SM30 going to dump for a Ztable whose fields I recently changed

Hi All,
Need to resolve a very urgent issue. We added a new field to a Ztable in DEV & hit the table maintenance generator with screen 8. However when I transport these changes to TS1, the SM30 transaction goes into dump with the error stating screen "009" missing.
When I created screen "0009" in DEV and retransport to Test, I still get the same error.
what can the error be here?
Thanks,
Tejas

Hello,
Once the fields of the table is changed then u need to adjust it in SE14 Tcode.
Then delete the existing Table main. and recreate it.
Vasanth

Similar Messages

I don't know what happened but for some reason my font has recently changed. It kind of looks like the font "Impact" its hard to read and getting annoying. What can I do.

Google, Twitter, StumbleUpon, and YouTube are a few site that it effects. Facebook seems to be the only thing not effected but Google is in this annoying type and what seems like everything else is too. I went to the preferences and checked with one of my friends preferences but they are both the same.

You can do a check for corrupted fonts and other font issues:
* http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html - CreativeTechs Tips: Garbled Fonts Troubleshooting Guide
* http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts

Ask to OneDrive for business developers to modify a recently changed behaviour of application (since update KB2881087)?

Hi.
Since update KB2881087, OneDrive for business application has started behaving in a problematic way. Is there a way to report/ask to OneDrive for business developers to restore old behaviour?
All problem is explained at
http://community.office365.com/en-us/f/156/p/254376/790491.aspx#790491
The problem is that before that update (win 7 64 bit ultimate edition en-US), if the startup folder link was removed, that link did not reappear (link inserted only at first folder sync). After that update, the program checks the startup folder link existence
and if not present, re-creates it. I use bitlocker in just one partition, where I put the sync folder. After that update I have to remember to delete the link every time I shut down the computer in order to avoid the OneDrive for business job deletion at next
startup when the program does not find the folder (protected into bitlocker).
I need to deploy OneDrive for business into my organization but this problem prevents this.
I would suggest to developers, as told in the office365 forum, to remove the startup check or, better, to:
- have an option to modify startup check behaviour or
- make OneDrive resilient to folder not found behaviour (if it is not found, simply pause syncing -not removing the whole job- , waiting for the folder re-appearing, very useful if using bitlocker)
Thanks,
Diegus.

Hi,
If you have any suggestions to our products, please feel free to submit Feedback in this page:
http://office.microsoft.com/en-US/suggestions.aspx
I can't guarantee whether the product will change but be assured Microsoft will always treat users' suggestions seriously, our developers strive to capture Microsoft users' ideas and are working hard to create a more powerful and easy-to-use product.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

Create tcode for the ztable

Hi all
I want to create the Tr. code for the zTable.
For this i followed this navigation.
From Se11
Given the table name
Clicked on change
Clicked on Utilities
Clicked on Table maintainence Generator
Clicked on Environment
Then It showing Transaction code in diabled mode
How i can enable?
Is it possibel to create the tcode for the table or not >
If yes, How ? Plz clarify.
Message was edited by: Prashanth Konda

Hi Prashanth,
If your purpose is to provide a T-code for entering values directly in to table without going to SE11 , create entries like that. Then What Sravathi suggested is the right approach . This is the standard approach to provide table maintenanance to the users who require it like Functional people and end users .
1.T-code SE93
2. Give the Tcode according your naming conventions.
3.choose Create then it will ask for the description
in the lower of the screen you can see 4 options select the last one .
4.In the Transaction Input box give SM30 and make a check mark in the below check box , skip intial screen.
5.In the end of the screen you can find subscreen lablled Default value
select VIEWNAME in the column NAME OF SCREEN FIELD and in the next column type your Z-TABLE.
If your requirement is to provide this T-CODE for inserting/modifying values then Type UPDATE in NAME OF SCREEN FIELD Column and the next column 'X'.
If your requirement is to just show the table then you can select SHOW .
<i>Hope This Info Helps YOU.</i>
Regards,
Raghav

Depot Sales -J1IJ while choosing excise invoice going to dump

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference.
we are facing issue in J1IJ, when we click on the Choose button (first button below select Excise invoice for delivery statement), we need to get the Excise Invoice number reference which is captured at Plant. When we tried to click on that Choose button, we are not getting any excise invoice numbers and instead itu2019s going to dump .
Dump analysis says:
Runtime Errors         SYNTAX_ERROR
Date and Time          14.09.2009 16:43:01
     Short text
          Syntax error in program "SAPMJ1IK ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPMJ1IK " in include "MJ1IKF01
           " in
          line 38:
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
          The include has been created and last changed by:
          Created by: "SAP "
          Last changed by: "SAP "
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPMJ1IK :
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
     Trigger Location of Runtime Error
         Program     ????????????????????????????????????????
Could any body help me out to come out of this issue.
Thanks&Regards
Sreekanth

Hi Sreekanth,
If this is first time you are doing look for OSS notes, Please escalate this issue to your basic and apap consultants.
R u following the following flow in case of stock transfer from mfg plant to depot plant.
PlantA:
ME21N
VL10B
VL02N
VF01
J1IIN
Plant B:
MIGO - (Goods Reciept & Excise Capture)
VA01
VL01N
J1IJ
VF01
Here at goods reciept you need to capture excise inviove same will populate when you make a sales from plant B using J1IJ transaction.
Thanks,
Swamy H P

Sales order going to dump when we enter product in the transcation

Hello Gurus,
I am facing a problem in the sales order, when i enter a product in the transcation(TA) it going to dump........It is showing the message like this.........,
What happened?......
    Error in the ABAP Application Program
    The current ABAP program "SAPLCRM_MKTTG_PF_SEL_INFOSET" had to b
     because it has come across a statement that unfortunately cannot be
     executed.
Error analysis......
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPOCMINIT'#Unable to determine host address:
      NiHostToAddr failed "
    Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1
    SAPCODE=497
     CONV= " Internal error code.... "RFC_IO5"
    There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
    Last error logged in SAP kernel
    Component............ "NI (network interface)"
    Place................ "SAP-Gateway on host IGINXMIEP / sapgw00"
    Version.............. 38
    Error code........... "-2"
    Error text........... "hostname 'iwdf7yte.wdf.sap.corp' unknown"
    Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
    System call.......... " "
    Module............... "nixxhsl.cpp"
    Line................. 223
    The error reported by the operating system is:
    Error number..... " "
    Error text....... " "
    Please provide me the solution...........its very urgent
Thanks and Regards
Chandramohan
I dont Mind to reward full points............

Hi julius,
Thanks for the reply,
The settings in the SAP Note, which you have given....they are in already in place.
Regards
Chandramohan

PPOME - Org.Unit (Acount assignment) goes into DUMP

Hello Gurus,
ive got a Big issue, concerning SAP HR module.
When we start the TC: PPOME we select org.unit from the structure.
It is beeing showed normaly, but only when we select Acount assignment it goes straight into DUMP,
saying:
Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    In the system profile, set the parameters
    -abap/heap_area_dia and
    -abap/heap_area_nondia
    to a maximum of 189714480. To be on the safe side, reduce the value by 10,000,
    000.
    Then restart the SAP system.
These corrections are not needed since the system for every other purpose (SD, MM, FI) is working, only for HR module during acount assignment is going into DUMP.
Any advice why this happens to some of the Org.Units?
Regards,
Laurynas Prikockis

Hi ,
Please check this thread might be helpful.
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Regards,
Siraj.

While drill down a char system going into dump

Hi,
We have changed 0COUNTRY as a navigation attr to the 0COMPANY and added to the Muti provider.
In query level initially for 0COMPANY data is paulating while trying to drill down 0COUNTRY with 0COMPANY then system is going into dump.
Thes system message;
The current application triggered a termination with a short dump.
An error occurred while communicating with the BI server.
As a result of this error, the system has been disconnected from the BI server.
Detailed description
can any one let me know the reason.
Regards,
Sharma.

Hi,
The problem is resolved in my self.
Regards,
Sharma

Program going to dump, when double click perform "f_form_one "

when i double click the the variable it is expected to display the database field but it is going to dump. the is the same with when we double click the perform f_form_one.
Please tell me any one how to go abt this

Hi Sirivaram,
I've never had this problem ever before, could you please specify your problem more exactly? For short dumps, pls go to ST22 for monitoring.
Thanks
Luis

What is Verizon going to do for us?

Obviously this phone has a lot of issues, everything from the phone not holding a connection, forced-closed apps, random lock-ups, reboots, etc.
The Verizon Wireless web store seems to have a lot of these phones being sold as refurbished phones so I have to ask... is this phone having that many issues? If that is the case, what is Verizon going to do for those of us that have bought this phone that has turned out to be quite a "lemon" in the eyes of the community?

I ask the same. I have been a "valued" customer since 1998, but the last 3 phones have left me ready to try AT&T.
The Blackberry Storm they sold me quickly failed, and the Verizon reps, I must say, were quick to admit it was a known problem and offer replacement. But the replacement we chose was the Samsung Fascinate.
My Fascinate slowly became completely useless...it started about 5months in with frequent freeze ups and less than average battery life. But at the end I was not receiving 8 out of roughly every 10 calls...not getting texts...it lasted about 3 hours in standby after coming off the charger.
I had called Verizon and driven to the store on more than 10 occasions. They kept telling me there were no known issues. They blamed it on everything from my charger, to an advanced task killer that had been on the phone for 8mos...installed the day I bought it by a Verizon employee! I got them in Oct. 2010, on a "buy one get one" deal. My son's was having many of the same issues.
When I finally missed an emergent call (my mom was taken to the ER) I called demanding a new phone Suddenly, Verizon knew about every issue I was complaining about! The store manager went so far as to call them "useless junk". BUT... they offered us our choice of a Droid X2, Droid Incredible, OR....the "all new 4G Samsung Droid Charge" Touted by the rep as "amazing", "lightening fast", "LTE" and "an over $600 phone", my son and I decided to go with the Charge.
My list is similar to others, and started immediately with the weird fuzzy white lines when I change screens, or especially if you take the phone away from your ear quickly and look at the screen. 4days after we got them, my son told me he didn't want it. He asked if we could please go back and get one of the Doid X models instead.
OK... a 16yr old techno guru who is already managing and creating websites for 2 companies in our area is going to give up the newest, latest "4G" technology for older "lower end" phones? PROBLEM. Apparently, his gives him an error message that all his videos and music (including videos taken with the phone and preloaded ringtones) are "not supported format" . It also forces closes apps constantly, freezes up, etc.
Mine freezes as well. My son even took a video with his phone on my screen totally locked up. Couldn't evn move the little puzzle piece or turn the phone off! The touch screen is completely useless and if I don't take the battery out, I wont get my calls while its frozen. It also:
-resets the screen brightness to the brightest setting
-creates an echo so others cant understand me
-dies so fast it's ridiculous! Charge to full, make 1 call (6min) and Im at 80% battery. I LIVE with a charger.
-alarm function is unreliable
etc...etc.
Went to Verizon ONE WEEK after getting both phones and told them what was going on. They basically said "no known issues" and too bad. I said I did not think it was an isolated "lemon" thing, since mine had been shipped to me, my son's was from the store, and both were having major issues. I asked why we couldn't get one of the other models they had offered, and was told the "promotion" was over because they had "resolved all the issues with the Fascinate.
THEN GIVE ME MY FASCINATE BACK.
Seriously, Verizon....WHAT ARE YOU GONNA DO FOR US???

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

I have an iPhone 5 from India. I am going to USA for studying. Can I use the same iPhone over there or I will have to buy a new one?

I have an iPhone 5 from India. I am going to USA for studying. Can I use the same iPhone over there or I will have to buy a new one?

If officially unlocked, you can purchase a sim from one of the two nationwide GSM carriers, AT&T or T-Mobile. However, AFAIK, none of the carriers in India offer unlocking for the iPhone. Thus, if your phone is carrier locked, the only way it will work in the US is roaming...that would cost a fortune.
So, if you have a carrier locked iPhone, leave it home or sell it before you come to the US, then purchase an officially unlocked iPhone, from Apple, when you get to the US. You'll be able to use that phone in India when you go back.

My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/

SM30 going to dump for a Ztable whose fields I recently changed

Similar Messages

Maybe you are looking for