SM69 issue

Hi All,
We have written a unix shell script to do ftp from unix to some shared drive in network, which we need to run from SAP. We have tested the shell script command and it is running fine.
We have created an entry in SM69 for running this.
But when we try to run this command either by FM 'SXPG_COMMAND_EXECUTE' or by SM49 we get an error status saying <b>'Can't exec external program (Exec format error)</b> .
Can anyone help me out?
Thanks,
Santosh.

hi Santosh,
I have also faced the same problem. When you run the script in the unix environment, it runs perfectly, but when you run through SM49 or FM  'SXPG_COMMAND_EXECUTE'  you may get this error. This can be resolved by giving '&' equal to the number of parameters you are passing to the script. you can give '&'  in SM69, select your external command name, click on Change button. Then write '&' in the Parameter for operating system command field.
I hope this may help you out in resolving the error and get back to me if problem is not resloved. If it help then reward me with the points.
Regards,
Bahul

Similar Messages

  • Using a Logical File (FILE) in an External Command (SM69)

    I have an external command defined in SM69 that runs a script on the application server. The command is called from within an ABAP program with SXPG_CALL_SYSTEM. It currently works as it should.
    The issue is that the external command is defined as:
    sh /absolute/path/to/script/file
    I have been told to instead set up a logical file in FILE so that the command would be:
    sh <MY_SCRIPT_LOGICAL_NAME>
    I've gone into FILE and defined MY_SCRIPT_LOGICAL_NAME as:
    Logical File = MY_SCRIPT_LOGICAL_NAME
    Name = Descriptive Text
    Physical File = <SYSID>actualname.scr
    Data Format = ASC
    App Area = HR
    Logical Path = SCRIPT_PATH
    where SCRIPT_PATH is also defined in FILE with the physical path of:
    /iface/<SYSID>/outboundhr/scripts/<FILENAME>
    So when I try executing the command with SM49 as defined as:
    sh <MY_SCRIPT_LOGICAL_NAME>
    I just get Exception raised: OTHERS
    If I define the command as:
    ls <MY_SCRIPT_LOGICAL_NAME>
    I get the same thing, Exception raised: OTHERS
    I'm guessing that the logical file name isn't getting translated. Does anyone know if it should in this instance? Is anyone using a logical file as part of an external command?
    Thanks much.

    I think you must use FM FILE_GET_NAME to translate the logical file name to a physical one before executing the command.
    Like:
    DATA: physical_file_name(60),
          my_script_logical_name(60) VALUE 'CLASSIFICATION',
          format(3).
    CALL FUNCTION 'FILE_GET_NAME'
      EXPORTING
        logical_filename = my_script_logical_name
      IMPORTING
        file_format      = format
        file_name        = physical_file_name
      EXCEPTIONS
        file_not_found   = 1
        OTHERS           = 2.
    Rob
    Message was edited by: Rob Burbank

  • SXPG_COMMAND_EXECUTE issue

    Hello Experts,
    We have this issue in client server.One of the batch job is frequently failing while executing this function module SXPG_COMMAND_EXECUTE with error as command_not_found.This error occurs frequently on a particular application server but not all the times it fails but we find some job failures 2 to 3 times a day,as this batch job is running every 15min.Please find the sample code below and advice.Many thanks in advance.
      CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
           EXPORTING
                commandname                   = 'ZZ_YP_MKDIR'
                additional_parameters         = w_command
           TABLES
                exec_protocol                 = i_command_results
           EXCEPTIONS
                no_permission                 = 1
                command_not_found             = 2
                parameters_too_long           = 3
                security_risk                 = 4
                wrong_check_call_interface    = 5
                program_start_error           = 6
                program_termination_error     = 7
                x_error                       = 8
                parameter_expected            = 9
                too_many_parameters           = 10
                illegal_command               = 11
                wrong_asynchronous_parameters = 12
                cant_enq_tbtco_entry          = 13
                jobcount_generation_error     = 14
                OTHERS                        = 15.
      IF sy-subrc = 0.
        LOOP AT i_command_results.
          WRITE: / i_command_results-length,
                   i_command_results-message.
          IF i_command_results-message <> space.
            w_error = 'X'.                                      "AN14112002
            MESSAGE i179(zv) WITH i_command_results-message
                                  v_char_seqno.
            "'Make Directory failed'
          ENDIF.

    Hi swathv     
    That function is used for calling Unix scripts on the application server,
    You can specify a unix script as a command on transaction SM69
    and than you can call this command with function 'SXPG_COMMAND_EXECUTE'
    Can you find this command in SM69 and related script,
    and learn what is it used for?
    Maybe you are using more than 1 application server,
    and script file exist on a server but doesn't exist on other.
    I hope it helps.

  • Starting external progran SAPXPG failed (SM69)

    System Information:
    ECC 6, Oracle 10.2, AIX 5.3, Kernel Patch level 147
    Hi all,
    We were encountered problems when try to scheduled actions in DB13.
    We had install CI & DB on separate server and the rfc SAPXPG_DBDEST_<Destination> is not working.
    We tried to use RSH in SM49/SM69 to start external program SAPXPG in target host remotely, however, it return External program terminated with exit code 1 when we executed it.
    *External command we used
    Rsh
    Target host u2013l <sid>adm sapxpg
    Logs of dev_cp:
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main  SAPXPG 700
    2009-02-05--21-18-10 : Before BtcXpgDetach
      > Function: BtcXpgDetach  < Function: BtcXpgDetach  Accept RFC connection from R/3 system
    2009-02-05--21-18-10 : Before RfcAccept
    2009-02-05--21-18-10 : RfcAccept returned OK
    security check switched OFF
      Install RFC call SAPXPG_START_XPG
      Install RFC call SAPXPG_START_XPG_LONG
      Install RFC call SAPXPG_END_XPG
      Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2009-02-05--21-18-10 : Before first call of RFCDispatch
      > Function: BtcXpgStartXpgLong
    2009-02-05--21-18-10 : Beginning of BtcXpgStartXpgLong
        > Function: BtcXpgStartXpgImportLong      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgStartXpgImportLong
    BtcXpgStartXpgLong: special_trace_flag = <3>
        > Function: BtcXpgStartXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcTrcReset      < Function: BtcTrcReset      Call mode: VIA RFC
          Input arguments of BtcXpgStartXpg:
            External program: rsh
          tracecntl = : 3
            Program argument string: bir-hrerpdb -l prdadm sappxpg
            Contents of control flags:
              StdIn control flag: redirect StdIn
              StdOut control flag: store StdOut output in memory
              StdErr control flag: store StdErr output in memory
              Trace control flag: unknown contents
              Termination control flag: control program will wait for termination
          > Function: BtcXpgCheck        > Function: BtcXpgArgv
              parameter number 1:
              Scanned parameter: bir-hrerpdb
              parameter number 2:
              Scanned parameter: -l
              parameter number 3:
              Scanned parameter: prdadm
              parameter number 4:
              Scanned parameter: sappxpg
              Total number of arguments scanned: 4
              Argument argv[0]: rsh
            < Function: BtcXpgArgv      < Function: BtcXpgCheck      > Function: BtcXpgSigInst        set signal handler for SIGCHLD to SIG_DFL
            old signal handler for SIGCHLD: SIG_DFL
          < Function: BtcXpgSigInst      > Function: BtcXpgStart        Process id: 172232
            Parent process id: 352710
            > Function: BtcTrcIni      Start status of external program: external program successfully started
          Id of external process: 0000323746
          StdOut/StdErr collected in memory
            Line  Text
            <No StdOut/StdErr output reported>
        < Function: BtcXpgStartXpgInt    > Function: BtcXpgStartXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgStartXpgExport
    2009-02-05--21-18-10 : End of BtcXpgStartXpgLong
      < Function: BtcXpgStartXpgLong
    2009-02-05--21-18-10 : After first call of RFCDispatch
      Wait for RFC call SAPXPG_END_XPG
    2009-02-05--21-18-10 : Before second call of RFCDispatch
      > Function: BtcXpgEndXpg
    2009-02-05--21-18-10 : Beginning of BtcXpgEndXpg
        > Function: BtcXpgStartXpgExport      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgEndXpgImport    > Function: BtcXpgEndXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcXpgReadChild        Process executing external program has terminated
          < Function: BtcXpgReadChild      > Function: BtcXpgEnd        > Function: BtcXpgLog
              Log message (44 byte): External program terminated with exit code 1
            < Function: BtcXpgLog
          < Function: BtcXpgEnd      Termination status of external program: program terminated with error code 1
          StdOut/StdErr collected in memory
        < Function: BtcXpgEndXpgInt    > Function: BtcXpgEndXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgEndXpgExport
    2009-02-05--21-18-10 : End of BtcXpgEndXpg
      < Function: BtcXpgEndXpg
    2009-02-05--21-18-10 : After second call of RFCDispatch
    2009-02-05--21-18-10 : After call of RfcClose (wait)
    < Function: main
    2009-02-05--21-18-10 : End of SAPXPG: main
    We couldnu2019t located any clear error indication that might help us in troubleshooting.
    We already configured settings in .rhosts file & we had resolve the permission problem
    We executed the following commands as user <sid>adm:
    In DB host, we executed rsh <CI host> date & it works.
    But in DB hosts, its doesn't work when we executed rsh <DB host> date
    Is this issue should be isolated as AIX OS issue?
    We couldn't execute any activities from DB13 as the DB rfc destination is not working.
    Is that alternative way that we can execute sapxpg on DB host?
    Or we have to install standalone gateway as solution? It's that any impact if we installing standalone gateway at DB host now (It's production system)?
    Thanks.
    BR,
    Terry

    Hi Guru,
    When we tried to execute the following command from host DB:
    rsh <Host CI> date
    it was return results.
    However, if we tried to execute from host CI:
    rsh <Host DB> data
    it was return no results.
    That's means we could'nt remotely start any of external command at DB host from CI host.
    Start external program error was isolated within operating system level.
    Any luck on this?
    Thanks.
    BR,
    Terry

  • SM69 command with elevation error

    Hi,
    I have a need to execute an SM69 configured command.
    The command is "route delete X.X.X.X Y.Y.Y.Y"
    On the server directly, I can do this without a problem.
    Via SAP and the SM69 command, I get an error/trace : "The requested operation requires elevation"
    ( Executing the command "route print" is not a problem )
    This would apparently mean that I need to run the cmd.exe application in Administrator mode.
    Is there any way I can accomplish this via an additional parameter in SM69 ( my guess = no ), or do I need to make sure that the SID<System> user has more rights on the server itself?
    Thanks for any input/views/guidelines.
    Geert
    PS the "route delete" issue is only relevant on win server 2008. On win server 2012, the issue is not present.

    Hi All,
    Thanks a lot for your responses.
    I think it was the basis issue. According to the basis the CPU was consuming 100% of the time & any new process was
    getting in the loop. therefore yesterday even on JVM installed machine the MDX error was given.
    I tried today & report is fetching the data correctly.
    Thanks
    Vinay

  • Reg:SM69 Error

    HI All,
    I am trying to execute a encryption kit by using the batch file  which are placed in the R/3 Application server using external OS command(TCode:SM69) in SAP ,but while executing am getting an error like "The system cannot find the path specified".Please suggest me how i can rectify this error.
    Regards,
    Arpitam

    Hi
    First of all, these errors are database errors and I am not an expert in database troubleshooting. I am an expert in Discoverer but this is not usually caused by Discoverer.
    NLS issues relate to language incompatibilities between the language set up on the database server and the language set up on the client PC. It could even be that you have have different language sets in use. My research tells me that older Oracle databases are more prone to this error than the newer ones. It can even be caused by the use of an old version of SQL Plus connecting to a newer database.
    This error is typically something that should be handled by a DBA who will have access to the system's error logs. If it is not a mismatch of languages, which is the usual cause, more than likely, your DBA will need to contact Oracle support.
    I hope this helps
    Regards
    Michael

  • SM69 - external command

    Hi,
    My developer is asking for a unix "mv" command to move files from one location to another (after successful processing of that file).  The "mv" command will be coded in the ABAP.
    I'm using SM69 to create a "ZMV" external command so that it can be called within ABAP.
    Now, I would like to control the location of where the files are moved to. 
    Does anyone know how I can use the "Parameters for operating system command" & "Additional parameters" fields in SM69 to control the location?
    Or is there another approach to tackle this issue?
    Thanks in advance.

    Hello Sisab,
    It is simple. Keep parameters blank if you don't want any special parameters lie <i> etc. However addtional parameters is important.
    Basically the syntax of move command would be
    mv <original path> <new path>.
    This part <original path> <new path> needs to be specified into addtional parameters.
    However you to give complete path.
    This would do the job for you.
    With Regards.
    Ruchit.

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Issue in Creation of Periodicals for Contracts in CRM7.0

    Hello,
    I have a requirement to create Contracts in CRM7.0 system.
    And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
    Good part is Contract Order gets created, but onlywith Header Details.
    The issues i am facing --
    1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
    2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
        here what does 'Logical Key' field indicate? What should be passed here.
        What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
    3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are -  Partner, Product, terms/appointments, Status, LongTexts......
    Any help/inputs would be appreciated.
    Hope my problem is stated clearly ...
    --Regards
    Dedeepya

    Hi Anu,
    i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
    Ensure that you are passing a correct entry in INPUT_FIELDS structure.
    As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
    You can preset your break-points at :-
    1. FM - CRM_ORDER_MAINTAIN
    2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
    3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
    Regards
    Dedeepya C

  • Issue in creation of plant related data at receiving server using BD10

    Hi all,
    This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
    When i entered into Log-
    1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
    2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
    My segemnt is as follows-
    ZMATMAS05                      matmas05
           E1MARAM                        Master material general data (MARA)
               Z1KLART                        KLART----
    My extention
               E1MARA1                        Additional Fields for E1MARAM
               E1MAKTM                        Master material short texts (MAKT)
               E1MARCM                        Master material C segment (MARC)
                   Z1AUSPM                        E1AUSPMDistribution of Classification:----
    My extention
                   E1MARC1                        Additional Fields for E1MARCM
                   E1MARDM                        Master material warehouse/batch segment (MARD)
                   E1MFHMM                        Master material production resource/tool (MFHM)
                   E1MPGDM                        Master material product group
                   E1MPOPM                        Master material forecast parameter
                   E1MPRWM                        Master material forecast value
                   E1MVEGM                        Master material total consumption
                   E1MVEUM                        Master material unplanned consumption
                   E1MKALM                        Master material production version
               E1MARMM                        Master material units of measure (MARM)
               E1MBEWM                        Master material material valuation (MBEW)
               E1MLGNM                        Master material material data per warehouse number (MLGN)
               E1MVKEM                        Master material sales data (MVKE)
               E1MLANM                        Master material tax classification (MLAN)
               E1MTXHM                        Master material long text header
               E1CUCFG                        CU: Configuration data
           E1UPSLINK                      Reference from Object to Superior UPS
    Thanks.
    Edited by: sanu debu on Apr 27, 2009 7:10 PM

    CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
    'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
    D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

  • Issue in Creation of new Value Field in CO-PA

    Hi,
    I have a query in CO-PA Value Field Linking.
    In my Development Client,
    1. Created a New Value Field (No Transport Request Generated)
    2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
    However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
    Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
    Please Advise.
    Thanks in Advance,
    Safi

    Thanks Phaneendra for the response.
    The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
    Please Advise.
    Thanks,
    Safi

Maybe you are looking for