SM59: Remote Log on: nothing happens
We have the problem to access remote a SAP system from another SAP system (SOLMAN) via SM 59 --> Remote Logon.
Following was allready done:
- the same user is exist on both system
- the appropriate user in SM59 has S_RFCACL object
- the settings in SMT1 and SMT2 are ok
Question:
What can be the error here?
Any helpful information will be very appreciated!
> Once I try again or leave and enter the same RFC connection nothing happen.
You are already logged on and a SAPGui session has been attached (due to your user type).
But you are not requesting anything which is interactive, so the remote system just yawns...
Try calling another FM via the existing destination which stops in a screen - the remote system will respond again.
The difference is that SM59 is an admin transaction for the destionations. Try using the transaction which uses the destinations and you will experience consistent behaviour if they (and the authorization...) is configured correctly.
Cheers,
Julius
ps: I also deleted your duplicate posts. Next time your IDs get deleted and blocked from SDN as well...
Edited by: Julius Bussche on Aug 19, 2009 10:10 PM
Similar Messages
-
firefox never opens. its what I always would get on the internet with now the symble is there but its dead. i downloaded the latest version and then everything changed, when I logged off I could not get back on to the internet. I can get on the internet using enternet explorer but not mozilla firefox
I can't answer the first question below because it NEVER open anymoreI have the shortcuts on my browser to the sites that I go to frequently. It's when I press those buttons (which have always worked before and I checked their URLs) it takes me to the Yahoo Page not Found page. But then when I click the shortcut button again, it usually works.
-
I can't log into my iTunes account on my iPhone 5s. I logged out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. I then tried to log back in immediately afterwards. I was unable to do so. After clicking "sign in" at the bottom of the apps main page, it brought up another menu where I clicked "Choose existing Apple ID". After pressing this the menu disappeared and nothing happened. I tried this multiple times and received the same result each time. I tried the other available option of creating a new AP ID to log in with and that one worked perfectly fine. I am clueless as to why the log in for me is either not able to load or just completely blocking me from getting back into my iTunes account on my phone. Not only can I not listen to the music I currently have, but I cannot log in to purchase the new music that I wanted to with my unused iTunes gift cards
I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3 -
I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements. -
I did the software update and after downloading and loading the ATV just hung-up with a fast blinking white light on the front of ATV. Tried a reset with the remote - Menu /downkey and nothing happened. Is the software corrupt or did it wipe out my ATV?
Apple TV 1st generation or 2nd?
I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port -
i am setting up an ipod touch for my daughter, created her an account, had it verified, but when I get to the section that reads 'connect to itunes' I plug it into the computer with her log in and nothing happens. HELP. I have been at this for 4 hours
Hello GJS6,
Thank you for the details of the issue you are experiencing when trying to connect your daughter's iPod touch to the computer. I recommend the following article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
What I have tried:
Uninstalled iTunes,
Removed firewall and protection.
Re-installed iTunes 64bit (still get the same issue)
Restarted firewall, added apple.com etc.
I have created a new user profile to no vail.
Still the same issue. I can access using my iPodI am having the same problem ever since I upgraded. Have received four emails from Apple support on the
issue and nothing has worked. Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
me to sync my Iphone with the ios 5 upgrade. Went back to 10.5 and sometimes get exactly what you do when
I try an access the store. It looks like something is clearly missing. Have done just about everything I have seen
on threads but nothing works. Really need help. -
I just downloaded osx lion and when i click the lion icon nothing happens why cant i log in?
I just downloaded Mac osx lion and at the login in page when I click the lion nothing happens why can't I log in?
Sounds like a Windows installer. Does it say Mac on the disk? When you open the dmg, does it say Office:Mac?
-
I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.
Can you select them with "Arrow left" or "arrow right" key on your keyboard?
-
I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past log in page. I even had to use Internet Explorer to login to ask this question!
On the page where you enter username and password after entering and pressing "Log in" the page just stays in place. If you look at the error log you see
"Warning: Unknown property 'border-radius'. Declaration dropped.
Source File: https://support.mozilla.com/media/css/common-min.css?build=3fabbc0
Line: 1"Make sure that you do not block the referrer.
* http://kb.mozillazine.org/network.http.sendRefererHeader
Also make sure that you do not block cookies in Firefox or the firewall.
* [[Cookies]]
* [[Enabling and disabling cookies]] -
I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta
Its a 5.3 GB file. It might takle a while to download.
When done, it may open automatically, but the file will be in your apps folder
Grant -
Just got an iPad. Have created an Apple ID but can't log into the apps store. Press sign in and nothing happens. Any advice?
Have you just created the Apple ID? If so it's possible you may need to activate it after receiving an email? Have you checked for an activation email? I can't be sure if it does send one or not as did mine ages ago.
You may also find this useful if you continue to have problems: http://www.apple.com/support/appleid/
Regards,
Steve -
Cannot open Remote XUL manager under Developer - version 29.0.1 - nothing happens!
I found that after Firefox v29, a LOT of my settings and<BR>
add-ons were changed / reset. Try this;<BR>
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
<BR>While you are in safe mode;<BR>
'''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
Then check ALL of your settings. Browser and add-ons. Then restart. -
An Apple TV update was processed (Steps 1 and 2). The Apple TV device then did not indicate it was on. I press the remote button to turn it on and nothing happens. What is wrong? What do I have to do? I even replace the battery on the remote to insure it was working.
Welcome to the Apple Community Glenn283.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Trying to log on to portal - nothing happens
When I try to log on to portal or ume I input my login and password and nothing happens.
When I try to log to portal using different logins a message appears - Authentication failed. User is already authenticated as a different user.
Has anybody an idea which logs to see or what to do?Hi Aleksey
When you supply user credentials to the portal, the J2EE creates a cookie for that user-id through which the user logs on to the portal. It seems like the cookie is not being generated due to some reasons and you are re-directed to the logon screen again.
Kindly check if the portal URL meets the cookie specifications :
SAP Note : 654982
URL requirements due to Internet standards
If this is not the case, kindly attach the error from default Trace file after reproducing the issue.
Regards,
Nitin Mehra
Maybe you are looking for
-
External hard drive is hidden and I can't get to it
I got the bright idea to hide the icon of my Lacie firewire hard drive from my wife's account. It disappeared from my desk top as well and now I can't get to the information on the hard drive. System profiler says it is attached to the firewire port.
-
ITunes Library stored on external hard drive
My iTunes Library is contained on an external hard drive which is in turn connected to an iMac, all of which connects to my airport network. I control the playback of the content on my Powerbook on the various airport express fed music systems in my
-
When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb. After the installation the computer is showing the message every time.
-
Please Help
-
How To Deploy Message Driven Beans in SAPJ2ee 6.20?
<b>How To Deploy Message Driven Beans in SAPJ2ee 6.20? </b> I<b> tried to deploy default example from SAPJ2ee installation, I do the prerequisites provided by tutorial, but at phase deployment appears Exception that ejb-jar.xml is incorrect</b><b><i