Small Changes to Save Big Bucks

These five tried-and-true money saving tricks will help you stretch your dollar and get the best bang for your buck.

Might be a caching issue. Have you tried different browsers or clearing your browser cache?
Are you hosting on Business Catalyst or a third party hosting service?

Similar Messages

  • Muse does not seem to save and upload small changes to site pages.  Can you advise?

    Muse does not seem to save and upload small changes to site pages.  I'm saving changel to the pages as I make them. Can you advise?
    Geo.

    Might be a caching issue. Have you tried different browsers or clearing your browser cache?
    Are you hosting on Business Catalyst or a third party hosting service?

  • My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

    My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

    Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
    Exactly how were you trying to save a copy of your iPhoto library?
    Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
    We need to know exactly what you did
    And probalby the easiest solution is to load your backup from before you messed things up
    For reference after you get things working
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Dealing with small changes to MS Word source file when creating a form

    I have an MS Word 2007 file that I converted to PDF in Acrobat Professional 9.0 and converted the PDF to a fillable form.  I spent several hours yesterday working with the field types and adding submit buttons/radio buttons, etc.  This morning, my supervisor made a few (slight) changes to the source document.  Must I start all over again with adding the fields, changing the field types and the submit buttons, or is there an easy way to place the form field data over the new file? Copy and paste the fields into the new file?
    The small changes related to some placement of text, and not changes that could be made with the touch-up text or typewriter tools.

    The steps:
    1. Create the new PDF of the WORD document.
    2. Open a COPY of the old form.
    3. Use DOCUMENT>Replace pages to replace the page of the old PDF with the new PDF document.
    4. Save the form.
    If you created the form in Designer, this may not work and you may have to look for a solution in Designer (LiveCycle forum). I suspect this may be an issue if you are new to Acrobat and likely ended up making the form in Designer. For a form created with the form tools under TOOLS in Acrobat, the above steps will do the job. Keep in mind that form fields are not a part of the PDF document, but are markup. That is why the replace pages works.

  • Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

    If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc.  So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made.  I don't want to introduce issues by mass-recompiling to the latest version.
    What is best practice in this case?  I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
    Any ideas?  
    Solved!
    Go to Solution.

    The report is a great idea!  I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason.  Those files have sure come in handy!
    Also- its a good idea to make an image of the target as accepted and archive it somewhere.  ESPECIALLY for PXI based systems from NI.  (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
    Jeff

  • How to change default save as location

    hi,
    how to change default save as location in acrobat 7.0?

    Why is Acrobat involved in this process at all? Why don't you save directly the pdf from your email program directly where you want it to be? Acrobat is just adding another step to this process.

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • FRM-40401 No changes to save  error

    Hi,
    I have updated one table from form by writing update statement on the when-button-pressed triger.This update statement is doing its job fine and the table is updated.but iam finding 'FRM-40401: No Changes to save 'message in my console . Please tell me why it is coming when changes are made into tables and wat should i do to avoid this . i have written on-error trigger on form level to suppress this message.What effect itcan have on my working.
    Kindly take it on urgent basis.
    regards,
    rajesh

    Usually in Forms, you do not write SQL update statements to update your table. Instead, you create a base-table block, fetch the rows into the block, make your changes, and then commit. Forms automatic processing takes over and creates the update statements for you.
    What you have done is bypassed the default automatic processing, and Forms is complaining. I would try to re-do the form and use a base-table block.

  • A seeming small change by Verizon causes major monetary and unrecovera​ble damages

    A seeming small change by Verizon causes major monetary and unrecoverable damages
    Back, I think in March or so, Verizon changed how they bill. Prior to this time frame my elderly mom paid the phone bill and I paid the DSL bill. The DSL bill came on my name and I paid by credit card and the phone bill came under her name and she paid by direct debit. She will not use a computer.
    So, they make both bills on her name and won't change it. They did, however, allow the payment from my credit card.
    The first unfortunate consequence was the internet speed suddenly dropped in speed by a factor of 2 to 1.5/364 and it did take me probably a month to notice it. NO ONE that I called was able to find the problem. It took multiple attempts until some bright “call in technician” said the problem is on their end and could be fixed in software. Thus, I believe, because of the name change, the provision changed too. The phone line crapped out too at this time.
    The troubleshooting was stupid too. I took another modem and connected it directly to the NID and directly to the laptop and the technician on the phone said, it's either in your house or your modem and wanted to send me a new modem which they did. I don' get it. This is the wrong conclusion.
    This shows the need of modems like Westell 2200 and the Westell 6100 because of the ability to measure line statistics and provisioned data rates.
    Verizon sent me a D-link model DSL-2750B modem which I have to return because its just plain old stupid. It boasts Wireless n and the wired ports are 10/100. What's up with that? Next, there are no line stats and a horrible interface, akin to Verizon's website. Still can't figure out how to put it in Bridge mode. I own a D-link repeater and the interface is fine.
    I asked them what modem they would send me and they would not tell me, so I got whatever piece of junk they had lying around.
    I have now purchased a Network RAID array with no wireless access and with ~400 mb/s access rates. Yep, really stupid router.
    Because of the number of outages, I have to be able to quickly switch from a bridge connected modem, Westel 6100) to one that is connected in direct mode, a Westell 2200 It's almost easy, but not quite, since the equipment is up in the rafters in the laundry room. The DSL cable is commercial terminated CAT5, which is rare. The modem is within 6' of the NID.
    Plans include, the ability to switch the DSL line with a switch with positions for Modem #1 (Bridge), Modem #2(Wired), #3(RJ11 – Normal wiring) and #4: RJ-11 (Reverse wiring) and moving the direct connect jack for easy access. In any event, testing with the DSL modem at the NID is the gold standard.
    In progress, is a 48 port Gigabit patch panel for phone and Ethernet, A separate 24 port RED patch panel will be bridged for phone.
    I have already upgraded my network infrastructure to include a UPS for the network infrastructure and POE (Power over Ethernet) for the DSL modem. The UPS backup does not backup a repeater although it may in the future.
    Now, let's go back to this seeming innocuous billing change.
    So, this constant having to access the modem in the alternate configuration and a medical condition (migraines) that makes it hard to think clearly. So, in one of these episodes, I placed my laptop on top a container that was soaking laundry.
    So, the LCD screen has to be replaced at $300 and the battery had to be replaced. Then the Ethernet cord to the modem got pulled and caused the laptop to fall on the floor. It worked for a few weeks and then suffered an UNRECOVERABE hard drive crash.
    During this time frame, in fact over a 2 day period. My mom ended up in the hospital and to a rehab facility. My car ended up staying in the shop for a few days because of parts unavailability. My hard drive crashed and their was water in the basement. I don't have time for this.
    Recovery would have cost $2004.00, if it were possible. I only have a drive image from 2011 which I have yet to try to use. I' now running UBUNTU Live rather than Windows 7 Pro. Some of the very important stuff was backed up on Flash, but a lot of stuff is gone forever.
    Plans are to contact the billing office and the attorney general's office in the state where billing questions need to be resolved.
    The last outage, fixed on July 27, was flagged as a phone outage by Verizon, when 18 routers supposedly died. 18 routers suspiciously means that they they were not adequately protected against surges. Verizon should look at the way DelMarVa Power reports outages: see: Delmarva,  Put the usual World Wide Web Prefix and the COMercial domain suffix
    For god's sake, quit making the website circular. I though Yahoo was the expert in that. I never visit Verizon's website unless there are problems. I mistaking thought I could find outage information, say using my phone's browser. This time I had to purchase service from CLEAR internet to ride me through this fix.
    I know, you can't fix stupid and you can always find a better idiot. Comcast is looking more attractive.
    Compensation of or my loss I will probably never get, but maybe with the help of the attorney general I can get the billing fixed. I do have power of attorney. Now, of course, the name the Verizon Website addresses me as is not right on this forum.
    All, basically because of Verizon's unreliable network, incompetent people and the lack of maintenance of copper lines. The problem is, “We have little choice”. Currently, we need traditional land-line service to support an Emergency Response system. It's unclear whether digital phone lines support Faxes and alarm monitoring reliably.
    I'll bet that there is NO WAY to tell Verizon if a service address as special needs like Emergency Medical reporting via phone or Internet, so that priorities for repair can be done properly. Utilities have that capability. Those ares with people with oxygen generators or other medical equipment get a higher priority,

    That should not be happening.  I sympathize with both of you (you and the the person who strated this thread).  That sounds like the reason I would never want Dish. 
    I am fortunate that my service with Verizon Fios has been very reliable and that I haven't had too many issues over the years.  But don't get me started on Verizon Wireless.  I am through with doing any more business with them once my cell phone minutes run out.  I love it when they say they have done everything the could to investigate such a simple issue with running my debit card transaction wrong and blaming it on my bank, i.e. running it through as a "debit" when I choose "credit" all of a sudden now  two times in a row after 4 years of doing it right as "credit".  And now they consider the issue closed on their end when nothing has been resolved.  That's no way to treat a long time customer and I really felt treated like I was a bother to them.  It's not like I ever paid them much money for this pre-paid cell phone service that I have used infrequently but I was really mad at the way they just wrote this off and pretty much told me "too bad".  Talk about "customer non-service".  It's also very hard to track the number of minutes left on my balance.  I'm due for an upgrade anyway.  I want to switch to the I-Phone from this flip phone but never again with Verizon Wireless.  T-Mobile is way more attractive.  Verizon  Wireless is not only an entity separatedfrom Fios but it's definitely a much different animal and their customer service has really gone downhill.  When you're treated like they don't care, it's maddening.
    My customer service experience with Fios overall has been far superior to that most of the time.  My setup is simple and even though there are some people who will inevitably complain about anything just to vent, I definitely believe at least some of what is posted here.  And switching TV, phone, and Internet providers is a lot more involved than switching a cell phone provider. 

  • I've doubled my RAM but still can't save big files in photoshop...

    I have just upgraded my Ram from the shipped 4GB to 8GB but I still can't save big images in photoshop. It seems to have made no difference to the speed of general tasks and saving and I can't save big files in photoshop at all. I already moved massive amounts of files off my computer and onto my external hard drive, so there is much less in my computer now, and twice the RAM but it is making no noticeable difference. When I click memory, under 'about my mac' it shows that the RAM is installed and now has twice the memory. Could this be something to do with photoshop? I'm running CS6.

    Also, I just calculated 220 cm into inches and this is roughly 86.5 inches. Over 7 feet in length.
    WIth an image that large, you may want to consider down sampling to a lower DPI to help with being able to work on and process images of this size much easier and it will be easier for your Print house to process, as well.
    You might want to consider working with these rather large images at 225 DPI instead of 300 if resolution at close distances is still a concern.
    Or what you good try is working with the images at 300 DPI, but then save them/export them as a Jpeg image at the highest image quality setting.
    I do a lot of project where I use a high resolution jpeg image to save on image proceesing overhead.
    The final printed images still come out pretty clear, clean and crisp without having to process those large files at a print house or having to deal with using that full resolution image in a page layout or illustration program.

  • Woundering how to change the "save as dialog / window" in Reader X ?

    Hi
    I am woundering if there is possible to change the "save as window" in Adobe Reader X. I want this to be the same as the "open window", where you get more browse options.
    Regards Frode - Netscenario.no

    You may use the forum for Adobe Reader.

  • I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

    I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
    What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
    Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

    I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
    Working with a Retina Macbook Pro and current software
    These are newly created documents

  • Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Drag the Library from the Pictures folder to the Users/Shared folder. I would point out that folks doing this on 10.6 and later frequently meet permissions issues. You might do better moving it to an appropriately formatted External Disk.

  • Small changes to a web gallery slows iPhoto down to a crawl

    I am using iPhoto 7.1.1, the latest update at this time. I have a large number of web galleries published through iPhoto to .Mac. The latest is about 150 photos from Christmas. I originally published without changing the photo titles. I have been correcting that plus adding a few more photos. Any small change in a web gallery seems to be immediately published and that slows iPhoto down to a crawl. I have the fastest connection I can get from ATT's UVerse. Is there any way to turn off this immediate updating so I can make all of my changes then publish after that? I have been searching through the help files, Apple support, and the web and can't find anything. One poster on this site said his updates don't transfer until he hits the publish icon to the right of the gallery name. That's not how mine works. It automatically publishes at the slightest change. Others seem to say it is automatic for them as it is for me. It really is almost impossible to make lots of small changes to a large gallery (like adding descriptive titles) the way it is now.

    This "feature" also makes my nuts. I hate software that does these "automatic" processes, without a way for the user to alter them, or turn them off. I have been trying to change file names in one album that contains a number of images drawn from other albums that have been published to my web gallery. I do not wish the names to be changed in every album, nor in the web galleries published. But it all seems to be automatic. The name change first is applied automatically to the other albums that contain that image, and then automatically changed in every web gallery.
    I have posted these comments here: iPhoto menu -> Provide iPhoto Feedback.
    I suggest everyone that is concerned with these issues do the same. If we are lucky, Apple will soon update the software. These changes seem so easy to achieve one would think, and they would add a lot of control to the use of the program.
    Jim

  • Editing timelapses in Lightroom- looks very different if there´s a small change within the frame

    Hi
    We´re having some serious issues with editing timelapses in Lightroom (5.6). What seems to happen over and over again, is that if there´s a small change within the frame (such as a bird flying past, people walking), the editing result varies greatly compared to the previoius frame. It´s easiest to understand what I mean by viewing the examples below.
    Here there´s one picture without a boat in the frame, and a few seconds later there´s a boat in a small part of the frame. The camera is set to full manual, and the two JPGs which show the unedited pictures shows that the background and sky in both pictures look exactly the same. However, after pasting the same editing setting on both pictures, the picture with the boat looks vastly different (shadow areas are much darker). It´s the same result weather it is a white boat, a black bird or a person walking in/out of the frame. The picture gets much darker, and leads to some serious flicker in the timelapse which can be impossible to get rid of.
    I assume that as there´s a small change in the histogram when the boat enters the frame, this change affects what Lightroom thinks of as shadows/highlights on so on? The example below has some heavy editing applied (shadows up, highlights down, clarity). You can see the settings that have been adjusted in the screenshots below. Does LR change what it considers shadows/highlights based on the histogram, or are there standard settings? If this is the case, it would be much better for timelapsers if Lightroom had standard values for what is considered shadows/highlights, so that two pictures where the only difference is a person walking on the street or not, would look the same with the same editing settings applied. What I find strange if LR works like I´m asking here, why does the picture get darker whether it is a white boat or a black bird changing the histogram slightly. Shouldn´t they then have the opposite effect of each other?
    Any ideas what is causing the difference, and what I can do about it? Thanks!

    In these forums you are only talking to other users like yourself, not Apple. Be sure to repost your info in the channel Apple has set up for it:
    http://www.apple.com/feedback/imovie_iOS.html

Maybe you are looking for