Small Branch Aware Quiz Returning NaN Results

I'm trying to use the Branch Aware function to constuct a quiz for 3 different tracks that people can choose. My real file is not working, so I created a small example, and it's not working either. Here is a screenshot of the branching view to give a sense for the flow:
When I hit the quiz for branch 1, I answer it correctly, and the quiz results show this:
As far as I can tell, it's the same for all three branches.
Feel free to download the file and tell me where I'm going wrong. This is just my first time, so I'm sure there's something I've overlooked... You can find the file here: http://www.theharagans.com/captivate7/BranchingQuizTest.cptx
Many thanks in advance!

UPDATE with a REAL SOLUTION!
Okay, my intention of having a branching quiz was to have a student take 1, some, or all (their choice) of a multiple-track module, with each track having its own quiz. My flaw originated in that I had the action on the last quiz slide for each branch to go to the quiz results slide, however, if the action on the last quiz slide for a branch is to go back to the point at which a student picks which module they want, the quiz doesn't break.
What I ended up doing was creating a button on the "menu" slide that takes the student to the quiz results. That HAS to be the last action the student takes before they're done with the module. If the module in any way loops back AFTER the quiz results are displayed, the quiz breaks.
So the branching view now looks like this, and it works for taking multiple tracks in the same iteration of the training.

Similar Messages

Why is my results slide blank when branch aware selected?

Hi All.
I'm hoping that someone can help me.
I've created a relatively simple e-Learning course using Captivate 7, that has the following structure:
Part One Learning, Part One Assessment
Part Two Learning, Part Two Assessment
Part Three Learning, Part Three Assessment
Within each of the short assessments there are two alternatives to each question (so the learner has two chances to get a question right). So learner is presented with Q1, if they get that wrong they are presented with Q1b if they get it right they jump straight to slide Q2.
The module was set to 'branch aware' so that the results slide displays the correct percentages and ascertains if the learners has passed/failed based on the number of questions asked.
This all worked ok, but then we wanted to add some more functionality to the 'retake quiz option' which was as follows:
- 1st attempt the learners completes Part one learning, Part one assessment, Part two learning, Part two assessment, Part three learning, part three assessment (i.e the whole module).
If they don't get the pass mark then on the...
- 2nd attempt the learner only gets presented with each of the assessments (nb not Part One Learning, Part Two Learning, Part Three Learning split just the question slides).
If they don't get the pass mark then on the...
- 3rd attempt they go through the entire module again (Part one learning, Part one assessment, Part two learning, Part two assessment, Part three learning, part three assessment).
To achieve this I have set up the following advanced actions:
- On Results slide execute the 'success script' as per the attached.
Then on the slides immediately after the assessment questions I've added the following advanced actions on Enter to say that on the second quiz attempt go straight to the next assessment question.
The problem is that after adding these scripts then the results screen is blank.
I have set up the same advanced actions on a different project and it works fine, but that didn't need to have branch aware checked so I'm wondering if that is the root of the problem, but I'm not sure how to fix it.
Can anyone help identify where I may have gone wrong?
Many thanks
Lisa

Hi Rod
Thanks for your reply.
Just to clarify, there is only one quiz it's just split up into parts with 'learning' between questions (so there are three questions in part one, three in part two etc) and the answers to all questions answered should appear in the quiz results which is at the end of the module.
I was aware that the branch aware normally only shows the user those same quiz questions on their subsequent attempts and that is fine and works as I'd expect.
However if you think that the advanced actions skipping 'non question slides' might be confusing it I'll have to think of an alternative I guess.
Thanks
Lisa

Query returning zero results for yesterdays same hour

I have the following query:
SELECT
d_dtm,
BTS_ID,
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END AS "LASTATT",
sum(V_ATT_CNT) as "V_ATT_CNT",
CASE WHEN D_DTM = D_DTM
THEN sum(V_ATT_CNT)
END AS "ATT"
FROM
DMSN.DS3R_FH_1XRTT_FA_LVL_KPI
WHERE
to_date(D_DTM, 'DD/MM/yyyy') >= (SELECT TO_DATE(max(D_DTM),'DD/MM/YYYY') FROM DMSN.DS3R_FH_1XRTT_FA_LVL_KPI)-2
GROUP BY
d_dtm,
BTS_ID
having
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END > 0
But it is not returning any results because of the "having" clause. I know it should return results because all I want it to do is in one column have the V_ATT for the current time period, and in the 2nd column, have the V_ATT 24 hours ago. I've checked the data and I should get results back but can't seem to figure out why this is not working...
Edited by: k1ng87 on Apr 22, 2013 1:03 PM

Hi,
k1ng87 wrote:
I have the following query:
SELECT
d_dtm,
BTS_ID,
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END AS "LASTATT",
...You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (including, but not limited to, code) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
That's just one of many useful things found in the forum FAQ {message:id=9360002}
But it is not returning any results because of the "having" clause. You're right:HAVING CASE
     WHEN d_dtm = (d_dtm - 24/24)
     THEN SUM (v_att_cnt)
     END > 0
Whatever d_dtm is, it's not d_dtm - 24/24, so the WHEN condition will never be TRUE. That means the CASE expression will always return NULL, and NULL is not greater than 0, so the HAVING condition will never be TRUE.
k1ng87 wrote:
confused on what I'm missing here...I'm using version 11g, not sure if that matters for this ? though....There is no version 11f or 11h, so it's kind of silly to say you're using 11g. Why not give your actual version number, like 11.2.0.2.0? Sometimes, the part after 11 makes a huge difference.
But probably not in this case, as you said.   What's more important is for you to post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that sample data.
No kidding; see the forum FAQ {message:id=9360002}.

Simulating small branch office in lab network

Hi,
I have to setup what seems to be a very basic configuration, but it doesn't work.
In our lab there is a cluster of switches with a 3550 that does all the routing for vlans.
I need to simulate a sort of a small branch office that has one connection
to the outside world (the lab network).
Here is my design:
Vlan 230 (the internet)
A port on 3550 is in vlan 230 and is connected to e0/0 (172.26.230.150) on 2611 router.
e0/1 interface on a 2611 is (192.168.1.1).
A PC is connected to e0/1 (192.168.1.12).
From the router I can ping any host on vlan 230 and other vlans,
I can also ping the pc connected to e0/1.
However from the PC I can only ping 192.168.1.1(e0/1) and 172.26.230.150 (e0/0)
Below is my configuration
Thanks for your help.
R2611-1#sh run
Building configuration...
Current configuration:
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname R2611-1
ip subnet-zero
ip dhcp excluded-address 192.168.1.1 192.168.1.9
ip dhcp pool 192.168.1
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
interface Ethernet0/0
ip address 172.26.230.150 255.255.255.0
no ip directed-broadcast
no ip mroute-cache
no mop enabled
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
no ip directed-broadcast
no ip mroute-cache
ip classless
ip route 0.0.0.0 0.0.0.0 172.26.230.1
ip http server
no scheduler allocate
end

You are not performing nat on the router.
This is typically required on a box which provides internet connectivity.
Probably the other hosts on vlan 230 have no route back to the pc on 192.168.1.1
Configuring nat on the router will resolve this problem.
regards,
Leo

Small branch office network

We have a small branch office (7 users) that will be moving to a building that has a Wireless Residential Gateway (Model: DPC3829). This device provides wifi for 2 other tenants on the same floor. Can we connect another wireless router to this wireless residential gateway device and create our own SSID so that we don't have to use the wifi settings that the other 2 tenants connect to?
I've attached a picture of what the back of the DPC3829 currently looks like. I am thinking I can plug that yellow network cable into another wireless router and create our own wireless network (obviously off of their internet connection) for our 7 users.
Thank you for your help.

u may but any plane wireless device and run it in bridge mode (shouldd run by default i beleive). Then connect one of its lan port to any one of the lan ports available on the DPC3829 thing.
you are correct in what you want to do, and it can be done no problem.
Regards
Please mark answer as correct if it helps.

InfoSet - returns no result after transport

I realize I will not receive an answer to solve me problem, but hope someone can point me to how to determine my problem.
I have an InfoSet in our BI dev system that works fine. Previously, it was transported to our BI qas system and also worked fine. There was a data purge and reload, and since then it stopped retrieving data. There may have been a patch placed on the system, and changes to the InfoSet in dev which required adjusting the InfoSet.
What I have is the BI InfoSet working in dev, but not in qas. I have also created a duplicate of this InfoSet, and it returns no results. I have confirmed both my InfoProviders have reportable data, and the InoProviders have matching 0materials (which is the linked between them).
I'm open to any thoughts on what to check. I've ran RSISET in dev, recollected the InfoSet and transported it. The InfoSet still fails. It's puzzling why it works in dev but not qas.
Again, I'm open to any thoughts, however remote they might be.

If your QA is open, then try to deactivate and re-activate the InfoSet.

SharePoint Foundation 2010 Search returns no results

Hi,
SharePoint foundation 2010 Search is not showing any results after configuring the step from the below link.
http://wiki.sirkit.ca/2011/04/sharepoint-foundation-2010-search-returns-no-results/
My Server Setup :
SharePoint Foundation 2010
SQL Server 2008 r2
We have created two web application and configured the search service as above mention link.
And we have migrated a site from MOSS 2007 to SharePoint 2010 to one of web application,we assigned search database to the newly migrated content database.
Previously there was Form based Authentication was done on Moss 2007 site and on SP 2010 we are working on Windows authentication.
Database showing crawl is working and showing success results as well in SQL table, Its only Not able to show the results on the page.
Thanks in Advance
Dinesh
Regards, Dinesh Reddy.

Don't look at the databases, it's a bad habit to get into and will lead to confusion.
In search administration are you getting any sucsess messages in the crawl history and is the number of items in your index non-zero?
If so that implies that the crawl process is working and it's the user security that's the issue.
To confirm try searching for a file whilst logged in as the crawl account, that should return results.

SPA8800 and SRST for small branch office?

Hi All,
Need some help. I have a central site that will be running Cisco BE 5000. I have a small branch office I would like to place IP phones in so we can just dial an extension to call each other. The branch will have its own connection to the PSTN with a couple of POTS lines from the phone company.
So I am wondering how I can connect branch and HQ for intra-office calling and let the branch office use their PSTN connection for their local calls. I would think I could place a gateway such as the SPA8800 in the branch and connect the PSTN lines to it.
My concern is, what happens if I lose the WAN connection between HQ and branch? Then the branch could not make any calls right? I know a little about SRST and how that solves the issue of losing WAN connection with the central Call Manager site, but I what I don't understand is SRST something that can run on a device like the SPA8800 or do I need an ISR router in the branch that can run SRST if I want the branch to be able to make phone calls without a connection to HQ?
Thanks for any help!

u may but any plane wireless device and run it in bridge mode (shouldd run by default i beleive). Then connect one of its lan port to any one of the lan ports available on the DPC3829 thing.
you are correct in what you want to do, and it can be done no problem.
Regards
Please mark answer as correct if it helps.

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

Report obsolete returns diff results when backups are UNAVAIL vs AVAIL

Hello from Nova Scotia, Canada:
I'm wondering if someone out there who lives and breaths rman (10gR2) for a living can shed some light...
We are finding that report obsolete (as well as delete obsolete) are returning different results depending on if our backups
are AVAILABLE or UNAVAILABLE.
In our shop, our backups are changed to UNAVAILABLE because they get moved to a different location later, but delete
obsolete doesn't seem to work as expected unless the backups are AVAILABLE.
I am pasting some output below to demonstrate my point. Basically, in the output you are about to see, I'm showing you
my retention policy and I'm listing the backups that I have (and you can see their status is "A" for available). Then I do a
'report obsolete' command to show you what is considered obsolete (3 files are - which is what I expected). Then I change
all my backups to unavailable. Then I list all my backups again and show you that their status has changed to "U" for unavailable.
Then I do 'report obsolete' again and as you can see, I get different results! Can someone explain this to me?? I have RTFManuals
and no where does it say that availability is a factor that can impact determining what is obsolete. You also see in the output
below what version we're using (10.2.0.4.0) and that we are using a recovery catalog.
If someone would like to see additional information, feel free to ask, I'm more than happy to help you help me.
I should also mention this is a 2 node rac on linux.
Many Thanks.
========================================================
$ rman target / catalog rrc/rg@RRC
Recovery Manager: Release 10.2.0.4.0 - Production on Tue May 11 22:06:21 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: IPCSD (DBID=1703825384)
connected to recovery catalog database
RMAN> show retention policy;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
RMAN> list backup summary;
List of Backups
===============
Key     TY LV S Device Type Completion Time     #Pieces #Copies Compressed Tag
64093   B F A DISK        05/10/2010 03:06:52 2       1       NO         HOTBKUP201005100300_DB
64122   B A A DISK        05/10/2010 03:08:41 1       1       NO         HOTBKUP201005100300_ARCHLOGS
64361   B F A DISK        05/10/2010 21:56:33 2       1       NO         HOTBKUP201005102149_DB
64362   B F A DISK        05/10/2010 21:56:37 1       1       NO         HOTBKUP201005102149_DB
64390   B A A DISK        05/10/2010 21:58:02 1       1       NO         HOTBKUP201005102149_ARCHLOGS
64508   B F A DISK        05/11/2010 03:07:01 2       1       NO         HOTBKUP201005110300_DB
64509   B F A DISK        05/11/2010 03:07:10 1       1       NO         HOTBKUP201005110300_DB
64544   B A A DISK        05/11/2010 03:07:47 1       1       NO         HOTBKUP201005110300_ARCHLOGS
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 1 days
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           64093 05/10/2010 03:06:51
Backup Piece       64097 05/10/2010 03:06:51 /oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1349_PC_2_CP_1_DB
Backup Set           64093 05/10/2010 03:04:01
Backup Piece       64096 05/10/2010 03:04:01 /oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1349_PC_1_CP_1_DB
Backup Set           64122 05/10/2010 03:08:41
Backup Piece       64125 05/10/2010 03:08:41 /oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1351_PC_1_CP_1_ARCHLOGS
RMAN> change backup unavailable;
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1349_PC_1_CP_1_DB recid=1533 stamp=718599624
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1349_PC_2_CP_1_DB recid=1534 stamp=718599846
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005100300/RMAN_HOTBKUP_IPCSD_201005100300_BS_1351_PC_1_CP_1_ARCHLOGS recid=1536 stamp=718600043
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1354_PC_1_CP_1_DB recid=1539 stamp=718667376
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1354_PC_2_CP_1_DB recid=1540 stamp=718667600
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1355_PC_1_CP_1_DB recid=1541 stamp=718667797
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1356_PC_1_CP_1_ARCHLOGS recid=1542 stamp=718667821
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005110300/RMAN_HOTBKUP_IPCSD_201005110300_BS_1357_PC_1_CP_1_DB recid=1543 stamp=718686020
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005110300/RMAN_HOTBKUP_IPCSD_201005110300_BS_1357_PC_2_CP_1_DB recid=1544 stamp=718686253
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005110300/RMAN_HOTBKUP_IPCSD_201005110300_BS_1358_PC_1_CP_1_DB recid=1545 stamp=718686430
changed backup piece unavailable
backup piece handle=/oracle_admin/rman_backups/201005110300/RMAN_HOTBKUP_IPCSD_201005110300_BS_1359_PC_1_CP_1_ARCHLOGS recid=1546 stamp=718686452
Changed 11 objects to UNAVAILABLE status
RMAN> list backup summary;
List of Backups
===============
Key     TY LV S Device Type Completion Time     #Pieces #Copies Compressed Tag
64093   B F U DISK        05/10/2010 03:06:52 2       1       NO         HOTBKUP201005100300_DB
64122   B A U DISK        05/10/2010 03:08:41 1       1       NO         HOTBKUP201005100300_ARCHLOGS
64361   B F U DISK        05/10/2010 21:56:33 2       1       NO         HOTBKUP201005102149_DB
64362   B F U DISK        05/10/2010 21:56:37 1       1       NO         HOTBKUP201005102149_DB
64390   B A U DISK        05/10/2010 21:58:02 1       1       NO         HOTBKUP201005102149_ARCHLOGS
64508   B F U DISK        05/11/2010 03:07:01 2       1       NO         HOTBKUP201005110300_DB
64509   B F U DISK        05/11/2010 03:07:10 1       1       NO         HOTBKUP201005110300_DB
64544   B A U DISK        05/11/2010 03:07:47 1       1       NO         HOTBKUP201005110300_ARCHLOGS
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 1 days
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           64362 05/10/2010 21:56:37
Backup Piece       64366 05/10/2010 21:56:37 /oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1355_PC_1_CP_1_DB
RMAN>I just want to point out that the one obsolete file just contains a Control File and a SPFILE, as shown below:
BS Key Type LV Size       Device Type Elapsed Time Completion Time
64362   Full    17.64M     DISK        00:00:02     05/10/2010 21:56:37
        BP Key: 64366   Status: UNAVAILABLE Compressed: NO Tag: HOTBKUP201005102149_DB
        Piece Name: /oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1355_PC_1_CP_1_DB
Control File Included: Ckp SCN: 15213106404   Ckp time: 05/10/2010 21:56:35
SPFILE Included: Modification time: 05/09/2010 18:00:42---------------
**** END *****
Edited by: user478914 on May 12, 2010 3:03 AM
Edited by: user478914 on May 12, 2010 3:24 AM

Thanks for reading my post. Here is the result of doing the crosscheck command.
Problem still exists. Someone correct me if I'm wrong but I believe crosscheck does
nothing because all my backups are listed as unavailable, so there is nothing for it to do.
Any other thoughts or suggestions?
This problem is driving me bonkers. I have read the Backup and Recovery Basic Guide and Advanced Guide,
googled the web, searched OTN, searched Metalink and I can't find anything on the topic of backup
piece availability affecting obsolescence. Many thanks.
RMAN> list backup summary;
List of Backups
===============
Key     TY LV S Device Type Completion Time     #Pieces #Copies Compressed Tag
64361   B F U DISK        05/10/2010 21:56:33 2       1       NO         HOTBKUP201005102149_DB
64362   B F U DISK        05/10/2010 21:56:37 1       1       NO         HOTBKUP201005102149_DB
64390   B A U DISK        05/10/2010 21:58:02 1       1       NO         HOTBKUP201005102149_ARCHLOGS
64508   B F U DISK        05/11/2010 03:07:01 2       1       NO         HOTBKUP201005110300_DB
64509   B F U DISK        05/11/2010 03:07:10 1       1       NO         HOTBKUP201005110300_DB
64544   B A U DISK        05/11/2010 03:07:47 1       1       NO         HOTBKUP201005110300_ARCHLOGS
64761   B F U DISK        05/12/2010 03:06:23 2       1       NO         HOTBKUP201005120300_DB
64762   B F U DISK        05/12/2010 03:06:30 1       1       NO         HOTBKUP201005120300_DB
64792   B A U DISK        05/12/2010 03:08:13 1       1       NO         HOTBKUP201005120300_ARCHLOGS
RMAN> crosscheck backup;
using channel ORA_DISK_1
RMAN> report obsolete recovery window of 1 days;
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           64362 05/10/2010 21:56:37
Backup Piece       64366 05/10/2010 21:56:37 /oracle_admin/rman_backups/201005102149/RMAN_HOTBKUP_IPCSD_201005102149_BS_1355_PC_1_CP_1_DB
Backup Set           64509 05/11/2010 03:07:10
Backup Piece       64520 05/11/2010 03:07:10 /oracle_admin/rman_backups/201005110300/RMAN_HOTBKUP_IPCSD_201005110300_BS_1358_PC_1_CP_1_DB
RMAN>

"select count(*)" and "select single *" returns different result

Good day!
product version SAP ECC 6.0
oracle10
data transfers from external oracle db into customer tables using direct oracle db link
sometimes I get case with different results from 2 statements
*mytable has 10 rows
*1st statement
data: cnt type I value 0.
select count( * ) into cnt from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*cnt returns 10 - correct
*2nd statement
select single * from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*sy-dbcnt returns 0
*sy-subrc returns 4 - incorrect, 10 rows are "invisible"
but
1. se16 shows correct row number
2. I update just one row from "invisible" rows using se16 and 2nd statement returns correct result after that
can not understand why
thank you in advance.

Thank you, Vishal
but,
general problem is that
1. both statements have the same WHERE conditions
2. 1st return resultset with data (sy-dbcnt=10), 2nd return empty dataset, but must return 1 in sy-dbcnt
Yes, different meaning, you are right, but must 2nd must return 1, because of "select single *" construction, not 0.
Dataset to process is the same, WHERE conditions are equal...
I think the problem is that how ABAP interperets select count(*) and "select single *".
Maybe "select count (*)" scans only PK from index page(s)? and "select single *" scans data pages? and something is wrong with that?
I'm new in SAP and didn't find any SAP tool to trace dump of data and indexes pages with Native SQL.
se16 shows all records.
And why after simple manual update of just one record using se16 "select single *" returns 1?
I've just marked one row to update, didn't change any data, then pressed "save".

Database is only returns one result

I'm trying to count the number of calls & low priorty call from my account table in my databate. There is only one call so far in it. Call = 1 but its priorty is Low so Low should also be 1. I have check my sql in the Database and it return 1 result but in my program Low still = 0.
Connection conn;
String theNoCallsSQL = "Select call_no From Call ";
String thePLowSQL = "Select call_no From Call where priorty = 'Low' ";
int NoCalls = 0;
int Low = 0;
ResultSet rsetNoCall;
ResultSet rsetLow;
rsetNoCall = stmt.executeQuery(theNoCallsSQL);
while(rsetNoCall.next() == true)
NoCalls ++;
rsetLow = stmt.executeQuery(thePLowSQL);
while(rsetLow.next() == true)
Low ++;
conn.close();
ArrayList myStatsList = new ArrayList();
CallsStats myStats = new CallsStats();
myStats.setNoCall(NoCalls);
myStats.setNoLow(Low);
return myStatsList;

Haven't you heard about debugging? The simplest forum of debugging to answer your question would be to insert a line like this:System.out.println("Low++ executed");immediately before the line that saysLow++;Or you could use System.out to display the value of Low immediately beforemyStats.setNoLow(Low);The possibilities are endless.

How to convert Smart Form into PDF format and return the result in BAPI?

I want to convert a Smart Form into PDF format and return the result in BAPI.
can anyone tell me how it can be done with related example
regards
pranay

hi,
smart form to pdf--
All you have to do is call your SF to get OTF and then concert it to PDF. Works like charm:
DATA: p_output_options TYPE ssfcompop,
p_control_parameters TYPE ssfctrlop.
p_control_parameters-no_dialog = 'X'.
p_control_parameters-getotf = 'X'.
CALL FUNCTION v_func_name "call your smartform
EXPORTING
output_options = p_output_options
control_parameters = p_control_parameters
IMPORTING
job_output_info = s_job_output_info.
call function 'CONVERT_OTF_2_PDF'
tables
otf = s_job_output_info-otfdata
lines = t_pdf
and if u need more u can check below links also
Check the below links..
Re: Smartforms to PDF
Re: smartform (otf) as pdf and sending as email-attachment
VISIT THIS LINK
Re: Smartforms to PDF
PLZ REWARD POINTS IF IT HELPS YOU
rgds
anver

Spotlight returns wrong results

After installing Yosemite on my MacBook Pro, I tried to use Spotlight on some simple searches, with startling results. For example, I looked for Spotlight help...and a Word for Mac file opened. I recognize that Spotlight scours my Mac for material, but I do not understand why it would open a file that has nothing to do with the search terms.
Can anyone hazard a guess about what may be happening?

Did it and it worked to add _spotlight to the ACLs but Spotlight still return blank results on AFP clients...
Do you know what should be the permissions on the .spotlight-V100 folder?
Spotlight works on the servers so the index is fine. It's the AFP clients that can't read it properly or don't get all the data from it.

Bing based federated result sources not returning any results for non-English languages

I have a result source with this query:
http://www.bing.com/search?q={?searchterms} language:fr site:msdn.microsoft.com&format=rss&count=50&first={startIndex}
This used to give me 40-50 results for common terms like download, blog etc.
From today (7/14) IST, this source does not return any results. There are no results if I execute this query directly in IE either.
Same behavior observed for: language:es, language:de etc.
I do however get results as expected for language:en.
Any idea what the issue might be?

Hi Swapnil,
According to your description, my understanding is that no results returned when searching with non-English in the Result Source query.
I tested the same scenario per your post and I got the same results as you got.
I recommend to change the language:fr in the Result Source query to be lang=fr to see if the issue still occurs.
More references:
http://kbdump.com/sharepoint-2013-opensearch-search-twitter-facebook-wikipedia-page/
http://richardstk.com/2013/11/08/sharepoint-2013-federated-search-to-bing/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Small Branch Aware Quiz Returning NaN Results

Similar Messages

Maybe you are looking for