Small Black Vertical Lines follow my mouse pointer AND surround all ICONS

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS on my desktop. I just turned on my computer and it showed like this. I already tested my monitor and it's not the monitor.
See a picture of my problem here on my me gallery:
http://gallery.me.com/egarfias/100024
Looking at websites, it's fine the display but any icons and my pointer and things that move have these lines following! Looking at VIDEO, it's the picture is full of white and black lines though you can see the video just fine.
Any ideas? Thank you!!

I am in Safe Mode now: This is the weirdest thing: A bit from column A AND B:
The display is perfect EXCEPT for two parallel lines of 17, 3 millimeter-long black lines that follow the pointer everywhere it goes.
Get this: my current display is 1024x768, but when I change it to 640x480, the pointer and everything is perfect! (of course, I can only see a fraction of my desktop)
But then again... when I zoom in and out holding down control (in 640x480) the pointer lines appear again, but less lines. They disappear when I re-reset it to 640.
Strange.
But yeah, safe mode is NEAR perfect with the except of the cursor lines. I can screen grab my cursor though to show...

Similar Messages

Modal dialog limiting the mouse pointer and blocking all application

I wanted to create a modal dialog that blocks all application in my desktop. Only password field be present and exits only if correct password is typed. I also wanted to limit the mouse pointer within the window of the modal dialog. Will that be possible? i have read modality feature of Mustang(beta) and notes there that system modality is not included. Can anybody there give me an idea how to do tricks on blocking all applications of the desktop? I will be much grateful to anybody who could solve this problem. Thnx in advance...

tnx Sarcommand ..i give up on that, i understand the risk if that feature is included..
all i wanted is to make an internet cafe client/server that blocks the client's pc interaction if log time is reached.blocking only the keyboard and mouse.
i have seen so many softwares sets the cursor position within the dialog bounding box only with user and password there. though my other application runs the mouse is still captured on the dialog even the dialog lost focus.
if that would not be possible I'll just send notification to the client, a dialog that does not block any application.
now, im going to try if the client can do som action whenever the server sends alert if the client java app is not the focus. i will post next time what hapens.but if you tried already, if u dont mind posting it so others could know it also..
tnx so much Sarcommand..

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?
thanks Karl

Clean the small glass strip under the ADF, also clean the withe scanner backing and white strip under the ADF.
I was an HP employee.
Kudos are appreciated if I have helped you.

White and black vertical lines

I Have the iPhone 5. It has been in a case since the day I bought it. It is 2 months out of warranty and I got white and black vertical lines while I was laying in bed. My friend tried checking my screen and replaced it with a working screen and it did the same thing so it wasn't the screen. Took my phone to Apple they said it's the screen and I have to pay $130 to fix it even with it out of warranty..... Lady standing next to me had the same problem they plugged it in fixed it and she was on her way with it. What is wrong with my phone? What should I do?

and one more thing, itunes cannot read my device i did that for 20-30 sec but it won't turn on

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Black Vertical lines and a thin yellow haze in the center of my screen

I can't seem to find the answer to this question, or one that my be a solution. I recently discovered black vertical lines and a yellow haze in the center of my ipod nano 4GB.
One discussion said I should put it to sleep for 4 hours and the lines will erase. That didn't work. What's the common cause to this and how can I fix it? And could it be because I converted it from a mac to windows itunes?

Try giving it a reset. hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that fixes it.

Actual solutions for C6380 black vertical lines ?

When copying or scanning on my C6380 all-in-one, black vertical lines that are generated from the hinge-side of the glass appear on my documents. While this problem has been posted and re-posted over and over again the only responses I've found have been to clean the glass and inside of the cover. I have done this several times. I have also reinstalled the driver and unplugged the power cable from the both the printer itself and the outlet. The lines do not occur when printing Pages or Numbers or web-generated documents. Any suggestions?
I have a hunch that the only solution is to put up with the lines or but a new copier/scanner.

You can give a try to the Troubleshooting steps in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02169248&cc=us&lc=en&dlc=en&product=3560280&tmp...
Resets should work. Seems like a scanner bulb issue.
I work for HP but my posts and replies are my own.
-Michael

A black box which follows my screen pointer has appeared. Must be a background item? Any suggestions?

A black box which follows my screen pointer has appeared. Must be a background item? Any suggestions?pointer

Hit Cmd-F5 (not F-5)
Or in System Prefs>Universal Access, uncheck Enable access for assistive devices.
or, if that doesn't do it, reverse the steps in this article
http://www.ehow.com/how_12135607_make-box-around-cursor-mac.html

Mouse pointer and keyboard out of control

The mouse pointer and keyboard can not control. Only powe button can use.
The system is still running. The clock and battery indicator is still working
how to solve?

Not a solution, I'm afraid, just concurring -- I am experiencing a very similar problem with the keyboard, but not the mouse pointer. I get an intermittent temporary freeze lasting maybe ten seconds, after which it recovers. Although I suspect waking the machine from sleep may set these off, I couldn't swear to it, and I have experienced several of these sequentially, maybe five minutes apart.

How to delete the line between the last point and first point?

How to delete the line between the last point and first point?
I want to draw a curve many times, from first point to the end point. and redraw from first point to the end point.But I hope update point by point. but between the end point and the first point, there is a line. How to delete the line?
the code is:
CNiReal64Vector plotData(50);
m_graph.ChartLength = 50;
//m_graph.ClearData();
for (int j = 0; j < 2; j++)
for (int i=0; i<50; i++)
plotData[i] = ((double)rand()/(double)RAND_MAX)*6 + 4;
m_graph.GetPlots().Item("Plot-1").ChartXY(i, plotData[i]);
Sleep(100);
Attachments:
20150605142608.png ‏31 KB

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Bluetooth Mouse Pointer and Clicker Freezing

Hello,
I bought a Genius Navigator Mouse model 905BT and connected to my MacAir 11.6". I noticed that my mouse pointer and clicker froze every 15 seconds. I tried this same mouse connecting to my old Macbook 13 inch (version 10.6.2) and on my Windows Laptop with no problems encountered. There were no notifications that the mouse is disconnected and reconnected. It just freezes when I am currently using it. The batteries are new.
Regards
Ed

Hi,
It has been fixed when I upgraded the Mac OS to 10.6.5 which just released today.

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

What are the performance Preferences?

An exclamation point and the battery icon??????????

when i connected my ipod to computer.....it was showed the an exclamation point and the battery icon and i can't connect it either charge........if u know why........please help me...............

See if anything on this page helps: "iPod shows a folder icon with exclamation point when you turn it on" http://docs.info.apple.com/article.html?artnum=61003

4 lines following my mouse & odd screen colours

I have a G3 running 9.2 and at startup the mouse cursor has 4 vertical lines beside it about 1" long and follow it around. Also the colours on the screen are odd. It is not the monitor as it works fine on my other G3. Any ideas?

I have a G3 running 9.2 and at startup the mouse cursor has 4 vertical lines beside it about 1" long and follow it around. Also the colours on the screen are odd. It is not the monitor as it works fine on my other G3. Any ideas?

After upgrade I have a black display showing only the mouse pointer

I just installed the Windows 10 Technical Preview on my Lenovo W540 laptop. The installation appeared to to go just fine and I did not see anything that should cause any issues. Now that it is complete, my display is black and I see the mouse
pointer on the screen. I can move the mouse just fine, but nothing else will display when moving the mouse. If I hit <ctrl><alt><del> then our domain banner page will flash on the display but I can't hit the OK button to get to
my login prompt. Has anyone seen this before? What can I do to resolve this issue? Any suggestions out there?
Wade Preston

I just connected remotely to the Applicaiton log files via computer management. I see that the LogonUI.exe application is failing. I have attached the log for this error. Anyone know what to do with this error or how to fix it?
Here is the log:
Log Name: Application
Source: Application Error
Date: 10/2/2014 11:07:55 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: BF03500KL.baldwin.corp
Description:
Faulting application name: LogonUI.exe, version: 6.4.9841.0, time stamp: 0x5413b9b7
Faulting module name: MSVCR100.dll, version: 10.0.40219.1, time stamp: 0x4d5f034a
Exception code: 0xc0000005
Fault offset: 0x000000000003645a
Faulting process id: 0x1244
Faulting application start time: 0x01cfde5b066a2697
Faulting application path: C:\WINDOWS\system32\LogonUI.exe
Faulting module path: C:\WINDOWS\SYSTEM32\MSVCR100.dll
Report Id: 44725ffb-4a4e-11e4-95d5-54ee7501cb36
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-02T16:07:55.000000000Z" />
<EventRecordID>48596</EventRecordID>
<Channel>Application</Channel>
<Computer>BF03500KL.baldwin.corp</Computer>
<Security />
</System>
<EventData>
<Data>LogonUI.exe</Data>
<Data>6.4.9841.0</Data>
<Data>5413b9b7</Data>
<Data>MSVCR100.dll</Data>
<Data>10.0.40219.1</Data>
<Data>4d5f034a</Data>
<Data>c0000005</Data>
<Data>000000000003645a</Data>
<Data>1244</Data>
<Data>01cfde5b066a2697</Data>
<Data>C:\WINDOWS\system32\LogonUI.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\MSVCR100.dll</Data>
<Data>44725ffb-4a4e-11e4-95d5-54ee7501cb36</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Wade Preston

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS

Similar Messages

Maybe you are looking for