SM37: job sends message even when report list is empty

Dear gurus,
I run job over transaction VD59 - the result of this report is sent to recepient via email. Even when VD59 gives no results (no rows), recepient receives empty message.
Can I somehow set that in the case of empty result list job sends no message?
Pavel

Hi,
       Try to use these FM's.
       BP_JOBLOG_READ
       BP_JOBLOG_SHOW
       BP_JOB_CHECKSTATE
       BP_JOB_CHECKSTATE_SM37B
       BP_JOB_READ
       BP_JOB_STATUS_GET

Similar Messages

TS3274 iMessage not working since upgrade. Won't send messages even when on wifi

I am no longer able to send iMessages since I upgraded to ios7.

Hello, RicardoSwe.
Thank you for visiting Apple Support Communities.
I see you have tried some troubleshooting steps already. There are a couple more steps that I would recommend trying in the article below.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Jason H.

Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
Clearly state the Troubleshooting Steps you have tried to Resolve it

I keep getting "startup disk full" message even when I already moved all my files/documents to an external hard disk

Dear all,
What should I do? I keep getting the "startup disk full" message even when I already moved all my files and documents to an external hard disk.
Thanks a heap.

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

HT4060 Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It just seems to be exceedingly f

Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?

Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Swipe left is deleting mail messages even when swipe is disabled

Swipe left is deleting mail messages even when swipe is disabled. I had it set to "Flag", but it was still deleting them so I tried disabling it.
It does this only with my Exchange account, not other mail accounts. Running iOS 8.1, but it did it with 8.0, 8.02 as well.
Anyone else experiencing this? any fixes?

Thanks, that got me on the right track. Searched a little more and changed the end to:
tell application "Mail"
(* do stuff *)
          set theSelection to selection
          set theMessage to item 1 of theSelection
          set theAccount to account of mailbox of theMessage
     set mailbox of theMessage to mailbox "Trash" of theAccount
end tell
And that seems to work.

IPhone won't send iMessage (even when signed on Wi-FI or 3G)

My iPhone won't send iMessages even when I try to connect through Wi-Fi or 3G. At first I thought it was my Wi-Fi but it wasn't since I can connect to programs such as Safari and Instagram. I have also reset my network settings. Can someone help me or have any idea how I can fix this?
Thank you!

Phone is not jailbroken.
Got it re: passcode lock.
If I do a system restore, but I restore as a new phone, will my crucial phone functionality remain intact (phone number, ability to make calls, etc.)? And when it's restored, do I then just do a sync to have all my data brought back into the device?
Sync settings for calendar and contacts are enabled properly, and are the same as they have been for years. I'm not sure it's the calendar or contact data that is corrupted (although anything is possible) because the sync problems started happening exactly when the iMessage problems started happening.
Please advise on the system restore (not from backup) and I will post my results. Just wanna make sure I'm not doing anything irreparable.
Thanks...DG

HT2101 Anyone else get the "iPod too hot" message, even when the device and ambient temp are both cool?

My iPod Touch 4 repeatedly gets the iPod too hot message, even when the device and ambient temp are both cool. Shuts itself off. Ugh!
Is this a warranty issue or is there a fix?

LED Cinema Display
24-inch, Late 2008 (1344 x 840)
AMD Radeon HD 6750M 512 MB graphics
Specifications
Â Model number: A1267
Â Resolution: 1920 x 1200 @ 60 Hz
Â Ports: Three USB 2.0 ports on the back
Â Camera and microphone: Built-in iSight camera with microphone Â Speakers: Built-in 2.1 speakers with 12 W output
Dimensions:
Â Weight: 20.92 lb. (9.49 kg)
Â Height: 18.84 inches (478.38 mm)
Â Width: 22.57 inches (573.22 mm)
Â Depth (with stand): 7.76 inches (197.10 mm) Â Viewable: 24 inches (609.60 mm) diagonal
Operating environment:
Â Operating temperature: 50° to 95° F (10° to 35° C) Â Relative humidity: 20% to 80% (noncondensing) Â Altitude: 0 to 10,000 feet (0 to 3048 meters)

Send message failure when Messages beta is installed

Did you know that in some cases, iMessage on your phone will have send message failures on both sides of the conversation when Messages beta is installed on your Mac? Messages doesn't even need to be running. As long as you have it installed and your computer is running, you'll get the send message failures. Happens to myself and two friends. Just tested this myself.

Hi,
Can you detail how this is repeatable ?
8:21 PM Sunday; March 18, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do i stop my iphone from sending sms even when the option is switched off

Hi, i would love it if someone could help me out please, i have a iphone 4 and my friend also has a iphone but who lives in america for the time being, now we have been imessaging eachother but sometimes the imessage turns into a normal message even though my sms is turned off because i dont want it to cost when i send a text, how do i stop my message from sending when it sends as a normal text even though my sms is turned off, please help, thank you

What troubleshooting steps have you tried so far?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

'Load Paper' error message even when paper is loaded in the front load tray

Load Paper Error message -
Printer type: HP OfficeJet 6500 Wireless All-in-One Printer
(possibly other HP printers as well)
This 'How-To' article will help you solve a 'Load Paper' error message even though there is paper in the front load tray. You can read this helpful article at http://mikeyates.com/wordpress/?cat=187
This could also help other HP printers with no easy access to the drop down type rollers located inside the printer.
Would appreciate any feedback if this worked for you or not.
Thanks
Mike

This is what I found: printer eventually wants to see color ink after running months without. Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean. Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point. Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error. Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure. (which you can get aroung by keep hitting OK and cancelling the alignment)! This totally cured by problem of load paper and alignment failure. Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

TS5185 iMessage does not send message, but when I turn if off, then I can text? what is wrong with my Iphone 4S?

My Iphone 4 is not sending Imessage, but when I turn it off, I can text? What can I do to fix my phone?

iMessage is separate from texting - SMS/MMS.
http://support.apple.com/kb/ts2755

IP/IVR 4.5 CRS Client Editor Error message Engine host name list is empty

When the reactive script is being clicked on the client
version of CRS editor it is returning an error "Engine host name list is
empty check the LDAP enabled CRS for engines" in the debugging pane ,But i
dont face any issues when i'm doing the same on the server. KIndly help me
out to fix this issue
note : version of ipivr is 4.5 and i am facing this issue when i execute on the client machine and i have attached a screen shot along with this

Thanks for the response.
1 . I am able to ping the crs server from the client machine by host anme as well as it's ip address.
2. yes i am able to ping the client from the server
3. i get the same error message when using IP address to log into the CRS Editor.
note :
1. i face the same issue when i try it out on another client on the same network
2. since i was facing this issue i tried to install the SR2 and check it out but still i am facing the same issue
3. there is no firewall in the CRS server or in the client machine where the CRS editor is installed

HT3529 I send messages but the receiver is sent empty texts

My mum send messages to her contacts and all but one doesn't receive the message and the one who doesn't receive the message is using an iphone 4 and she uses an iphone 5

Is she usign emoji? If so, see what happens if she doesn't.

SM37: job sends message even when report list is empty

Similar Messages

Maybe you are looking for