Small change to schema

Hi,
I have registered XML Schema.
I have inserted 1million XML documents into the default XMLType table.
Now I want to make simple change in the schema.
i.e. new enumeration element.
I know that all documents will be validated correctly with the new schema.
My question is:
Do I really need to use copyEvolve to apply this small change ?
Or I can make a new version of the schema without calling copyevolve?
Because reloading the documents by copyevolve seems to be strange for this very simple modification of the schema.
regards,
Cezary

Today you will have to use copyEvolve.
This exact scenario or adding an additional value to an enumeration was one of the scenarios that was demonstrated in Oracle Database campgrounds at OOW in September of this year. Adding an additional enumeration value to an XML Schema with 10,0000 documents loaded via inPlace evolution took approx 3 seconds, compared to 8 mins with copyEvolve. In-place evolution is a feature that will be available in a future release of the Oracle Database.
-Mark

Similar Messages

A seeming small change by Verizon causes major monetary and unrecoverable damages

A seeming small change by Verizon causes major monetary and unrecoverable damages
Back, I think in March or so, Verizon changed how they bill. Prior to this time frame my elderly mom paid the phone bill and I paid the DSL bill. The DSL bill came on my name and I paid by credit card and the phone bill came under her name and she paid by direct debit. She will not use a computer.
So, they make both bills on her name and won't change it. They did, however, allow the payment from my credit card.
The first unfortunate consequence was the internet speed suddenly dropped in speed by a factor of 2 to 1.5/364 and it did take me probably a month to notice it. NO ONE that I called was able to find the problem. It took multiple attempts until some bright “call in technician” said the problem is on their end and could be fixed in software. Thus, I believe, because of the name change, the provision changed too. The phone line crapped out too at this time.
The troubleshooting was stupid too. I took another modem and connected it directly to the NID and directly to the laptop and the technician on the phone said, it's either in your house or your modem and wanted to send me a new modem which they did. I don' get it. This is the wrong conclusion.
This shows the need of modems like Westell 2200 and the Westell 6100 because of the ability to measure line statistics and provisioned data rates.
Verizon sent me a D-link model DSL-2750B modem which I have to return because its just plain old stupid. It boasts Wireless n and the wired ports are 10/100. What's up with that? Next, there are no line stats and a horrible interface, akin to Verizon's website. Still can't figure out how to put it in Bridge mode. I own a D-link repeater and the interface is fine.
I asked them what modem they would send me and they would not tell me, so I got whatever piece of junk they had lying around.
I have now purchased a Network RAID array with no wireless access and with ~400 mb/s access rates. Yep, really stupid router.
Because of the number of outages, I have to be able to quickly switch from a bridge connected modem, Westel 6100) to one that is connected in direct mode, a Westell 2200 It's almost easy, but not quite, since the equipment is up in the rafters in the laundry room. The DSL cable is commercial terminated CAT5, which is rare. The modem is within 6' of the NID.
Plans include, the ability to switch the DSL line with a switch with positions for Modem #1 (Bridge), Modem #2(Wired), #3(RJ11 – Normal wiring) and #4: RJ-11 (Reverse wiring) and moving the direct connect jack for easy access. In any event, testing with the DSL modem at the NID is the gold standard.
In progress, is a 48 port Gigabit patch panel for phone and Ethernet, A separate 24 port RED patch panel will be bridged for phone.
I have already upgraded my network infrastructure to include a UPS for the network infrastructure and POE (Power over Ethernet) for the DSL modem. The UPS backup does not backup a repeater although it may in the future.
Now, let's go back to this seeming innocuous billing change.
So, this constant having to access the modem in the alternate configuration and a medical condition (migraines) that makes it hard to think clearly. So, in one of these episodes, I placed my laptop on top a container that was soaking laundry.
So, the LCD screen has to be replaced at $300 and the battery had to be replaced. Then the Ethernet cord to the modem got pulled and caused the laptop to fall on the floor. It worked for a few weeks and then suffered an UNRECOVERABE hard drive crash.
During this time frame, in fact over a 2 day period. My mom ended up in the hospital and to a rehab facility. My car ended up staying in the shop for a few days because of parts unavailability. My hard drive crashed and their was water in the basement. I don't have time for this.
Recovery would have cost $2004.00, if it were possible. I only have a drive image from 2011 which I have yet to try to use. I' now running UBUNTU Live rather than Windows 7 Pro. Some of the very important stuff was backed up on Flash, but a lot of stuff is gone forever.
Plans are to contact the billing office and the attorney general's office in the state where billing questions need to be resolved.
The last outage, fixed on July 27, was flagged as a phone outage by Verizon, when 18 routers supposedly died. 18 routers suspiciously means that they they were not adequately protected against surges. Verizon should look at the way DelMarVa Power reports outages: see: Delmarva, Put the usual World Wide Web Prefix and the COMercial domain suffix
For god's sake, quit making the website circular. I though Yahoo was the expert in that. I never visit Verizon's website unless there are problems. I mistaking thought I could find outage information, say using my phone's browser. This time I had to purchase service from CLEAR internet to ride me through this fix.
I know, you can't fix stupid and you can always find a better idiot. Comcast is looking more attractive.
Compensation of or my loss I will probably never get, but maybe with the help of the attorney general I can get the billing fixed. I do have power of attorney. Now, of course, the name the Verizon Website addresses me as is not right on this forum.
All, basically because of Verizon's unreliable network, incompetent people and the lack of maintenance of copper lines. The problem is, “We have little choice”. Currently, we need traditional land-line service to support an Emergency Response system. It's unclear whether digital phone lines support Faxes and alarm monitoring reliably.
I'll bet that there is NO WAY to tell Verizon if a service address as special needs like Emergency Medical reporting via phone or Internet, so that priorities for repair can be done properly. Utilities have that capability. Those ares with people with oxygen generators or other medical equipment get a higher priority,

That should not be happening. I sympathize with both of you (you and the the person who strated this thread). That sounds like the reason I would never want Dish.
I am fortunate that my service with Verizon Fios has been very reliable and that I haven't had too many issues over the years. But don't get me started on Verizon Wireless. I am through with doing any more business with them once my cell phone minutes run out. I love it when they say they have done everything the could to investigate such a simple issue with running my debit card transaction wrong and blaming it on my bank, i.e. running it through as a "debit" when I choose "credit" all of a sudden now two times in a row after 4 years of doing it right as "credit". And now they consider the issue closed on their end when nothing has been resolved. That's no way to treat a long time customer and I really felt treated like I was a bother to them. It's not like I ever paid them much money for this pre-paid cell phone service that I have used infrequently but I was really mad at the way they just wrote this off and pretty much told me "too bad". Talk about "customer non-service". It's also very hard to track the number of minutes left on my balance. I'm due for an upgrade anyway. I want to switch to the I-Phone from this flip phone but never again with Verizon Wireless. T-Mobile is way more attractive. Verizon Wireless is not only an entity separatedfrom Fios but it's definitely a much different animal and their customer service has really gone downhill. When you're treated like they don't care, it's maddening.
My customer service experience with Fios overall has been far superior to that most of the time. My setup is simple and even though there are some people who will inevitably complain about anything just to vent, I definitely believe at least some of what is posted here. And switching TV, phone, and Internet providers is a lot more involved than switching a cell phone provider.

Dealing with small changes to MS Word source file when creating a form

I have an MS Word 2007 file that I converted to PDF in Acrobat Professional 9.0 and converted the PDF to a fillable form. I spent several hours yesterday working with the field types and adding submit buttons/radio buttons, etc. This morning, my supervisor made a few (slight) changes to the source document. Must I start all over again with adding the fields, changing the field types and the submit buttons, or is there an easy way to place the form field data over the new file? Copy and paste the fields into the new file?
The small changes related to some placement of text, and not changes that could be made with the touch-up text or typewriter tools.

The steps:
1. Create the new PDF of the WORD document.
2. Open a COPY of the old form.
3. Use DOCUMENT>Replace pages to replace the page of the old PDF with the new PDF document.
4. Save the form.
If you created the form in Designer, this may not work and you may have to look for a solution in Designer (LiveCycle forum). I suspect this may be an issue if you are new to Acrobat and likely ended up making the form in Designer. For a form created with the form tools under TOOLS in Acrobat, the above steps will do the job. Keep in mind that form fields are not a part of the PDF document, but are markup. That is why the replace pages works.

How to change the Schema (DB2, Oracle) in CommandTable at run time

Dear all,
I have a problem as below:
I have created report with CommandTable, then I am using Java and CRJ 12 to export data. So how to change the SCHEMA in CommandTable?
Please help me on this.
Ex: CommandTable is SELECT * from SCHEMA.TableA, SCHEMA.TableB
Thanks,
Nha

Dear Ted,
I want to change DataSource, it means the report will be load and change connection at run time (using CRJ SDK) and i want to change the SCHEMA.Tablename in CommandTable in report.
I also use the parameter to do it, but it can not be at run time, just correct when designing.
Could you please help me on this. You can post the code if any.
Thanks,
Nha

Small changes to a web gallery slows iPhoto down to a crawl

I am using iPhoto 7.1.1, the latest update at this time. I have a large number of web galleries published through iPhoto to .Mac. The latest is about 150 photos from Christmas. I originally published without changing the photo titles. I have been correcting that plus adding a few more photos. Any small change in a web gallery seems to be immediately published and that slows iPhoto down to a crawl. I have the fastest connection I can get from ATT's UVerse. Is there any way to turn off this immediate updating so I can make all of my changes then publish after that? I have been searching through the help files, Apple support, and the web and can't find anything. One poster on this site said his updates don't transfer until he hits the publish icon to the right of the gallery name. That's not how mine works. It automatically publishes at the slightest change. Others seem to say it is automatic for them as it is for me. It really is almost impossible to make lots of small changes to a large gallery (like adding descriptive titles) the way it is now.

This "feature" also makes my nuts. I hate software that does these "automatic" processes, without a way for the user to alter them, or turn them off. I have been trying to change file names in one album that contains a number of images drawn from other albums that have been published to my web gallery. I do not wish the names to be changed in every album, nor in the web galleries published. But it all seems to be automatic. The name change first is applied automatically to the other albums that contain that image, and then automatically changed in every web gallery.
I have posted these comments here: iPhoto menu -> Provide iPhoto Feedback.
I suggest everyone that is concerned with these issues do the same. If we are lucky, Apple will soon update the software. These changes seem so easy to achieve one would think, and they would add a lot of control to the use of the program.
Jim

IS-U changes of schemas - which table?

Hi all,
Does anybody knows in which table I can find informations about history of changes in schemas ?

OK I've found it out. These informations are stored in standard SAP tabels for history - CDHDR i CDPOS

Editing timelapses in Lightroom- looks very different if there´s a small change within the frame

Hi
We´re having some serious issues with editing timelapses in Lightroom (5.6). What seems to happen over and over again, is that if there´s a small change within the frame (such as a bird flying past, people walking), the editing result varies greatly compared to the previoius frame. It´s easiest to understand what I mean by viewing the examples below.
Here there´s one picture without a boat in the frame, and a few seconds later there´s a boat in a small part of the frame. The camera is set to full manual, and the two JPGs which show the unedited pictures shows that the background and sky in both pictures look exactly the same. However, after pasting the same editing setting on both pictures, the picture with the boat looks vastly different (shadow areas are much darker). It´s the same result weather it is a white boat, a black bird or a person walking in/out of the frame. The picture gets much darker, and leads to some serious flicker in the timelapse which can be impossible to get rid of.
I assume that as there´s a small change in the histogram when the boat enters the frame, this change affects what Lightroom thinks of as shadows/highlights on so on? The example below has some heavy editing applied (shadows up, highlights down, clarity). You can see the settings that have been adjusted in the screenshots below. Does LR change what it considers shadows/highlights based on the histogram, or are there standard settings? If this is the case, it would be much better for timelapsers if Lightroom had standard values for what is considered shadows/highlights, so that two pictures where the only difference is a person walking on the street or not, would look the same with the same editing settings applied. What I find strange if LR works like I´m asking here, why does the picture get darker whether it is a white boat or a black bird changing the histogram slightly. Shouldn´t they then have the opposite effect of each other?
Any ideas what is causing the difference, and what I can do about it? Thanks!

In these forums you are only talking to other users like yourself, not Apple. Be sure to repost your info in the channel Apple has set up for it:
http://www.apple.com/feedback/imovie_iOS.html

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Doing the following wouldn't hurt either:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.

Change the schema of a report using oracle odbc at runtime

Post Author: Guy
CA Forum: .NET
Hi,
I'm using Crystl 11 r2 and coding in C#.
In our oracle database we have many schemas. When designing the report I can see many schemas (~14) when creating the new connection, but not the one for which I provided a username and password! I guess it woud have been the ~30th of the list. This wouldn't really mather if I was able to change the schema on which the report will be executed at runtime.
But with both the native oracle driver or using odbc I am not able to change the schema (even if I change the DatabaseName in the connection info. I've had a look at the CR_VS_CHANGE_DATABASE.ppt but it doesn't help me with Oracle... Funny, I can't put anything in the connectionInfo.DatabaseName and it doesn't seem to change anything...
Anybody ever succeeded to change all the connection info at runtime when the report runs on oracle?
Thanks,
Guy

You should be able to do that by so:
Go into the object navigator. Click on Paper Layout, and click on the Main Section label (not the plus sign). Hit F4 for properties - height and width are there. I think if you just changed those to what A4 is designated as, it should work.
Note if you use a header/footer page, you would need to do the same to those pages as well.
Hope that helps as I have not actually needed to do this yet. Good luck!

Azure Website doesn't recognize my Database's Table after changing the Schema

I have a Microsoft Azure Website running and working with an Azure SQL Database for the sole purpose of storing and retrieving user accounts. However I needed a mobile client as well there fore according to numerous tutorials online such as [THIS][1],
I had to change the 'schema' of the database from 'dbo' to my mobile service's name which is 'usermobileservice'.
This was done using the SQL query:
CREATE SCHEMA usermobileservice; ALTER SCHEMA usermobileserviceTRANSFER dbo.usertable;
This did the trick and I was able to connect to the Database using my mobile applications BUT now I can't access the database using my Azure Website! Gives me this error:
Server Error in '/' Application.
Invalid object name 'UserTable'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'UserTable'.
I believe the ASP.NET Web Application cannot find the Database Table anymore since I changed the schema? What is the right way of sharing the data between a Website and a Mobile Service?

Hi,
Thank you for your post.
I am trying to involve someone familiar with this topic to further look at this issue.
In the meantime, please have a check on the below link and check if it helps.
https://social.msdn.microsoft.com/Forums/azure/en-US/60764eb6-17d0-4395-a887-2a793b44ce88/connect-mobile-service-to-an-existing-database?forum=azuremobile
Regards,
Mekh.

Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made. I don't want to introduce issues by mass-recompiling to the latest version.
What is best practice in this case? I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
Any ideas?
Solved!
Go to Solution.

The report is a great idea! I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason. Those files have sure come in handy!
Also- its a good idea to make an image of the target as accepted and archive it somewhere. ESPECIALLY for PXI based systems from NI. (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
Jeff

How to change the schema to another user ?

Hi,
I've registerd this schema and it works well,
but I need to change the schema to connect to another User like MYUSER_2.
because I have to migrate the MYUSER_1 to MYUSER_2 and then to delete MYUSER_1
when I register the schema again with this user MYUSER_2
, all xml-entries will become destroyed ?
what can I do ?
it's better , to register the schema without a user ?
Norbert
dbms_xmlschema.registerSchema(
schemaurl => vschemaurl,
schemadoc => xsd_file,
local => FALSE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => MYUSER_1
,CSID => nls_charset_id('AL32UTF8');
);

If 2 seperate users need to work witht the same XML Schema then the XML Schema should be registered as a global Schema. If you want to change the owner of an XMLschema, just like if you want to change the owner of a relational; table you will have to export the data and import it again.

How to change the Schema Location ??

Hi ,
I need to change the Schema name which is registered through the Deployment Manager . OWB allows all other Parameters to change except the Schema name . Any workaround ???

On your mapping right click and choose the option configure (window Configuration Properties), open the tab "Sources and Targets" on this tab choose the table that you want to change the schema and on the label Schema insert the schema to be used.
hope it helps!
Regards,
Vitor

How to change parsing schema for using application in test environment?

Hi,
I set up a test environment, i.e. an other Oracle schema with identical tables, views etc. to the productive environment. I wanted to duplicate the APEX application so that there will be a test version using the test Oracle schema and productive version using the productive oracle schema.
Can some one please give me some tip how to do this? As far as I see i could change the parsing schema in the APEX Application install SQL in the following ways:
1. While exportin the application with APEX
2. In the result install f...sql file using search-replace
3. While importing the APEX application via APEX Development GUI.
I would prefere 1. or 3. but in both cases when I would like to change the schema name, the drop dowl list does not contain the test Oracle schema name. Do I have to grant something to the APEX worksspace schema for the test schema name to show up in the drop dowl list?
Tamás

On that screen,
- click Create
- select "Existing" Schema, click Next
- select the Workspace, click Next
- select the Schema, click Next
- click Add Schema
And now you'll end up with two schema's attached for the same Workspace.

[svn] 3832: small change in sample file

Revision: 3832
Author: [email protected]
Date: 2008-10-22 15:33:51 -0700 (Wed, 22 Oct 2008)
Log Message:
small change in sample file
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/asdoc/en_US/mx/components/examples/FxListExample .mxml

Revision: 3832
Author: [email protected]
Date: 2008-10-22 15:33:51 -0700 (Wed, 22 Oct 2008)
Log Message:
small change in sample file
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/asdoc/en_US/mx/components/examples/FxListExample .mxml

Small change to schema

Similar Messages

Maybe you are looking for