Small bug in WAP4410N firmware 2.0.3.3

Attached is a screenshot of a small bug in the System Up Time. It shows Hour:Day:Sec where it should show Hour:Min:Sec.

It seems to happen when using external monitor and "Mirroring" is enabled.
We'll do some more tests to fully confirm
If someone else has also noticed this, please post details.
Thanks!
HD Cam Team
Group of photographers and filmmakers using Canon cameras for serious purposes.
www.hdcamteam.com | www.twitter.com/HDCamTeam | www.facebook.com/HDCamTeam

Similar Messages

Satellite P500-1D6 - Small bug between cover plate and screen.

Hi
I have a small bug (in Dutch: "donderbeestje") between the protective glass and the actual screen.
Where I bought the laptop they yell me that they can't do anything about it and this is not under warranty of Toshiba.
For me however, this should be under warranty of Toshiba.
The screen with it's upper layers should be firmly closed so that no foreign objects can come in between.
So, my question is if this is under warranty or if not, what can I do to get this thing out of there?
Kind regards,
Pascal.

Hey,
Regarding such hardware related problems you should contact an official authorized service provider. The guys can repair notebooks under warrant for free if its a warranty case. Furthermore they can give you an exact if its normal or hardware problem.
Here its only an user to user forum so nobody can give you an exact answer but a full list of all ASPs you can find here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

It looked like a small bug going up and down on my screen then it stopped about 12 o clock a quarter of the way from the top, now it seems to be burned in to the inside of the screen, anyone seen this before? And what can be done about it, macbook pro

I have what looked like a small bug that ran up and down the screen and then sudenly stopped in center upper half of screen and now appears to be burned in to the inside of the screen, anyone had this probelm before and what can be done about it?

Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.

Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

Hi I am facing some bug in new Firmware V50.0.005
1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart your phone to close that radio application. (no other go)
If any Solution is there for this please let me know.
Thanks in advance
Ssandesh T S

For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
For the music library:
1. Connect your 5800 to you PC in Mass Storage Mode
2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
3. Open your SD memory card/Removable Disk in My Computer on PC
4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Bug in new firmware 7.0 for 6300 cannot create per...

There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
I am not able to create access point which is necessary to access internet with java applications.
When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
Then i go back and there is no new access point. In previous version of firmware it created access point.
Do anyone know about this issue ?
How can I tell to Nokia support that there is this bug ?
thanx for replies

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Small Bug in Flash 8: loading swf that´s a vectorized image in many layers

Hi! There´s a small bug in flash 8. If you load a swf
that it´s a vectorized image in many layers, when you give it
an action in onLoadInit, like mc.onRelease, the mc don´t
"catch" that action. You can try loading an image (it works), a lot
of swf (it works), but with this kind of swf the actions onRelease,
onPress, etc... don´t work.
The
swf
I´ll make a different vectorized image to make it works
(if there is only one layer it works)

Seems odd it will only run once. Usually if a cache problem
you get the same
results even when you update the movie or server scripts.
If it is
http:// it is not local even if from the browser
cache.
Verify the html is validated.
Check to see if this applies to all swfs. Create a simple
hello world swf
that connects to a JSP script that returns a simple value to
Flash. If that
seems to work, then the problem is in the JSP or
Actionscripting coding.
Check you can load the JSP script repeatedly using a direct
call to it on
the browser line using
http://.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"srikanth_s_india" <[email protected]> wrote
in message
news:e6obld$lfb$[email protected]..
> Thanks for the article link.
>
> I can't provide the URL as it is within our application
which requires
> logging
> in. However, one more interesting thing about it is that
it always works
> for
> the first time (in the browser/machine) but not from the
next time.
>
> My doubt is whether it is because of the caching? When
it loads for the
> first
> time, the HTML and SWF files load from our server and
hence are allowed to
> communicate with our JSP. However, when it loads the
subsequent times, it
> probably loads from the cache and hence considered as a
local file and not
> allowed to communicate with our JSP file which is on the
Internet.
>
> Can anybody tell me how to enable a local SWF file to
load SWF files from
> the
> Internet & access URLs from the Internet in Flash 8
pluggin?
>

Small bug in iTunes 7.4.3. on Win XP Pro SP2

It's a small bug. When I try to edit few or more MP3's file information (ID Tag), but they are "read-only", the change dialog appear normally - all edit forms are enabled - but when I press "OK" the changes didn't save and no error box appear.
I think that somebody understand this - sorry for my English!

Yes I do, I'm using an administrator account.
I dont understand what is going on.
I had an Oracle 8i installed before. but I delete all the registry entries. And installed the jre 1.4.2.05.
But nothing . Always abort in 36%.

Some small bugs and errors

Hi,
In the meantime, waiting for the DPS network fix, I have some small bugs and errors to post:
#1: When signed ot from the folio builder panel, the click to create new folio message isn't useful, as it doesn't work. You must be signed in.
#2: "System Status" cut off on the DPS Status Website:

Hi Bob,
Just tested again. but nope, it doesn't work for me anymore. Since one of the latest updates, I can only create folios, when I'm signed in. Here is my video proof:
This is the case for me on two (tested) computers running CS5.5 and CS6!
That's why I thought this feature has been removed.

Report bug in last firmware nokia 130 and 130 dual...

report bug in last firmware nokia 130 and 130 dual sim rm-1037 and rm-1035.
Bug is when you choose phone book and the phone freezes on the menu and after 1 minute menu works but the second attempt to open the phone book phone freezes again. problem is present in the last firmware. I hope that the problem will be eliminated in the next firmware.
I tried also with Nokia Software Recovery Tool but without success, the phone still freezes when opening the phonebook.

1. Country Bulgaria
2. Try with three sim cards three different operators in Bulgaria, Mtel, Globul and Vivacom.
3. 100% of the problem is not in the SIM card, the problem is a bug in the software of nokia 130 and 130 dual.

Small bug: Database configuration - Initialization parameters

Hi!
SQLDeveloper version: 3.2.20.09
View -> DBA -> Database configuration -> Initialization Parameters -> right click "Open" -> editor with "Parameter" and "Value" (inter alia) columns appears
Changing value for parameter "optimizer_features_enable" isn't working:
Example:
Parameter: optimizer_features_enable
Changing value from 11.2.0.1 to 9.2.0 -> commiting changes -> ORA-02017 error appears ("integer value required")
In "Messages - Log" window appears the following statement: ALTER SYSTEM SET optimizer_features_enable=9.2.0 COMMENT='' SCOPE=MEMORY
I think rather it should be: ALTER SYSTEM SET optimizer_features_enable='9.2.0' COMMENT='' SCOPE=MEMORY
It looks like a small bug.

Hi dz_r,
One workaround for this case is, when editing the data in the grid cell, to enclose the Oracle version in single quotes. After committing to apply the update (which works), the grid refresh strips away the single quotes, leaving the desired value displayed in the cell.
So this is, as you say, a small bug. Note that not all parameters of type String require single quotes, e. g., cursor_sharing=exact. Probably any String beginning with a numeric digit should be enclosed in quotes automatically.
I logged the following bug:
Bug 16733790 - UPDATING INITIALIZATION PARAMETER OF TYPE STRING FAILS IF BEGINS WITH A NUMERIC
Thanks for reporting this,
Gary
SQL Developer Team

WRT610N - Bugs and new firmware

I installed WRT610N under XP (original firmware, no updating), runs well: Internet OK. Storage on 500 Mb Western Digital HD OK, FTP OK, WiFi OK, Media Center OK with PS3 (Twonky work well), DDNS is OK.
Considering that: FTP a bit sluggish, FTP autentication not possible (should be sorted out by firmware B10 ?!) , People says that with "B10" it is no longer impossible to get to Twonky through port 9000.
I ask: anybody can suggest me if it is worthy to upgrade my Firmware with the latest "B15" dated 28th of Luglio ? Anybody knows anything ?
Moreover: other owners please keep in touch for info sharing, it seems the only way to get knowledge on it.
Hugs

The die is cast. I have got it. When I bought it the manufacturer has not told me that USB support is crap. In fact it works, but with some bugs.Considering LinkSys Cisco is a mayor Company, I respect them and I count they sort out understandable bugs by updated firmware.
The router is also not cheap, therefore they have an obbligation to the consumers even though the post-sales service is prompt but not qualified (sigh). I forgive them because they have sooner or later to atone for their sins.
I was referring to the forum because the most qualified people who knows where to put hands are the guys like me, and better then me, the one who spend hours to get to the service who has been promised .....(sigh again).
So, I do not accept (respectfully) Your approach.
Anyone who likes to co-operate telling me what about latest July the 28th firmware ?
Hugs

Small bug in DHCP setting

If I write a message in DHCP settings using quote (for example: Welcome to "NewNetwork") the base assigns to the clients a local IP (169.x.x.x) and no connections to internet.
If I write the same message without quotes (Welcome to NewNetwork) IP assigned to the client are correct (10.0.1.x or other ranges) and all works fine.
A small bug but all a night to find it!

Right, the original method does not make much sense. It shows the point wrt.Generics, though.

Small bug in 4.0.4

Hi, I own Neo V with android 4.0.4 installed, I found a small bug:
In the smart dial if you press the volume up or down, instead of ringer volume it sets media volume. It's no big deal but it is a bug

Thanks for posting this. I will feed this back to the developers.
What do you think about this forum? Let us know by doing this short survey.

A small bug on lock screen

Hi,
there was a bug on lock screen before the update and it is still there. I thought Sony might have not been noticed it because it is really a small bug so I wanted to give information. If you use draw pattern when you touch left or right bottom corner for a while it reflects as you touch widget. Or if you slide top to down at right or left corner it enlarges the widget.
Edit: I have take some screen shots:

Sorry for spam but someone should take care of this

Polymorphic VI / Select Type (small bug ?)

My english is not good enough to explain all this, so i prefer to use a picture
I think this behavior is not correct (small bug ?)
this problem is about the use of a polymorphic vi and the "Select Type" command.
(my polymorphic vi in attached file)
for a quick test -----> QUICK_TEST.vi
Attachments:
polymorphic (Wait ms + dataflow).zip ‏101 KB

CAR 354827 discussed in this thread has been fixed in LabVIEW 2013

Small bug in WAP4410N firmware 2.0.3.3

Similar Messages

Maybe you are looking for