SM69 error-Can't exec external program (Permission denied).with exit code 1

Hi All,
I am trying to execute UNIX script via creating commend line in SM69.
But i am getting following error:
"Can't exec external program (Permission denied)
External program terminated with exit code 1"
Can any one guide me what could be the cause of this error.
Any Help will be appreciated.
Thanks & Regards

First use SU53, to see if you have all SAP-authoritys.
But I think, you have no authority to execute UNIX-programs.
or your UNIX-script is not executable?

Similar Messages

Can't exec external program (Permission denied)-

Hi All
We have mentioned external command in SM69 and executed the command in SM49, I am getting the below error message.
Command executed:
/home/ SMIME/run/signand.sh :
Target host:            dt02
Can't exec external program (Permission denied)
External program terminated with exit code 1
Program wise also I am unable to execute the command & I am getting sy-subrc eq 1. Please help me which authorization object is missing to run the external command.
u_comm = /home/ SMIME/run/signand.sh
CALL 'SYSTEM'
ID 'COMMAND' FIELD u_comm
ID 'TAB'     FIELD rt-sys.
Please confirm.

Can you please check the permission for /home/ SMIME/run/signand.sh, perform below command
chmod 755 /home/ SMIME/run/signand.sh
and retry.

SM69-Can't exec external program ( External program terminated with ecode1)

Hi All,
Client requirement is to Move File from Presentation Server to Application Server.
I am executing UNIX script on AIX OS via SM69.
But I am getting the following error:
Can't exec external program (No such file or directory)
External program terminated with exit code 1
Also getting same error with FM-SXPG_COMMAND_EXECUTE .
Below is the code..
data: l_exitcode type btcxpgexit,
        l_parms type btcxpgpar,
        l_status type btcxpgstat.
data: lt_protocol type standard table of btcxpm,
        l_protocol type btcxpm.
concatenate 'C:\Venkat1\PARBIND.BMP'
                      'D:\Venkat2\PARBIND.BMP'
                      into l_parms
                      separated by space.
* External command:
* - Unix - mv
call function 'SXPG_COMMAND_EXECUTE'
exporting
    commandname                   = 'Z_MV'
    additional_parameters         = l_parms
importing
    status                        = l_status
    exitcode                      = l_exitcode
tables
    exec_protocol                 = lt_protocol
exceptions
    no_permission                 = 1
    command_not_found             = 2
    parameters_too_long           = 3
    security_risk                 = 4
    wrong_check_call_interface    = 5
    program_start_error           = 6
    program_termination_error     = 7
    x_error                       = 8
    parameter_expected            = 9
    too_many_parameters           = 10
    illegal_command               = 11
    wrong_asynchronous_parameters = 12
    cant_enq_tbtco_entry          = 13
    jobcount_generation_error     = 14
    others                        = 15.
if sy-subrc ne 0
endif.
Can any one guide what is the cause of error....
Any help will be appreciated.
Regards
Arbind

Hi Paul,
Thanks.
But still Basis Consultants are telling it is correct from there side.
Is there any other way to move files from Presentaion Server to Application Server in Background Processing.
I have used CL_GUI_FRONTEND_SERVICES=>FILE_COPY
It is working fine in Foreground but in Background Proceesing, it is not working.
Can u provide any solution ?
Thanks
Arbind

SXPG_COMMAND_EXECUTE Can't exec external program (No such file or directory

Hi Experts,
I need to launch or terminate an external application (i.e. command prompt, notepad, etc.) in background job by using FM SXPG_COMMAND_EXECUTE. However, I am unable to proceed because of the following error occured after executing the command in SM69.
Can't exec external program (No such file or directory)
External program terminated with exit code 1
I was using the following sample code. Can someone tell me what might be the cause of the problem?
DATA: lv_status TYPE extcmdexex-status,
      lt_output TYPE TABLE OF btcxpm,
      lv_opsys TYPE sy-opsys.
lv_opsys = 'WINDOWS NT'.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
    commandname                   = 'ZIEXPLORE'
    additional_parameters         = '/c'
    operatingsystem               = lv_opsys
IMPORTING
    status                        = lv_status
TABLES
    exec_protocol                 = lt_output
EXCEPTIONS
    no_permission                 = 1
    command_not_found             = 2
    parameters_too_long           = 3
    security_risk                 = 4
    wrong_check_call_interface    = 5
    program_start_error           = 6
    program_termination_error     = 7
    x_error                       = 8
    parameter_expected            = 9
    too_many_parameters           = 10
    illegal_command               = 11
    wrong_asynchronous_parameters = 12
    cant_enq_tbtco_entry          = 13
    jobcount_generation_error     = 14
    OTHERS                        = 15.
ZIEXPLORE command
Operating system command: cmd
Parameters for operating system command: taskkill /f /im iexplore.exe
Thanks and Regards,
Louie

Hi Louie,
I am not able to assume the reason of the problem, If you say that its not getting executed in SM49 then the problem lies there.
So I am providing you a link which might be helpful, just go through it and cross check. There is a parameter called "trace" in the fm mentioned.
Secton Microsoft Windows NT - [Prerequisites for Running External Commands and External Programs|http://help.sap.com/saphelp_nw70/helpdata/en/c4/3a7fbb505211d189550000e829fbbd/content.htm]
[Analyzing Problems with External Commands and Programs|http://help.sap.com/saphelp_nw70/helpdata/en/c4/3a80c4505211d189550000e829fbbd/content.htm]
May be you can post this question in [SAP AS General|SAP NetWeaver Application Server; also.

SM69-Can't exec external program (Exec format error)

Hi All,
I am executing UNIX script on HP-UX system via SM69.
But getting following error:
u201CCan't exec external program (Exec format error)
External program terminated with exit code 1u201D
Also getting same error with FM-SXPG_COMMAND_EXECUTE & SXPG_COMMAND_EXECUTE
Can any one guide what is the cause of error.
Any help will be appreciated.
Regards

Check the Sample program. You can test or check the Unix commands using the below program.
You can use the commands Like LS to list all the files.
REPORT ZUNIX line-size 400
                no standard page heading.
data: unixcom like   rlgrap-filename.
"7 full perimission to read
"7 full permission to change
"7 full permission to delete
unixcom = 'CHMOD 777 fillfullpath'.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
                id 'TAB'     field tabl[].

ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546

My install of Photoshop CC failed during download with the error message:
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Charles\AppData\Local\Temp\{6451C8AE-D1A8-4B06-9A19-583A0AAC7146}\Photoshop_15_ LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
But I don't find anything in the path described.
The machine is an Asus desktop PC running Windows 8.1 (which I hate and despise) but was stuck with on this recently purchased PC.
Since I can't find the file or error code -2147024546 what is my next step to complete an install?
Thanks,
Charles

Charles the Microsoft Visual C++ 2012 Redistributable Package (x86) component of your operating system has become damaged. You can reinstall it from Latest Supported Visual C++ Downloads.

ERROR: An error occurred during the installation of assembly component / ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
Thx

Claasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages.

Error installing mastercollection cs6 Windows7 x64 - ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603

Here's the error summary:
Exit Code: 6
See error summary below:
I installed the Visual C++ 2008 redis pkg from Microsoft site (both x86&x64) then tried reinstalling and after 2 hours the very error and nothing installed!!!
VERY FRUSTRATING...
Please advise
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com

uninstall those old ms vc packages and install the latest, Latest Supported Visual C++ Downloads
then uninstall anything cs6 that did get installed, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\ ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

I try to install lightroom 5.6 and receive Exit Code: 7 ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Same problem. I have CC installed on Win 7 with all other apps working fine. Tried to install Lightroom 5 and got:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.0.0 Adobe_Lightroom_x64.msi_5.7 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {5C21D397-1DA5-
3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
I uninstalled all Adobe CC software, ran Adobe CC Cleaner, cleaned my Registry using Piriform CCleaner 5, rebooted and reinstalled CC from scratch. Same problem--everything else installed correctly except Lightroom 5. Also tried uninstalling KB2918614--no joy.
Dayton

Cant download lightroom 5..ERROR: Third party payload installer Adobe_Lightroom.msi failed with exit code: 1603

every time i download lightroom 5 it fail and says the cause is this (errror: third party payload installer Adobe_Lightroom.msi failed with exit code: 1603..

you should dl lr 5.7 and then check that your download is complete. if the same error message results when you try to install, start here - Error 1603: A fatal error occurred during installation
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When attempting to download the trial version of Photoshop I got these errors: ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546 ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86).

Why is this happening and what do I do about it.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

ERROR: Third party payload installer InstallAdobeMuse.exe failed with exit code: 7

I am trying to load Muse onto my labtop but for some reason, this keeps happening. Please advise on how to fix this error. Greatly appreciate it.

Re: Can't get CC to install Muse??

Error: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546

There was also an error for "Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at"
Would anyone happen to have an answer?
I'm on a college campus with super fast internet download speeds, and i have a beefy Lenovo. Y510P with dual graphics cards i7

Hi,
When are you seeing this? Can you try launching Ps and right after hold down the shift key?
Close Photoshop.
Hold down the Shift key and launch Photoshop. A dialog will appear during launch that reads "Skip loading optional and third-party plug-ins?"
Click Yes to skip loading optional and third-party plug-ins.Note: This only disables optional and third-party for the current session. If you quit and restart Photoshop without holding down the Shift key, the optional or third-party plug-ins will be enabled.
My guess is that you have a third party plugin which is causing this to happen.
regards,
steve

ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603

Okay so i know that this is probably just a pc compatibility issue, but this come up after Creative cloud shows the extracting step. its some kind of driver maybe idk someone please help!

Hi cloudeg,
Please refer to the thread below where this issue stands resolved:
Install problems (three programs)
Regards,
Sheena

SM69 error-Can't exec external program (Permission denied).with exit code 1

Similar Messages

Maybe you are looking for