Small AirPrint printer that still prints 8.5x11 sheets

Hi All,
I am looking for a printer with the smallest foot print possible that is an airprinter (so that I can print from my iPad), but it still needs to be able to print 8.5 x 11 size paper. Please point me in the right direction! I'm also not looking to spend a fortune, under $150 would be appreciated as I am just going to use it to print receipts/invoices.
Thanks!

Pick a printer from this list:
List of supported AirPrinters.
http://support.apple.com/kb/HT4356
Robert

Similar Messages

Is there a printer that will print Continuous Paper

Does HP offer a printer that will print continuous paper for our business? I am looking for something under $1,000.

I don't think that HP offers any small printers that print on continous stationery, although they do sell a number of plotter printers (but these may be much too slow for what you require?).
Other companies (e.g. http://www.psi-laserdrucker.de/?lang=en&cat=1&PHPSESSID=26a30a94d457d0ac2ffa3bee4a884b5b ) do sell laser printers that print on fanfold continous stationery, although they may not be within your $1000 budget.

HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.

HP Printer that will print on 10 point synthetic paper

Hello,
I'm looking for a printer that will print on 10 point synthetic paper. This paper is resistant to absorbing water and fading in the sun. (greenhouse application)
Does HP have a printer that will print on paper like this that uses waterproof toner or ink?
Thank you,
Sheldon

I don't know of any printers that can handle that size. How does the card stock come? As individual cards or grouped together in larger sheets that you cut apart or tear apart?
Can your printer successfully grab and move those cards thru it? If so create the card design in the upper left hand corner of an 8.5 x 11 layout and print to the borderless letter size paper size selection for you printer. For that you would need a 3rd party image editor that supports layers or Pages, which will do the job nicely.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free

IPad 3 has stopped printing to my AirPrint printer iPhone still prints

My iPad 3 has stopped printing to my AirPrint printer. My iPhone still prints things ok. It worked before and it shows the printer as available when I send to print and says it is contacting the printer then preparing then just nothing happens. Nothing has changed with my network and my partners iPad 3 still prints stuff fine. Help!

Reboot the iPad 3.
If it still doesn't work, reboot the router.

HP Officejet Pro 8100 unable to communicate with printer, but still prints

Hello,
I have an Officejet Pro 8100 connected to a Windows XP SP3 computer via USB.
When installing I downloaded the latest drivers off the HP webiste and followed the instructions for installing the printer and connecting via USB. While installing I only installed the basic print driver.
The printer appeared to install correctly.
When printing (test page, or from other programs such as Word or Excell), the printer will actually print the requested document, however, an error box will pop up saying "Unable to communicate with printer". The only option on the error box is the cancel the current print job.
Before cancelling the print job, even though the printer actually printed the document, I can still see the document in the print queue until I click the "Cancel" button on the error box.
I have deleted the printer, uninstalled and reinstalled twice, but the issue persists.
Any ideas?

Hi aconway,
I hate to hear you are having issues. This could be caused by a port issue, bad USB cable/hub/switch connection, or possibly a spooler or driver issue. Click Here to run the print and scan doctor (select OS, then click the + sign beside utility diagnostic tools, click the download button next to print and scan doctor). If you would like to learn more about your product, Click Here.
Suggestions:
1. Run the print and scan doctor to identify any port issues
2. Connect unit directly to PC with new USB cable that meets specifications(no longer than 4-6ft).
3. Remove any hubs or switches if being used.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Non printing items still printing

Hi.
I have created in Indesign a 8 page pdf with hyperlinks (as a nav bar on each page)
I have set the colourful headers and footers on each page as non printing.
I am trying to create a PDF that will be colourful on screen, but when the browser goes to print it out the headers and footers will not output.
trouble is, they are still printing
I have tried exporting as smallest file/ high quality print and non printing options are ticked (otherwise the headers dont appear at all on screen)
can this be done? if so, how?
I have attached a sample file it has two objects in it:
1) some text
2) a magenta rectangle place over the text
I am trying to acheive a pint rectangle on screen, and when the pdf is printed, no rectangle just text.

You can't add a hyperlink to a button - but you can Convert something to a button and then give it a URL to go to when clicked.
Basically you don't select the button and choose a hyperlink destionation the way you would with text, that won't work.
Here's what to do.
Select the frame that will be the button.
Go to Window>Interactive>States
In the fly menu for the States panel (top right of panel) click the arrow pointing down, and a sub menu pops out.
Go to Button Options and to the tab that says "Behaviors"
Event: Mouse Down
Behavior: Go to URL
URL: (insert the url)
And then DON'T FORGET TO CLICK ADD at the bottom of the dialog box.
And that's it. When you make the pdf make sure you inlcude interactive and bookmarks and everything else you need.

A printer that will print on 2.25 by 3 inch paper? (Playing cards)

I am trying to print some personalized playing cards (I have some blank playing cards!). My printer only prints down to 4x6.
Does anyone know a photo printer that handles paper down to that size? I have found printers specialized for 2x3 inch name tags but they only print 2x3.
Thanks.

I don't know of any printers that can handle that size. How does the card stock come? As individual cards or grouped together in larger sheets that you cut apart or tear apart?
Can your printer successfully grab and move those cards thru it? If so create the card design in the upper left hand corner of an 8.5 x 11 layout and print to the borderless letter size paper size selection for you printer. For that you would need a 3rd party image editor that supports layers or Pages, which will do the job nicely.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free

Use hp all in one printer that is printing top half of page

Use windows 7 64bit and printer is HP PSC 1410 all in one. Printer was functioning fine until today. Purchased new pc a week ago and printer worked fine until today.

Hi Pinnah,
There could be a lot of different things that could cause this issue. Try the steps below and let us know the results
1. Shut down the computer the computer.
2. Power off the printer, wait 60 secs.
3. Power on the printer
4. Power on the computer
5. Open or create a new text document and fill up the first page.
6. Print the document.
If it was successful great! If not, did you get any error messages? Are there any LED lights blinking on the printer?
Try using the Print Diagnostic Utility below. Although it is not meant to resolve this issue, it might be able to give us some clues on what could be causing the problem.
Using the HP Print Diagnostic Utility
Let us know the results.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

2008 R2 Printer Event ID 372 - Print Job Still Prints I Can't Stop These Errors From Occuring

I keep getting the following error 372 on one of my DC's that runs the network printers. As it says on the bottom of the error the page prints just fine but I can't get it to stop and I can't find a reason for this to happen. I have 5 identical
servers in a site based forest and this is the only server I have getting these errors. I can not find any difference in software versions, configs or security. Everything is setup using x86/64 drivers and is deployed via GPO.
The document Untitled1, owned by wa-material, failed to print on printer wa-rec1-053. Try to print the document again, or restart the print spooler.
Data type: IMF.
Size of the spool file in bytes: 34080.
Number of bytes printed: 34080.
Total number of pages in the document: 1.
Number of pages printed: 0.
Client computer: WA-DOCK. Win32 error code returned by the print processor: 0. The operation completed successfully.
This same server also had an odd problem with access denied issues to our 2008 terminal servers. I had to use this article to give extra permissions to Domain\Users on the printer spool directory in order for it work.
http://support.microsoft.com/kb/968605/en-us

Hi,
Regarding the error you received, it can be caused by one of the following factors.
The printer is not reachable on the network
Windows cannot allocate sufficient memory
There was invalid or incomplete data received by the print spooler
A driver upgrade failed
There is a bad printer device driver
At this time, I suggest you could refer to the following article for troubleshooting.
Event ID 372 — Print Spooler Status
http://technet.microsoft.com/en-us/library/dd393167(v=ws.10).aspx
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

I have an old (read ancient) Apple Laserwriter 12/640 PS laser printer that I want to print to using my PC (running Windows 7). Suggestions?

I have an old (read ancient) Apple Laserwriter 12/640 PS laser printer - that still prints exceptionally well - that I want to print to using my PC (running Windows 7). Suggestions? While using Windows XP Pro, I used PC MacLan's version 9.01 and it worked beautifully. PC Maclan is no longer in business. Windows 7, however, doesn't even recognize any Apple printers in any of its lookups. Suggestions?

The LaserWriter 12/640 PS is a PostScript Level 2 and PCL5 printer with support for LPD (http://support.apple.com/kb/ta21876). How is the printer connected today? An external cable adapter (such as the Apple Ethernet Twisted-Pair Transceiver Model M0437) would allow Ethernet. Providing that an appropriate printer driver can be found (it may be worth checking whether a universal driver or a driver for a similar HP printer could be used), it should not be impossible to set up LPR printing under Windows 7.
Jan

HP photo printer that will work with a separate HP scanner

I need to replace an old HP printer that doesn't have Full Function capabilities with Windows 7. HP Tech Support told me they DO NOT recommend using more than one scanner per computer, so told me not to buy an All-in-One printer to use with my HP ScanJet G4050 scanner. Possible software issues in the future.
Problem: I'm having a difficult time finding a single function inkjet printer that will print quality photos and has photo black ink. It must be fully compatible with Windows 7 & 8. This has become a nightmare as it's nearly impossible to find a newer single function printer that does high quality photos. HP seems to focus on the all-in-ones that don't have the capabilities of the older Photosmarts. Such as separate photo tray, photo ink, gray ink, etc.
I currently have a Photosmart 8150 printer that does a great job on photos and has photo black as well as gray ink for printing color and black and white photos. You can't find a comparable printer like that anymore! HP needs to realize that there are a lot of customers out there looking for a good quality photo printer like their old Photosmarts of 10 years ago. HP needs to pay attention to their customers and provide support for their older photo printers AND manufacture printers with the same functions as their older models!
Suggestions on new photo printers would be appreciated. Thank you!

Yes.
http://support.apple.com/kb/ht4356
Any of the ones listed there should work.

Error message or program crashing when printing on Epson printer

In July 2008, I upgraded my computer from a MacBook to a MacBook Pro (and bought a Time Machine so that all my files are backed up regularly!) I then bought my wife a MacBook Pro in November 2008. We both used to have iBook G4s.
We have an Epson EPL-6200 Laser Printer that we print from using our Airport Express. It used to work fine printing documents from any program and printing wirelessly from the iBook G4 computers we had when we bought the printer around three years ago.
But since I have switched to a MacBook and now a MacBook Pro, I have all kinds of problems printing on the Epson EPL-6200 printer. At first, my MacBook did not print remotely at all. I had long conversations with both Apple and Epson, knowing there was a problem with the Epson driver. To top it off, the problems seemed worst with Microsoft Office, so both of them also said it was Microsoft's fault!
Now that Epson has upgraded its drivers and I have dowloaded the latest one, and switched to a MacBook Pro, I can print some files easily -- Word documents now print immediately, although I get an error message saying that the printer is not connected. But trying to print from other programs such as Firefox either takes a very long time (around 5-8 minutes for one page) or causes the program to crash.
Any ideas? The strange thing is that my wife's computer and mine are exactly the same (running Mac OS X version 10.5.6) but behave slightly differently when printing. I can print from Firefox, albeit after a long time per page, whereas if she tries to print from her computer in that program it instantly crashes.
I guess we still have driver issues with the Epson EPL-6200.
But I have looked on the Apple support forums and there seem to be a lot of printer-related issues like this. Do you guys have any suggestions? Or is there a printer that will work well with our MacBook Pros, an Airport Express and/or Time Machine (we have both) and when printing remotely?
All the best,
Alex

hey,
well, i use the below machines with the current mac os (10.5.6).
i (kind of often) had issues with the network printer epson epl-6200.
of which every issue could be resolved by myself, more or less quickly.
i.e. until the last update (10.5.6).
none of my machines is able to get anything through the network to the printer.
at least they don't get the printer to print a page.
today i spent (almost) the whole day, trying out things to get it fixed this time.
none of it worked.
just to let you know:
i can access the printer through its http-interface.
i can ping it.
it gets recognized by the printer/fax-dialog in the system-preferences.
here's what i tried so far:
i tried to install the osx driver for the epl-6200 with every single protocol that's available in osx (i.e.: Appletalk, IPP, Bonjour, EPSON (IP), etc.)
i of course tried to update the driver with the latest software available on the epson-website. and did the thing with the different protocols again.
i tried the "generic" postscript driver of osx, too.
then it was getting interesting:
i tried to get "cups" for the epl-6200. i don't want to get into details here, but to drop some names:
foomatic-rip (combined with ghostscript)
http://linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
gutenprint (doesn't have an epl-6200 driver included)
pxlmono (doesn't have an epl-6200 driver included)
to sum that up:
there are two drivers on the "openprinting"-site (foomatic). but one is (of course) the official epson driver.
but:
there is a "third-party" driver downloadable on that website.
http://openprinting.org/show_printer.cgi?recnum=Epson-EPL-6200
well, i downloaded it, installed the required additional software (foomatic + ghostscript), all very fine. i could choose it in the osx printer setup menu.
but:
my printer still won't print a single page.
the error messages i got:
other than the above post none of my programs ever crashed, or was "dead slow".
but:
the printing job got constantly stopped, i could restart it, but it was then stopped again. without any error message.
there was the same thing with the halt of the printer (also monitored in the printing cue window). i could restart it, but it would stop again. without any error message.
but i also got two decent error messages: :))
the first involved the pdftoescpage.app, either it was failing (shown in the printer cue window), or it was crashing (i got the error message in a separate window popping up). according to folks on the net this malfunction involved user permissions, so i to set up the "right" permissions (giving everybody the right to do anything (rwx) - i know i shouldn't have :)) ). but it didn't help. still crashing or failing.
the second decent error message, finally:
"double free" - what that meant, i cannot tell.
conclusion:
i don't know. :))
required action:
i will await the next osx update, and hope it'll be fixed then. :))
good night, y'all
p.s.: ahh, if anybody knows anything i didn't and should try. please drop a line. thx

My Photosmart printer no longer prints with my iPad or iphone.

My Photosmart printer no longer prints with my iPad or iphone. I have reinstalled both Apps but although they recognise the printer , no printing ensues. The printer is still printing wirelssly with my PC.
Thanks any helpers out there

...not sure which of the three possible apps you have, but here is the go-to place to troubleshoot any issues with them http://www8.hp.com/ca/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Printing Borderless and Multiple Pages per Sheet (PDF)

Anyway to do this? I have a thousand page pdf doc that I need to print out but want to maximize viewing area. Obviously individually cropping pages is out of the question.

You may be right about Adobe Reader. However in Adobe Acrobat X Pro you can simply choose Print>[select booklet button] and choose your options there. You will see a preview. Because of the ratio between 8.5x11 and 2-up 8.5x11 you will have a "letterbox" white border on the top and bottom of your pages but you will be able to print with no gutter and no margin on the edges. Your printer must allow for borderless printing and you must have enough ink. You will have to have a high-end printer that can print borderless if it is a laser printer but most ink-jet/photo printers can print borderless. However the downside is that you will have to replace your inks quite frequently and you will have to print duplex probably manually. You will want a paper weight sufficiently heavy enough to accomodate printing on both sides because otherwise the opposite page will bleed through making it difficult to read.

Small AirPrint printer that still prints 8.5x11 sheets

Similar Messages

Maybe you are looking for