
The attribute type is ABAP_CR_LF - which is char 2.
What next?
Thanks,
Ivaylo

SM30 and unicode systems

Similar Messages

Maybe you are looking for