Small Acrobat file causes 100% cpu usage with v. 7.09
Using Acrobat professional 7.09
I have a small acrobat file (94k) that causes my cpu to peg at 100% I used acrobat professional to convert an eps file to a pdf file. Is there a general known issue that could be causing this?
Stephen
> Looking at the plot, you might want to consider trying to use a vector graphic in the future. It looks like a plot that you may have created in MATLAB or such. In that case, why not just print to the PDF.
I used matplotlib, which can generate png, eps, svg, or even pdf files. The pdf in question was converted by acrobat from eps, which has worked well for me in the past. I wish acrobat pro 7 could handle svg.
Stephen
Similar Messages
-
Copying from USB NTFS device with Dolphin (KDE) causes 100% CPU usage
I am copying +/- 30 GB of Music files (flac) from my external USB HDD which is formatted as NTFS.
I have installed ntfs-3g and am experiencing near 100% CPU usage. What's wrong?
Additional info: I am using KDE and initiated the copying through dolphin. KDE's system monitor only shows CPU usage near 100%, but no processes in the process view could be responsable.
Thanks!What mount options are used for that ntfs drive?
Edit: There are many similar threads but I couldn't find a solution other than trying out some kernel and cpufrequtils fun.
Last edited by karol (2011-01-16 18:12:15) -
[10.1.2] Protected Mode causing 100% CPU Usage/Extra Processes on Win XP 32-bit?
Hello,
I'm not 100% sure if the two are related, but I have a client who was seeing 100% CPU usage using Adobe Acrobat Reader X 10.1.2 on Windows XP 32-bit and Firefox 11. The acrord32.exe process would hang around after closing the main window and eventually leading to tons of processes and his CPU at 100% use. I believe disabling Protected Mode may have solved this issue. I didn't see it documented anywhere so I figure I'd post about it here and see if anyone else was seeing this resolved as well.I noticed 'only' 50 % CPU usage. Not during Reader usage with ~ 20 %, but it started after closing main window.
Two instances of acrord32.exe were created - the moment pdf was opened - of which one was using zero CPU.
After opening another pdf, 2 more processes were created, so 4 in total. Have seen 2 of them using 100 %.
Issue is easily recreated.
This is all in 10.1.3, no fix from Adobe, only THE fix from you: turning of Protected Mode!
After which now only one proces is created, with 1 to 3 pdf documents opened at same time.
This instance is then nicely shutdown after the last pfd is closed. -
Windows 2000 SP4, 1g RAM, Firefox 9.0.1
We keep IE6 and Firefox open simultaneously for 2 different mail accounts. Firefox was always much faster even with 3 or 4 tabs open, but for the past couple of weeks when trying to update a screen the CPU suddenly goes to 100% usage and of course nothing will move until the particular process is finished. Closing one or more tabs does not help. If I close Firefox completely with Task Manager CPU usage goes back down to nil. After restarting Firefox CPU usage may or may not go back up depending upon whether it tries to continue the previous task that was locking it up.
It did not do this with Firefox 3.6 but then again it didn't happen immediately after updating to 9.0.1 either.100% CPU usage occurred most often toward the end of the working day when busy trying to print on-line postage. We don't have any memory-consuming plugins but according to the knowledge base articles Firefox memory usage can gradually increase during the day even if you do nothing. It seems that may be the problem so we close and restart Firefox more often now as that usually fixes the problem. However, if we get stuck on a particular website update that causes the CPU to to go 100%, we can always start Firefox without previous tabs so the update will stop, or simply use a different browser until we have time to let the computer play games with itself.
So our workaround of restarting Firefox turns out to be the final solution (until we find something better - will post it if we do). Vic -
Problem:100 % cpu usage with tcp server dll
Hello,
I am trying to write a dll with labwindows/cvi that allows me to create a TCP Server. This dll is integrated in labview.I created this Dll with example provides by Labwindows/cvi(rtserver.dll).
Description of my problem: when i execute this dll in a "While Loop" in labview,the TCp server wait a connection and 100% cpu usage occurs. However when a client is connect to the server,the CPU is normaly used because the program stop when he meets the timeout of the tcpread() function. I would like to know how i could limit CPU usage when the server is awaiting a client in the labview "While loop".
I know I could use a DELAY() to limit Cpu usage ,but I would like to know if there are any others solutions.
thank you.i dont know your exact application, but i generally use Q to transfer data to TCP loop in my prgram it helps me in two ways.
1. it automatically restricts the iteration when ther is no data (Less CPU Usage, Less Unnecessary Trafic)
2. Q can eliminate problems arising due to non synchronization of loop
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog -
100% CPU usage with XP Cooler from PCAlert4
Any idea why I would be running 100% cpu usage when running XP Cooler from PCAlert4? I noticed PC was sluggish when running it so CTRL+ALT+DEL and under performance is 100% CPU with 245MB Ram Usage. No other TSR's running - several application but under 10% CPU usage without PCAlert and XP Cooler.
I was also wondering if anyone had any ideas on the video? I have the K7N2G with 768MB DDR PC 2100 (3x256) XP2200+ 266FSB running 1804MHz - Maxtor 30GB 7200RPM - 350W PSU (raidmax - yea yea I know, dont say a word though LOL) on board video and here is the problem - graphics are great, but they get choppy - running NFS HotPursuit 2 at 32bit 800x600 (doesnt seem to matter even when running 16bit 640x480still does it.) what setting am I missing? Thanks in advance.Deathstalker (Richard),
I did what you suggest in memory management and also changed out the mem on the board - it did make a difference, not as much as I had hoped, but it did.
Raven,
I have used Fraps in the past, forgot about it, but went ahead and downloaded it to get a better look.
To the Both of you,
Thanks so much for your replies, sometimes it just takes someone outside looking in to see the things overlooked. But I went ahead and also ran all of the latest updates for the board (semi new system and I only installed with the CD that came with the Mobo) and everything is running better than expected. Thanks again for your thoughts - keep 'em flowin, it's amazing whom we could help. Take care.
Don -
when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hi!
Since the last update to KDE 4.2.2 plasma causes all of the PCs that run with Archlinux and KDE to raise my CPU usage to 100%.
It's always caused by plasma and did not happen before with version 4.2.1
Does anyone have the same experience? How can I fix this?
It's very annoying especially on the Laptops and Netbooks I'm running with KDE....
Or should I file a bug report or am I the only one experiencing this?Sorry for the thread necromancy, but I have the same problem.
At first there was no problems. I had installed kdemod to test it after spending long time with fluxbox and gtk apps. At that time there were no problems. For whatever reason I decided to reinstall Arch and put only KDEmod on it.
Hellooo plasma hogging the cpu. I have no calendar plasmoid. I have no plasmoids on the desktop at all. There are couple of them on the taskbar:
kmenu (or whatever it is called), stasks, systray, pager, digital clock.
The digital clock has a calendar when I click it. Testing with no digital clock plasmoid right now.
A full clean reinstall of kde mod didn't help, either. Did anyone found the source of the hogging? -
Spreadsheet functions causing 100% CPU usage
Running ColdFusion Enterprise 9,0,0,251028 with JVM 1.6.0_14 on a Windows 2003 server. I am finding that when using <cfspreadsheet> and the spreadsheet functions to build a spreadsheet the server CPU maxes out at 100% while the spreadsheet object is being built. The spreadsheet is not overly large or complex: 10-15 columns and 400-500 rows. This behavior is consistent - it happens every time, even when building a simple spreadsheet with 1 column and a few rows. Is anyone else experiencing this? Is it a known problem with a fix? Thank you.
Michael Mongeau
Stratus TechnologiesI was able to root cause the excessive CPU usage to a single-CPU virtual machine. When I ran the same code on dual-CPU virtual machines the CPU usage went to 50-60% but never reached 100% and stayed there as it does on the single-CPU virtual machine. So there appears to be an issue with JRun and Apache POI on single-CPU machines. I simply had my system administrator add another CPU to the virtual machine and the problem no longer occurs.
-
Large-scale swf causes 100% CPU usage
Hi,
I've created an interactive map that loads data from XML. The
map is made from several areas (MCs, currently 16) - all positioned
in a "mega MC" that holds the map together. The JPG are loaded
externally respectively to the area MC that it belongs to.
The problem is that the Map MC (that contains all the area
MCs) is too big (around 6000X6000 Pxs) and therefore slows down the
computer significantly (The CPU reaches 100% usage). This happens
also when there's no loading of the external JPGs - meaning, I
think, that the problem is only with the "physical" size of the MC
and not its actual MB size.
I hope I was clear enough.. Would appreciate any help!
Link to mapHi,
I had a similar problem when I needed a really big area. I
think the cpu usage wasn't that bad in Flash Player 7 and 8.5 (now
9), but in Flash 8 it was really high. I decided to not move the
big MC around, only the smaller parts that where needed. I guess
the whole map is never shown completely, only parts of it, so you
can write a scroll function that determines the active MCs and only
moves those around instead of the big holder MC. To achieve this, I
added a variable to each MC that holds the position of that part in
the big MC. Then I kept track of the position of the display in the
map, and used this to decide which parts are actually displayed.
Only these MCs have to be moved when scrolling, reducing the cpu
usage a lot. When a part moves out of the display, I set its real
position to -5000, and when a new part comes into display, its
position is set from -5000 to the proper _x value so it gets
displayed.
hth,
blemmo -
SQL query against ConfigMgr DB causing 100% cpu usage on SQL server throughout day
Hi, I am hoping someone here may have an idea of what I can do to resolve this as I am not much of a SQL guy. Here is what I know. Throughout the day, monday-friday, my ConfigMgr SQL server sits at 98-100% processor usage.
Using the following query I have narrowed down the culprit of the high cpu usage throughout the day:
SELECT p.spid, p.status, p.hostname, p.loginame, p.cpu, r.start_time, r.command,
p.program_name, text
FROM sys.dm_exec_requests AS r,
master.dbo.sysprocesses AS p
CROSS APPLY sys.dm_exec_sql_text(p.sql_handle)
WHERE p.status NOT IN ('sleeping', 'background')
AND r.session_id = p.spid
Even though my knowledge of SQL is light, I believe the following output clearly defines the thread responsible for the high cpu usage. This "program_name" is present throughout the day and as long as its there, cpu usage remains at or near 100%:
The text output of the above culprit is as follows (sorry this is long):
-- Name : spDrsSummarizeSendHistory
-- Definition : SqlObjs
-- Scope : CAS_OR_PRIMARY_OR_SECONDARY
-- Object : P
-- Dependencies : <Detect>
-- Description : Summarize DrsSendHistory information into DrsSendHistorySummary
CREATE PROCEDURE spDrsSummarizeSendHistory
AS
BEGIN
SET NOCOUNT ON;
DECLARE @CurrentTime DateTime;
DECLARE @SiteCode nvarchar(3);
DECLARE @LastSummarizationTime DateTime;
DECLARE @NextSummarizationTime DateTime;
DECLARE @Interval INT; -- summarize interval in minutes
DECLARE @ReplicationID INT
DECLARE @iMaxID INT
DECLARE @iCurrentID INT
DECLARE @iBatchSize INT = 50
DECLARE @ReplicationPattern NVARCHAR(255)
DECLARE @TargetSite NVARCHAR(3);
DECLARE @TimeTable TABLE (TargetSite NVARCHAR(3), StartTime DATETIME, EndTime DATETIME, PRIMARY KEY (TargetSite, StartTime, EndTime))
DECLARE @TargetSites TABLE (SiteCode NVARCHAR(3) PRIMARY KEY)
DECLARE @ChildTargetSites TABLE (TargetSite NVARCHAR(3), LastSummarizationTime DATETIME, [Interval] INT, PRIMARY KEY (TargetSite))
DECLARE @ReplicationGroup TABLE (ID INT, ReplicationPattern NVARCHAR(255))
IF OBJECT_ID(N'TempDB..#DrsSendHistorySummary') IS NOT NULL
DROP TABLE #DrsSendHistorySummary
CREATE TABLE #DrsSendHistorySummary (ID BIGINT IDENTITY(1, 1) NOT NULL, SourceSite NVARCHAR(3), TargetSite NVARCHAR(3), ReplicationGroupID INT, SyncDataSize BIGINT, CompressedSize BIGINT, UnCompressedSize BIGINT, MessageCount INT, ChangeCount INT, SummarizationTime DATETIME, PRIMARY KEY (ID))
SET @CurrentTime = GETUTCDATE();
SET @SiteCode = dbo.fnGetSiteCode();
INSERT INTO @ReplicationGroup (ID, ReplicationPattern)
SELECT RD.ID, RD.ReplicationPattern
FROM ReplicationData RD
WHILE EXISTS (SELECT * FROM @ReplicationGroup)
BEGIN
SELECT TOP (1) @ReplicationID = ID, @ReplicationPattern = ReplicationPattern FROM @ReplicationGroup
TRUNCATE TABLE #DrsSendHistorySummary
IF (((@ReplicationPattern = N'global' OR @ReplicationPattern=N'site') AND dbo.fnIsPrimary() = 1)
OR (@ReplicationPattern = N'global_proxy' AND dbo.fnIsSecondary() = 1))
BEGIN -- when current site is child
SET @LastSummarizationTime = ISNULL(( SELECT MAX(SummarizationTime) FROM DrsSendHistorySummary WHERE SourceSite = @SiteCode AND ReplicationGroupID = @ReplicationID),
(SELECT MIN(EndTime) FROM DrsSendHistory WHERE ReplicationGroupID = @ReplicationID) );
SET @Interval = ISNULL((SELECT VALUE FROM RCMSQLCONTROLPROPERTY SCP, RCMSQLCONTROL SC
WHERE SCP.ControlID = SC.ID AND SCP.Name = N'Send History Summarize Interval' AND SC.TypeID = 3 and SC.SiteNumber = dbo.fnGetSiteNumber()), 15); -- default 15 minutes
DELETE @TargetSites
INSERT INTO @TargetSites (SiteCode)
SELECT DISTINCT SiteCode FROM DRS_MessageActivity_Send WHERE ReplicationID = @ReplicationID
IF @LastSummarizationTime IS NOT NULL AND EXISTS (SELECT * FROM @TargetSites)
BEGIN
SET @NextSummarizationTime = DATEADD( minute, DATEDIFF(minute, 0, @LastSummarizationTime)/@Interval *@Interval + @Interval, 0);
-- Summarized according to interval
DELETE @TimeTable
WHILE (@CurrentTime >= @NextSummarizationTime )
BEGIN
INSERT INTO @TimeTable (TargetSite, StartTime, EndTime)
SELECT SiteCode, @LastSummarizationTime, @NextSummarizationTime FROM @TargetSites
SET @LastSummarizationTime = @NextSummarizationTime;
SET @NextSummarizationTime = DATEADD(mi, @Interval, @NextSummarizationTime );
END
INSERT INTO #DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, CompressedSize, UnCompressedSize, MessageCount, ChangeCount, SummarizationTime)
SELECT @SiteCode, T.TargetSite, @ReplicationID, SUM(ISNULL(D.SyncDataSize, 0)), SUM(ISNULL(D.CompressedSize, 0)), SUM(ISNULL(D.UnCompressedSize, 0)), SUM(ISNULL(D.MessageCount, 0)), SUM(ISNULL(ChangeCount, 0)), T.EndTime
FROM DrsSendHistory D RIGHT JOIN @TimeTable T ON D.EndTime >= T.StartTime AND D.EndTime < T.EndTime AND ReplicationGroupID = @ReplicationID AND T.TargetSite = D.TargetSite
GROUP BY T.TargetSite, T.StartTime, T.EndTime;
END
END
ELSE IF ((@ReplicationPattern = N'global' AND dbo.fnIsCAS() = 1)
OR (@ReplicationPattern = N'global_proxy' AND dbo.fnIsPrimary() = 1))
BEGIN -- when current site is parent
DELETE @ChildTargetSites
INSERT INTO @ChildTargetSites(TargetSite, LastSummarizationTime, [Interval])
SELECT DISTINCT(DSH.SiteCode),
ISNULL(( SELECT MAX(SummarizationTime) FROM DrsSendHistorySummary WHERE SourceSite = @SiteCode AND ReplicationGroupID = @ReplicationID AND TargetSite=DSH.SiteCode),
(SELECT MIN(EndTime) FROM DrsSendHistory WHERE ReplicationGroupID = @ReplicationID) ) AS LastSummarizeTime,
ISNULL((SELECT VALUE FROM RCMSQLCONTROLPROPERTY SCP, RCMSQLCONTROL SC WHERE SCP.ControlID = SC.ID AND SCP.Name = N'Send History Summarize Interval' AND SC.TypeID = 3 and SC.SiteNumber = dbo.fnGetSiteNumberBySiteCode(DSH.SiteCode)), 15) AS Interval
FROM DRS_MessageActivity_Send DSH WHERE DSH.ReplicationID = @ReplicationID
GROUP BY DSH.SiteCode;
DELETE @TimeTable
WHILE EXISTS (SELECT * FROM @ChildTargetSites)
BEGIN
SELECT TOP (1) @TargetSite = TargetSite, @LastSummarizationTime = LastSummarizationTime, @Interval = Interval FROM @ChildTargetSites
SET @NextSummarizationTime = DATEADD( minute, DATEDIFF(minute, 0, @LastSummarizationTime)/@Interval *@Interval + @Interval, 0);
-- Summarized according to interval
WHILE (@CurrentTime >= @NextSummarizationTime )
BEGIN
INSERT INTO @TimeTable (TargetSite, StartTime, EndTime)
SELECT @TargetSite, @LastSummarizationTime, @NextSummarizationTime
SET @LastSummarizationTime = @NextSummarizationTime;
SET @NextSummarizationTime = DATEADD(mi, @Interval, @NextSummarizationTime );
END
DELETE @ChildTargetSites WHERE TargetSite = @TargetSite
END;
INSERT INTO #DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, CompressedSize, UnCompressedSize, MessageCount, ChangeCount, SummarizationTime)
SELECT @SiteCode, T.TargetSite, @ReplicationID, SUM(ISNULL(D.SyncDataSize, 0)), SUM(ISNULL(D.CompressedSize, 0)), SUM(ISNULL(D.UnCompressedSize, 0)), SUM(ISNULL(D.MessageCount, 0)), SUM(ISNULL(D.ChangeCount, 0)), @NextSummarizationTime
FROM DrsSendHistory D RIGHT JOIN @TimeTable T ON D.EndTime >= T.StartTime AND D.EndTime < T.EndTime AND ReplicationGroupID = @ReplicationID AND T.TargetSite = D.TargetSite
GROUP BY T.TargetSite, T.StartTime, T.EndTime;
END;
SELECT @iMaxID = MAX(ID), @iCurrentID = 0 FROM #DrsSendHistorySummary
-- BATCH INSERT TO REAL TABLE
WHILE (@iCurrentID < @iMaxID)
BEGIN
INSERT INTO DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, MessageCount, ChangeCount, SummarizationTime)
SELECT SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, MessageCount, ChangeCount, SummarizationTime
FROM #DrsSendHistorySummary WHERE ID > @iCurrentID AND ID <= (@iCurrentID + @iBatchSize)
SET @iCurrentID = @iCurrentID + @iBatchSize
END
TRUNCATE TABLE #DrsSendHistorySummary
DELETE @ReplicationGroup WHERE ID = @ReplicationID
END
END
If anyone has any experience with this issue or anything similar and might be able to point me in the right direction, any responses would be greatly appreciated. Thanks for reading!Normally, this summary job every few mins which only summarize last few mins sending history. If the job was not running for long time, the first time, this sproc will summarize a lot more data than normal. So it could fail which will make things worse and
worse over time.
If sending summary data is not a big concern here, you can manually insert a dummy row with most recent time as Summarizationtime, so that, when summary job kicks in next time, it will only summary short interval data.
DrsSendHistory is that the table records every sending on every group. This table is one of the key of replication logic. For your environment, on primary site, it could have up to 24(hrs) * 60 (mins) / 2 (sync interval) * 36(secondary sites) records per
day for Secondary_Site_Replication_Configuration group and 24 * 60 / 5 * 22 records for Secondary Site Data.
Umair Khan | http://blogs.technet.com/umairkhan
Hi Umair,
Thank you for the reply. My plan was to go ahead with your suggestions but what I tried first was to get my VM guy to give the SQL server access to more CPU resources. We had already configured it with what would have seemed to be plenty, as per Microsoft's
sizing requirements, but I figured it couldn't hurt to rule out - he gave the SQL server access to a huge portion of the host processing power and since then CPU usage on the server has NOT been an issue.
It would appear that the large amounts of secondary sites we have just simply put a lot of stress on the SQL server with out of the box replication settings. Since the entire VM host is for System Center only, and our other System Center servers are using
very little resources, this solution has ended up being valid.
Thanks again for everyone's help with this. -
Tab selection property causing 100% CPU usage
Hi,
I've having some trouble with using property nodes to tab selection. After 1-2 hours the CPU usage is 100%. The VI is attached. I'm using LV 6.0.2 on win2000. Does anyone have a clue of what's happening?
Attachments:
tab_selector_property.vi 22 KBEvery time the while loop executes, you open *new* pages reference array. Whitout closing them, you quickly fill the memory and hog the computer usage. As in the modified VI attached, get the references only once outside the while loop and reuse them. Close any reference after use. As much as possible, you shoud use the control terminal to read its value instead of reading the value property.
LabVIEW, C'est LabVIEW
Attachments:
tab_selector_property.vi 25 KB -
I upgrade to iTunes 10.4.0.80. Since then iTunes uses 50% of the CPU and Mobile uses 50% CPU. I let it run for hours and the CPU usage stayed at 100%. The phone will partially sync but takes a very long time. This was not a problem before the iTunes upgrade. I am running iTunes on Windows XP professional SP3. It does not matter if the phone is connected to the USB port of the PC. When iTunes starts it runs the CPU at 100%.
Yes! I am not the only one with this problem. Ever since the latest iTunes update, the CPU runs up to 100% using both the mobiledevice and itunes itself. The store won't work either! I'm also on Windows XP. I too have tried everything I can think of but nothing has helped. I really hope they get an update out with fixes soon. This is really annoying!!
-
hi everybody,
i wonder if anybody can help me with this rather odd issue.
i have been using my Zen Touch 20GB (enjoyable little gadget) for quite a while now, uploading mp3's and wma's without any problems (roughly 6GB).
over the last few weeks i had more and more issues with my system freezing and the task manager showing the process CTPdeSrv.exe taking up 00% of my CPU usage. the only possibility to continue working on my PC was to end the process. i found the hint in your knowledge base to perform a disk cleanup (SID 6228) but the problem persisted. i then deleted and reinstalled the Creative MediaSource Player that came with the Zen Touch. problem persisted. i upgraded to v3.30.2. problem persisted. after spending an afternoon deleting/installing different combinations of your software and narrowing down the possibilities i discovered that i only get this problem when i try to rip a CD with MediaSource to wma, chosing mp3's everything works fine. the same problem (00% CPU usage) occurs when i try to access the plugged in Zen with MediaSource, Winamp, Realplayer or even Windows Explorer. so it must be a player thing.
i have interchanged the used USB2.0-ports as well. i also tried all the suggested steps under point "I have connection problems with my Zen, what can I do?" @ nomadness.net.
i haven't reloaded the OS on my Zen cos i'm afraid when i delete it and attempt to copy the downloaded firmware v.0.03, my Zen will produce the same error and i loose my music plus can't use the player anymore.
i'd appreciate some help very much.
cheers.
WinXP SP2, Mobile AMD Athlon XP 2400+, 52MB RAM
Zen Touch with firmware v.0.03
Creative MediaSource v3.30.2
PS: somebody had a similar problem (user Samsuri posted 09-05-05), but the suggested solution (reinstalling the SW) didn't help at allI had the same problem that you experienced. I also was unable to get any cd infor from Gracenote. I haven't had my Zen Touch very long (bought it on ebay) but I had added several songs from my library and all worked great. Then all of a sudden the other day I was getting 00% cpu useage and the cd info problem?!! I figured that seeing it was new to me anyway I'd update the firmware and go to the Explorer for PlaysForSure version. The upgrade was a breeze and my problem with the 00% cpu has disappeared so far and cd info works again. All is good, but... When I boot the machine I automatically go to the system 32 folder? No idea why and who knows if you'll get the same problem. I just close that after boot and everything seems to be working fine. I plan to look into the system 32 situation and that's actually why I joined this forum. If anyone has an answer for me on that I'd appreciate it.
Thanks -
Why Xcode 4 causes 100% cpu usage?
Dear all,
I have been annoyed by the high cpu usage of Xcode 4.0.2 when editing code. It is burning my MacBook! I think this may be related to the dynamic code checking. Any idea?
Cheers,
Lidynamic checking?
Do you mean Instruments...?
AFAIK, it's always hungry, hungry hippo - the best defense right now is to use Xcode 3.2.6.
Xcode 4 isn't 'required' just yet, but it might happen later in the year with the next OS, which may help tame it a bit.
Maybe you are looking for
-
Video Problem: A & B connect, B & C connect BUT C & A can NOT connect
While trying to debug the connection between A & C we discovered that A and C can both make video connections to B but not with each other. What might cause this problem? A & B are both MacBook Pros C is an old 12' iBook. While we like to do 3 ways a
-
The last time I updated my Firefox, I received a dialog box instructing me to update my Flash player, which I did immediately. When I then visited sites requiring a flash player, all the sites crashed and I was unable to view the contents of these si
-
Can I have too many photos in an iPhoto library?
-
Cannot print a web page that prints fine in IE9
I'm trying to print a web page in Firefox, but when I do the print preview it has web info at the top of the page but the rest is blank, the second page displays just fine, then all the other pages behind it are completely blank. If I try to print a
-
I've had this thing for about 6 months i guess. Bought it to use on a motorcycle but that didn't work out so now i use it as a personal recorder. In this context it will sometimes not be used for a couple weeks or more. The problem is every time i pu