SM36 job --- next  job should start after the completion of before job

Hi All,
I have a job which is running hourly . My requirement next  job should start after the completion of before job .
forexample :
It will run evenry hour like ,---  8 am,9 am,10 ,11 etc..
My requirement
9am job should  start after completion of 8 am job ...  Can you please let me know ... How can i achieve this thru SM36.
Thanks,
Tashvi

Hi Tashvi,
Start Criteria :
From the initial define background job screen, click on the u2018Start dateu2019 pushbutton to indicate the start criteria for the background job. The options available for scheduling jobs are:
Immediate - allows you to start a job immediately.
Date/Time - allows you to start a job at a specific date/time.
After Job - allows you to start a job provided that another job has completed.
After Event - allows you to specify the event when you want your job to run.
At Operation Mode - allows you to start a job when the system switches to a particular operation mode.
Scheduling Job after another Job :
The u2018After Jobu2019 pushbutton allows you to start a job provided that another job has been completed. With this option, you must specify the name of the job that must be completed for the current job to run. If the u201CStart status-dependentu201D option is checked, the current job will only run if the specified job ends successfully. This option is useful in cases where the current job depends on the outcome of the specified job.
Hope this Helps.
Regards,
Chandravadan

Similar Messages

  • Start date should be after the dd.mm.yyyy or later error message.

    We have recently applied HR support packs 46 to 51 and now when updating Personal Data (IT0002), Bank Details (IT0009) or Addresses (IT0006), the following error message is displayed 'Start date should be after the 07.02.2010 or later'. Where the screens allow for a future date to be entered we have done so, but the same error message appears.
    Has anyone encountered this problem after apply support packs?
    Jason

    Hi,
    Check what is the date maintained in table V_T569R.
    With Reagrds
    Shyam V

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Itunes just won't start after the upgrade

    I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • My I Pad is not charging, it started after the battery went dead while i was playing a game, when i tried charging it all it does is flash the apple icon and it switches off again, help Pliiz

    my Ipad is not charging, it started after the battery died while i was playing a game, when i tried charging its only flashing the apple icon and it switches off again, help PLIIZ

    Not charging
    1. Reset iPad
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?

    When I started my iMac today, it started beeping like an alarm horn.  I shut it down, and held the startup button a little longer to get it to start.  Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?  Am I screwed?  HELP!!

    What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and  keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
    It will take noticeably longer than normal to start.

  • What has happened to earphone volume and microphone on 4S? Problem started after the 7.0.6. Update

    What has happened to earphone volume and microphone on 4S? Problem started after the 7.0.6. Update. Is there a solution to this?

    Today i switched OFF  functions: Settings-Cellular; Cellular data and Enable 3G and switched it back ON again, after doing this, my phone started working normally again. I would assume it had something to do with network service....!?

  • My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

    Hi,
    My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
    Expecting some quick solution in this regard,
    Thanks
    Prabhu

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Why does installation not start after the message "setup wants to make changes"?

    Why does installation not start after the message "Setup wants to make changes.  Type your password to allow this"?

    Hi
    It wants your system's admin password. Standard procedure on Mac for non-admin users
    Thanks

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

    Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

    Lots of Frustration.  In some cases the LGG2 is rendered useless even as a phone.
    Here is what I did.
    Got replacement Phone.
    Same problems but I shut down all apps that I purchased even though they worked before KitKat.
    Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
    Then I got 2 CM free utilities.  The Clean and Wash utilities. Run them and find the culprits grinding CPU
    cycles and running down the battery.  Number One is the Verizon Voice Mail service constantly turning on and off
    and retrieving data not there.  Turn of the extra Voice mail and use the old access with the *6.  Unless you have
    100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
    YOU can see the battery suckers and shut them down when not using automatically.
    Start putting back one application at a time you used often and see it they work and if the utilities will tune them
    down if they cause problems.  The LG will get better but with some limitations.
    LG and Verizon have a problem with what was a great phone.turned bad overnight.
    whatmorecanyousay

  • Triggering a report after the completion of processing the session

    Hi Friends,
    I want to know how to trigger an report after the completion of processing the session.
    Thanks,
    Raj

    Hi
            SELECTION-SCREEN                               *
    PARAMETERS: p_name     LIKE apqi-groupid,
                p_datum    LIKE apqi-credate,
                p_time     LIKE apqi-cretime,
                p_event    LIKE tbtco-eventid.
                 DATA                                     *
    DATA: fl_job_ok TYPE c,
          fl_event TYPE c,
          cont_sysubrc_6 TYPE i.
    DATA: start_time LIKE sy-uzeit,
          start_date LIKE sy-datum,
          time       LIKE sy-uzeit,
          delta_time TYPE i.
    DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
    DATA:
      btc_running       LIKE tbtco-status VALUE 'R',
      btc_ready         LIKE tbtco-status VALUE 'Y',
      btc_scheduled     LIKE tbtco-status VALUE 'P',
      btc_released      LIKE tbtco-status VALUE 'S',
      btc_aborted       LIKE tbtco-status VALUE 'A',
      btc_finished      LIKE tbtco-status VALUE 'F',
      btc_put_active    LIKE tbtco-status VALUE 'Z',
      btc_unknown_state LIKE tbtco-status VALUE 'X'.
                         START-OF-SELECTION                              *
    START-OF-SELECTION.
      DATA: a VALUE '1', b.
    Controllo esistenza job:
      start_time = sy-uzeit.
      start_date = sy-datum.
      DO.
        apqitab-creator = sy-uname.
        CALL FUNCTION 'BDC_OBJECT_SELECT'
          EXPORTING
            name                   =  p_name
            datatype               = 'BDC'
        CLIENT                 = SY-MANDT
            date_from              = p_datum
        DATE_TO                =
            time_from              = p_time
        TIME_TO                =
           QSTATE                 = 'F'
            session_creator        = apqitab-creator
          TABLES
            apqitab                = apqitab
          EXCEPTIONS
            invalid_datatype       = 1
            OTHERS                 = 2.
        IF sy-subrc <> 0.
          fl_job_ok = space.
        ELSE.
          LOOP AT apqitab.
            CASE apqitab-qstate.
              WHEN 'F'.          fl_job_ok = 'X'. EXIT.
              WHEN 'E'.          fl_job_ok = 'E'. EXIT.
              WHEN OTHERS.       fl_job_ok = space.
            ENDCASE.
          ENDLOOP.
          IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
            EXIT.
          ENDIF.
        ENDIF.
        IF start_date <> sy-datum.
          start_time = sy-uzeit.
        ENDIF.
        time = sy-uzeit.
        delta_time = time - start_time.
        IF delta_time > 1800.
          EXIT.
        ENDIF.
        REFRESH apqitab.
      ENDDO.
      IF fl_job_ok = 'X'. " Trovato JOB
        fl_event = 'X'.
        IF fl_event = 'X'.
    Attiva evento
          CALL FUNCTION 'BP_EVENT_RAISE'
            EXPORTING
              eventid                = p_event
            EXCEPTIONS
              bad_eventid            = 1
              eventid_does_not_exist = 2
              eventid_missing        = 3
              raise_failed           = 4
              OTHERS                 = 5.
          IF sy-subrc <> 0.
            MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
          ELSE.
            MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
          ENDIF.
        ELSE.
          MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
        ENDIF.
      ELSE.
        IF fl_job_ok = space.
          MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
        ELSE.
          MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
        ENDIF.
      ENDIF.
    Max

  • To trigger the same Gp process once again after the completion of one

    Hi
    I have aGP process implemented in Webdynpro.
    After the completion of this process, itshould automatically trigger the same GP process once again.
    It should happen from the webdynpro coding.
    Can anybody help me.
    thnaks
    Smitha

    Hi Siva,
    Thanks for the reply.
    But How can I give process name ?
    There can be more than 1 process with the same name.
    Procees ID is the unique one what we can use.
    Still that too we can't use as method.
    we can give it as a parameter.
    what I tried is,
    IWDClientUser wdUser = WDClientUser.getCurrentUser();
    IUser user1 = wdUser.getSAPUser();
    IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user1);
    IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate("EB0B28E08B6011DBB1BE00145EB416E0",userContext);
    EB0B28E08B6011DBB1BE00145EB416E0 is the process ID.
    This code I have tried by  giving before and after the completion of the previous  process(process9executionContext.processingComplete();)
    And I tried URL navigation also, by creating an outbound plug in the interfaceview. in the outbound plug I have called the process instantiation URL. But it is giving the error: "can not navigte :non-existent outbound plug"
    Please help me out.
    Thanks
    smitha

Maybe you are looking for