SM37 - Add a new step job to an existing Job

I have created step job in SM37, Is there any way to add a new step job to this existing job.?

Hi,
You can do thru SM37 itself only...
Selct job name>change mode>Step >create step..
this is the way you can add as many steps for that job..
Kuber

Similar Messages

  • Can I add new job in the existing Job

    Hi Gurus,
    There is a job which loads data from 4 ODS to respective Infocubes. Now we are adding new infocube and new ODS to the existing layout so can we add 1 more job which loads data from that ODS to corresponding Infocube. If so how??? Can u give me detailed steps to add new job in the existing job...
    Thanks in advance

    is the previous loads done through a job or a process chains???
    Go to RSPC > check what process chains are there and in case if you find one > log you will see when it was last run and stuff.
    But if it is a job in SM37, it is a different story, u might have to create a variant of that job and create events to trigger the job in sequence depending on ur scenario..
    give more details. like when is that job triggered, if any events used.

  • Cannot add a new SHIP_TO address to a exist customer by using Interface

    Hi,
    I am encountered an error when i am using Customer Import Interface to add a new SHIP_TO address to a exist customer,
    the template format of the Excel i used like below: <will insert to table: ra_customers_interface_all>
    Customer Num. | Customer Name | Site Name | Address | Site Use Code | ... ...
    1 | oracle | AA | address1 | BILL_TO |... ...
    1 | oracle | AA | address1 | SHIP_TO |... ...
    1 | oracle | AB | address2 | SHIP_TO |... ...
    I am able to import top 2 rows correctly, as those 2 sites with same Site Name AA;one is BILL_TO site and another one is SHIP_TO address; I tested for few customers, it can run correncty if the BILL_TO address and SHIP_TO address are same.
    But when running import for the third row to add another SHIP_TO address<AB&address2> to the exist customer<1&oracle>,the error raised, it gave error message like below:
    The Customer Number has been used by another customer,import failed !
    I am not too clear about this error,i just want to add a SHIP_TO address to the exist customer<1&oracle> and don't want to create a new customer.
    what should i pay attention to? please give me some tips,,,,,,
    Thanks a lot...
    Rock Lei

    Did you ever get a response or resolution? I have the same issue. Did you get a fix for this? If so, could you share?
    Thanks

  • How do you create a custom button in LiveCycle to add a new form page to an existing form?

    Can someone tell me how to create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

    Hi,
    You can use addInstance method to achieve your requiremnets.
    form1.#subform[1].instanceManager.addInstance()
    BR,
    Paul Butenko

  • How do you create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

    Can someone tell me how to create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

    In Acrobat forms you can use the 'template' object's 'spawn' metod. A Lesson in Templates for Adobe Acrobat by Dave Wrigtht

  • Create job and modify existing jobs in OM

    Dear all
    how to create job and modify existing jobs in OM?
    thanks
    Jeeva

    […] (as I understand it), pdf's are not a viable solution as these print jobs feature a very high resolution (1200 dpi).
    I would expect the output from Finale to be mostly in the form of font characters—so a PDF you create by printing-to-file should be resolution-independent. If you have +Adobe Acrobat+, that can be verified quite easily in Document Properties, which will list all embedded fonts, but you should also be able to tell by zooming ’way in with Preview: if the score still looks sharp when greatly enlarged (and the file takes up less than a few hundred kilobytes per page), you can be sure it will print well on any suitable device. (If you print-to-file as PostScript instead of PDF, the resulting document can be downloaded directly into any PS printer, but it will likely be several times larger than a PDF version.)

  • How do i add a new page to my already existing pages template document?

    help i'm really confused and in a hurry! I am working on something using a template, but it doesn't have enough pages, but i can't add a new one.

    whoops sorry figured it out thanks!

  • How do I add a new song to an already existing playlist on the new iso7 for iPhone 5?

    I tried to add a new song and I go to playlist, edit and go to song to add and it won't. So confused!

    This should come handy:
    http://docs.info.apple.com/article.html?artnum=107240

  • How to add a new Spread file to the existing one IDML?

    I'd to know how add new spread in IDML file exists.
    In the file designmap.xml, I put and changed somethings:
    1) I put some tags; the tags are:
      <idPkg:Story src="Stories/Story_u1fc.xml"/>
      <idPkg:Spread src="Spreads/Spread_d467.xml"/>
    2) I also added the attribute StoryList which values u1fc.
    In addition to this,The StoryList attribute belongs to element Document.
    3) And I changed the attribute Length of element Section, to 5, which was 3; because my new spread have 2 pages.
    In IDML file final, have files in each folder, but when I open the file in InDesign IDML, it does not open .... crashes the application.
    what should I do?
    Thanks

    Hello Diego
    The SAP GLOBAL 2.0 should be downloaded from the Service marketplace. Follow the URL : [http://service.sap.com/swdc|http://service.sap.com/swdc] and search for SAP GLOBAL.
    You will find the following SWCV - XI CONTENT SAPGLOBAL 2.0. If you have relevant access, you can download the same as a .tpz file and then import it into your ESR.
    Hope it clarifies things.
    regards
    Rathish

  • How do you add a new ipod touch to an existing library?

    How do you add a new device, an ipod touch to an existing library? The computer isn't recognizing therefore new device.

    Open itunes, connect ipod, select what you want to sync, sync.

  • How to add a new pattern to a pre-existing pattern set?

    Hi all,
    Well, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... you get the idea. But I can't find this info anywhere. I'm sure the amazing experts here can help!

    There's ALWAYS more to learn about PS. I read more about the PM... and adding a new pattern and then saving worked perfectly. Okay, here's ANOTHER question... what if you want to move a pattern from one set to another? Case in point: if I saved a swatch that looked like a solid color to "Plain Pattern Set", looked at it more closely, and saw a subtle design. Okay, so this should go in "Subtle Design Set." Could I just open SDS and save the new pattern there, and then delete it in PPS? Or would that have some kind of weird effect?
    I'm kind of scared to try it in case something gets permanently deleted... At this point, I don't think it would make much difference if it did.  But once these libraries get to be a lot bigger and the original image the pattern was made from might have gotten lost, it would not be good.

  • Add a new textbox without aligning to existing textboxes

    How do I disable the column alignment feature for a new textbox?

    You cannot disable the alignment of fields to the left margin.  You can add fields to the right of a text field and adjust thier width to you liking.
    -Jeff

  • My bookmarks are not only gone, I cannot add a new one or import my existing ones from presaved files. I have checked my profiles and I have only the default one.

    My bookmarks disappeared just before I left for Christmas. Not having time to deal with it then, I found a copy of html bookmarks that seemed to be current and made a copy of it. This copy starts up Firefox and opens in a window. I can use it to get to my sites. However I cannot import it to my bookmarks. I also cannot add a bookmark in real time. Using your forum, I decided to add the plug-in Torbutton. It did not help and something keeps turning it off. I even tried to import my old IE bookmarks since they have not changed a lot. Everything acts like it has worked but nothing shows up.

    No, I see the three areas at the bottom of the Bookmark area that you refer to, but that also highlights an issue.  When I want to save a story to my Reading List and click on Share then "Add to Reading List" then go back to look at what is stored in the Reading List, my recently-saved item is not there.
    I looked thru the History tab and the Reading List tab and have been in the Bookmark tab.  But even when I Save a Bookmark, that newly-saved Bookmark does not show up in the Bookmark area.
    But then again, the next day (and actually just in the last half-hour) all of the functionality came back.  When I look at the Bookmarks, suddenly, again, all of the Bookmarks that are on my Safari browser on my iMac are now there, and I can now Save a Bookmark.
    It keeps coming in and out and that is what is driving me a little nuts.
    Thanks.

  • InDesign CS3: How do i add a new text frame to an existing threaded story?

    I have a table that is much too large to be in an existing story (my document is currently formatted in 2 columns, but the table that I need to insert needs to span across an entire page) so I had to create a separate text frame for it. What I need to do is break the text thread and reroute the story so that the table is included. Is there a way to do this?

    With the selection tool click the outport of the frame you want before the table, then the inport of the frame that should have the table, then the outport of that frame and the inport of the one that should follow.
    You'll need to put the table into a separate paragraph, and that paragraph should be set to start in a new frame, as should the one that follows (you can also accomplish the frame transitions by inserting frame breaks).
    Peter

  • How do I add a new track to an already existing CD-R?

    I want to be able to purchase tunes over an extended time period. I want to create a cd-r by adding tracks at different times. How may I do this without reformatting the cd and reburning the entire list?
    dell dimension3000   Windows XP  

    This should come handy:
    http://docs.info.apple.com/article.html?artnum=107240

Maybe you are looking for

  • How do I get rid of the new version that will not permit me to choose my search engine?

    I just want my old version that functions properly back. I can no longer choose search engines. Can't search Amazon or Ebay. Don't want to install work arounds on my computer.

  • DAC add to w_day_d dimension

    Well it seems time is running out on the date dimensions. The max day is on 12/30/2010, so how to extend the dates to 2015 on all date dimensions using DAC? thanks for the help!1

  • The worst macook on the planet.

    Seriously. I know I must be the one to own it. But on to my issue, When I start up I get the perpetual gray loading screen. It loads for 5 minutes, 10 minutes, 3 hours, and NEVER goes past it. Before this my computer was experiencing a slowdown. Appl

  • Query for batch number

    Hi i want query that suppose i create 'i01' item make management method by batch. when i create ap invoce at that time i add vendor refrence number add add that 'i01' item with '5' quantity's then add. at that time it ask for batch update. then i get

  • IDVD movie stops short

    My idvd movie dvd's run around 25-28 minutes out of 38 and locks up for about a  minute, then goes back to the start menu.  This was a Final Cut Express video exported  out with quicktime movie to the desktop.  It plays through all the way through wi