SM58 Error Message

Hi,
Does anybody know the resolution for the following
In SM58 status text showing "Select one of the install language" and it has failed ?
Any thoughts ?
Please let me know if you need more information
Thanks

Hey,
SM58 errors occur due to RFC destination, Check SM59 what lang you have chosen (Logon & security- Tab ).
Cheers
Agasthuri

Similar Messages

Inbound Function Module SM58 Error in Outbound R3- XI- file Scenario

I am getting an SM58 error message of "Use IDOC Adapter for FM IDOC_INBOUND_ASYNCHRONOUS...." in my R3 system when trying to implement an Outbound R3->XI->file Scenario. This implies that the system thinks I am doing inbound when I am really doing an outbound IDoc to XI. I followed the guides and seem to have everything set up properly.
I also found a closed posting concerning the same error message, but there was no resolution.
My idoc also appears fine (outbound, right ports). To test, I changed my XI rfcDestination to an EDI System rfcDestination and the ORDRSP outbound idoc goes to the edi system as expected.
Any idea why my R3 system thinks I am using IDOC_INBOUND_ASYNCHRONOUS?
Thanks in advance!

Hi,
I have couple questions before exactly answering your question
What type of data you are trying to send like
1. Master data (Customer master, Vendor master)
2. Transactional data (Sales orders, Purchase orders)
If you are trying to send transactional data then check the partner profile configuration for whom you are trying to create outbound IDocs. Select your partners outbound message type and go to Message Control details tab and check your Process code and corresponding functional module if the function module used is ment for creating outbound Idocs then there should be some other that is causing the problem otherwise I guess this is the problem so you can change the associated process code function module.
Jagadish.

SM58 Errors due to Work Item/Task

Hello,
we are getting a lot of sm58 error messages related to a workflow task TS00007989 (Error during outbound processing).
All the errors carry the same message "Work item 000000549001: Task TS00007989 locked for instantiation"
What could be the root cause of this issue? Is it possible to resolve this without deactivating the standard workflow task.

Hi Mohan,
Its RFC error. Please check the workflow instance using T-code SWI2_DIAG to get details about this error. Also you can contact your BASIS Team for the same to check the connectivity of the system for which these IDOCS get triggered.
Also check the T-Code WE02 to get details about error in IDOC.
BR,
Prakash

JDBC - XI - IDOC scenario, SM58 error

I am trying to set up a scenario with JDBC -> XI-> IDOC. I seem to get the data, but when I look at it in SXMB_MONI, I get the checkered flag, for the overall status, but a red flag for the outbound status. This led me to SM58 where I see this error "No authorization to send IDocs with message type Z...". It shows the caller ID as being XIAFUSER (which is different from the ID I have created on the receiving SAP system) and is in function module IDOC_INBOUND_ASYNCHRONOUS. On XI, I have the RFC (SM59) and Port (IDX1) setup for the receiving SAP system. The receiving system has an ID setup (used in the RFC on XI), has a partner profile, port, logical system, and a RFC to XI setup.
Any ideas on where to track this down? I tried giving XIAFUSER sap_all, and it still fails and this ID does not exist on the receiving system.

HI,
Just to inform you that, if any SM58 error, mainly because of IDX1 entry and RFC destination .
So that;s the reason , i just suggested to check this SAP note.
Now you have given SAP_ALL access to test right ? Even you can check with this SAP note-837595
Also check that SM59 (RFC destination) in XI system uses any User ID ? DO not select CURRENT USER option here.. and check it
Regards,
Moorthy

Changing the Error message in the background

Hi Experts,
Is there any way to catch the Error message in the background apart from changing the message type.
Because the error message is coming from a standard function and I want my program should handle the error message. Whether this can be possible if possible can anyone please let me know the process.
Thanks in advance.
Regards,
Srinivas
Edited by: Srinivas Hari on Jun 23, 2009 10:08 AM

Hi Srini,
The question is not very clear still I am trying to answer this.
If my understanding is correct you are trying to run a standard function module in background task in your custom program and that FM is giving some error messages but not raising any exceptions and you are trying to catch those exceptions in your program. If that is be the case then yes you can definitely catch that error messages.
Step 1 : Call function 'XXXX' IN BACKGROUND TASK
Step 2: Call function 'ID_OF_BACKGROUNDTASK'
Step 3: COMMIT WORK and WAIT.
Step 4: Call function 'STATUS_OF_BACKGROUNDTASK' ---> passing the id number which you will receive in Stpe 2.
Basically the step 4 would return you the error messages which would be visible in Transaction SM58.
Regs,
Somnath

Caller 09 contains error message in BI7

Hello Guru's,
We have a custom data source in r/3(full load) and we loaded full load last nigth to DSO and it is sucessfull.
Custom datasource is changed in r/3 today . so we replicated the datasource , activated Transformation , DSO , DTP, Deleted last nigth loaded request and try to load the data to PSA and we are getting following error message .
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
As it is common error we face in BI Implementation .
we followed these steps .
1) RFC Connection is checked and it is fine .
2) ST22 is checked and we couldn't see any error in R/3 side .
3) sm58 is checked and we couldn't see any IDOC'S in R/3 side .
4)Checked Extract checker RSA3 . we could see 10 records for that data source.
5) We thought it is Time stamp issue and we ran Program RS_TRANSTRU_ACTIVATE_ALL and activate the transfer rules and try to reload.( Not Sucessfull )
6) As above step doesn't make sence as we don't have Transfer rules for 7x datasource . we ran RSDS_DATASOURCE_ACTIVATE_ALL program and activated datasource and try to load the data and we have same issue.
7)we are checked Background user Aleremote . It is not locked.
8)BI side we relplicated datasource , activated , created a new infopackage and try to load the data . still we have same issue.
finally we thought it to be issue is not on Bi side and is on R/3 side .
Please let us know how to solve this issue .
Thanks,
PK.

Hi PokerKing:
You're getting the error because the structure of the data loaded yesterday is different from the structure of the data loaded today.
Delete the data both on PSA and on the DSO an reload.
Regards,
Francisco Milán.

SM58 error: EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is empty

Hi All,
In SM58, we see the below error. If we open the detailed error message, its acutally for a aleaud idoc to be sent to a R/3 system. But we have disabled ALEAUD idocs for that r/3 system.
Any suggestions on how to resolve the issue?
Regards,
Aarthi

Hi Aarti,
The error only occurs if all segments are deleted in the version
change in the ALE outbound processing. The cause can be an incorrect
filling of the IDocs by customers or an application or an incompatible
entry for the IDoc type in the partner profile.
please do the required correction in IDOC.
Please refer sap note [305375|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_mid/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d333035333735%7d]
Regards,
Srinivas

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

SM58 Error Message

Similar Messages

Maybe you are looking for