Small bubble under touch panel

today i noticed a small bubble under the touch panel on my X6. I never apply a lot of pressure when i use the phone.
It's like a bubble of air under a screen protector, but i don't use one.
Greece Nokia X6 RM-559 v40.0.002

The X6 has a capacitive screen so applying pressure shouldn't be an issue. Your best option would be to have a care point inspect your device to identify the exact cause.
Ray.

Similar Messages

Touch Panel Shared variable binding does not work.

Hi,
Is there any reason why shared variable binding is not working under Touch Panel Target?
Is there any plan for implementing or there is some trick I should know?
Andras

RebeccaFo wrote:
Hello Andras,
which version of LabVIEW are you using? As yu can see in:
http://digital.ni.com/public.nsf/websearch/04AAA6903A9456F08625715A0026BC57?OpenDocument
it should work. So what for problems do you have?
Thanks,
Just FYI, the KnowledgeBase article linked above has been revised and moved to a new location. See the new KnowledgeBase 58JFBGD2: Are Shared Variables Available For LabVIEW Mobile Module (Formerly PDA Modul...

Touch panels not under targets and devices

Hi All,
I've used the NI touch panel module before with Labview 8.6. I now have Labview 2009 and have installed the touch panel module 2009. When I open a project and go to add targets and devices I have no option to expand touch panels as I did in 8.6. The module appears in Max and in my license manager.
Any suggestions to what I can try? I have tried reinstalling the module.
Thanks,
J
Attachments:
targets and devices.JPG ‏19 KB

JChec,
That is strange! If you go to Help»Find Examples... from within LabVIEW you can open up the Example Finder. In the Browse tab of the example finder there are many folders that populate the center column. Two of those folders are "Toolkits and Modules" and "Toolkits and Modules Not Installed." Which folder does the Touch Panel Module show up in? Are you able to open up and run one of the examples? What Operating System are you using?
Message Edited by Ben S on 02-16-2010 11:56 AM
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Water/Air Bubble Under Screen?? :(

I managed to get 2 Touchpads in the firesale in the UK. One for me that I started using straight away with no issues - I'm very happy with it.
However, I also got one for my wife that I hid away until her birthday this week. It seems to function exactly as it should, but there is a small bubble of water or air under the screen, near the middle. You can still see the colours under it and it doesn't appear to be creating problems apart from being annoying because it is alwys there If you tap the screen anywhere else, it seems to glow briefly.
I am assuming this is a manufacturing defect? I wondered if you'd recommend just putting up with it, or will HP be able to fix this? Or is there something I can try to fix it?
Post relates to: HP TouchPad (WiFi)

Easier said than done on such a shiney screen Sorry they're a bit blurry - taken on my iPhone!!
Bit of paper to reflect on, you can see the black blob that is the "bubble".
Then here with the screen on (between Music and Photo/Video):
Then here a bit bigger as I touch the screen:
It isn't too noticable on photo's etc.. but shows up more on the black.

How to modify a combo box for touch panel operation?

Hi,
I'm developping a touch panel controled application.
The first step of the application is user log-in. My application has a small database of names that the user can access via the drop down menu of a combo box.
My problem is that the arrows and the slider of the vertical scroll bar are way too small to be fingers-operated:
Is there a way to modify the size of this scrollbar so that it's not too small for the operators' fingers?
Best regards,
peper

Hello peper,
As far as I know this is not directly possible (a least not with the control editor).
If you want to, you could also create your own "adapted" control yourself through an XControl.
This one can then (for example) combine a name input, a button and a listbox (with a big vertical scrollbar).
Or is this too far fetched?
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Touch panel fonts and Graphics

Gentlemen
In addition to my previous issue, I would like to ask regarding touchpanel TPC-2006 fonts and graphics. See, for our client we plan to give four screens in touch panel and in one screen it is with list of alarms. So here when list box control is drag n drop into front panel its showing horizontal and vertical scroll bar perfect,but when deployed to touch panel its surprise horizontal screen bar not seen this is one issue and also all fonts are not clear and things that seen in front panel when deploy its not shown in TPC why? is there any way if so please help me
I Have attach snap shot of it see in that in my front panel screen i hv got horizontal scroll bar, column header but in touch screen couldn't get all this. hope it will help to get better idea .
thanks
Attachments:
Front panel.JPG ‏59 KB
touch panel screen.JPG ‏21 KB

The graphics and font rendering in the touch panel module is a known issue.
As you have found out, the rendering of text and graphics on the TPC platform is not the same as running under Windows. The only way I have found to work around this issue is to continue to play around with the layout on the panel until you get acceptable results on the TPC.
I had an application a couple of years ago that was deployed to the TPC-2006 platform. When all was said and done, in order to get an acceptable looking panel on the TPC-2006 the windows panel looked severely misaligned in some areas.

IPhone 2G Bubbles under the screen

I have a 2G iPhone I purchused in January and I have three small spherical bubbles under the screen. I had a screen protector on and recently took it off and I noticed the bubbles. I have heard of people getting replacements but my real question is can I still get a 2G iPhone replacement from an apple store even though they only sell 3G iPhones now?

was this done in store? I am going to the Charlotte Apple store tonight or tomorrow night for this very purpose. thanks.

Function palette icons different for Touch Panel project

When I first installed LabVIEW (v8.5.1) the FieldPoint I/O palette did not show up when I tried to create a Touch Panel project. It did however show up if I simply opened the VI itself (which I created when I created the project) instead of opening the project. I decided to write the entire VI in that manner and would simply import it into a new project when I was finished. I recently finished writing the VI and imported into a new project I created. However, when I try to run the program it doesn't work. I also just noticed that the Merge Errors icon doesn't show when working in a project, but does show if I only have my main program VI open. Does anyone know why this would be the case? I think I have everything installed correctly, although with so many add-ons/toolkits/drivers I am not 100% positive. I'm trying to figure out why my program doesn't build correctly and thought I would start here. I don't know if that is the cause of my build problem, but any insight or help would be greatly appreciated.
Cheers,
-John

Hi John,
Touch Panel VIs do not support all of the functions or controls normally found on the LabVIEW palettes. In the LabVIEW Help, if you browse to Touch Panel Module >> Creating Touch Panel VIs, there are topics called "Designing PDA and Touch Panel User Interfaces" and "Developing PDA and Touch Panel Block Diagrams." Differences in Touch Panel controls, indicators, functions, properties, and methods are documented here.
When a VI is opened as part of a project under a touch panel target, the Functions and Controls palettes change to display only functions and objects that are supported. You will notice that some VIs, such as Merge Errors.vi, are missing, while others, such as PDA Error Handler.vi, are added. If the VI is opened outside of the project, it isn't specified as a Touch Panel VI so the standard palettes are visible. I prefer to develop my VIs under a touch panel target to make sure I am using supported functions.
Hope this helps clarify things.
Jennifer R.
National Instruments
Applications Engineer

Ejecutar aplicacion labview en un touch panel con linux

Estimados
Necesito saber si es que es posible correr una aplicacion creada con el modulo touch panel del labview 2010 en un dispositivo touch panel con linux.
Atte.
CS

Hola/HI
Debido a las diferencias en los sistemas operativos esto no es posible, con el fin de ejecutar una aplicación independiente bajo el ambiente Linux debe generar el el código fuente bajo el ambiente Linux a través de LabVIEW para Linux
Due to the differences in the Operating Systems this isn't possible, in order to run a Stand-Alone application under the Linux environment you must build the source code under the Linux environment using LabVIEW for Linux.
Saludos/Best Regards
Diogo Aparecido
Engenheiro de Aplicação
National Instruments Brasil

Touch Panel for Xperia Z1

Hi,
Can you please tell me how much will the touch Panel cost for my Xperia Z1? I've been informed that the part is not covered under warantee. Can you please explain it to me as why th etouch panel is not covered under warantee?

You have to contact your local xperia team,we do not know how they will judge your device:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

TPC 2215, new touch panel does not run normal labview programs?

We recently bought a PC (PPC-2115, normal win-XP) from NI for an industrial application. Now we heard that that unit is discontinued soon, so repair service will be very limited. We want to change to another iPC. NI suggests TPC-2215 touch panel with windows-7 embedded. But then they say that we need a special Touch Panel license to make exe-files for this PC.
If this is true it makes the TPC 2215 a very bad choice for us. Both that we have to pay a new licence, but most that new introduce a new taget. The exe-file we make for the TPC-2215 cannot be run on any normal PC (during tests, as backup if the TPC needs service etc.). Since we already have a bunch of normal iPC (different brands, including NI) we have to compile every program twice, one for touch panel, and one for normal labview runtime.
So is it really true that a normal labview program "hello-world.exe" will not run on the new TPC-2215?
(sampe question would apply to TPC-2206 and TPC-2212)

I can now confirm that I can use our normal license to make normal windows executable files. So I am happy!
Only the disk is a little too small, but I heard that should be changed soon.

Using a Meter control in LV Touch Panel, and using shared variables that are custom controls.

I Just started using LV touch Panel module with an NI TPC-2106.
I have two differenct problems:
1) I was planning on using the "Meter" control quite a bit. I can set up the meter exactly how I like on the host PC, but on the touch Panel computer it seems to ignore my adjustments, mainly the start and end of the scale - i.e. I would like control to run from 0 to 360 with 0 straight up, using the entire circle. However, on the Touch panel computer it always puts 0 at about 7 o'clock and 360 at about 5 o'clock. I have also tried adding markers to no avail.
2) I am communicating with a compact fieldpoint controller. I can creat a shared variable that is a simple double with no problems. However, I have some shared variables that use a custom control for the variable type - bascially a cluster with a couble doubles, a time stamp, and an enumeration. It lets me drag the shared variable into my diagram, but it seems to ignore it when I run it.

Ipshita_C,
- I am using LV 8.6.1f1and LV Touch Panel 8.6.1.
- I have attached a simplified VI that shows how I want to use the meter. Notice that the placement of the endpoitns does not work correctly on the touch panel, and that it ignores the arbitrary markers that I placed.
- I also have included an XY graph control that displays on the TPC with margins around the graph area that I removed from the graph control.
- For the shared variable, it appears to be an issue related to the touch panel, not fieldpoint. I found another thread in this forum that mentioned that clusters containing Enumerations do not work in shared variables on the touch panel. I changed the enumeration to an integer and it now works fine.
In general, there seem to be a disappointing number of limitations in the touch panel implementation. My biggest concern is that I have not found any documentation from NI that lists these limitations. I seem to have to try things out and see what works and what does not work. Can you point me to a comprehensive list of touch panel modules limitations?
Attachments:
test 2.vi ‏10 KB

Parallel use remote control and touch panel.

Hi.
Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
Thank's.

Hi
No. When a codec is paired with a Touch controller it is not possible to use the remote control.
You question number 677 in link bellow
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
br Oleksandr

LabVIEW Touch Panel -- I can not get activesync to connect between the TPC-2012 and my XP workstation. There is no USB client connection on TPC-2012

How do I get the TPC-2012 to connect to my workstation? I have read all the hardware manuals, getting started manuals: nothing works. The remote access using http://x.x.x.x/RemoteAdmin does not work. I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" . Active sync seems to want a USB connection only. I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.
Help!
Louis Prugh
General Dynamics

Hi David,
thank you once again for your help.
So when viewing your Local Area Connection>>Status
you're seeing data packets sent but no packets received on your desktop
machine? - Yes
Is your desktop configured with a static IP address or is it
configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
Also, does your TPC
get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
Can you provide the address, subnet, and gateway you're getting for
both machines?- I've done it, but it didn'e help
Also any firewall settings or exceptions you may have
active if the firewall is enabled? - firewall is disabled
I'd also like to know what
modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
Thanks,
Martin

Multimedia touch panel buttons on Satellite A500 are not all working

Hello,
I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corresponding function is not executed.
For example, the Eco button at the top doesn't switch on/off the eco and the mute button does not mute the volume.
Device manager shows all devices as working correctly.
There are no errors in the Event Viewer Application or System logs.
Please advise!
Thank you,

Hello
Try please to reinstall Toshiba value added package.
Remove preinstalled version, restart your notebook and install latest version from Toshiba download page.

Small bubble under touch panel

Similar Messages

Maybe you are looking for