Sm37 jobs

Hi all,
We can monitor r cancel a background job through SM37.
then how to identify the jobs scheduled in foreground
any ideas please.
thanks and regards
Harish

hi dinesh,
thanks for the info, so how to recognize the job and which process is runing that job. Because we have different names for example if i am filling setup tables how to recognize the process which is doing this.
thanks and regards
Harish

Similar Messages

  • Report to do check status of sm37 jobs

    Hello,
    I wold like to create a job that checks the status of all running jobs on sm37 (the same as when we go to SM37,job, check status), can anyone tell me the name of the program that does that?
    Thanks,
    Pedro

    Hi,
    Good Day,
    TRY SM50 Transaction.  Program Name : RSMON000_ALV.
    Best Regards,
    Suresh Kumar K
    Assign Points if its useful.

  • SM37 Job  in BW

    Hi
       How to cancel or put on hold a Released/Scheduled SM37 Job in BW
    Thanks

    Hi,
    Please go to SM37 and select the job and click on Job Details and copy the PID and note down the application Server where it is running and go back to the Job Overview screen and Click on Application Server at the right top corner and double click on the Corresponding server and it will take you to the SM50 Screen where you can give a search for the PID(Delete the Dot and Search). once you found the PID click on Process Menu and Select the option Cancel Without Core.
    Regards,
    Syed

  • SM37 Job schedule in BW

    Hi,
        I had a 2 SM37 Jobs in BW.
        for the next 3 Weeks my requirment is to schedule One Job to run from MON-WEd and Another jon to run THu-SAT
    How can i schedule/release a job in SM37 and meet my requirment

    hi friends..
    your solution might be correct, but we need to create 3 jobs with different timings (MON, TUE, WED) and same for the second also then the number of jobs created are 6, here time is wasted i think so.
    so i have one small idea, i hope it works.
    make a FACTORY CALENDAR such with MON, TUE, WED as working days and while scheduling the job use that factory calendar. and create one more FACTORY CALENDAR with THU, SAT as working days and us it for scheduling the second job.
    hope it works.
    Edited by: ahamad4sap on Aug 23, 2010 11:30 PM

  • SM37 - JOBs was CANCELED

    Hello all,
    Can someone explain why Job was Canceled...
    tx = SM37 - JOBs were CANCELED
    Some JOBS were finished ans some were canceled:
    name: DELIVERY_APR / user: JHERNANS/ stts: COMPLETED/ date: 06.06.2007/start: 01:00:32/ finished: 07:26:17
    name: DELIVERY_JUN  / user: JHERNANS/ stts: CANCELED/ date: 06.06.2007/start: 01:00:36 /finished: 01:03:56/
    name: DELIVERY_MAR  / user: JHERNANS/ status: CANCELED/ date: 06.06.2007/ start: 01:00:32
    name: TS MAY NAT/ user: JHERNANS/ status: CANCELED/ date: 06.06.2007/ start: 01:00:36
    All JOBS above has just 1 STEP which is:
    ABAP program: AQIWGM==========TS============
    However each JOB has a different VARIANT(PARAMETER):
    job: DELIVERY_APR / parameter: &0000000004820
    job: DELIVERY_JUN / parameter: &0000000004885
    job: DELIVERY_MAR / parameter: &0000000004801
    job: TS MAY NAT / parameter: &0000000004856
    ALL CANCELEDS JOBS were canceled because :
    ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    All CANCELED JOBS has the same at Job Log:
    - ABAP/4 processor: DBIF_RSQL_SQL_ERROR/ message class: 00/ message nº: 671/ message type: A
    - Job cancelled/ message class: 00/ message nº: 518/ message type: A
    Question: What has happened?
    Is a time overlapping problem
    Or
    Can it be a program problem?
    In Source Code Extract from the dump message there is:
    002400 START-OF-SELECTION.
    002410 perform init_texthandling(rsaqexce) using 'CL_TEXT_IDENTIFIER' ' ' 'ZSTE
    002420 data: %ret type i.
    002430 if sy-batch is initial and %excel is not initial.
    002440 perform check_wingui(rsaqsyst) using %ret.
    002450 if %ret <> 0.002460         message e842(aq).
    002470       endif.
    002480     endif.
    002490   perform authority_begin(rsaqexce).
    002500   perform authority(rsaqexce) using 'LIPS'.
    002510   perform authority(rsaqexce) using 'VBUP'.
    002520   perform authority(rsaqexce) using 'VBAP'.
    002530   perform authority(rsaqexce) using 'LIKP'.
    002540   perform authority(rsaqexce) using 'VBAK'.
    002550   perform authority(rsaqexce) using 'KNA1'.
    002560   perform authority_end(rsaqexce).
    +002570   perform %comp_ldesc.
      select LIPSLFIMG LIPSLGORT LIPSPOSNR LIPSVBELN LIPSVGBEL LIPSVGPOS
    002590          VBUP~WBSTA
    002600   into (LIPS-LFIMG , LIPS-LGORT , LIPS-POSNR , LIPS-VBELN , LIPS-VGBEL , L
    002610        , VBUP-POSNR , VBUP-VBELN , VBUP-WBSTA )
    002620   from ( LIPS
    002630          inner join VBUP
    002640          on VBUPPOSNR = LIPSPOSNR
    002650          and VBUPVBELN = LIPSVBELN )
    002660          where LIPS~LFIMG in SP$00020
    002670            and LIPS~LGORT in SP$00005
    002680            and LIPS~VBELN in SP$00018
    002690            and LIPS~VGBEL in SP$00022
    002700            and LIPS~WERKS in SP$00017
    002710            and VBUP~KOSTA in SP$00014.
    002720            and VBUP~WBSTA in SP$00012.
    002730     %dbacc = %dbacc – 1.+002740     if %dbacc = 0.
    002750       stop.
    002760     endif.
    002770     check SP$00020.                                                                               
    LOOKING MORE the DUMP SCREEN:
    Runtime errors DBIF_RSQL_SQL_ERROR
    Exception CX_SY_OPEN_SQL_DB
    Occurred on 06.06.2007 at 01:03:56
    An SQL error occurred when accessing a table.
    What happened?
    What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
    Error analysis
    An exception occurred. This exception will be dealt with in more detail below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not caught, which led to a runtime error. The reason for this exception is:
    How to correct the error
    Database error text........: "ORA-01114: IO error writing block to file %s (block # %s)"  Internal call code "[RSQL/FTCH/LIPS ]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "AQIWGM==========TS============" or "AQIWGM==========TS============"
    "START-OF-SELECTION"
    Thanks a lot,
    Barbara

    From the dump:
    > select LIPSLFIMG LIPSLGORT LIPSPOSNR LIPSVBELN LIPSVGBEL LIPSVGPOS
    002590 VBUP~WBSTA
    002600 into (LIPS-LFIMG , LIPS-LGORT , LIPS-POSNR , LIPS-VBELN , LIPS-VGBEL , L
    002610 , VBUP-POSNR , VBUP-VBELN , VBUP-WBSTA )
    The listing seems to be cut off, so I don't know if this is the error or not, but it's something you can check.
    Rob

  • FM to deschedule Multiple SM37 Jobs

    Hi All,
    I need to deschedule about 250 SM37 Jobs.
    Is there any FM or Program to accomplish this, So that i can give only list of jobs and let the program to deschedule.
    Regards,
    Vijay.

    Hi,
    See the Belwo FM's
    <b>SAP_REORG_JOBSTATISTIC</b> --> Deletes job statistics for jobs not run since the specified date (statistics no longer needed since job was a one-time occurrence or is no longer run)
    <b>SAP_REORG_UPDATERECORDS</b> -> Deletes old completed update records (automatic delete deactivated); deletes incomplete update records (automatic delete deactivated).
    Even you can runa Small Select statment on table <b>TBTCO</b> ro deschedule the SM37 jobs ....
    Regards
    Sudheer

  • Writing in SM37 Job Log

    Hi Abappers,
    I have a requirement in which I am displaying all the error messages in an ALV when my program runs in Foreground. But this program runs in background, those error messages must be displayed in the Job Log of SM37.
    I should not raise any error or information messages to come in log automatically as it affects the foreground processing of my program.
    Is there any FM to write in the Job log?? Or can I use the Message statement in such a way that it is not diaplayed in forground?
    Thanks in Advance,

    Hi,
    Try this.
    If you are using ALV grid in the foreground, use the same without without creating the container (basically check the SY-BATCH, before creating a container).  Then the same ALV grid  will create a spool with all the messages during background execution.
    Regards,
    Sharin Varghese

  • SM37 Job is not visible in SM50

    Hello Gurus,
      I am seeing a peculiar situation- We ran a job and after a while I am seeing it has dissappeared from SM50 but has "Active" status in SM37.
    *We have only one application server.
      Does anybody have any idea how it could be cancelled.
    Cheers,
    Ankur

    Hi Subhash,
      The issue was that Job was active in SM37 but was not present in SM50. I found the answer and this is due to termination of work process without making a call to "BtcCleanUp" kernel function .
    Anyway thanks for replying.
    Cheers,
    Ankur

  • How to remove spool generation setting for SM37 job.

    Hi All,
    please help ASAP as this is production issue.
    There is a job in SM37 which is running daily and it is creating a spool with nearly 10000 pages.
    we dont need this spool as it is now not useful to us.We want to run this job without generating the spool.....
    Im stuck here...pls help me...what should I do?
    As user are not priting these spool requests so the option "delete after print" is also not working....
    so due to huge spool,all jobs are getting delayed..
    please help ASAP....

    Hi,
    Is this related to Business Objects WebIntelligence reporting ontop of BW ?
    Perhaps this thread need to be moved to BW warehouse administration?
    Regards,
    H

  • Auto schudule sm37 jobs - one after another

    Dear all,
    my doubt was explained in the below..
    Assume In sm37, I'm having 3  jobs named as X, Y & Z  it will run daily basis..
    Consider X will start at 1am, Y at 2am & Z at 3am.
    X will release one background  job once it get successfully completed. Dynamically it will assigned the background job name of X.(Ex .X started 1am &  released  the job at 01:01:00 so job name dynamically assigned as JOB_X_20111105_010100 - as per time stamp)
    the same concept of other jobs (Y & Z)
    we schedule 3 jobs at given  time, but Job X started and released the background job, it completed 1:30am. so next job Y will start at 2:00am only.
    i want to fulfill the gap of half an hour.
    so my question is first i trigger a job X. Y will be waiting for the Job X completion. once X getting completed(X background job), job Y will start to release their background job like that.
    Hope it was clear.. Provide me some idea's..
    Regards,
    Vasanth S

    Dear Subhankar Garani,
    I want to wait upto the X background job completion. then Start Y...
    Regards,
    Vasanth

  • SM37 Job Delay Seconds

    Hi, When my scheduled LIS Jobs run on R3 I am noticing that they all show some kind of Delay in SM37 before they run.  The Jobs run every 4 hours and during most of the runs there isn't any real amount of system activity going on so I'm guessing this shouldn't be happening.
    Can anyone tell me what would cause this delay and what/should I do anything about it?
    Thanks!

    Ken,
    How much is the delay? Is it < 60 seconds or more than that? The job scheduler wakes intermittently to run the background jobs (parameter rdisp/btctime in the instance profile). If it is more than that, then it usually there are no available jobs on the designated server or in the system.
    -regards

  • Transaction SM37 - Job overview

    In this transaction, i can see Jobs status as
    - Scheduled
    - Released
    - Ready
    - Active
    - Finished
    - Canceled
    Is there a sequence which has to be followed ie, first will be active, released ...... finished.
    ALso what is scheduled Job do.

    Hi,
    you no need to follow any sequence in SM37.
    Once u create a job via SM36 or via some programs, the jobs will be coming under Scheduled job.
    If you submit a job via program, the job will be released automatically. but if u schedule a job theu SM36 , it'll be under scheduled and u have to release that job to run--u can see release button
    Once u release that job , it'll go to active state and then finished or if any issues come , it'll be under cancelled..
    Scheduled
    - Released
    - Ready
    - Active
    - Finished
    - Canceled
    These are all for users to see the job, I mean the Job status. This whole cycle will be run automatically. U need to release the Job that's it.
    Edited by: Selva M on Aug 19, 2009 2:52 PM

  • SM37 - Job overview

    In this transaction, i can see Jobs status as
    - Scheduled
    - Released
    - Ready
    - Active
    - Finished
    - Canceled
    Is there a sequence which has to be followed ie, first will be active, released ...... finished.
    ALso what is scheduled Job do.

    Hello Rajesh,
    Any background job goes through the following states 'in that sequence':
    1. Scheduled (the job has been planned, it will execute at some point of time in future, but you may still edit the job steps at this stage)
    2. Released (the job steps cannot be edited, any job scheduled in 'immediate' mode will be in released state directly)
    3. Ready (the job is in execution queue and is about to be executed depending upon availability of background work process and the job priority)
    4. Active (the job is being executed by a background work process, you may monitor this in sm37 and sm50/51)
    5. Finished (all the job steps completed successfully) OR Cancelled (there was a error and job has been terminated, as mentioned in the job log)
    Coming to your second question, scheduled job will go through the states mentioned above before its finished or cancelled.
    This may clarify your doubts.
    Regards,
    Saurabh.

  • SM37 - Job analysis - help

    Hi,
    We have a job that runs after saving a service order, which pushes some information to a custom table.
    The job runs in our Development and Production systems. However, we have several other testing systems and this job does not run after saving a service order (IW32).
    Where do I need to look to find why its not running? Is it configured somewhere?
    Please help,
    Laura

    Hi,
    SM37 will show you the scheduled jobs, it maybe that you need to create a job based on an event that is raised within IW32.
    To find out exactly how it hangs together I'd suggest displaying the bespoke table in SE11 and performing a where-used search. This should point you at the programs that update the table and hopefully how they are triggered.
    Darren

  • Sm37 job tunning is slow

    Hi
              while processing a job in SM37 the system is taking longer time than usual. Earlier it was taking 1 hour but where as now a days it is taking more than 5-6 hours. Please advice me ur reply will be appreciated.
    Regards
    Satya

    HI Satya,
    For that you have to change the jobs class from C to A. After that it wont get that much of time for running job, why because if you give job class C system will give low priority.So mention job class A system will give High priority for that job.
    Regards
    Surya

Maybe you are looking for