SM30 table entries not to be transported

Hi,
I am trying to maintain entires using SM30 transaction for a Z custom table. Every time I create a new entry and save it a transport request is asked for.
Is it possible that the transport request not be asked?
Because entries a maintained by end user in each environment seperately.
Thanks in Advance,
Rohan.

Hi,
In the table maintenace genartor,
Select the radio Button , NO RECORDING ROUTINES.
This will serve the purpose.
Revrt back if any issues,
Regards,
Naveen

Similar Messages

Custom Table Entry not in Sync between Different Environment

Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
Thanks

Hello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay.

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Database table entries not getting viewed on SAP Screen

Hi
I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
Thanks
Tushar

>
Tushar Gawande wrote:
> Hi
> I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
> Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
> Thanks
> Tushar
/slap your hands
You're missing some common sense and the knowledge to be tasked to do such a thing. And the person/consultant who gave you this task as well.

How to find the Transport request for table entry

Hi ,
There was certain entry made in the SAP std table and which got transported to subsequent system. I want to find the Transport Request Number which was containign that table entry and which gor transported.
Please suggest how can I find that transport number.
Thanks
Saurabh

Hi,
Yes we can get , Basis team will help.
B'coz i had same requirement my basis got the TR for me.
Take their help.
He said u can like this.
SE11 - > Table Display - > Table Entry in Menu Bar - > Transport Entries.
Rhea.

I have one query about table entries.

i have one query about table entries.
suppose for particular table we maintained 5 entries in dev server. actaully in the dev we have only these 5 entries.
In production we have 200 entries actually.
If we move the cts from dev to production ,we will get 205 entries right
please help me in this.

If i understood correctly, It is a Z table and you have done some changes in DEV system. If you move this to Production, it wont effect the production entries.
There are 2 different ways you can trnasport a Table. 1. with Table entries 2. Without table entries.
If you transport with Table entries then the DEV entries in this case 5 will be moved to PRODUCTION totaling 205.
If you transport without table entries, then in Production you will find only 200 entries.

Transport all table entries

Hi ,
I need to transport all entries of z table from Dev to Quality.
I have tried creating a new transport request in SE10 and assigning the table data.But i dont want this.
When i am trying to transport from SM30 , I am getting message as 'Transport is not possible for the specified data'.
so what will be the settings to be maintained while creating the table.
Thankyou
Gowri
Moderator message: this has become an FAQ, please search the forum for information before asking.
locked by: Thomas Zloch on Oct 1, 2010 12:55 PM

Via transport tool (SE01/SE10) add an entry in an transport of copy transport request with the key : R3TR TABU Ztable (ignore the warnings), then add a key entry like * or <client>*
You can also
- Set the Table category to "C" Customizing table, maintenance only by cust., not SAP import (remove the first warning)
- In the maintenance dialog set the recording routine switch on standard and the compare flag to Automatically adjustable
Regards,
Raymond

Event trigger on transport of ABAP table entries

Hi Experts,
I have an issue with respect to the scenario mentioned.
Scenario is that I have a Z-table in Dev which is maintained through SM30 once the data is saved ,the event"02 After saving the data in the database" ,I have linked a include program to this event which triggers a abap proxy to send data to SAP PI Java stack cache,this scenario is used in value mapping replication from Z-table.
The problem is the QA and PRD Client has status 'not modifiable'.
So can these Z-table entries when transported to QA or PRD ,trigger an event which can call my proxy program to send the full load to the SAP PI system.
Thanks
-Alok

Hi I can try to give the information for the z-table entries to be transported to QA or Prod environment?
Ans) Yes, we can transport these Z-table entries to the the QA and Prod system environment, but the z table 'devliery and maintenance" table defines the technical attributes for this Z-table.
in the delivery and maintenance tab, you can define the deliver class. Suppose if your delivery class type is C, G, E, S: The data records of the table are copied to the target client.
Hope this information can be useful.
thanks

Transport table entries

Hi,
this one should be easy to solve.
We have a user-defined customizing table with maintenance view. In maintenance view we defined no, or user, recording routine so that users can do adjustments without transport.
For the initial distribution to a couple of systems we want to have the table entries in a transport. If I use the transport button in initial screen of SM30, message SV142 says Transport is not possible for the specified data. In maintenance, all transport-related functions are disabled.
What are the necessary steps to include the table contents into a transport?
TIA,
Regards,
Clemens

Clemens,
"no, or user, recording routine" ==> as far as I know, this prevents the transport request, you have to choose the other option (standard...), than SAP will prompt for transport request at the time of saving the entries (anyway, I will check tomorrow in the office)
one more thing: "For table key, enter * to transport all records." I think you have to add the client number at least, to avoid problems (if oyu have more clients and data is maintained in more clients on this machine)
ec
UPDATE : yes, it is because of the no, or user, recording routine ==> this prevents any automatic transport request creation.

Add table entry while client is not open

we only have access to SE16, no sm30 maintain table entry authorization, but this can be bypassed by <removed by moderator>.
thus we can modify existing table entry.
but I can't use this method to add additional table entry, any one know how to add entry using se16 debugging?
Moderator message: bypassing authorization checks is not supported in these forums.
Edited by: Thomas Zloch on May 25, 2011 12:03 PM

I can confirm those activities are checked and active.
SAP Note - 1129764 --> Users can actually see their original workbooks and the ones that have been 'saved as', they just want to be able to modify and just 'save' the original ones.
SAP Note - 1052085 --> This doesn't fit either, users have 'save' button disabled and can only click on save us. Besides we are already running on SP.14
Last note says: "Workbooks are not saved in BW systems that are not changeable.".
This is a statement that bothers me, indeed my client is set closed.
And SCC4 shows these paramenters:
Changes and Transports for client-specific Objects
 --> No changes allowed
Cross-Client Object Changes
 --> No changes to repository and cross-client customizing objs
Protection: Client copier and comparison Tool
 --> X Protection level 1: No overwriting
CATT and eCATT Restrictions
 --> eCATT and CATT not allowed
Restrictions:
(both unchecked).
Are you certain that it is possible to save them while the client is not opened? I'm starting to think that it just can't be done
Thank you for your help.
Regards,
Gonzalo

Custom table entries transportable / maintainable in production environment

Hi,
I have a custom table with table maintenance generator (automatic transport of table entries). I would also like to maintain the table entires in the production environment (i.e. using SM30 transaction, rather than transporting the entries from Quality). I hope there is a cofiguration to do this.
Could any one help me on this.
Thanks in advance.

Adding to what others have suggested, it is not advisable to give SM30 access to your users. Its better to create a parameter transaction for the maintainance dialog and give the user access to that transaction. Other way of restricting the access is using authorization group selection while creation of maintainance dialog (&NC& will give access to every one). Check the below link to see how to create a parameter transaction for sm30.
[Parameter transaction for sm30|http://www.divulgesap.com/blog.php?p=MTg=]
Cheers,
Ravikiran

New entries in table TSTC not capturing in scu3 change logs

Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
Kiran

You need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius

Transporting table entry with primary key 120 char

Hi all,
I have 2 separate questions which I feel are closely related.
In the url:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb6e446011d189700000e8322d00/content.htm
It says:....
If the key length is greater than 120, there are restrictions when transporting table entries. The key can only be specified up to a maximum of 120 places in a transport. If the key is larger than 120, table entries must be transported generically.
How do I transport the table entries "generically" for such a table?
To further illustrate my actual problem:
My problem in the real world lies with the MIMETYPES table, maintained in trx SMW0.
I select the mime types row by row and do a Table Entry > Transport Entries, but get an error that says
"Key entry for table MIMETYPES may only be generic".
As a result it fails to attach to my transport.
(Note: the primary key of MIMETYPES is 128 chars long)
The Diagnosis long text says "The key is longer than allowed by the Change and Transport System (120 characters)."
The Procedure says:
1. Make sure that you only specify the character fields before the
 first non-character key field. You must enter the key with a generic
 ending. Enter the generic symbol directly after the specified part
 of the key.
2. You must enter the generic symbol at the latest in the 120th
 character of the key. 
What is this generic symbol that i need to insert at the 120th position??
Message was edited by:
 Kevin Wong
Message was edited by:
 Kevin Wong
Message was edited by:
 Kevin Wong

Thanks Nick!
So the mysterious "generic character" is actually the asterisk (*). It works.
Strange tho as the error long text says to insert the "generic character" at the 120th character position of the key, but I found that altho I can save it, the transport still fails with the same error.
I tried placing the * right after the key value e.g.
KEY123*
and it worked.
Thanks again!

Include table entries into Transport Request manually @ SM31

Hi All,
I have an issues reg table maintenance at SM31.
We have a Z Table and I can add entries at SM31 to that table. But:
System has not asked Transport request while saving the data (after additions to the table)
Option to include in Transport Request manually is not available @ menu -> Edit -> Transport -> Include in request. Include in Request is not highlighted to select here.
Pls help me the process to add my table entries into a Transport Request.
Thank you
Chandu

Hi,
seems like your table is defined as Application table (master and transaction data).
Check SE11 to be sure
Database table: enter name > Display > Delivery & Maintenance
Delivery Class > is this A?
If so then there is no transport and it can be maintained in all systems.
You could try if required to create manual transport via SE01.
Programm ID: R3TR
Object: TDAT
Objectname: your table name
Regards
Hein

Function module to find table entries associated with transport request

Hi all,
 I have requirement, like we have created a table and maintenance view for that table - and made entries in that table.
 now we want to know all the entries made in the table are associated with transport request or not.
how to do it programmatically?? is there any function module which gives the result for transport object associated with the table entries ?????
Thanks
Sathish

Hi,
Use the table E071K
in se16 give :
request number in TRKORR
Table name in OBJNAME
in the filed TABKEY u will get the values of the key fields in the table
by comparing the key fields u can find out the enrties related to the request number
Please let me know if i am not clear
---Patil
Message was edited by:
 Santhosh Patil
null

SM30 table entries not to be transported

Similar Messages

Maybe you are looking for